Skip to contentSkip to conversation

arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E

PATCH Applied FUKAUMI Naoki 2 participants 2 messages Jan 29, 2025 – Feb 3, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: rockchip: Enable USB OTG for Radxa ROCK Pi E

The Radxa ROCK Pi E has USB D+/D- signals on the 40-pin header[1]. Enable it for use as an OTG port.

[1] https://docs.radxa.com/en/rockpi/rockpie/hardware/gpio

---
 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +8 -0
index 6310b58de77f..a4bdd87d0729 100644
@@ -428,10 +428,18 @@ &u2phy_host {
 	status = "okay";
 };
 
+&u2phy_otg {
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
 
+&usb20_otg {
+	status = "okay";
+};
+
 &usbdrd3 {
 	dr_mode = "host";
 	status = "okay";
Signature · 7 lines
2.43.0


_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip