Add support for SBI FWFT extension testing
Subsystems (3)
v2 cover Add support for SBI FWFT extension testing
This series adds a minimal set of tests for the FWFT extension. Reserved range as well as misaligned exception delegation. A commit coming from the SSE tests series is also included in this series to add -deps makefile notation.
---
V2:
- Added fwft_{get/set}_raw() to test invalid > 32 bits ids
- Added test for invalid flags/value > 32 bits
- Added test for lock feature
- Use and enum for FWFT functions
- Replace hardcoded 1 << with BIT()
- Fix fwft_get/set return value
- Split set/get tests for reserved ranges
- Added push/pop to arch -c option
- Remove leftover of manual probing code
Clément Léger (2):
riscv: Add "-deps" handling for tests
riscv: Add tests for SBI FWFT extension
riscv/Makefile | 8 +- lib/riscv/asm/sbi.h | 34 ++++++++ riscv/sbi-fwft.c | 189 ++++++++++++++++++++++++++++++++++++++++++++ riscv/sbi.c | 3 + 4 files changed, 231 insertions(+), 3 deletions(-) create mode 100644 riscv/sbi-fwft.c
Signature · 1 line
2.47.1
PATCH v2 1/2 riscv: Add "-deps" handling for tests
Some tests uses additional files that needs to be linked in the final binary. This is the case for asm-sbi.S which is only used by the sbi test. Add a "-deps" per test variable that allows to designate additional .o files.
--- riscv/Makefile | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
riscv/Makefile +5 -3
@@ -17,6 +17,8 @@ tests += $(TEST_DIR)/sieve.$(exe) all: $(tests) +$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o + # When built for EFI sieve needs extra memory, run with e.g. '-m 256' on QEMU $(TEST_DIR)/sieve.$(exe): AUXFLAGS = 0x1
@@ -44,7 +46,6 @@ cflatobjs += lib/riscv/timer.o ifeq ($(ARCH),riscv32) cflatobjs += lib/ldiv32.o endif -cflatobjs += riscv/sbi-asm.o ########################################
@@ -93,6 +94,7 @@ include $(SRCDIR)/scripts/asm-offsets.mak $(CC) $(CFLAGS) -c -o $@ $< \ -DPROGNAME=\"$(notdir $(@:.aux.o=.$(exe)))\" -DAUXFLAGS=$(AUXFLAGS) +.SECONDEXPANSION: ifeq ($(CONFIG_EFI),y) # avoid jump tables before all relocations have been processed riscv/efi/reloc_riscv64.o: CFLAGS += -fno-jump-tables
@@ -103,7 +105,7 @@ cflatobjs += lib/efi.o .PRECIOUS: %.so %.so: EFI_LDFLAGS += -defsym=EFI_SUBSYSTEM=0xa --no-undefined -%.so: %.o $(FLATLIBS) $(SRCDIR)/riscv/efi/elf_riscv64_efi.lds $(cstart.o) %.aux.o +%.so: %.o $(FLATLIBS) $(SRCDIR)/riscv/efi/elf_riscv64_efi.lds $(cstart.o) %.aux.o $$($$*-deps) $(LD) $(EFI_LDFLAGS) -o $@ -T $(SRCDIR)/riscv/efi/elf_riscv64_efi.lds \ $(filter %.o, $^) $(FLATLIBS) $(EFI_LIBS)
@@ -119,7 +121,7 @@ cflatobjs += lib/efi.o -O binary $^ $@ else %.elf: LDFLAGS += -pie -n -z notext -%.elf: %.o $(FLATLIBS) $(SRCDIR)/riscv/flat.lds $(cstart.o) %.aux.o +%.elf: %.o $(FLATLIBS) $(SRCDIR)/riscv/flat.lds $(cstart.o) %.aux.o $$($$*-deps) $(LD) $(LDFLAGS) -o $@ -T $(SRCDIR)/riscv/flat.lds \ $(filter %.o, $^) $(FLATLIBS) @chmod a-x $@
Signature · 1 line
2.47.1
PATCH v2 2/2 riscv: Add tests for SBI FWFT extension
In reply to Clément LégerAdd tests for the FWFT SBI extension. Currently, only the reserved range as well as the misaligned exception delegation are used.
