Skip to contentSkip to conversation

arm64: Introduce CIX P1 (SKY1) SoC

PATCH Superseded Peter Chen 5 participants 20 messages Mar 5, 2025 – Mar 21, 2025

Subsystems (4)

v4 of 11 Superseded Latest is v11 →

lore
Share & tools
lore

Peter Chen

author
#0 lore raw

v4 cover arm64: Introduce CIX P1 (SKY1) SoC

Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC. Orion O6 is the world's first open source Arm V9 Motherboard built by Radxa. You could find brief introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview

In this series, we add initial SoC and board support for Kernel building. Patch 1-2: Add dt-binding doc for CIX and its sky1 SoC
Patch 3: add related maintainers entry
Patch 4-5: add Arm64 build support
Patch 6: add initial dts support for SoC and Orion O6 board

To run upstream kernel at Orion O6 board, you need to use BIOS released by Radxa:
https://docs.radxa.com/en/orion/o6/bios/install-bios

Changes for v4:
- Move add MAINTAINERS entry patch to the last, and add two dts files entry in it.
- Add three Krzysztof Kozlowski's Reviewed-by Tags
- For sky1.dtsi, makes below changes:
- Add ppi-partition entry for gic-v3 node, and let pmu-a520 and pmu-a720's interrupt entry get its handle
- Remove gic-v3's #redistributor-regions and redistributor-stride properties
- Change gic-v3's #interrupt-cells as 4, and change all interrupt specifiers accordingly
- Remove "arm,no-tick-in-suspend" for timer due to global counter is at always-on power domain
- Remove timer's clock frequency due to firmware has already set it

Changes for v3:
- Patch 1: Add Krzysztof Kozlowski's Acked-by Tag
- Patch 2: Add Krzysztof Kozlowski's Reviewed-by Tag
- Patch 6: Fix two dts coding sytle issues

Changes for v2:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=vendor-prefixes.yaml make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Re-order the patch set, and move vendor-perfixes to the 1st patch.
- Patch 4: Ordered Kconfig config entry by alpha-numerically
- Patch 5: Corrects the Ack tag's name
- Patch 6: see below.
1) Corrects the SoF tag's name
2) Fix several coding sytle issues
3) move linux,cma node to dts file
4) delete memory node, memory size is passed by firmware
5) delete uart2 node which will be added in future patches
6) Improve for pmu and cpu node to stands for more specific cpu model
7) Improve the timer node and add hypervisor virtual timer irq

Fugang Duan (1):
arm64: Kconfig: add ARCH_CIX for cix silicons

Peter Chen (5):
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
dt-bindings: arm: add CIX P1 (SKY1) SoC
arm64: defconfig: Enable CIX SoC
arm64: dts: cix: add initial CIX P1(SKY1) dts support
MAINTAINERS: Add CIX SoC maintainer entry

 .../devicetree/bindings/arm/cix.yaml          |  26 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |  10 +
 arch/arm64/Kconfig.platforms                  |   6 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/cix/Makefile              |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts     |  26 ++
 arch/arm64/boot/dts/cix/sky1.dtsi             | 222 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 9 files changed, 296 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
Signature · 1 line
2.25.1
author
#1 lore raw

PATCH v4 1/6 dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.

CIX Technology Group Co., Ltd. is a high performance Arm SoC design company. Link: https://www.cixtech.com/.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 5079ca6ce1d1..5e76223e4570 100644
@@ -302,6 +302,8 @@ patternProperties:
     description: Cirrus Logic, Inc.
   "^cisco,.*":
     description: Cisco Systems, Inc.
+  "^cix,.*":
+    description: CIX Technology Group Co., Ltd.
   "^clockwork,.*":
     description: Clockwork Tech LLC
   "^cloos,.*":
Signature · 1 line
2.25.1
author
#2 lore raw

PATCH v4 2/6 dt-bindings: arm: add CIX P1 (SKY1) SoC

In reply to Peter Chen

Add device tree bindings for CIX P1 (Internal name sky1) Arm SoC, it consists several SoC models like CP8180, CD8180, etc.

