Skip to contentSkip to conversation

int3472: Support GPIO con_id based on _HID

PATCH In review Sakari Ailus 4 participants 11 messages Feb 11, 2025

Subsystems (3)
lore
Share & tools
lore

Sakari Ailus

author maintainer
#0 lore raw

v7 cover int3472: Support GPIO con_id based on _HID

One patch turned into a set, the second patch being the original one.

since v6:

- Reword the comment regarding GPIO map processing.

Sakari Ailus (3):
platform/x86: int3472: Use correct type for "polarity", call it
gpio_flags
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E platform/x86: int3472: Call "func" "con_id" instead

 drivers/platform/x86/intel/int3472/discrete.c | 105 +++++++++++++-----
 1 file changed, 75 insertions(+), 30 deletions(-)
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH v7 1/3 platform/x86: int3472: Use correct type for "polarity", call it gpio_flags

Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned long for values to be assigned to that field. Similarly, also call the field gpio_flags which it really is.

---
 drivers/platform/x86/intel/int3472/discrete.c | 39 ++++++++++---------
 1 file changed, 20 insertions(+), 19 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +20 -19
index 31015ebe20d8..b891b064fbf7 100644
@@ -55,7 +55,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, u32 polarity)
+					 const char *func, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -70,14 +70,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, polarity);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, u32 polarity)
+					  const char *func, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -87,7 +87,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, polarity);
+					    agpio, func, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -100,7 +100,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, u32 polarity)
+				       const char *func, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -111,7 +111,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, polarity);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -122,32 +122,33 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
+static void int3472_get_func_and_polarity(u8 type, const char **func,
+					  unsigned long *gpio_flags)
 {
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
 		*func = "powerdown";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 		*func = "clk-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		*func = "privacy-led";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
 		*func = "power-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
 		*func = "unknown";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
 }
@@ -194,7 +195,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	struct gpio_desc *gpio;
 	const char *err_msg;
 	const char *func;
-	u32 polarity;
+	unsigned long gpio_flags;
 	int ret;
 
 	if (!acpi_gpio_get_io_resource(ares, &agpio))
@@ -217,7 +218,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &polarity);
+	int3472_get_func_and_polarity(type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
@@ -227,16 +228,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
-		polarity ^= GPIO_ACTIVE_LOW;
+		gpio_flags ^= GPIO_ACTIVE_LOW;
 
 	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
-		str_high_low(polarity == GPIO_ACTIVE_HIGH));
+		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -244,7 +245,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, polarity);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH v7 2/3 platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

In reply to Sakari Ailus

The DT bindings for ov7251 specify "enable" GPIO (xshutdown in documentation) but the int3472 indiscriminately provides this as a "reset" GPIO to sensor drivers. Take this into account by assigning it as "enable" with active high polarity for INT347E devices, i.e. ov7251. "reset" with active low polarity remains the default GPIO name for other devices.

---
 drivers/platform/x86/intel/int3472/discrete.c | 52 +++++++++++++++++--
 1 file changed, 48 insertions(+), 4 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +48 -4
index b891b064fbf7..092252eb95a8 100644
@@ -2,6 +2,7 @@
 /* Author: Dan Scally <[email protected]> */
 
 #include <linux/acpi.h>
+#include <linux/array_size.h>
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -122,10 +123,53 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func,
-					  unsigned long *gpio_flags)
+/**
+ * struct int3472_gpio_map - Map GPIOs to whatever is expected by the
+ * sensor driver (as in DT bindings)
+ * @hid: The ACPI HID of the device without the instance number e.g. INT347E
+ * @type_from: The GPIO type from ACPI ?SDT
+ * @type_to: The assigned GPIO type, typically same as @type_from
+ * @func: The function, e.g. "enable"
+ * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
+ * GPIO_ACTIVE_HIGH otherwise
+ */
+struct int3472_gpio_map {
+	const char *hid;
+	u8 type_from;
+	u8 type_to;
+	bool polarity_low;
+	const char *func;
+};
+
+static const struct int3472_gpio_map int3472_gpio_map[] = {
+	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
+};
+
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
+		/*
+		 * Map the firmware-provided GPIO to whatever a driver expects
+		 * (as in DT bindings). First check if the type matches with the
+		 * GPIO map, then further check that the device _HID matches.
+		 */
+		if (*type != int3472_gpio_map[i].type_from)
+			continue;
+
+		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;
+
+		*type = int3472_gpio_map[i].type_to;
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
+
+	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
 		*gpio_flags = GPIO_ACTIVE_LOW;
@@ -218,7 +262,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &gpio_flags);
+	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
Signature · 1 line
2.39.5
author maintainer
#3 lore raw

PATCH v7 3/3 platform/x86: int3472: Call "func" "con_id" instead

In reply to Sakari Ailus

"con_id" is an established variable name for the GPIO naming for drivers. Use it instead of "func" in the int3472 driver, too.