--- riscv/Makefile | 2 +- lib/riscv/asm/sbi.h | 34 ++++++++ riscv/sbi-fwft.c | 189 ++++++++++++++++++++++++++++++++++++++++++++ riscv/sbi.c | 3 + 4 files changed, 227 insertions(+), 1 deletion(-) create mode 100644 riscv/sbi-fwft.c
riscv/Makefile +1 -1
@@ -17,7 +17,7 @@ tests += $(TEST_DIR)/sieve.$(exe) all: $(tests) -$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o +$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o $(TEST_DIR)/sbi-fwft.o # When built for EFI sieve needs extra memory, run with e.g. '-m 256' on QEMU $(TEST_DIR)/sieve.$(exe): AUXFLAGS = 0x1
lib/riscv/asm/sbi.h +34 -0
@@ -11,6 +11,12 @@#define SBI_ERR_ALREADY_AVAILABLE -6#define SBI_ERR_ALREADY_STARTED -7#define SBI_ERR_ALREADY_STOPPED -8 +#define SBI_ERR_NO_SHMEM -9 +#define SBI_ERR_INVALID_STATE -10 +#define SBI_ERR_BAD_RANGE -11 +#define SBI_ERR_TIMEOUT -12 +#define SBI_ERR_IO -13 +#define SBI_ERR_LOCKED -14#ifndef __ASSEMBLY__#include <cpumask.h>
@@ -23,6 +29,7 @@ enum sbi_ext_id {SBI_EXT_SRST =0x53525354 ,SBI_EXT_DBCN =0x4442434E ,SBI_EXT_SUSP =0x53555350 , + SBI_EXT_FWFT = 0x46574654, }; enum sbi_ext_base_fid {
@@ -71,6 +78,33 @@ enum sbi_ext_dbcn_fid { SBI_EXT_DBCN_CONSOLE_WRITE_BYTE, }; + +enum sbi_ext_fwft_fid { +SBI_EXT_FWFT_SET =0 , +SBI_EXT_FWFT_GET , +}; + +#define SBI_FWFT_MISALIGNED_EXC_DELEG 0x0 +#define SBI_FWFT_LANDING_PAD 0x1 +#define SBI_FWFT_SHADOW_STACK 0x2 +#define SBI_FWFT_DOUBLE_TRAP 0x3 +#define SBI_FWFT_PTE_AD_HW_UPDATING 0x4 +#define SBI_FWFT_POINTER_MASKING_PMLEN 0x5 +#define SBI_FWFT_LOCAL_RESERVED_START 0x6 +#define SBI_FWFT_LOCAL_RESERVED_END 0x3fffffff +#define SBI_FWFT_LOCAL_PLATFORM_START 0x40000000 +#define SBI_FWFT_LOCAL_PLATFORM_END 0x7fffffff + +#define SBI_FWFT_GLOBAL_RESERVED_START 0x80000000 +#define SBI_FWFT_GLOBAL_RESERVED_END 0xbfffffff +#define SBI_FWFT_GLOBAL_PLATFORM_START 0xc0000000 +#define SBI_FWFT_GLOBAL_PLATFORM_END 0xffffffff + +#define SBI_FWFT_PLATFORM_FEATURE_BIT BIT(30) +#define SBI_FWFT_GLOBAL_FEATURE_BIT BIT(31) + +#define SBI_FWFT_SET_FLAG_LOCK BIT(0) +struct sbiret {long error;long value;
riscv/sbi-fwft.c new file +189 -0
189 lines not on this page · raw message
riscv/sbi.c +3 -0
@@ -32,6 +32,8 @@#define HIGH_ADDR_BOUNDARY ((phys_addr_t)1 << 32) +void check_fwft (void ); +static long __labs (long a) {return __builtin_labs (a);
@@ -1451,6 +1453,7 @@ int main(int argc, char **argv)check_hsm ();check_dbcn ();check_susp (); +check_fwft ();return report_summary (); }
Signature · 1 line
2.47.1
Re: [kvm-unit-tests PATCH v2 2/2] riscv: Add tests for SBI FWFT extension
Quoted 120 lines · Clément Léger
Add tests for the FWFT SBI extension. Currently, only the reserved range as well as the misaligned exception delegation are used.