---
 .../devicetree/bindings/arm/cix.yaml          | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
Documentation/devicetree/bindings/arm/cix.yaml new file +26 -0
new file mode 100644
index 000000000000..114dab4bc4d2
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIX platforms
+
+maintainers:
+  - Peter Chen <[email protected]>
+  - Fugang Duan <[email protected]>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Radxa Orion O6
+        items:
+          - const: radxa,orion-o6
+          - const: cix,sky1
+
+additionalProperties: true
+
+...
Signature · 1 line
2.25.1
author
#3 lore raw

PATCH v4 3/6 arm64: Kconfig: add ARCH_CIX for cix silicons

In reply to Peter Chen

From: Fugang Duan <[email protected]>

Add ARCH_CIX for CIX SoC series support.

---
Changes for v4:
- Add Krzysztof Kozlowski's Reviewed-by Tag

 arch/arm64/Kconfig.platforms | 6 ++++++
 1 file changed, 6 insertions(+)
arch/arm64/Kconfig.platforms +6 -0
index 02f9248f7c84..abe41db9b9b3 100644
@@ -106,6 +106,12 @@ config ARCH_BLAIZE
 	help
 	  This enables support for the Blaize SoC family
 
+config ARCH_CIX
+	bool "Cixtech SoC family"
+	help
+	  This enables support for the Cixtech SoC family,
+	  like P1(sky1).
+
 config ARCH_EXYNOS
 	bool "Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
Signature · 1 line
2.25.1
author
#4 lore raw

PATCH v4 4/6 arm64: defconfig: Enable CIX SoC

In reply to Peter Chen

Enable CIX SoC support at ARM64 defconfig

---
Changes for v4:
- Add Krzysztof Kozlowski's Reviewed-by Tag

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index cb7da4415599..1dd46d200401 100644
@@ -45,6 +45,7 @@ CONFIG_ARCH_BCMBCA=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_ARCH_BLAIZE=y
+CONFIG_ARCH_CIX=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_K3=y
Signature · 1 line
2.25.1
author
#5 lore raw

PATCH v4 5/6 arm64: dts: cix: add initial CIX P1(SKY1) dts support

In reply to Peter Chen

CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech, and Orion O6 is open source motherboard launched by Radxa. See below for detail:
https://docs.radxa.com/en/orion/o6/getting-started/introduction

In this commit, it only adds limited components for running initramfs at Orion O6.

---
Changes for v4:
- Add ppi-partition entry for gic-v3 node, and let pmu-a520 and pmu-a720's interrupt entry get its handle
- Remove gic-v3's #redistributor-regions and redistributor-stride properties
- Change gic-v3's #interrupt-cells as 4, and change all interrupt specifiers accordingly
- Remove "arm,no-tick-in-suspend" for timer due to global counter is at always-on power domain
- Remove timer's clock frequency due to firmware has already set it
- Add Krzysztof Kozlowski's reviewed-by
Changes for v3:
- Fix two dts coding sytle issues
Changes for v2:
- Corrects the SoF tag's name
- Fix several coding sytle issues
- move linux,cma node to dts file
- delete memory node, memory size is passed by firmware
- delete uart2 node which will be added in future patches
- Improve for pmu and cpu node to stands for more specific cpu model
- Improve the timer node and add hypervisor virtual timer irq
- Pass "make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb"

 arch/arm64/boot/dts/Makefile              |   1 +
 arch/arm64/boot/dts/cix/Makefile          |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts |  26 +++
 arch/arm64/boot/dts/cix/sky1.dtsi         | 222 ++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
arch/arm64/boot/dts/Makefile +1 -0
index 79b73a21ddc2..8e7ccd0027bd 100644
@@ -13,6 +13,7 @@ subdir-y += bitmain
 subdir-y += blaize
 subdir-y += broadcom
 subdir-y += cavium
+subdir-y += cix
 subdir-y += exynos
 subdir-y += freescale
 subdir-y += hisilicon
arch/arm64/boot/dts/cix/Makefile new file +2 -0
new file mode 100644
index 000000000000..ed3713982012
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
arch/arm64/boot/dts/cix/sky1-orion-o6.dts new file +26 -0
new file mode 100644
index 000000000000..78f4fcd87216
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+/ {
+	model = "Radxa Orion O6";
+	compatible = "radxa,orion-o6", "cix,sky1";
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x28000000>;
+			linux,cma-default;
+		};
+	};
+};
arch/arm64/boot/dts/cix/sky1.dtsi new file +222 -0

