Skip to contentSkip to conversation

dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware

PATCH Applied Dominik Haller 3 participants 6 messages Apr 23, 2025 – Apr 25, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware

Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.

---

Notes:
Changes in v4:
- picked up Reviewed-by: Wadim Egorov and Acked-by: Krzysztof Kozlowski

Changes in v3:
- reorganized compatibles into their own entry

Changes in v2:
- no changes

 Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +7 -0
index 18f155cd06c8..30631daf9a84 100644
@@ -139,6 +139,13 @@ properties:
               - ti,j721s2-evm
           - const: ti,j721s2
 
+      - description: K3 J721s2 SoC Phytec SoM based boards
+        items:
+          - enum:
+              - phytec,am68-phyboard-izar
+          - const: phytec,am68-phycore-som
+          - const: ti,j721s2
+
       - description: K3 J722S SoC and Boards
         items:
           - enum:
Signature · 1 line
2.43.0
#1 lore raw

PATCH v4 2/3 arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x

The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.

A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].

Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe

For more details see the product pages for the SoM and the development kit:

[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/

---

Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124

Link to v3:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Changes in v4:
- set wkup_uart0 to reserved and dropped flow control pins
- dropped disable-wp from eMMC node
- added bootph tags to pmic regulators for ESM support
- picked up Reviewed-by: Wadim Egorov

Changes in v3:
- added phytec,am68-phycore-som compatible
- picked up Acked-by: Moteen Shah

Changes in v2:
- aliases reordered
- stdout-path set to &main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message

 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am68-phyboard-izar.dts     | 575 +++++++++++++++++
 .../boot/dts/ti/k3-am68-phycore-som.dtsi      | 601 ++++++++++++++++++
 3 files changed, 1177 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
arch/arm64/boot/dts/ti/Makefile +1 -0
index 03d4cecfc001..3f18ca4029c3 100644
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo
 
 # Boards with J721s2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +575 -0

575 lines not on this page · raw message

arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +601 -0

601 lines not on this page · raw message

Signature · 1 line
2.43.0
Reviewed-by on v4 2/3
#2 lore raw

Re: [PATCH v4 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x

Thanks for update Dominik

Quoted 55 lines · Dominik Haller

The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.

A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].

Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe

For more details see the product pages for the SoM and the development kit:

[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/

---

Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124

Link to v3:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/

Changes in v4:
- set wkup_uart0 to reserved and dropped flow control pins
- dropped disable-wp from eMMC node
- added bootph tags to pmic regulators for ESM support
- picked up Reviewed-by: Wadim Egorov

Changes in v3:
- added phytec,am68-phycore-som compatible
- picked up Acked-by: Moteen Shah

Quoted 5 lines

Changes in v2:
- aliases reordered
- stdout-path set to &main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message

Quoted 7 lines
  arch/arm64/boot/dts/ti/Makefile               |   1 +
  .../boot/dts/ti/k3-am68-phyboard-izar.dts     | 575 +++++++++++++++++
  .../boot/dts/ti/k3-am68-phycore-som.dtsi      | 601 ++++++++++++++++++
  3 files changed, 1177 insertions(+)

create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
[..]

#3 lore raw

PATCH v4 3/3 arm64: defconfig: Enable TMP102 as module

In reply to Dominik Haller

Enable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.

---

Notes:
Changes in v4:
- no changes

Changes in v3:
- no changes

Changes in v2:
- new patch in series

 arch/arm64/configs/defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
index 5bb8f09422a2..54e6705f9752 100644
@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_TMP102=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_DEVFREQ_THERMAL=y
Signature · 1 line
2.43.0
Reviewed-by on v4 3/3
#4 lore raw

Re: [PATCH v4 3/3] arm64: defconfig: Enable TMP102 as module

Quoted 24 lines · Dominik Haller

Enable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.

---

Notes:
Changes in v4:
- no changes

Changes in v3:
- no changes

Changes in v2:
- new patch in series

  arch/arm64/configs/defconfig | 1 +
  1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +0 -0
index 5bb8f09422a2..54e6705f9752 100644

arch/arm64/configs/defconfig CONFIG_SENSORS_RASPBERRYPI_HWMON=m · line 705

Quoted 4 lines
arch/arm64/configs/defconfig +1 -0
@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m
  CONFIG_SENSORS_SL28CPLD=m
  CONFIG_SENSORS_INA2XX=m
  CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_TMP102=m
Quoted 3 lines
arch/arm64/configs/defconfig +0 -0
  CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
  CONFIG_CPU_THERMAL=y
  CONFIG_DEVFREQ_THERMAL=y
maintainer Applied
#5 lore raw
In reply to Dominik Haller

Hi Dominik Haller,

Quoted 4 lines · Dominik Haller

Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.

I have applied the following to branch ti-k3-dts-next on [1].

[1/3] dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware

      commit: 5d15c4395fd360ab894a28c6a7c8ca44593cdc61
[2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
      commit: 8bc3b1c8645213ffc22f48238e2f325cc4fa29d0

I have applied the following to branch ti-k3-config-next on [1].

[3/3] arm64: defconfig: Enable TMP102 as module

      commit: 8d8f28da8f9055acf3bd8fa4c6cb05140c505baf

Thank you!

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git

Signature · 3 lines
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D