Signed-off-by Clément Léger <[email protected]>--- riscv/Makefile | 2 +- lib/riscv/asm/sbi.h | 34 ++++++++ riscv/sbi-fwft.c | 189 ++++++++++++++++++++++++++++++++++++++++++++ riscv/sbi.c | 3 + 4 files changed, 227 insertions(+), 1 deletion(-) create mode 100644 riscv/sbi-fwft.criscv/Makefile +1
-1@@ -17,7 +17,7 @@ tests += $(TEST_DIR)/sieve.$(exe) all: $(tests) -$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o +$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o $(TEST_DIR)/sbi-fwft.o # When built for EFI sieve needs extra memory, run with e.g. '-m 256' on QEMU $(TEST_DIR)/sieve.$(exe): AUXFLAGS = 0x1lib/riscv/asm/sbi.h +34
-0@@ -11,6 +11,12 @@#define SBI_ERR_ALREADY_AVAILABLE -6#define SBI_ERR_ALREADY_STARTED -7#define SBI_ERR_ALREADY_STOPPED -8 +#define SBI_ERR_NO_SHMEM -9 +#define SBI_ERR_INVALID_STATE -10 +#define SBI_ERR_BAD_RANGE -11 +#define SBI_ERR_TIMEOUT -12 +#define SBI_ERR_IO -13 +#define SBI_ERR_LOCKED -14#ifndef __ASSEMBLY__#include <cpumask.h> @@ -23,6 +29,7 @@ enum sbi_ext_id {SBI_EXT_SRST =0x53525354 ,SBI_EXT_DBCN =0x4442434E ,SBI_EXT_SUSP =0x53555350 , + SBI_EXT_FWFT = 0x46574654, }; enum sbi_ext_base_fid {@@ -71,6 +78,33 @@ enum sbi_ext_dbcn_fid { SBI_EXT_DBCN_CONSOLE_WRITE_BYTE, }; + +enum sbi_ext_fwft_fid { +SBI_EXT_FWFT_SET =0 , +SBI_EXT_FWFT_GET , +}; + +#define SBI_FWFT_MISALIGNED_EXC_DELEG 0x0 +#define SBI_FWFT_LANDING_PAD 0x1 +#define SBI_FWFT_SHADOW_STACK 0x2 +#define SBI_FWFT_DOUBLE_TRAP 0x3 +#define SBI_FWFT_PTE_AD_HW_UPDATING 0x4 +#define SBI_FWFT_POINTER_MASKING_PMLEN 0x5 +#define SBI_FWFT_LOCAL_RESERVED_START 0x6 +#define SBI_FWFT_LOCAL_RESERVED_END 0x3fffffff +#define SBI_FWFT_LOCAL_PLATFORM_START 0x40000000 +#define SBI_FWFT_LOCAL_PLATFORM_END 0x7fffffff + +#define SBI_FWFT_GLOBAL_RESERVED_START 0x80000000 +#define SBI_FWFT_GLOBAL_RESERVED_END 0xbfffffff +#define SBI_FWFT_GLOBAL_PLATFORM_START 0xc0000000 +#define SBI_FWFT_GLOBAL_PLATFORM_END 0xffffffff + +#define SBI_FWFT_PLATFORM_FEATURE_BIT BIT(30) +#define SBI_FWFT_GLOBAL_FEATURE_BIT BIT(31) + +#define SBI_FWFT_SET_FLAG_LOCK BIT(0) +struct sbiret {long error;long value;riscv/sbi-fwft.c new file +30
-0@@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* SBI verification +* +* Copyright (C) 2024, Rivos Inc., Clément Léger <[email protected]> +*/ +#include <libcflat.h> +#include <stdlib.h> + +#include <asm/csr.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/sbi.h> + +void check_fwft (void ); + + +static struct sbiret fwft_set_raw (unsigned long feature_id,unsigned long value, +unsigned long flags) +{ +return sbi_ecall (SBI_EXT_FWFT ,SBI_EXT_FWFT_SET , feature_id, value, + flags,0 ,0 ,0 ); +} + +static struct sbiret fwft_set (uint32_t feature_id,unsigned long value, +unsigned long flags) +{ +return fwft_set_raw (feature_id, value, flags); +} +
riscv/sbi-fwft.c line 40
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+static struct sbiret fwft_get_raw (unsigned long feature_id) +{ +return sbi_ecall (SBI_EXT_FWFT ,SBI_EXT_FWFT_GET , feature_id,0 ,0 ,0 ,0 , +0 ); +} + +static struct sbiret fwft_get (uint32_t feature_id) +{ +return fwft_get_raw (feature_id); +}
nit: s/feature_id/feature/ for all the above, as that would exactly match the spec, but no biggy.