222 lines not on this page · raw message

Signature · 1 line
2.25.1
#6 lore raw

Re: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 5 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +4 -0
+	pmu-a520 {
+		compatible = "arm,cortex-a520-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+	};

arch/arm64/boot/dts/cix/sky1.dtsi line 169

Quoted 10 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +10 -0
+
+	pmu-a720 {
+		compatible = "arm,cortex-a720-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+	};
+
+	pmu-spe {
+		compatible = "arm,statistical-profiling-extension-v1";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+	};

SPE should follow the same model as the PMU, as each CPU has its own SPE implementation, exposing different micro-architectural details.

The rest looks OK.

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
author
#7 lore raw

Re: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 11 lines · Marc Zyngier
Quoted 10 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +9 -0
+     pmu-a520 {
+             compatible = "arm,cortex-a520-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+     };
+
+     pmu-a720 {
+             compatible = "arm,cortex-a720-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+     };
Quoted 9 lines

arch/arm64/boot/dts/cix/sky1.dtsi line 169

Quoted 5 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +5 -0
+
+     pmu-spe {
+             compatible = "arm,statistical-profiling-extension-v1";
+             interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+     };

SPE should follow the same model as the PMU, as each CPU has its own SPE implementation, exposing different micro-architectural details.

Hi Marc,

Thanks for your reply. But there is only one compatible string "statistical-profiling-extension-v1" at drivers/perf/arm_spe_pmu.c, how could differentiate pmu-spe-a720 and pmu-spe-a520, do I need to change arm_spe_pmu.c as well?

Signature · 2 lines
Best regards,
Peter
#8 lore raw

Re: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 23 lines · Peter Chen
Quoted 11 lines · Marc Zyngier
Quoted 10 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +9 -0
+     pmu-a520 {
+             compatible = "arm,cortex-a520-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+     };
+
+     pmu-a720 {
+             compatible = "arm,cortex-a720-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+     };
Quoted 9 lines

arch/arm64/boot/dts/cix/sky1.dtsi line 169

Quoted 5 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +5 -0
+
+     pmu-spe {
+             compatible = "arm,statistical-profiling-extension-v1";
+             interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+     };

SPE should follow the same model as the PMU, as each CPU has its own SPE implementation, exposing different micro-architectural details.

Quoted 6 lines

Hi Marc,

Thanks for your reply. But there is only one compatible string "statistical-profiling-extension-v1" at drivers/perf/arm_spe_pmu.c, how could differentiate pmu-spe-a720 and pmu-spe-a520, do I need to change arm_spe_pmu.c as well?

I don't think there is a need to have different compatible. The driver can probe which CPU this is on, and work out the implemented subfeatures from the PMSIDR_EL1 register. New compatible strings are better avoided when there is a way to probe/discover the HW (and in most cases, there is).

Note that this equally applies to TRBE, which also explicitly deals with interrupt partitioning and yet only has a single compatible. Please consider adding TRBE support when you repost this series.

Thanks,

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
author
#9 lore raw

Re: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 35 lines · Marc Zyngier
Quoted 22 lines · Marc Zyngier
Quoted 11 lines
Quoted 10 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +9 -0
+     pmu-a520 {
+             compatible = "arm,cortex-a520-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+     };
+
+     pmu-a720 {
+             compatible = "arm,cortex-a720-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+     };
Quoted 9 lines

arch/arm64/boot/dts/cix/sky1.dtsi line 169

Quoted 5 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +5 -0
+
+     pmu-spe {
+             compatible = "arm,statistical-profiling-extension-v1";
+             interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+     };

SPE should follow the same model as the PMU, as each CPU has its own SPE implementation, exposing different micro-architectural details.

