Skip to contentSkip to conversation

tools: ynl-gen: additional C types and classic netlink handling

PATCH Superseded Jakub Kicinski 3 participants 26 messages Apr 25, 2025 – Apr 29, 2025

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Jakub Kicinski

author maintainer
#0 lore raw

v2 cover tools: ynl-gen: additional C types and classic netlink handling

This series is a bit of a random grab bag adding things we need to generate code for rt-link.

First two patches are pretty random code cleanups.

Patch 3 adds default values if the spec is missing them.

Patch 4 adds support for setting Netlink request flags (NLM_F_CREATE, NLM_F_REPLACE etc.). Classic netlink uses those quite a bit.

Patches 5 and 6 extend the notification handling for variations used in classic netlink. Patch 6 adds support for when notification ID is the same as the ID of the response message to GET.

Next 4 patches add support for handling a couple of complex types. These are supported by the schema and Python but C code gen wasn't there.

Patch 11 is a bit of a hack, it skips code related to kernel policy generation, since we don't need it for classic netlink.

Patch 12 adds support for having different fixed headers per op. Something we could avoid in previous rtnetlink specs but some specs do mix.

v2:
- [patch 3] use Jake's suggestion
- [patch 11] move comment
v1: https://lore.kernel.org/[email protected]

Jakub Kicinski (12):
tools: ynl-gen: fix comment about nested struct dict
tools: ynl-gen: factor out free_needs_iter for a struct
tools: ynl-gen: fill in missing empty attr lists
tools: ynl: let classic netlink requests specify extra nlflags
tools: ynl-gen: support using dump types for ntf
tools: ynl-gen: support CRUD-like notifications for classic Netlink
tools: ynl-gen: multi-attr: type gen for string
tools: ynl-gen: mutli-attr: support binary types with struct
tools: ynl-gen: array-nest: support put for scalar
tools: ynl-gen: array-nest: support binary array with exact-len
tools: ynl-gen: don't init enum checks for classic netlink
tools: ynl: allow fixed-header to be specified per op

 tools/net/ynl/lib/ynl-priv.h     |   2 +-
 tools/net/ynl/lib/ynl.h          |  14 ++
 tools/net/ynl/lib/ynl.c          |  12 +-
 tools/net/ynl/pyynl/ynl_gen_c.py | 216 +++++++++++++++++++++++++------
 4 files changed, 196 insertions(+), 48 deletions(-)
Signature · 1 line
2.49.0
author maintainer
#1 lore raw

PATCH v2 1/12 tools: ynl-gen: fix comment about nested struct dict

The dict stores struct objects (of class Struct), not just a trivial set with directions.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/net/ynl/pyynl/ynl_gen_c.py +1 -1
index 9613a6135003..077aacd5f33a 100755
@@ -1015,7 +1015,7 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
 
         # dict space-name -> 'request': set(attrs), 'reply': set(attrs)
         self.root_sets = dict()
-        # dict space-name -> set('request', 'reply')
+        # dict space-name -> Struct
         self.pure_nested_structs = dict()
 
         self._mark_notify()
Signature · 1 line
2.49.0
author maintainer
#3 lore raw

PATCH v2 2/12 tools: ynl-gen: factor out free_needs_iter for a struct

In reply to Jakub Kicinski

Instead of walking the entries in the code gen add a method for the struct class to return if any of the members need an iterator.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
tools/net/ynl/pyynl/ynl_gen_c.py +9 -5
index 077aacd5f33a..90f7fe6b623b 100755
@@ -809,6 +809,12 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             raise Exception("Inheriting different members not supported")
         self.inherited = [c_lower(x) for x in sorted(self._inherited)]
 
+    def free_needs_iter(self):
+        for _, attr in self.attr_list:
+            if attr.free_needs_iter():
+                return True
+        return False
+
 
 class EnumEntry(SpecEnumEntry):
     def __init__(self, enum_set, yaml, prev, value_start):
@@ -2156,11 +2162,9 @@ _C_KW = {
 
 
 def _free_type_members_iter(ri, struct):
-    for _, attr in struct.member_list():
-        if attr.free_needs_iter():
-            ri.cw.p('unsigned int i;')
-            ri.cw.nl()
-            break
+    if struct.free_needs_iter():
+        ri.cw.p('unsigned int i;')
+        ri.cw.nl()
 
 
 def _free_type_members(ri, var, struct, ref=''):
Signature · 1 line
2.49.0
author maintainer
#5 lore raw

PATCH v2 3/12 tools: ynl-gen: fill in missing empty attr lists

In reply to Jakub Kicinski

The C codegen refers to op attribute lists all over the place, without checking if they are present, even tho attribute list is technically an optional property. Add them automatically at init if missing so that we don't have to make specs longer.