---
 drivers/platform/x86/intel/int3472/discrete.c | 48 +++++++++----------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +24 -24
index 092252eb95a8..30ff8f3ea1f5 100644
@@ -56,7 +56,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, unsigned long gpio_flags)
+					 const char *con_id, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -71,14 +71,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], con_id, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, unsigned long gpio_flags)
+					  const char *con_id, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -88,7 +88,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, gpio_flags);
+					    agpio, con_id, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -101,7 +101,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, unsigned long gpio_flags)
+				       const char *con_id, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -112,12 +112,12 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, con_id, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
 	gpiod_add_lookup_table(lookup);
-	desc = devm_gpiod_get(int3472->dev, func, GPIOD_OUT_LOW);
+	desc = devm_gpiod_get(int3472->dev, con_id, GPIOD_OUT_LOW);
 	gpiod_remove_lookup_table(lookup);
 
 	return desc;
@@ -129,7 +129,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
  * @hid: The ACPI HID of the device without the instance number e.g. INT347E
  * @type_from: The GPIO type from ACPI ?SDT
  * @type_to: The assigned GPIO type, typically same as @type_from
- * @func: The function, e.g. "enable"
+ * @con_id: The name of the GPIO for the device
  * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
  * GPIO_ACTIVE_HIGH otherwise
  */
@@ -138,15 +138,15 @@ struct int3472_gpio_map {
 	u8 type_from;
 	u8 type_to;
 	bool polarity_low;
-	const char *func;
+	const char *con_id;
 };
 
 static const struct int3472_gpio_map int3472_gpio_map[] = {
 	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
 };
 
-static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
-					  const char **func, unsigned long *gpio_flags)
+static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
+					    const char **con_id, unsigned long *gpio_flags)
 {
 	unsigned int i;
 
@@ -165,33 +165,33 @@ static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
 		*type = int3472_gpio_map[i].type_to;
 		*gpio_flags = int3472_gpio_map[i].polarity_low ?
 			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
-		*func = int3472_gpio_map[i].func;
+		*con_id = int3472_gpio_map[i].con_id;
 		return;
 	}
 
 	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
-		*func = "reset";
+		*con_id = "reset";
 		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		*func = "powerdown";
+		*con_id = "powerdown";
 		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
-		*func = "clk-enable";
+		*con_id = "clk-enable";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
-		*func = "privacy-led";
+		*con_id = "privacy-led";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		*func = "power-enable";
+		*con_id = "power-enable";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
-		*func = "unknown";
+		*con_id = "unknown";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
@@ -238,7 +238,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	union acpi_object *obj;
 	struct gpio_desc *gpio;
 	const char *err_msg;
-	const char *func;
+	const char *con_id;
 	unsigned long gpio_flags;
 	int ret;
 
@@ -262,26 +262,26 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
+	int3472_get_con_id_and_polarity(int3472->sensor, &type, &con_id, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
 	if (pin != (agpio->pin_table[0] & 0xff))
 		dev_dbg(int3472->dev, FW_BUG "%s %s pin number mismatch _DSM %d resource %d\n",
-			func, agpio->resource_source.string_ptr, pin, agpio->pin_table[0]);
+			con_id, agpio->resource_source.string_ptr, pin, agpio->pin_table[0]);
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
 		gpio_flags ^= GPIO_ACTIVE_LOW;
 
-	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
+	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", con_id,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
 		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -289,7 +289,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, con_id, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";
Signature · 1 line
2.39.5
#4 lore raw
In reply to Sakari Ailus
Quoted 5 lines · Sakari Ailus

One patch turned into a set, the second patch being the original one.

since v6:

- Reword the comment regarding GPIO map processing.