Quoted 6 lines

Hi Marc,

Thanks for your reply. But there is only one compatible string "statistical-profiling-extension-v1" at drivers/perf/arm_spe_pmu.c, how could differentiate pmu-spe-a720 and pmu-spe-a520, do I need to change arm_spe_pmu.c as well?

I don't think there is a need to have different compatible. The driver can probe which CPU this is on, and work out the implemented subfeatures from the PMSIDR_EL1 register. New compatible strings are better avoided when there is a way to probe/discover the HW (and in most cases, there is).

Quoted 4 lines

Note that this equally applies to TRBE, which also explicitly deals with interrupt partitioning and yet only has a single compatible. Please consider adding TRBE support when you repost this series.

Hi Marc,

Thanks for your comment, we need to discuss it internally. Since it is very initial dts support for CIX sky1 SoC, I will delete pmu-spe support at this time, and add better support for it when adding more components next time.

Signature · 2 lines
Best regards,
Peter
#10 lore raw

Re: [PATCH v4 5/6] arm64: dts: cix: add initial CIX P1(SKY1) dts support

Quoted 42 lines · Peter Chen
Quoted 35 lines · Marc Zyngier
Quoted 22 lines · Marc Zyngier
Quoted 11 lines
Quoted 10 lines · Peter Chen
arch/arm64/boot/dts/cix/sky1.dtsi new file +9 -0
+     pmu-a520 {
+             compatible = "arm,cortex-a520-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition0>;
+     };
+
+     pmu-a720 {
+             compatible = "arm,cortex-a720-pmu";
+             interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_partition1>;
+     };
Quoted 9 lines

arch/arm64/boot/dts/cix/sky1.dtsi line 169

Quoted 5 lines
arch/arm64/boot/dts/cix/sky1.dtsi new file +5 -0
+
+     pmu-spe {
+             compatible = "arm,statistical-profiling-extension-v1";
+             interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_LOW 0>;
+     };

SPE should follow the same model as the PMU, as each CPU has its own SPE implementation, exposing different micro-architectural details.

Quoted 6 lines

Hi Marc,

Thanks for your reply. But there is only one compatible string "statistical-profiling-extension-v1" at drivers/perf/arm_spe_pmu.c, how could differentiate pmu-spe-a720 and pmu-spe-a520, do I need to change arm_spe_pmu.c as well?

I don't think there is a need to have different compatible. The driver can probe which CPU this is on, and work out the implemented subfeatures from the PMSIDR_EL1 register. New compatible strings are better avoided when there is a way to probe/discover the HW (and in most cases, there is).

Quoted 4 lines

Note that this equally applies to TRBE, which also explicitly deals with interrupt partitioning and yet only has a single compatible. Please consider adding TRBE support when you repost this series.

Quoted 6 lines

Hi Marc,

Thanks for your comment, we need to discuss it internally. Since it is very initial dts support for CIX sky1 SoC, I will delete pmu-spe support at this time, and add better support for it when adding more components next time.

And therefore making this machine even less useful than it already is?

<s> I think this is a great plan. </s>

	M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
author
#11 lore raw

PATCH v4 6/6 MAINTAINERS: Add CIX SoC maintainer entry

In reply to Peter Chen

Using this entry as the maintainers information for CIX SKY series SoCs.