---
v2:
- use Jake's suggestion
v1: https://lore.kernel.org/[email protected]

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 8 ++++++++
 1 file changed, 8 insertions(+)
tools/net/ynl/pyynl/ynl_gen_c.py +8 -0
index 90f7fe6b623b..898c41a7a81f 100755
@@ -938,6 +938,14 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
 
 class Operation(SpecOperation):
     def __init__(self, family, yaml, req_value, rsp_value):
+        # Fill in missing operation properties (for fixed hdr-only msgs)
+        for mode in ['do', 'dump', 'event']:
+            for direction in ['request', 'reply']:
+                try:
+                    yaml[mode][direction].setdefault('attributes', [])
+                except KeyError:
+                    pass
+
         super().__init__(family, yaml, req_value, rsp_value)
 
         self.render_name = c_lower(family.ident_name + '_' + self.name)
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 3/12
#6 lore raw

Re: [PATCH net-next v2 03/12] tools: ynl-gen: fill in missing empty attr lists

Quoted 7 lines · Jakub Kicinski

The C codegen refers to op attribute lists all over the place, without checking if they are present, even tho attribute list is technically an optional property. Add them automatically at init if missing so that we don't have to make specs longer.

author maintainer
#7 lore raw

PATCH v2 4/12 tools: ynl: let classic netlink requests specify extra nlflags

In reply to Jakub Kicinski

Classic netlink makes extensive use of flags. Support specifying them the same way as attributes are specified (using a helper), for example:

     rt_link_newlink_req_set_nlflags(req, NLM_F_CREATE | NLM_F_ECHO);

Wrap the code up in a RenderInfo predicate. I think that some genetlink families may want this, too. It should be easy to add a spec property later.

---
 tools/net/ynl/lib/ynl-priv.h     |  2 +-
 tools/net/ynl/lib/ynl.c          |  4 ++--
 tools/net/ynl/pyynl/ynl_gen_c.py | 21 ++++++++++++++++++++-
 3 files changed, 23 insertions(+), 4 deletions(-)
tools/net/ynl/lib/ynl-priv.h +1 -1
index 634eb16548b9..5debb09491e7 100644
@@ -94,7 +94,7 @@ struct ynl_ntf_base_type {
 	unsigned char data[] __attribute__((aligned(8)));
 };
 
-struct nlmsghdr *ynl_msg_start_req(struct ynl_sock *ys, __u32 id);
+struct nlmsghdr *ynl_msg_start_req(struct ynl_sock *ys, __u32 id, __u16 flags);
 struct nlmsghdr *ynl_msg_start_dump(struct ynl_sock *ys, __u32 id);
 
 struct nlmsghdr *
tools/net/ynl/lib/ynl.c +2 -2
index 70f899a54007..c16f01372ca3 100644
@@ -451,9 +451,9 @@ ynl_gemsg_start(struct ynl_sock *ys, __u32 id, __u16 flags,
 	return nlh;
 }
 
-struct nlmsghdr *ynl_msg_start_req(struct ynl_sock *ys, __u32 id)
+struct nlmsghdr *ynl_msg_start_req(struct ynl_sock *ys, __u32 id, __u16 flags)
 {
-	return ynl_msg_start(ys, id, NLM_F_REQUEST | NLM_F_ACK);
+	return ynl_msg_start(ys, id, NLM_F_REQUEST | NLM_F_ACK | flags);
 }
 
 struct nlmsghdr *ynl_msg_start_dump(struct ynl_sock *ys, __u32 id)
tools/net/ynl/pyynl/ynl_gen_c.py +20 -1
index 898c41a7a81f..c035abb8ae1c 100755
@@ -1294,6 +1294,9 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
     def type_empty(self, key):
         return len(self.struct[key].attr_list) == 0 and self.fixed_hdr is None
 