riscv/sbi-fwft.c line 52
Quoted 12 lines
riscv/sbi-fwft.c new file +12
-0+ +static void fwft_check_reserved (unsigned long id) +{ +struct sbiret ret; + + ret =fwft_get (id); +report (ret.error ==SBI_ERR_DENIED , +"get reserved feature 0x%lx error == SBI_ERR_DENIED" , id); + + ret =fwft_set (id,1 ,0 ); +report (ret.error ==SBI_ERR_DENIED , +"set reserved feature 0x%lx error == SBI_ERR_DENIED" , id);
I think we need something like gen_report(), which is in riscv/sbi.c, in order to output the unexpected errors if we don't get what we expect. I've pushed a few patches to my riscv/sbi branch[1] in order to provide sbiret_report_error().
[1] https://gitlab.com/jones-drew/kvm-unit-tests/-/commits/riscv/sbi
Quoted 8 lines
riscv/sbi-fwft.c new file +8
-0+} + +static void fwft_check_base (void ) +{ +struct sbiret ret; + +report_prefix_push ("base" ); +
riscv/sbi-fwft.c line 70
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+fwft_check_reserved (SBI_FWFT_LOCAL_RESERVED_START ); +fwft_check_reserved (SBI_FWFT_LOCAL_RESERVED_END ); +fwft_check_reserved (SBI_FWFT_GLOBAL_RESERVED_START ); +fwft_check_reserved (SBI_FWFT_GLOBAL_RESERVED_END ); + +/* Check id > 32 bits */ +if (__riscv_xlen >32 ) { + ret =fwft_get_raw (BIT (32 )); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"get feature 0x%lx error == SBI_ERR_INVALID_PARAM" ,BIT (32 ));
Need to indent the string under ret.error.
riscv/sbi-fwft.c line 74
Quoted 4 lines
riscv/sbi-fwft.c new file +4
-0+ + ret =fwft_set_raw (BIT (32 ),0 ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"set feature 0x%lx error == SBI_ERR_INVALID_PARAM" ,BIT (32 ));
Need to indent the string under ret.error.
Quoted 18 lines
riscv/sbi-fwft.c new file +18
-0+ } + +report_prefix_pop (); +} + +static bool misaligned_handled; + +static void misaligned_handler (struct pt_regs *regs) +{ + misaligned_handled = true; + regs->epc +=4 ; +} + +static void fwft_check_misaligned_exc_deleg (void ) +{ +struct sbiret ret; + +report_prefix_push ("misaligned_exc_deleg" );
riscv/sbi-fwft.c line 102
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+ + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +return ; + } +report (!ret.error,"Get misaligned deleg feature no error: %lx" , + ret.error); +if (ret.error) +return ;
With the new sbiret_report_error() this can become
if (!sbiret_report_error(ret, 0, "Get misaligned deleg feature no error"))
return;
riscv/sbi-fwft.c line 109
Quoted 7 lines
riscv/sbi-fwft.c new file +7
-0+ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,2 ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg feature invalid value error" ); + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0xFFFFFFFF ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg feature invalid value error" );
Need sbiret_report_error() to ensure we can see what the returned error was if it isn't what we expected.
We should have a different error message for each test so testers can look up the one that failed by the message. Maybe just output the invalid test value too.
riscv/sbi-fwft.c line 118
Quoted 9 lines
riscv/sbi-fwft.c new file +9
-0+ +if (__riscv_xlen >32 ) { + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,BIT (32 ),0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg with value > 32bits invalid param error" ); + + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,BIT (32 )); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg with flag > 32bits invalid param error" );
Same two comments as above.
riscv/sbi-fwft.c line 123
Quoted 5 lines
riscv/sbi-fwft.c new file +5
-0+ } + +/* Set to 0 and check after with get */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 ); +report (!ret.error,"Set misaligned deleg feature value no error" );
sbiret_report_error()
riscv/sbi-fwft.c line 129
Quoted 6 lines
riscv/sbi-fwft.c new file +6
-0+ ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error) +report_fail ("Get misaligned deleg feature after set: %lx" , + ret.error); +else +report (ret.value ==0 ,"Set misaligned deleg feature value 0" );
sbiret_report(ret, 0, 0, "get/set misaligned deleg feature value 0")
riscv/sbi-fwft.c line 139
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+ +/* Set to 1 and check after with get */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 ); +report (!ret.error,"Set misaligned deleg feature value no error" ); + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error) +report_fail ("Get misaligned deleg feature after set: %lx" , + ret.error); +else +report (ret.value ==1 ,"Set misaligned deleg feature value 1" );
Same sbiret_report_error / sbiret_report comments as above.