---
Changes for v4
- Add two dts files as maintained files

 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)
MAINTAINERS +10 -0
index efee40ea589f..edf26cf11ee2 100644
@@ -2354,6 +2354,16 @@ F:	arch/arm/boot/compressed/misc-ep93xx.h
 F:	arch/arm/mach-ep93xx/
 F:	drivers/iio/adc/ep93xx_adc.c
 
+ARM/CIX SKY ARM ARCHITECTURE
+M:	Peter Chen <[email protected]>
+M:	Fugang Duan <[email protected]>
+R:	CIX Linux Kernel Upstream Group <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/cix.yaml
+F:	arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:	arch/arm64/boot/dts/cix/sky1.dtsi
+
 ARM/CLKDEV SUPPORT
 M:	Russell King <[email protected]>
 L:	[email protected] (moderated for non-subscribers)
Signature · 1 line
2.25.1
#12 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

Quoted 18 lines · Peter Chen

Using this entry as the maintainers information for CIX SKY series SoCs.

---
Changes for v4
- Add two dts files as maintained files

 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)
MAINTAINERS +0 -0
index efee40ea589f..edf26cf11ee2 100644
@@ -2354,6 +2354,16 @@ F:	arch/arm/boot/compressed/misc-ep93xx.h
 F:	arch/arm/mach-ep93xx/
 F:	drivers/iio/adc/ep93xx_adc.c

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2365

Quoted 10 lines
MAINTAINERS +9 -0
 
+ARM/CIX SKY ARM ARCHITECTURE
+M:	Peter Chen <[email protected]>
+M:	Fugang Duan <[email protected]>
+R:	CIX Linux Kernel Upstream Group <[email protected]>
+L:	[email protected] (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/arm/cix.yaml
+F:	arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:	arch/arm64/boot/dts/cix/sky1.dtsi

Instead:
arch/arm64/boot/dts/cix/

or if you think there will be more different architectures coming from cix, which you will not maintain, then useful would be a "sky" subdirectory.

Best regards,
Krzysztof

author
#13 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

Quoted 35 lines · Krzysztof Kozlowski

EXTERNAL EMAIL

Quoted 18 lines · Peter Chen

Using this entry as the maintainers information for CIX SKY series SoCs.

---
Changes for v4
- Add two dts files as maintained files

 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)
MAINTAINERS +0 -0
index efee40ea589f..edf26cf11ee2 100644
@@ -2354,6 +2354,16 @@ F:     arch/arm/boot/compressed/misc-ep93xx.h
 F:   arch/arm/mach-ep93xx/
 F:   drivers/iio/adc/ep93xx_adc.c

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2365

Quoted 10 lines
MAINTAINERS +9 -0
 
+ARM/CIX SKY ARM ARCHITECTURE
+M:   Peter Chen <[email protected]>
+M:   Fugang Duan <[email protected]>
+R:   CIX Linux Kernel Upstream Group <[email protected]>
+L:   [email protected] (moderated for non-subscribers)
+S:   Maintained
+F:   Documentation/devicetree/bindings/arm/cix.yaml
+F:   arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:   arch/arm64/boot/dts/cix/sky1.dtsi

Instead:
arch/arm64/boot/dts/cix/

Quoted 3 lines

or if you think there will be more different architectures coming from cix, which you will not maintain, then useful would be a "sky" subdirectory.

Hi Krzysztof,

Thanks for your comment, CIX is Arm SoC based silicon design company, we may have different SoC style for middle end in future. So, for that SoC series, it may not name sky.

Signature · 2 lines
Best regards,
Peter
#14 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

On Thu, Mar 20, 2025 at 06:49:47PM +0800, Peter Chen wrote:

(...)

Quoted 13 lines
Quoted 13 lines

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2365

Quoted 9 lines
MAINTAINERS +9 -0
+ARM/CIX SKY ARM ARCHITECTURE
+M:   Peter Chen <[email protected]>
+M:   Fugang Duan <[email protected]>
+R:   CIX Linux Kernel Upstream Group <[email protected]>
+L:   [email protected] (moderated for non-subscribers)
+S:   Maintained
+F:   Documentation/devicetree/bindings/arm/cix.yaml
+F:   arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:   arch/arm64/boot/dts/cix/sky1.dtsi

Instead:
arch/arm64/boot/dts/cix/

Quoted 8 lines
Quoted 3 lines

or if you think there will be more different architectures coming from cix, which you will not maintain, then useful would be a "sky" subdirectory.