+    def needs_nlflags(self, direction):
+        return self.op_mode == 'do' and direction == 'request' and self.family.is_classic()
+
 
 class CodeWriter:
     def __init__(self, nlib, out_file=None, overwrite=True):
@@ -1924,7 +1927,7 @@ _C_KW = {
     ri.cw.write_func_lvar(local_vars)
 
     if ri.family.is_classic():
-        ri.cw.p(f"nlh = ynl_msg_start_req(ys, {ri.op.enum_name});")
+        ri.cw.p(f"nlh = ynl_msg_start_req(ys, {ri.op.enum_name}, req->_nlmsg_flags);")
     else:
         ri.cw.p(f"nlh = ynl_gemsg_start_req(ys, {ri.nl.get_family_id()}, {ri.op.enum_name}, 1);")
 
@@ -2053,6 +2056,16 @@ _C_KW = {
     ri.cw.write_func_prot('void', f"{name}_free", [f"struct {struct_name} *{arg}"], suffix=suffix)
 
 
+def print_nlflags_set(ri, direction):
+    name = op_prefix(ri, direction)
+    ri.cw.write_func_prot(f'static inline void', f"{name}_set_nlflags",
+                          [f"struct {name} *req", "__u16 nl_flags"])
+    ri.cw.block_start()
+    ri.cw.p('req->_nlmsg_flags = nl_flags;')
+    ri.cw.block_end()
+    ri.cw.nl()
+
+
 def _print_type(ri, direction, struct):
     suffix = f'_{ri.type_name}{direction_to_suffix[direction]}'
     if not direction and ri.type_name_conflict:
@@ -2063,6 +2076,9 @@ _C_KW = {
 
     ri.cw.block_start(line=f"struct {ri.family.c_name}{suffix}")
 
+    if ri.needs_nlflags(direction):
+        ri.cw.p('__u16 _nlmsg_flags;')
+        ri.cw.nl()
     if ri.fixed_hdr:
         ri.cw.p(ri.fixed_hdr + ' _hdr;')
         ri.cw.nl()
@@ -2102,6 +2118,9 @@ _C_KW = {
     print_free_prototype(ri, direction)
     ri.cw.nl()
 
+    if ri.needs_nlflags(direction):
+        print_nlflags_set(ri, direction)
+
     if ri.ku_space == 'user' and direction == 'request':
         for _, attr in ri.struct[direction].member_list():
             attr.setter(ri, ri.attr_set, direction, deref=deref)
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 4/12
#8 lore raw

Re: [PATCH net-next v2 04/12] tools: ynl: let classic netlink requests specify extra nlflags

Quoted 4 lines · Jakub Kicinski

Classic netlink makes extensive use of flags. Support specifying them the same way as attributes are specified (using a helper), for example:

Quoted 8 lines
     rt_link_newlink_req_set_nlflags(req, NLM_F_CREATE | NLM_F_ECHO);

Wrap the code up in a RenderInfo predicate. I think that some genetlink families may want this, too. It should be easy to add a spec property later.

author maintainer
#9 lore raw

PATCH v2 5/12 tools: ynl-gen: support using dump types for ntf

In reply to Jakub Kicinski

Classic Netlink has GET callbacks with no doit support, just dumps. Support using their responses in notifications. If notification points at a type which only has a dump - use the dump's type.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/net/ynl/pyynl/ynl_gen_c.py +1 -1
index c035abb8ae1c..0febbb3912e3 100755
@@ -1281,7 +1281,7 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
 
         self.struct = dict()
         if op_mode == 'notify':
-            op_mode = 'do'
+            op_mode = 'do' if 'do' in op else 'dump'
         for op_dir in ['request', 'reply']:
             if op:
                 type_list = []
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 5/12
#10 lore raw

Re: [PATCH net-next v2 05/12] tools: ynl-gen: support using dump types for ntf

Quoted 6 lines · Jakub Kicinski

Classic Netlink has GET callbacks with no doit support, just dumps. Support using their responses in notifications. If notification points at a type which only has a dump - use the dump's type.

author maintainer
#11 lore raw

PATCH v2 6/12 tools: ynl-gen: support CRUD-like notifications for classic Netlink

