dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Subsystems (2)
PATCH v4 1/3 dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
---
Notes:
Changes in v4:
- picked up Reviewed-by: Wadim Egorov and Acked-by: Krzysztof Kozlowski
Changes in v3:
- reorganized compatibles into their own entry
Changes in v2:
- no changes
Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +7 -0
@@ -139,6 +139,13 @@ properties: - ti,j721s2-evm - const: ti,j721s2 + - description: K3 J721s2 SoC Phytec SoM based boards + items: + - enum: + - phytec,am68-phyboard-izar + - const: phytec,am68-phycore-som + - const: ti,j721s2 + - description: K3 J722S SoC and Boards items: - enum:
Signature · 1 line
2.43.0
PATCH v4 2/3 arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe
For more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/
---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124
Link to v3:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes in v4:
- set wkup_uart0 to reserved and dropped flow control pins
- dropped disable-wp from eMMC node
- added bootph tags to pmic regulators for ESM support
- picked up Reviewed-by: Wadim Egorov
Changes in v3:
- added phytec,am68-phycore-som compatible
- picked up Acked-by: Moteen Shah
Changes in v2:
- aliases reordered
- stdout-path set to &main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message
arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 575 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 601 ++++++++++++++++++ 3 files changed, 1177 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
arch/arm64/boot/dts/ti/Makefile +1 -0
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +575 -0
575 lines not on this page · raw message
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +601 -0
601 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v4 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
Thanks for update Dominik
Quoted 55 lines · Dominik Haller
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIeFor more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>Acked-by Moteen Shah <[email protected]>Reviewed-by Wadim Egorov <[email protected]>---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124Link to v3:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Changes in v4:
- setwkup_uart0to reserved and dropped flow control pins
- dropped disable-wp from eMMC node
- added bootph tags to pmic regulators for ESM support
- picked up Reviewed-by: Wadim EgorovChanges in v3:
- added phytec,am68-phycore-som compatible
- picked up Acked-by: Moteen Shah
Quoted 5 lines
Changes in v2:
- aliases reordered
- stdout-path set to&main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message
Quoted 7 lines
arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 575 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 601 ++++++++++++++++++ 3 files changed, 1177 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dtscreate mode 100644arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
[..]
PATCH v4 3/3 arm64: defconfig: Enable TMP102 as module
In reply to Dominik HallerEnable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.
---
Notes:
Changes in v4:
- no changes
Changes in v3:
- no changes
Changes in v2:
- new patch in series
arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m +CONFIG_SENSORS_TMP102=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y
Signature · 1 line
2.43.0
Re: [PATCH v4 3/3] arm64: defconfig: Enable TMP102 as module
Quoted 24 lines · Dominik Haller
Enable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.
Signed-off-by Dominik Haller <[email protected]>---
Notes:
Changes in v4:
- no changesChanges in v3:
- no changesChanges in v2:
- new patch in seriesarch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)arch/arm64/configs/defconfig +0
-0
arch/arm64/configs/defconfig CONFIG_SENSORS_RASPBERRYPI_HWMON=m · line 705
Quoted 4 lines
arch/arm64/configs/defconfig +1
-0@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m +CONFIG_SENSORS_TMP102=m
Quoted 3 lines
arch/arm64/configs/defconfig +0
-0CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y
Hi Dominik Haller,
Quoted 4 lines · Dominik Haller
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
I have applied the following to branch ti-k3-dts-next on [1].
[1/3] dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
commit: 5d15c4395fd360ab894a28c6a7c8ca44593cdc61
[2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
commit: 8bc3b1c8645213ffc22f48238e2f325cc4fa29d0I have applied the following to branch ti-k3-config-next on [1].
[3/3] arm64: defconfig: Enable TMP102 as module
commit: 8d8f28da8f9055acf3bd8fa4c6cb05140c505baf
Thank you!
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D