Hi Krzysztof,

Thanks for your comment, CIX is Arm SoC based silicon design company, we may have different SoC style for middle end in future. So, for that SoC series, it may not name sky.

I believe the idea is that the file should either say

+F: arch/arm64/boot/dts/cix/

if the two of you intend to be maintainers for everything under cix/. You don't need to list every specific file.

Otherwise it should say

+F: arch/arm64/boot/dts/cix/sky/

with its own subdirectory if you only intend to be maintaining the sky family.

Quoted 4 lines

--

Best regards,
Peter

author
#15 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

Quoted 27 lines · Kajetan Puchalski
Quoted 14 lines
Quoted 14 lines

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2365

Quoted 10 lines
MAINTAINERS +9 -0
+ARM/CIX SKY ARM ARCHITECTURE
+M:   Peter Chen <[email protected]>
+M:   Fugang Duan <[email protected]>
+R:   CIX Linux Kernel Upstream Group <[email protected]>
+L:   [email protected] (moderated for non-subscribers)
+S:   Maintained
+F:   Documentation/devicetree/bindings/arm/cix.yaml
+F:   arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:   arch/arm64/boot/dts/cix/sky1.dtsi

Instead:
arch/arm64/boot/dts/cix/

Quoted 8 lines
Quoted 3 lines

or if you think there will be more different architectures coming from cix, which you will not maintain, then useful would be a "sky" subdirectory.

Hi Krzysztof,

Thanks for your comment, CIX is Arm SoC based silicon design company, we may have different SoC style for middle end in future. So, for that SoC series, it may not name sky.

I believe the idea is that the file should either say

+F: arch/arm64/boot/dts/cix/

Quoted 8 lines

if the two of you intend to be maintainers for everything under cix/. You don't need to list every specific file.

Otherwise it should say

+F: arch/arm64/boot/dts/cix/sky/

with its own subdirectory if you only intend to be maintaining the sky family.

Hi Kajetan & Krzysztof,

Thanks for your valuable comments. We prefer maintain the entire CIX architecture under one entry, I will change maintain information like below:

ARM/CIX SOC SUPPORT
M: Peter Chen <[email protected]>
M: Fugang Duan <[email protected]>
R: CIX Linux Kernel Upstream Group <[email protected]>
L: [email protected] (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/cix.yaml
F: arch/arm64/boot/dts/cix/

Signature · 2 lines
Best regards,
Peter
#16 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

In reply to Peter Chen
Quoted 36 lines · Peter Chen
Quoted 35 lines · Krzysztof Kozlowski

EXTERNAL EMAIL

Quoted 18 lines · Peter Chen

Using this entry as the maintainers information for CIX SKY series SoCs.

---
Changes for v4
- Add two dts files as maintained files

 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)
MAINTAINERS +0 -0
index efee40ea589f..edf26cf11ee2 100644
@@ -2354,6 +2354,16 @@ F:     arch/arm/boot/compressed/misc-ep93xx.h
 F:   arch/arm/mach-ep93xx/
 F:   drivers/iio/adc/ep93xx_adc.c

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2365

Quoted 10 lines
MAINTAINERS +9 -0
 
+ARM/CIX SKY ARM ARCHITECTURE
+M:   Peter Chen <[email protected]>
+M:   Fugang Duan <[email protected]>
+R:   CIX Linux Kernel Upstream Group <[email protected]>
+L:   [email protected] (moderated for non-subscribers)
+S:   Maintained
+F:   Documentation/devicetree/bindings/arm/cix.yaml
+F:   arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:   arch/arm64/boot/dts/cix/sky1.dtsi

Instead:
arch/arm64/boot/dts/cix/

Quoted 8 lines
Quoted 3 lines

or if you think there will be more different architectures coming from cix, which you will not maintain, then useful would be a "sky" subdirectory.

Hi Krzysztof,

Thanks for your comment, CIX is Arm SoC based silicon design company, we may have different SoC style for middle end in future. So, for that SoC series, it may not name sky.

