usb: host: max3421-hcd: Add missing spi_device_id table
Subsystems (5)
Sasha Levin
maintainerPATCH 1/3 usb: host: max3421-hcd: Add missing spi_device_id table
From: Alexander Stein <[email protected]>
[ Upstream commit 41d5e3806cf589f658f92c75195095df0b66f66a ]
"maxim,max3421" DT compatible is missing its SPI device ID entry, not allowing module autoloading and leading to the following message:
"SPI driver max3421-hcd has no spi_device_id for maxim,max3421"
Fix this by adding the spi_device_id table.
--- drivers/usb/host/max3421-hcd.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/usb/host/max3421-hcd.c +7 -0
@@ -1956,6 +1956,12 @@ max3421_remove(struct spi_device *spi)return 0 ; } +static const struct spi_device_id max3421_spi_ids[] = { + {"max3421" }, + { }, +}; +MODULE_DEVICE_TABLE (spi, max3421_spi_ids); +static const struct of_device_id max3421_of_match_table[] = { { .compatible ="maxim,max3421" , }, {},
@@ -1965,6 +1971,7 @@ MODULE_DEVICE_TABLE(of, max3421_of_match_table);static struct spi_driver max3421_driver = { .probe = max3421_probe, .remove = max3421_remove, + .id_table = max3421_spi_ids, .driver = { .name ="max3421-hcd" , .of_match_table =of_match_ptr (max3421_of_match_table),
Signature · 1 line
2.39.5
Sasha Levin
maintainerPATCH 2/3 dmaengine: dmatest: Fix dmatest waiting less when interrupted
From: Vinicius Costa Gomes <[email protected]>
[ Upstream commit e87ca16e99118ab4e130a41bdf12abbf6a87656c ]
Change the "wait for operation finish" logic to take interrupts into account.
When using dmatest with idxd DMA engine, it's possible that during longer tests, the interrupt notifying the finish of an operation happens during wait_event_freezable_timeout(), which causes dmatest to cleanup all the resources, some of which might still be in use.
This fix ensures that the wait logic correctly handles interrupts, preventing premature cleanup of resources.
--- drivers/dma/dmatest.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/dma/dmatest.c +3 -3
@@ -809,9 +809,9 @@ static int dmatest_func(void *data) }else {dma_async_issue_pending (chan); -wait_event_freezable_timeout (thread->done_wait, - done->done, -msecs_to_jiffies (params->timeout)); +wait_event_timeout (thread->done_wait, + done->done, +msecs_to_jiffies (params->timeout)); status =dma_async_is_tx_complete (chan, cookie,NULL ,NULL );
Signature · 1 line
2.39.5
Sasha Levin
maintainerPATCH 3/3 usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
In reply to Sasha LevinFrom: Chenyuan Yang <[email protected]>
[ Upstream commit 8c75f3e6a433d92084ad4e78b029ae680865420f ]
The variable d->name, returned by devm_kasprintf(), could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool
--- drivers/usb/gadget/udc/aspeed-vhub/dev.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/gadget/udc/aspeed-vhub/dev.c +3 -0
@@ -542,6 +542,9 @@ int ast_vhub_init_dev(struct ast_vhub *vhub, unsigned int idx) d->vhub = vhub; d->index = idx; d->name =devm_kasprintf (parent,GFP_KERNEL ,"port%d" , idx+1 ); +if (!d->name) +return -ENOMEM ; + d->regs = vhub->regs +0x100 +0x10 * idx;ast_vhub_init_ep0 (vhub, &d->ep0, d);
Signature · 1 line
2.39.5