In reply to Jakub Kicinski

Allow CRUD-style notification where the notification is more like the response to the request, which can optionally be looped back onto the requesting socket. Since the notification and request are different ops in the spec, for example:

    -
      name: delrule
      doc: Remove an existing FIB rule
      attribute-set: fib-rule-attrs
      do:
        request:
          value: 33
          attributes: *fib-rule-all
    -
      name: delrule-ntf
      doc: Notify a rule deletion
      value: 33
      notify: getrule

We need to find the request by ID. Ideally we'd detect this model from the spec properties, rather than assume that its what all classic netlink families do. But maybe that'd cause this model to spread and its easy to get wrong. For now assume CRUD == classic.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
tools/net/ynl/pyynl/ynl_gen_c.py +5 -1
index 0febbb3912e3..31e904f1a2f0 100755
@@ -2787,7 +2787,11 @@ _C_KW = {
 
 
 def _render_user_ntf_entry(ri, op):
-    ri.cw.block_start(line=f"[{op.enum_name}] = ")
+    if not ri.family.is_classic():
+        ri.cw.block_start(line=f"[{op.enum_name}] = ")
+    else:
+        crud_op = ri.family.req_by_value[op.rsp_value]
+        ri.cw.block_start(line=f"[{crud_op.enum_name}] = ")
     ri.cw.p(f".alloc_sz\t= sizeof({type_name(ri, 'event')}),")
     ri.cw.p(f".cb\t\t= {op_prefix(ri, 'reply', deref=True)}_parse,")
     ri.cw.p(f".policy\t\t= &{ri.struct['reply'].render_name}_nest,")
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 6/12
#12 lore raw

Re: [PATCH net-next v2 06/12] tools: ynl-gen: support CRUD-like notifications for classic Netlink

Quoted 19 lines · Jakub Kicinski

Allow CRUD-style notification where the notification is more like the response to the request, which can optionally be looped back onto the requesting socket. Since the notification and request are different ops in the spec, for example:

    -
      name: delrule
      doc: Remove an existing FIB rule
      attribute-set: fib-rule-attrs
      do:
        request:
          value: 33
          attributes: *fib-rule-all
    -
      name: delrule-ntf
      doc: Notify a rule deletion
      value: 33
      notify: getrule
Quoted 7 lines

We need to find the request by ID. Ideally we'd detect this model from the spec properties, rather than assume that its what all classic netlink families do. But maybe that'd cause this model to spread and its easy to get wrong. For now assume CRUD == classic.

author maintainer
#13 lore raw

PATCH v2 7/12 tools: ynl-gen: multi-attr: type gen for string

In reply to Jakub Kicinski

Add support for multi attr strings (needed for link alt_names). We record the length individual strings in a len member, to do the same for multi-attr create a struct ynl_string in ynl.h and use it as a layer holding both the string and its length. Since strings may be arbitrary length dynamically allocate each individual one.

Adjust arg_member and struct member to avoid spacing the double pointers to get "type **name;" rather than "type * *name;"

---
 tools/net/ynl/lib/ynl.h          | 13 +++++++++++++
 tools/net/ynl/pyynl/ynl_gen_c.py | 29 +++++++++++++++++++++++++----
 2 files changed, 38 insertions(+), 4 deletions(-)
tools/net/ynl/lib/ynl.h +13 -0
index 59256e258130..0b4acc0d288a 100644
@@ -85,6 +85,19 @@ struct ynl_sock {
 	unsigned char raw_buf[];
 };
 