Your Kconfig says ARCH_CIX :/

Anyway, listing individual files is pointless, so if you are not going to maintain entire arch, then create subdir. Otherwise why creating so many entries? The biggest upstreamed SoC vendor (by number of SoCs and boards has one entry.

Best regards,
Krzysztof

maintainer
#17 lore raw

Re: [PATCH v4 6/6] MAINTAINERS: Add CIX SoC maintainer entry

In reply to Peter Chen

MAINTAINERS F: arch/arm/boot/compressed/misc-ep93xx.h · line 2366

Quoted 10 lines · Peter Chen
MAINTAINERS +10 -0
+ARM/CIX SKY ARM ARCHITECTURE
+M:     Peter Chen <[email protected]>
+M:     Fugang Duan <[email protected]>
+R:     CIX Linux Kernel Upstream Group <[email protected]>
+L:     [email protected] (moderated for non-subscribers)
+S:     Maintained
+F:     Documentation/devicetree/bindings/arm/cix.yaml
+F:     arch/arm64/boot/dts/cix/sky1-orion-o6.dts
+F:     arch/arm64/boot/dts/cix/sky1.dtsi
+

Looks good to me. You can also add a regex keyword entry such as

K: \bcix\b

to match any filenames that have 'cix' as a whole word.

Arnd

author
#18 lore raw
In reply to Peter Chen
Quoted 15 lines · Peter Chen

Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC. Orion O6 is the world's first open source Arm V9 Motherboard built by Radxa. You could find brief introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview

In this series, we add initial SoC and board support for Kernel building. Patch 1-2: Add dt-binding doc for CIX and its sky1 SoC
Patch 3: add related maintainers entry
Patch 4-5: add Arm64 build support
Patch 6: add initial dts support for SoC and Orion O6 board

To run upstream kernel at Orion O6 board, you need to use BIOS released by Radxa:
https://docs.radxa.com/en/orion/o6/bios/install-bios

Quoted 10 lines

Changes for v4:
- Move add MAINTAINERS entry patch to the last, and add two dts files entry in it.
- Add three Krzysztof Kozlowski's Reviewed-by Tags
- For sky1.dtsi, makes below changes:
- Add ppi-partition entry for gic-v3 node, and let pmu-a520 and pmu-a720's interrupt entry get its handle
- Remove gic-v3's #redistributor-regions and redistributor-stride properties
- Change gic-v3's #interrupt-cells as 4, and change all interrupt specifiers accordingly
- Remove "arm,no-tick-in-suspend" for timer due to global counter is at always-on power domain
- Remove timer's clock frequency due to firmware has already set it

Hi Arnd,

I assume this series (all patches) will go your tree, right?

Peter

Quoted 51 lines

Changes for v3:
- Patch 1: Add Krzysztof Kozlowski's Acked-by Tag
- Patch 2: Add Krzysztof Kozlowski's Reviewed-by Tag
- Patch 6: Fix two dts coding sytle issues

Changes for v2:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=vendor-prefixes.yaml make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Re-order the patch set, and move vendor-perfixes to the 1st patch.
- Patch 4: Ordered Kconfig config entry by alpha-numerically
- Patch 5: Corrects the Ack tag's name
- Patch 6: see below.
1) Corrects the SoF tag's name
2) Fix several coding sytle issues
3) move linux,cma node to dts file
4) delete memory node, memory size is passed by firmware
5) delete uart2 node which will be added in future patches
6) Improve for pmu and cpu node to stands for more specific cpu model
7) Improve the timer node and add hypervisor virtual timer irq

Fugang Duan (1):
arm64: Kconfig: add ARCH_CIX for cix silicons

Peter Chen (5):
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
dt-bindings: arm: add CIX P1 (SKY1) SoC
arm64: defconfig: Enable CIX SoC
arm64: dts: cix: add initial CIX P1(SKY1) dts support
MAINTAINERS: Add CIX SoC maintainer entry

