arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E
The Radxa ROCK Pi E has USB D+/D- signals on the 40-pin header[1]. Enable it for use as an OTG port.
[1] https://docs.radxa.com/en/rockpi/rockpie/hardware/gpio
Signed-off-by FUKAUMI Naoki <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +8 -0
@@ -428,10 +428,18 @@ &u2phy_host { status = "okay"; }; +&u2phy_otg { + status = "okay"; +}; + &uart2 { status = "okay"; }; +&usb20_otg { + status = "okay"; +}; + &usbdrd3 { dr_mode = "host"; status = "okay";
Signature · 7 lines
2.43.0 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Quoted 6 lines · FUKAUMI Naoki
The Radxa ROCK Pi E has USB D+/D- signals on the 40-pin header[1]. Enable it for use as an OTG port.
Applied, thanks!
[1/1] arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E
commit: 0cd57b5e5dde94129a13f6d2897cdb82f8943f9f
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>