Hans, Ilpo, I think this is in good enough shape (the order of the checks I'm still not happy about
we can amend later on if required). Can it be taken?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw

Hi,

Quoted 10 lines · Andy Shevchenko
Quoted 5 lines · Sakari Ailus

One patch turned into a set, the second patch being the original one.

since v6:

- Reword the comment regarding GPIO map processing.

Hans, Ilpo, I think this is in good enough shape (the order of the checks I'm still not happy about
we can amend later on if required). Can it be taken?

Yes this looks good to me. Ilpo can you merge these 3 as fixes for the 6.14 cycle ?

Regards,

Hans

maintainer
#6 lore raw
Quoted 8 lines · Hans de Goede

Hi,

Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sakari Ailus

One patch turned into a set, the second patch being the original one.

since v6:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

- Reword the comment regarding GPIO map processing.

Hans, Ilpo, I think this is in good enough shape (the order of the checks I'm still not happy about
we can amend later on if required). Can it be taken?

Yes this looks good to me. Ilpo can you merge these 3 as fixes for the 6.14 cycle ?

Currently, these don't appear in lore for some reason (not in patchwork)...

Sakari, could you please resend the series v7 so that it hopefully gets picked up by lore and is easier for me to apply them using the normal tools I've.

The last patch IMO falls outside of even borderline for fixes. I think I'll put it into for-next after merging the two first ones from fixes branch into for-next.

Signature · 1 line
 i.
#7 lore raw
Quoted 1 line · Ilpo Järvinen

On Tue, 11 Feb 2025, Hans de Goede wrote:

...

Quoted 2 lines

Currently, these don't appear in lore for some reason (not in patchwork)...

FWIW, lore seems down. DDoS on kernel.org? (I dunno)

Quoted 3 lines

Sakari, could you please resend the series v7 so that it hopefully gets picked up by lore and is easier for me to apply them using the normal tools I've.

Usually lore picks them up when it restores. But it's up to you, of course, how to proceed. Just my 2c.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#8 lore raw
In reply to Ilpo Järvinen

Hi Ilpo,

Quoted 19 lines · Ilpo Järvinen
Quoted 8 lines · Hans de Goede

Hi,

Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sakari Ailus

One patch turned into a set, the second patch being the original one.

since v6:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

- Reword the comment regarding GPIO map processing.

Hans, Ilpo, I think this is in good enough shape (the order of the checks I'm still not happy about
we can amend later on if required). Can it be taken?

Yes this looks good to me. Ilpo can you merge these 3 as fixes for the 6.14 cycle ?

Quoted 6 lines

Currently, these don't appear in lore for some reason (not in patchwork)...

Sakari, could you please resend the series v7 so that it hopefully gets picked up by lore and is easier for me to apply them using the normal tools I've.

Lore is up again, getting the patches from there should therefore work (I tried it).

Quoted 4 lines

The last patch IMO falls outside of even borderline for fixes. I think I'll put it into for-next after merging the two first ones from fixes branch into for-next.

Sounds reasonable.

Signature · 3 lines
Regards,

Sakari Ailus
maintainer
#9 lore raw
Quoted 28 lines · Sakari Ailus
Quoted 16 lines · Ilpo Järvinen
Quoted 6 lines · Hans de Goede
Quoted 5 lines · Andy Shevchenko
Quoted 4 lines · Sakari Ailus

One patch turned into a set, the second patch being the original one.

since v6:

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

- Reword the comment regarding GPIO map processing.

Hans, Ilpo, I think this is in good enough shape (the order of the checks I'm still not happy about
we can amend later on if required). Can it be taken?

Yes this looks good to me. Ilpo can you merge these 3 as fixes for the 6.14 cycle ?

Quoted 6 lines

Currently, these don't appear in lore for some reason (not in patchwork)...

Sakari, could you please resend the series v7 so that it hopefully gets picked up by lore and is easier for me to apply them using the normal tools I've.

Lore is up again, getting the patches from there should therefore work (I tried it).

Quoted 1 line
Quoted 5 lines
Quoted 3 lines

The last patch IMO falls outside of even borderline for fixes. I think I'll put it into for-next after merging the two first ones from fixes branch into for-next.

Sounds reasonable.

Patches 1 & 2 are now in the review-ilpo-fixes branch.

Signature · 1 line
 i.
author maintainer
#10 lore raw
Quoted 1 line · Ilpo Järvinen

Patches 1 & 2 are now in the review-ilpo-fixes branch.

Thank you!

Signature · 1 line
Sakari Ailus