We should get SBI_ERR_NOT_SUPPORTED if the platform doesn't support delegating misaligned exceptions, right? If so, then we should tolerate that and skip the trap test below.
riscv/sbi-fwft.c line 149
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+ +install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler); + + asmvolatile ( +".option push\n" +/* +* Disable compression so the lw takes exactly 4 bytes and thus +* can be skipped reliably from the exception handler. +*/ + ".option arch,-c\n"
What's the difference between this and .option norvc ?
riscv/sbi-fwft.c line 157
Quoted 8 lines
riscv/sbi-fwft.c new file +8
-0+"lw %[val], 1(%[val_addr])\n" +".option pop\n" + : [val] "+r" (ret.value) + : [val_addr] "r" (&ret.value) + : "memory"); + +if (!misaligned_handled) +report_skip ("Verify misaligned load exception trap in supervisor" );
If we skip this test when we can't set SBI_FWFT_MISALIGNED_EXC_DELEG to 1, then we should always fail this test when we don't get the exception.
riscv/sbi-fwft.c line 170
Quoted 13 lines
riscv/sbi-fwft.c new file +13
-0+else +report_pass ("Verify misaligned load exception trap in supervisor" ); + +install_exception_handler (EXC_LOAD_MISALIGNED ,NULL ); + +/* Lock the feature */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,SBI_FWFT_SET_FLAG_LOCK ); +report (!ret.error,"Set misaligned deleg feature value 0 and lock no error" ); + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 ); +report (ret.error ==SBI_ERR_LOCKED , +"Set misaligned deleg feature value 0 and lock no error" ); + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +report (!ret.error,"Get misaligned deleg locked value no error" );
Need sbiret_report_error() for all these tests.
Quoted 43 lines
riscv/sbi-fwft.c new file +19
-0+ +report_prefix_pop (); +} + +void check_fwft (void ) +{ +report_prefix_push ("fwft" ); + +if (!sbi_probe (SBI_EXT_FWFT )) { +report_skip ("FWFT extension not available" ); +report_prefix_pop (); +return ; + } + +fwft_check_base (); +fwft_check_misaligned_exc_deleg (); + +report_prefix_pop (); +}riscv/sbi.c +3
-0@@ -32,6 +32,8 @@#define HIGH_ADDR_BOUNDARY ((phys_addr_t)1 << 32) +void check_fwft (void ); +static long __labs (long a) {return __builtin_labs (a);@@ -1451,6 +1453,7 @@ int main(int argc, char **argv)check_hsm ();check_dbcn ();check_susp (); +check_fwft ();return report_summary (); }Signature · 1 line
2.47.1
Thanks,
drew
Re: [kvm-unit-tests PATCH v2 2/2] riscv: Add tests for SBI FWFT extension
Quoted 153 lines · Andrew Jones
Quoted 120 lines · Clément Léger
Add tests for the FWFT SBI extension. Currently, only the reserved range as well as the misaligned exception delegation are used.
