dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Subsystems (2)
PATCH v2 1/3 dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
---
Notes:
Changes in v2:
- no changes
Documentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +2 -0
@@ -135,6 +135,8 @@ properties: - description: K3 J721s2 SoC items: - enum: + - phytec,am68-phyboard-izar + - phytec,am68-phycore-som - ti,am68-sk - ti,j721s2-evm - const: ti,j721s2
Signature · 1 line
2.43.0
PATCH v2 2/3 arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe
For more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/
---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124
Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes in v2:
- aliases reordered
- stdout-path set to &main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message
arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 578 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1173 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
arch/arm64/boot/dts/ti/Makefile +1 -0
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +578 -0
578 lines not on this page · raw message
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +594 -0
594 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v2 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
Quoted 21 lines · Dominik Haller
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe
Quoted 8 lines
For more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>---
Looks good to me, dtbs checks also seems to pass without any warnings.
Regards,
Moteen Shah
Quoted 1,217 lines
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Changes in v2:
- aliases reordered
- stdout-path set to&main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit messagearch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 578 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1173 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dtscreate mode 100644arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsiarch/arm64/boot/dts/ti/Makefile +1
-0@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtbarch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +578
-0@@ -0,0 +1,578 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + * https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/ + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include "k3-am68-phycore-som.dtsi" + +#include "k3-serdes.h" + +/ { + compatible = "phytec,am68-phyboard-izar", "ti,j721s2"; + model = "PHYTEC phyBOARD-Izar-AM68x"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart8; + serial3 = &main_uart1; + serial4 = &main_uart2; + mmc1 = &main_sdhci1; + ethernet0 = &cpsw_port1; + }; + + chosen { + stdout-path = &main_uart8; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + vcc_12v0: regulator-12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "VCC_IN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + /* Output of TLV7158P */ + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* Output of SiC431 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_5v0>; + }; + + vcc_5v0: regulator-vcc-5v0 { + /* Output of LM5116 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_12v0>; + }; +}; + +&main_pmx0 { + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (V27) MCASP1_AXR1.I2C2_SCL */ + J721S2_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (W27) MCASP1_AXR2.I2C2_SDA */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */ + J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */ + >; + }; + + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (Y24) MCAN15_TX.I2C5_SCL */ + J721S2_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (W23) MCAN14_RX.I2C5_SDA */ + >; + }; + + main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */ + >; + }; + + main_mcan1_pins_default: main-mcan1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c8, PIN_INPUT, 4) /* (AD28) EXT_REFCLK1.MCAN1_RX */ + J721S2_IOPAD(0x06c, PIN_OUTPUT, 0) /* (V26) MCAN1_TX */ + >; + }; + + main_mcan13_pins_default: main-mcan13-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_INPUT, 9) /* (AG25) TIMER_IO1.MCAN13_RX */ + J721S2_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AE28) MCAN13_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ + J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ + J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ + J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */ + J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */ + J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */ + J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */ + J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */ + >; + bootph-all; + }; + + main_spi6_pins_default: main-spi6-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x030, PIN_INPUT, 8) /* (T26) GPIO0_12.SPI6_CLK */ + J721S2_IOPAD(0x080, PIN_INPUT, 8) /* (U26) MCASP0_AXR4.SPI6_CS2 */ + J721S2_IOPAD(0x0c4, PIN_OUTPUT, 8) /* (AB26) ECAP0_IN_APWM_OUT.SPI6_D0 */ + J721S2_IOPAD(0x074, PIN_INPUT, 8) /* (R28) MCAN2_TX.SPI6_D1 */ + J721S2_IOPAD(0x0dc, PIN_OUTPUT, 7) /* (AH26) SPI0_D1.GPIO0_55 */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x05c, PIN_INPUT, 11) /* (AA26) MCASP2_AXR0.UART1_CTSn */ + J721S2_IOPAD(0x060, PIN_OUTPUT, 11) /* (AC27) MCASP2_AXR1.UART1_RTSn */ + J721S2_IOPAD(0x054, PIN_INPUT, 11) /* (Y27) MCASP2_ACLKX.UART1_RXD */ + J721S2_IOPAD(0x058, PIN_OUTPUT, 11) /* (AA27) MCASP2_AFSX.UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d8, PIN_INPUT, 11) /* (AG26) SPI0_D0.UART2_RXD */ + J721S2_IOPAD(0x068, PIN_OUTPUT, 11) /* (U28) MCAN0_RX.UART2_TXD */ + >; + }; + + main_uart8_pins_default: main-uart8-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ + J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + >; + }; +}; + +&wkup_pmx2 { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + >; + }; + + mcu_spi0_pins_default: mcu-spi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x038, PIN_INPUT, 0) /* (B27) MCU_SPI0_CLK */ + J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B26) MCU_SPI0_CS0 */ + J721S2_WKUP_IOPAD(0x068, PIN_INPUT, 2) /* (C23) WKUP_GPIO0_4.MCU_SPI0_CS3 */ + J721S2_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (D24) MCU_SPI0_D0 */ + J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 0) /* (B25) MCU_SPI0_D1 */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + bootph-all; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&i2c_som_rtc { + trickle-resistor-ohms = <3000>; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + status = "okay"; + + exp1: gpio@20 { + compatible = "nxp,pca9672"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HALF/nFULL_EN", "RS485/nRS232_EN", "MCU_ETH_nRESET", "", + "PCIe_nRESET", "USB2.0-Hub_nRESET", "USB3.0-Hub_nRESET", "PEB_AV_BL_EN"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "RPI_GPIO4", "RPI_GPIO5", "RPI_GPIO6", "RPI_GPIO19", + "RPI_GPIO20", "RPI_GPIO21", "RPI_GPIO22", "RPI_GPIO23", + "RPI_GPIO24", "RPI_GPIO25", "RPI_GPIO26", "RPI_GPIO20", + "LVDS_BL_nEN", "LVDS_REG_nEN", "CSI_CAM0_nRESET", "CSI_CAM1_nRESET", + "CSI0_CTRL1", "CSI0_CTRL2", "CSI0_CTRL3", "CSI0_CTRL4", + "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", "CSI1_CTRL4"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio0_ioexp_intr_pins_default>; + }; +}; + +/* CSI0 + RPI */ +&main_i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; +}; + +/* CSI1 + PCIe */ +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; +}; + +&main_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan13 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan13_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan16 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +/* SD-Card */ +&main_sdhci1 { + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&main_spi6 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi6_pins_default>; + cs-gpios = <&main_gpio0 55 GPIO_ACTIVE_LOW>; + ti,spi-num-cs = <1>; + ti,pindir-d0-out-d1-in; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&main_uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; + status = "okay"; +}; + +&main_uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; + /* Shared with TFA on this platform */ + power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>; + bootph-all; + status = "okay"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&mcu_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c1_pins_default>; + status = "okay"; +}; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + +/* RPI-Header */ +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +/* RPI-Header */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + }; +}; + +&pcie1_rc { + num-lanes = <1>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>, + <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + + serdes0_usb_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 2>; + cdns,phy-type = <PHY_TYPE_USB3>; + }; +}; + +&tscadc0 { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + + adc { + ti,adc-channels = <3 4 5 6 7>; + }; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 1 */ +}; + +&wkup_i2c0 { + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + }; + + led-controller@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + label = "user-led1"; + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + label = "user-led2"; + type = <PCA9532_TYPE_LED>; + }; + + led-3 { + label = "user-led3"; + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +/* Shared with TIFS */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + uart-has-rtscts; + bootph-all; + status = "okay"; +};arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +594
-0@@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/ + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j721s2.dtsi" + +/ { + compatible = "phytec,am68-phycore-som", "ti,j721s2"; + model = "PHYTEC phyCORE-AM68x"; + + aliases { + ethernet1 = &main_cpsw_port1; + mmc0 = &main_sdhci0; + rtc0 = &i2c_som_rtc; + }; + + memory@80000000 { + device_type = "memory"; + /* 4GB RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x20000000>; + linux,cma-default; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a8000000 { + reg = <0x00 0xa8000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; + }; + + vdd_sd_dv: regulator-sd { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "VDD_SD_DV"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>; + states = <3300000 0x0>, + <1800000 0x1>; + }; +}; + +&main_pmx0 { + main_cpsw_mdio_pins_default: main-cpsw-mdio-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */ + J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ + J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */ + J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */ + J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */ + J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */ + J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */ + J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */ + J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */ + J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */ + J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */ + J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */ + J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */ + J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x004, PIN_OUTPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + >; + }; +}; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x098, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */ + >; + bootph-all; + }; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; + status = "okay"; +}; + +&c71_1 { + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; + status = "okay"; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + status = "okay"; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + status = "okay"; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&main_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + status = "okay"; +}; + +&main_cpsw_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw_mdio_pins_default>; + status = "okay"; + + phy1: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&main_cpsw_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + + temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +/* eMMC */ +&main_sdhci0 { + disable-wp; + non-removable; + ti,driver-strength-ohm = <50>; + bootph-all; + status = "okay"; +}; + +/* SD card */ +&main_sdhci1 { + vqmmc-supply = <&vdd_sd_dv>; + bootph-all; +}; + +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&wkup_gpio0 { + status = "okay"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu_avs: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck12-supply = <&vcc_3v3>; + buck3-supply = <&vcc_3v3>; + buck4-supply = <&vcc_3v3>; + buck5-supply = <&vcc_3v3>; + ldo1-supply = <&vcc_3v3>; + ldo2-supply = <&vcc_3v3>; + ldo3-supply = <&vcc_3v3>; + ldo4-supply = <&vcc_3v3>; + ti,primary-pmic; + + regulators { + bucka12: buck12 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "VDD_RAM_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "VDD_IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "VDD_MCU_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "VDD_MCUIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "VDD_MCUIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "VDDA_DLL_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "VDDA_MCU_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + bootph-all; + }; + + som_eeprom_opt: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +};
PATCH v2 3/3 arm64: defconfig: Enable TMP102 as module
In reply to Dominik HallerEnable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.