+/**
+ * struct ynl_string - parsed individual string
+ * @len: length of the string (excluding terminating character)
+ * @str: valud of the string
+ *
+ * Parsed and nul-terminated string. This struct is only used for arrays of
+ * strings. Non-array string members are placed directly in respective types.
+ */
+struct ynl_string {
+	unsigned int len;
+	char str[];
+};
+
 struct ynl_sock *
 ynl_sock_create(const struct ynl_family *yf, struct ynl_error *e);
 void ynl_sock_destroy(struct ynl_sock *ys);
tools/net/ynl/pyynl/ynl_gen_c.py +25 -4
index 31e904f1a2f0..895bc1ca9505 100755
@@ -175,7 +175,8 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
     def arg_member(self, ri):
         member = self._complex_member_type(ri)
         if member:
-            arg = [member + ' *' + self.c_name]
+            spc = ' ' if member[-1] != '*' else ''
+            arg = [member + spc + '*' + self.c_name]
             if self.presence_type() == 'count':
                 arg += ['unsigned int n_' + self.c_name]
             return arg
@@ -189,7 +190,8 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             ptr = '*' if self.is_multi_val() else ''
             if self.is_recursive_for_op(ri):
                 ptr = '*'
-            ri.cw.p(f"{member} {ptr}{self.c_name};")
+            spc = ' ' if member[-1] != '*' else ''
+            ri.cw.p(f"{member}{spc}{ptr}{self.c_name};")
             return
         members = self.arg_member(ri)
         for one in members:
@@ -638,6 +640,8 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
     def _complex_member_type(self, ri):
         if 'type' not in self.attr or self.attr['type'] == 'nest':
             return self.nested_struct_type
+        elif self.attr['type'] == 'string':
+            return 'struct ynl_string *'
         elif self.attr['type'] in scalars:
             scalar_pfx = '__' if ri.ku_space == 'user' else ''
             return scalar_pfx + self.attr['type']
@@ -645,12 +649,18 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             raise Exception(f"Sub-type {self.attr['type']} not supported yet")
 
     def free_needs_iter(self):
-        return 'type' not in self.attr or self.attr['type'] == 'nest'
+        return self.attr['type'] in {'nest', 'string'}
 
     def _free_lines(self, ri, var, ref):
         lines = []
         if self.attr['type'] in scalars:
             lines += [f"free({var}->{ref}{self.c_name});"]
+        elif self.attr['type'] == 'string':
+            lines += [
+                f"for (i = 0; i < {var}->{ref}n_{self.c_name}; i++)",
+                f"free({var}->{ref}{self.c_name}[i]);",
+                f"free({var}->{ref}{self.c_name});",
+            ]
         elif 'type' not in self.attr or self.attr['type'] == 'nest':
             lines += [
                 f"for (i = 0; i < {var}->{ref}n_{self.c_name}; i++)",
@@ -675,6 +685,9 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             put_type = self.type
             ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
             ri.cw.p(f"ynl_attr_put_{put_type}(nlh, {self.enum_name}, {var}->{self.c_name}[i]);")
+        elif self.attr['type'] == 'string':
+            ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
+            ri.cw.p(f"ynl_attr_put_str(nlh, {self.enum_name}, {var}->{self.c_name}[i]->str);")
         elif 'type' not in self.attr or self.attr['type'] == 'nest':
             ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
             self._attr_put_line(ri, var, f"{self.nested_render_name}_put(nlh, " +
@@ -1834,8 +1847,16 @@ _C_KW = {
             ri.cw.p('return YNL_PARSE_CB_ERROR;')
         elif aspec.type in scalars:
             ri.cw.p(f"dst->{aspec.c_name}[i] = ynl_attr_get_{aspec.type}(attr);")
+        elif aspec.type == 'string':
+            ri.cw.p('unsigned int len;')
+            ri.cw.nl()
+            ri.cw.p('len = strnlen(ynl_attr_get_str(attr), ynl_attr_data_len(attr));')
+            ri.cw.p(f'dst->{aspec.c_name}[i] = malloc(sizeof(struct ynl_string) + len + 1);')
+            ri.cw.p(f"dst->{aspec.c_name}[i]->len = len;")
+            ri.cw.p(f"memcpy(dst->{aspec.c_name}[i]->str, ynl_attr_get_str(attr), len);")
+            ri.cw.p(f"dst->{aspec.c_name}[i]->str[len] = 0;")
         else:
-            raise Exception('Nest parsing type not supported yet')
+            raise Exception(f'Nest parsing of type {aspec.type} not supported yet')
         ri.cw.p('i++;')
         ri.cw.block_end()
         ri.cw.block_end()
Signature · 1 line
2.49.0
reviewer
#14 lore raw

Re: [PATCH net-next v2 07/12] tools: ynl-gen: multi-attr: type gen for string

Quoted 22 lines · Jakub Kicinski

Add support for multi attr strings (needed for link alt_names). We record the length individual strings in a len member, to do the same for multi-attr create a struct ynl_string in ynl.h and use it as a layer holding both the string and its length. Since strings may be arbitrary length dynamically allocate each individual one.