Signed-off-by Clément Léger <[email protected]>--- riscv/Makefile | 2 +- lib/riscv/asm/sbi.h | 34 ++++++++ riscv/sbi-fwft.c | 189 ++++++++++++++++++++++++++++++++++++++++++++ riscv/sbi.c | 3 + 4 files changed, 227 insertions(+), 1 deletion(-) create mode 100644 riscv/sbi-fwft.criscv/Makefile +1
-1@@ -17,7 +17,7 @@ tests += $(TEST_DIR)/sieve.$(exe) all: $(tests) -$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o +$(TEST_DIR)/sbi-deps = $(TEST_DIR)/sbi-asm.o $(TEST_DIR)/sbi-fwft.o # When built for EFI sieve needs extra memory, run with e.g. '-m 256' on QEMU $(TEST_DIR)/sieve.$(exe): AUXFLAGS = 0x1lib/riscv/asm/sbi.h +34
-0@@ -11,6 +11,12 @@#define SBI_ERR_ALREADY_AVAILABLE -6#define SBI_ERR_ALREADY_STARTED -7#define SBI_ERR_ALREADY_STOPPED -8 +#define SBI_ERR_NO_SHMEM -9 +#define SBI_ERR_INVALID_STATE -10 +#define SBI_ERR_BAD_RANGE -11 +#define SBI_ERR_TIMEOUT -12 +#define SBI_ERR_IO -13 +#define SBI_ERR_LOCKED -14#ifndef __ASSEMBLY__#include <cpumask.h> @@ -23,6 +29,7 @@ enum sbi_ext_id {SBI_EXT_SRST =0x53525354 ,SBI_EXT_DBCN =0x4442434E ,SBI_EXT_SUSP =0x53555350 , + SBI_EXT_FWFT = 0x46574654, }; enum sbi_ext_base_fid {@@ -71,6 +78,33 @@ enum sbi_ext_dbcn_fid { SBI_EXT_DBCN_CONSOLE_WRITE_BYTE, }; + +enum sbi_ext_fwft_fid { +SBI_EXT_FWFT_SET =0 , +SBI_EXT_FWFT_GET , +}; + +#define SBI_FWFT_MISALIGNED_EXC_DELEG 0x0 +#define SBI_FWFT_LANDING_PAD 0x1 +#define SBI_FWFT_SHADOW_STACK 0x2 +#define SBI_FWFT_DOUBLE_TRAP 0x3 +#define SBI_FWFT_PTE_AD_HW_UPDATING 0x4 +#define SBI_FWFT_POINTER_MASKING_PMLEN 0x5 +#define SBI_FWFT_LOCAL_RESERVED_START 0x6 +#define SBI_FWFT_LOCAL_RESERVED_END 0x3fffffff +#define SBI_FWFT_LOCAL_PLATFORM_START 0x40000000 +#define SBI_FWFT_LOCAL_PLATFORM_END 0x7fffffff + +#define SBI_FWFT_GLOBAL_RESERVED_START 0x80000000 +#define SBI_FWFT_GLOBAL_RESERVED_END 0xbfffffff +#define SBI_FWFT_GLOBAL_PLATFORM_START 0xc0000000 +#define SBI_FWFT_GLOBAL_PLATFORM_END 0xffffffff + +#define SBI_FWFT_PLATFORM_FEATURE_BIT BIT(30) +#define SBI_FWFT_GLOBAL_FEATURE_BIT BIT(31) + +#define SBI_FWFT_SET_FLAG_LOCK BIT(0) +struct sbiret {long error;long value;riscv/sbi-fwft.c new file +30
-0@@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* SBI verification +* +* Copyright (C) 2024, Rivos Inc., Clément Léger <[email protected]> +*/ +#include <libcflat.h> +#include <stdlib.h> + +#include <asm/csr.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/sbi.h> + +void check_fwft (void ); + + +static struct sbiret fwft_set_raw (unsigned long feature_id,unsigned long value, +unsigned long flags) +{ +return sbi_ecall (SBI_EXT_FWFT ,SBI_EXT_FWFT_SET , feature_id, value, + flags,0 ,0 ,0 ); +} + +static struct sbiret fwft_set (uint32_t feature_id,unsigned long value, +unsigned long flags) +{ +return fwft_set_raw (feature_id, value, flags); +} +riscv/sbi-fwft.c line 40
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+static struct sbiret fwft_get_raw (unsigned long feature_id) +{ +return sbi_ecall (SBI_EXT_FWFT ,SBI_EXT_FWFT_GET , feature_id,0 ,0 ,0 ,0 , +0 ); +} + +static struct sbiret fwft_get (uint32_t feature_id) +{ +return fwft_get_raw (feature_id); +}nit: s/feature_id/feature/ for all the above, as that would exactly match the spec, but no biggy.
riscv/sbi-fwft.c line 52
Quoted 12 lines
riscv/sbi-fwft.c new file +12
-0+ +static void fwft_check_reserved (unsigned long id) +{ +struct sbiret ret; + + ret =fwft_get (id); +report (ret.error ==SBI_ERR_DENIED , +"get reserved feature 0x%lx error == SBI_ERR_DENIED" , id); + + ret =fwft_set (id,1 ,0 ); +report (ret.error ==SBI_ERR_DENIED , +"set reserved feature 0x%lx error == SBI_ERR_DENIED" , id);I think we need something like
gen_report(), which is inriscv/sbi.c, in order to output the unexpected errors if we don't get what we expect. I've pushed a few patches to my riscv/sbi branch[1] in order to providesbiret_report_error().