---
Notes:
Changes in v2:
- new patch in series
arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m +CONFIG_SENSORS_TMP102=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y
Signature · 1 line
2.43.0
Quoted 18 lines · Dominik Haller
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
Signed-off-by Dominik Haller <[email protected]>---
Notes:
Changes in v2:
- no changesDocumentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/arm/ti/k3.yaml +0
-0
Documentation/devicetree/bindings/arm/ti/k3.yaml properties: · line 139
Quoted 5 lines
Documentation/devicetree/bindings/arm/ti/k3.yaml +2
-0@@ -135,6 +135,8 @@ properties: - description: K3 J721s2 SoC items: - enum: + - phytec,am68-phyboard-izar + - phytec,am68-phycore-som
This looks wrong, if I am not misunderstanding. Your izar dts includes the som dtsi, so this should be configured with a fallback, so you're going "phytec,am68-phyboard-izar", "phytec,am68-phycore-som", "ti,j721s2", no?
Quoted 6 lines
Documentation/devicetree/bindings/arm/ti/k3.yaml +0
-0- ti,am68-sk - ti,j721s2-evm - const: ti,j721s2Signature · 1 line
2.43.0
Quoted 24 lines · Conor Dooley
Quoted 23 lines · Dominik Haller
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
Signed-off-by Dominik Haller <[email protected]>---
Notes:
Changes in v2:
- no changesDocumentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++
1 file changed, 2 insertions(+)Documentation/devicetree/bindings/arm/ti/k3.yaml +0
-0@@ -135,6 +135,8 @@ properties:- description: K3 J721s2 SoC
items:
- enum:
+ - phytec,am68-phyboard-izar
Quoted 8 lines
Quoted 1 line
+ - phytec,am68-phycore-som
This looks wrong, if I am not misunderstanding. Your izar dts includes
the som dtsi, so this should be configured with a fallback, so you're going "phytec,am68-phyboard-izar", "phytec,am68-phycore-som", "ti,j721s2",
no?
The compatibles are "phytec,am68-phyboard-izar", "ti,j721s2"; in the dts and "phytec,am68-phycore-som", "ti,j721s2"; in the dtsi now.
So when I add the phytec,am68-phycore-som comaptible to the dts I'll move my bindings into an own entry and use a second const for the som:
- description: K3 J721S2 SoC Phytec SoM based boards items:
- enum:
- phytec,am68-phyboard-izar
- const: phytec,am68-phycore-som
- const: ti,j721s2
Quoted 7 lines
Quoted 7 lines
- ti,am68-sk
- ti,j721s2-evm
- const: ti,j721s2Signature · 1 line
2.43.0
Quoted 39 lines · Dominik Haller
Quoted 24 lines · Conor Dooley
Quoted 23 lines · Dominik Haller
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
Signed-off-by Dominik Haller <[email protected]>---
Notes:
Changes in v2:
- no changesDocumentation/devicetree/bindings/arm/ti/k3.yaml | 2 ++
1 file changed, 2 insertions(+)Documentation/devicetree/bindings/arm/ti/k3.yaml +0
-0@@ -135,6 +135,8 @@ properties:- description: K3 J721s2 SoC
items:
- enum:
+ - phytec,am68-phyboard-izarQuoted 8 lines
Quoted 1 line
+ - phytec,am68-phycore-som
This looks wrong, if I am not misunderstanding. Your izar dts includes
the som dtsi, so this should be configured with a fallback, so you're going "phytec,am68-phyboard-izar", "phytec,am68-phycore-som", "ti,j721s2",
no?The compatibles are "phytec,am68-phyboard-izar", "ti,j721s2"; in the dts and "phytec,am68-phycore-som", "ti,j721s2"; in the dtsi now.
So when I add the phytec,am68-phycore-som comaptible to the dts I'll move my bindings into an own entry and use a second const for the som:
Quoted 6 lines
- description: K3 J721S2 SoC Phytec SoM based boards items:
- enum:
- phytec,am68-phyboard-izar
- const: phytec,am68-phycore-som
- const: ti,j721s2
This looks more like what I'd expect, ye.