Adjust arg_member and struct member to avoid spacing the double pointers to get "type **name;" rather than "type * *name;"

---
 tools/net/ynl/lib/ynl.h          | 13 +++++++++++++
 tools/net/ynl/pyynl/ynl_gen_c.py | 29 +++++++++++++++++++++++++----
 2 files changed, 38 insertions(+), 4 deletions(-)
tools/net/ynl/lib/ynl.h +0 -0
index 59256e258130..0b4acc0d288a 100644

tools/net/ynl/lib/ynl.h struct ynl_sock { · line 91

Quoted 7 lines
tools/net/ynl/lib/ynl.h +4 -0
@@ -85,6 +85,19 @@ struct ynl_sock {
 	unsigned char raw_buf[];
 };
 
+/**
+ * struct ynl_string - parsed individual string
+ * @len: length of the string (excluding terminating character)
+ * @str: valud of the string

typo: value

...

maintainer Reviewed-by on v2 7/12
#15 lore raw

Re: [PATCH net-next v2 07/12] tools: ynl-gen: multi-attr: type gen for string

In reply to Jakub Kicinski
Quoted 7 lines · Jakub Kicinski

Add support for multi attr strings (needed for link alt_names). We record the length individual strings in a len member, to do the same for multi-attr create a struct ynl_string in ynl.h and use it as a layer holding both the string and its length. Since strings may be arbitrary length dynamically allocate each individual one.

Quoted 5 lines

Adjust arg_member and struct member to avoid spacing the double pointers to get "type **name;" rather than "type * *name;"

author maintainer
#16 lore raw

PATCH v2 8/12 tools: ynl-gen: mutli-attr: support binary types with struct

In reply to Jakub Kicinski

Binary types with struct are fixed size, relatively easy to handle for multi attr. Declare the member as a pointer. Count the members, allocate an array, copy in the data. Allow the netlink attr to be smaller or larger than our view of the struct in case the build headers are newer or older than the running kernel.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
tools/net/ynl/pyynl/ynl_gen_c.py +19 -0
index 895bc1ca9505..a969762d557b 100755
@@ -640,6 +640,8 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
     def _complex_member_type(self, ri):
         if 'type' not in self.attr or self.attr['type'] == 'nest':
             return self.nested_struct_type
+        elif self.attr['type'] == 'binary' and 'struct' in self.attr:
+            return None  # use arg_member()
         elif self.attr['type'] == 'string':
             return 'struct ynl_string *'
         elif self.attr['type'] in scalars:
@@ -648,6 +650,12 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         else:
             raise Exception(f"Sub-type {self.attr['type']} not supported yet")
 
+    def arg_member(self, ri):
+        if self.type == 'binary' and 'struct' in self.attr:
+            return [f'struct {c_lower(self.attr["struct"])} *{self.c_name}',
+                    f'unsigned int n_{self.c_name}']
+        return super().arg_member(ri)
+
     def free_needs_iter(self):
         return self.attr['type'] in {'nest', 'string'}
 
@@ -655,6 +663,8 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         lines = []
         if self.attr['type'] in scalars:
             lines += [f"free({var}->{ref}{self.c_name});"]
+        elif self.attr['type'] == 'binary' and 'struct' in self.attr:
+            lines += [f"free({var}->{ref}{self.c_name});"]
         elif self.attr['type'] == 'string':
             lines += [
                 f"for (i = 0; i < {var}->{ref}n_{self.c_name}; i++)",
@@ -685,6 +695,9 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             put_type = self.type
             ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
             ri.cw.p(f"ynl_attr_put_{put_type}(nlh, {self.enum_name}, {var}->{self.c_name}[i]);")
+        elif self.attr['type'] == 'binary' and 'struct' in self.attr:
+            ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
+            ri.cw.p(f"ynl_attr_put(nlh, {self.enum_name}, &{var}->{self.c_name}[i], sizeof(struct {c_lower(self.attr['struct'])}));")
         elif self.attr['type'] == 'string':
             ri.cw.p(f"for (i = 0; i < {var}->n_{self.c_name}; i++)")
             ri.cw.p(f"ynl_attr_put_str(nlh, {self.enum_name}, {var}->{self.c_name}[i]->str);")
@@ -1847,6 +1860,12 @@ _C_KW = {
             ri.cw.p('return YNL_PARSE_CB_ERROR;')
         elif aspec.type in scalars:
             ri.cw.p(f"dst->{aspec.c_name}[i] = ynl_attr_get_{aspec.type}(attr);")
+        elif aspec.type == 'binary' and 'struct' in aspec:
+            ri.cw.p('size_t len = ynl_attr_data_len(attr);')
+            ri.cw.nl()
+            ri.cw.p(f'if (len > sizeof(dst->{aspec.c_name}[0]))')
+            ri.cw.p(f'len = sizeof(dst->{aspec.c_name}[0]);')
+            ri.cw.p(f"memcpy(&dst->{aspec.c_name}[i], ynl_attr_data(attr), len);")
         elif aspec.type == 'string':
             ri.cw.p('unsigned int len;')
             ri.cw.nl()
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 8/12
#17 lore raw