Quoted 1 line
[1] https://gitlab.com/jones-drew/kvm-unit-tests/-/commits/riscv/sbi
Ok sounds good, I'll use that function. And I'll do that on SSE testing as well.
Quoted 74 lines
Quoted 9 lines
riscv/sbi-fwft.c new file +8
-0+} + +static void fwft_check_base (void ) +{ +struct sbiret ret; + +report_prefix_push ("base" ); +riscv/sbi-fwft.c line 70
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+fwft_check_reserved (SBI_FWFT_LOCAL_RESERVED_START ); +fwft_check_reserved (SBI_FWFT_LOCAL_RESERVED_END ); +fwft_check_reserved (SBI_FWFT_GLOBAL_RESERVED_START ); +fwft_check_reserved (SBI_FWFT_GLOBAL_RESERVED_END ); + +/* Check id > 32 bits */ +if (__riscv_xlen >32 ) { + ret =fwft_get_raw (BIT (32 )); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"get feature 0x%lx error == SBI_ERR_INVALID_PARAM" ,BIT (32 ));Need to indent the string under ret.error.
riscv/sbi-fwft.c line 74
Quoted 4 lines
riscv/sbi-fwft.c new file +4
-0+ + ret =fwft_set_raw (BIT (32 ),0 ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"set feature 0x%lx error == SBI_ERR_INVALID_PARAM" ,BIT (32 ));Need to indent the string under ret.error.
Quoted 18 lines
riscv/sbi-fwft.c new file +18
-0+ } + +report_prefix_pop (); +} + +static bool misaligned_handled; + +static void misaligned_handler (struct pt_regs *regs) +{ + misaligned_handled = true; + regs->epc +=4 ; +} + +static void fwft_check_misaligned_exc_deleg (void ) +{ +struct sbiret ret; + +report_prefix_push ("misaligned_exc_deleg" );riscv/sbi-fwft.c line 102
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+ + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error ==SBI_ERR_NOT_SUPPORTED ) { +report_skip ("SBI_FWFT_MISALIGNED_EXC_DELEG is not supported" ); +return ; + } +report (!ret.error,"Get misaligned deleg feature no error: %lx" , + ret.error); +if (ret.error) +return ;With the new
sbiret_report_error()this can becomeif (!sbiret_report_error(ret, 0, "Get misaligned deleg feature no error"))
return;riscv/sbi-fwft.c line 109
Quoted 7 lines
riscv/sbi-fwft.c new file +7
-0+ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,2 ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg feature invalid value error" ); + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0xFFFFFFFF ,0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg feature invalid value error" );Need
sbiret_report_error()to ensure we can see what the returned error was if it isn't what we expected.
Quoted 3 lines
We should have a different error message for each test so testers can look up the one that failed by the message. Maybe just output the invalid test value too.
Yes sure, I'll include the set value as well.
Quoted 43 lines
riscv/sbi-fwft.c line 118
Quoted 10 lines
riscv/sbi-fwft.c new file +9
-0+ +if (__riscv_xlen >32 ) { + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,BIT (32 ),0 ); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg with value > 32bits invalid param error" ); + + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,BIT (32 )); +report (ret.error ==SBI_ERR_INVALID_PARAM , +"Set misaligned deleg with flag > 32bits invalid param error" );Same two comments as above.
riscv/sbi-fwft.c line 123
Quoted 5 lines
riscv/sbi-fwft.c new file +5
-0+ } + +/* Set to 0 and check after with get */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,0 ); +report (!ret.error,"Set misaligned deleg feature value no error" );
sbiret_report_error()riscv/sbi-fwft.c line 129
Quoted 6 lines
riscv/sbi-fwft.c new file +6
-0+ ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error) +report_fail ("Get misaligned deleg feature after set: %lx" , + ret.error); +else +report (ret.value ==0 ,"Set misaligned deleg feature value 0" );
sbiret_report(ret, 0, 0, "get/set misaligned deleg feature value 0")riscv/sbi-fwft.c line 139
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+ +/* Set to 1 and check after with get */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 ); +report (!ret.error,"Set misaligned deleg feature value no error" ); + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +if (ret.error) +report_fail ("Get misaligned deleg feature after set: %lx" , + ret.error); +else +report (ret.value ==1 ,"Set misaligned deleg feature value 1" );Same
sbiret_report_error/sbiret_reportcomments as above.