 .../devicetree/bindings/arm/cix.yaml          |  26 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |  10 +
 arch/arm64/Kconfig.platforms                  |   6 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/cix/Makefile              |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts     |  26 ++
 arch/arm64/boot/dts/cix/sky1.dtsi             | 222 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 9 files changed, 296 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
Signature · 1 line
2.25.1
Signature · 2 lines
Best regards,
Peter
author
#19 lore raw
Quoted 27 lines · Peter Chen
Quoted 15 lines · Peter Chen

Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC. Orion O6 is the world's first open source Arm V9 Motherboard built by Radxa. You could find brief introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview

In this series, we add initial SoC and board support for Kernel building. Patch 1-2: Add dt-binding doc for CIX and its sky1 SoC
Patch 3: add related maintainers entry
Patch 4-5: add Arm64 build support
Patch 6: add initial dts support for SoC and Orion O6 board

To run upstream kernel at Orion O6 board, you need to use BIOS released by Radxa:
https://docs.radxa.com/en/orion/o6/bios/install-bios

Quoted 10 lines

Changes for v4:
- Move add MAINTAINERS entry patch to the last, and add two dts files entry in it.
- Add three Krzysztof Kozlowski's Reviewed-by Tags
- For sky1.dtsi, makes below changes:
- Add ppi-partition entry for gic-v3 node, and let pmu-a520 and pmu-a720's interrupt entry get its handle
- Remove gic-v3's #redistributor-regions and redistributor-stride properties
- Change gic-v3's #interrupt-cells as 4, and change all interrupt specifiers accordingly
- Remove "arm,no-tick-in-suspend" for timer due to global counter is at always-on power domain
- Remove timer's clock frequency due to firmware has already set it

Quoted 4 lines

Hi Arnd,

I assume this series (all patches) will go your tree, right?

A gentle ping, thanks.

Peter

Quoted 58 lines

Peter

Quoted 51 lines

Changes for v3:
- Patch 1: Add Krzysztof Kozlowski's Acked-by Tag
- Patch 2: Add Krzysztof Kozlowski's Reviewed-by Tag
- Patch 6: Fix two dts coding sytle issues

Changes for v2:
- Pass dts build check with below commands:
make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=vendor-prefixes.yaml make O=$OUTKNL dt_binding_check DT_SCHEMA_FILES=arm/cix.yaml make O=$OUTKNL CHECK_DTBS=y W=1 cix/sky1-orion-o6.dtb
- Re-order the patch set, and move vendor-perfixes to the 1st patch.
- Patch 4: Ordered Kconfig config entry by alpha-numerically
- Patch 5: Corrects the Ack tag's name
- Patch 6: see below.
1) Corrects the SoF tag's name
2) Fix several coding sytle issues
3) move linux,cma node to dts file
4) delete memory node, memory size is passed by firmware
5) delete uart2 node which will be added in future patches
6) Improve for pmu and cpu node to stands for more specific cpu model
7) Improve the timer node and add hypervisor virtual timer irq

Fugang Duan (1):
arm64: Kconfig: add ARCH_CIX for cix silicons

Peter Chen (5):
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
dt-bindings: arm: add CIX P1 (SKY1) SoC
arm64: defconfig: Enable CIX SoC
arm64: dts: cix: add initial CIX P1(SKY1) dts support
MAINTAINERS: Add CIX SoC maintainer entry

 .../devicetree/bindings/arm/cix.yaml          |  26 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |  10 +
 arch/arm64/Kconfig.platforms                  |   6 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/cix/Makefile              |   2 +
 arch/arm64/boot/dts/cix/sky1-orion-o6.dts     |  26 ++
 arch/arm64/boot/dts/cix/sky1.dtsi             | 222 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 9 files changed, 296 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/cix.yaml
 create mode 100644 arch/arm64/boot/dts/cix/Makefile
 create mode 100644 arch/arm64/boot/dts/cix/sky1-orion-o6.dts
 create mode 100644 arch/arm64/boot/dts/cix/sky1.dtsi
Signature · 1 line
2.25.1
Signature · 2 lines
Best regards,
Peter
Signature · 2 lines
Best regards,
Peter