i2c: tegra: Return if SMBUS message length is zero
PATCH 1/1 i2c: tegra: Return if SMBUS message length is zero
For SMBUS block read, do not continue to read if the message length passed from the device is '0'.
Signed-off-by Akhil R <[email protected]>
--- drivers/i2c/busses/i2c-tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-tegra.c +1 -1
@@ -1393,7 +1393,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],/* If M_RECV_LEN use ContinueXfer to read the first byte */ if (msgs[i].flags &I2C_M_RECV_LEN ) { ret =tegra_i2c_xfer_msg (i2c_dev, &msgs[i],MSG_END_CONTINUE ); -if (ret) +if (ret || msgs[i].buf[0 ] ==0 )break ;/* Set the msg length from first byte */ msgs[i].len += msgs[i].buf[0 ];
Signature · 1 line
2.43.2
Quoted 2 lines · Akhil R
For SMBUS block read, do not continue to read if the message length passed from the device is '0'.
You probably should also check for I2C_SMBUS_BLOCK_MAX while here.
Quoted 4 lines
Quoted 2 lines
For SMBUS block read, do not continue to read if the message length passed from the device is '0'.
You probably should also check for
I2C_SMBUS_BLOCK_MAXwhile here.
Done. Posted a new version with this additional check.
Thanks,
Akhil