Quoted 3 lines
We should get
SBI_ERR_NOT_SUPPORTEDif the platform doesn't support delegating misaligned exceptions, right? If so, then we should tolerate that and skip the trap test below.
I can't find/remember in which discussion it was discussed but the consensus was that it is not an UNSUPPORTED error since the trap exist on all implementations an can always be delegated. So this is actually not and error, the trap is delegated but the platform does not generate any misalign access traps. The S-mode can then check if the platform misaligned accesses traps or not by itself.
Quoted 13 lines
riscv/sbi-fwft.c line 149
Quoted 11 lines
riscv/sbi-fwft.c new file +10
-0+ +install_exception_handler (EXC_LOAD_MISALIGNED , misaligned_handler); + + asmvolatile ( +".option push\n" +/* +* Disable compression so the lw takes exactly 4 bytes and thus +* can be skipped reliably from the exception handler. +*/ + ".option arch,-c\n"What's the difference between this and .option norvc ?
I felt like this is mode generic than norvc/rvc. .arch works with all extension AFAIK, norvc/rvc is purely relevant to C. Both of them works the same way (at least to my trials with it).
Quoted 12 lines
riscv/sbi-fwft.c line 157
Quoted 9 lines
riscv/sbi-fwft.c new file +8
-0+"lw %[val], 1(%[val_addr])\n" +".option pop\n" + : [val] "+r" (ret.value) + : [val_addr] "r" (&ret.value) + : "memory"); + +if (!misaligned_handled) +report_skip ("Verify misaligned load exception trap in supervisor" );If we skip this test when we can't set
SBI_FWFT_MISALIGNED_EXC_DELEGto 1, then we should always fail this test when we don't get the exception.
See my comment above. This is likely to be just an additional information then. ie platform traps upon misaligned accesses. Probably not what you expected though.
Quoted 63 lines
Quoted 4 lines
riscv/sbi-fwft.c new file +3
-0+else +report_pass ("Verify misaligned load exception trap in supervisor" ); +riscv/sbi-fwft.c line 170
Quoted 10 lines
riscv/sbi-fwft.c new file +10
-0+install_exception_handler (EXC_LOAD_MISALIGNED ,NULL ); + +/* Lock the feature */ + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,0 ,SBI_FWFT_SET_FLAG_LOCK ); +report (!ret.error,"Set misaligned deleg feature value 0 and lock no error" ); + ret =fwft_set (SBI_FWFT_MISALIGNED_EXC_DELEG ,1 ,0 ); +report (ret.error ==SBI_ERR_LOCKED , +"Set misaligned deleg feature value 0 and lock no error" ); + ret =fwft_get (SBI_FWFT_MISALIGNED_EXC_DELEG ); +report (!ret.error,"Get misaligned deleg locked value no error" );Need
sbiret_report_error()for all these tests.Quoted 43 lines
riscv/sbi-fwft.c new file +19
-0+ +report_prefix_pop (); +} + +void check_fwft (void ) +{ +report_prefix_push ("fwft" ); + +if (!sbi_probe (SBI_EXT_FWFT )) { +report_skip ("FWFT extension not available" ); +report_prefix_pop (); +return ; + } + +fwft_check_base (); +fwft_check_misaligned_exc_deleg (); + +report_prefix_pop (); +}riscv/sbi.c +3
-0@@ -32,6 +32,8 @@#define HIGH_ADDR_BOUNDARY ((phys_addr_t)1 << 32) +void check_fwft (void ); +static long __labs (long a) {return __builtin_labs (a);@@ -1451,6 +1453,7 @@ int main(int argc, char **argv)check_hsm ();check_dbcn ();check_susp (); +check_fwft ();return report_summary (); }Signature · 1 line
2.47.1Thanks,
drew