Re: [PATCH net-next v2 08/12] tools: ynl-gen: mutli-attr: support binary types with struct

Quoted 9 lines · Jakub Kicinski

Binary types with struct are fixed size, relatively easy to handle for multi attr. Declare the member as a pointer. Count the members, allocate an array, copy in the data. Allow the netlink attr to be smaller or larger than our view of the struct in case the build headers are newer or older than the running kernel.

author maintainer
#18 lore raw

PATCH v2 9/12 tools: ynl-gen: array-nest: support put for scalar

In reply to Jakub Kicinski

C codegen supports ArrayNest AKA indexed-array carrying scalars, but only for the netlink -> struct parsing. Support rendering from struct to netlink.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)
tools/net/ynl/pyynl/ynl_gen_c.py +25 -3
index a969762d557b..a4e65da19696 100755
@@ -747,6 +747,23 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
                      '}']
         return get_lines, None, local_vars
 
+    def attr_put(self, ri, var):
+        ri.cw.p(f'array = ynl_attr_nest_start(nlh, {self.enum_name});')
+        if self.sub_type in scalars:
+            put_type = self.sub_type
+            ri.cw.block_start(line=f'for (i = 0; i < {var}->n_{self.c_name}; i++)')
+            ri.cw.p(f"ynl_attr_put_{put_type}(nlh, i, {var}->{self.c_name}[i]);")
+            ri.cw.block_end()
+        else:
+            raise Exception(f"Put for ArrayNest sub-type {self.attr['sub-type']} not supported, yet")
+        ri.cw.p('ynl_attr_nest_end(nlh, array);')
+
+    def _setter_lines(self, ri, member, presence):
+        # For multi-attr we have a count, not presence, hack up the presence
+        presence = presence[:-(len('_present.') + len(self.c_name))] + "n_" + self.c_name
+        return [f"{member} = {self.c_name};",
+                f"{presence} = n_{self.c_name};"]
+
 
 class TypeNestTypeValue(Type):
     def _complex_member_type(self, ri):
@@ -1728,10 +1745,15 @@ _C_KW = {
     local_vars.append('struct nlattr *nest;')
     init_lines.append("nest = ynl_attr_nest_start(nlh, attr_type);")
 
+    has_anest = False
+    has_count = False
     for _, arg in struct.member_list():
-        if arg.presence_type() == 'count':
-            local_vars.append('unsigned int i;')
-            break
+        has_anest |= arg.type == 'indexed-array'
+        has_count |= arg.presence_type() == 'count'
+    if has_anest:
+        local_vars.append('struct nlattr *array;')
+    if has_count:
+        local_vars.append('unsigned int i;')
 
     put_req_nested_prototype(ri, struct, suffix='')
     ri.cw.block_start()
Signature · 1 line
2.49.0
author maintainer
#20 lore raw

PATCH v2 10/12 tools: ynl-gen: array-nest: support binary array with exact-len

In reply to Jakub Kicinski

IPv6 addresses are expressed as binary arrays since we don't have u128. Since they are not variable length, however, they are relatively easy to represent as an array of known size.

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)
tools/net/ynl/pyynl/ynl_gen_c.py +20 -4
index a4e65da19696..2d185c7ea16c 100755
@@ -183,10 +183,10 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         raise Exception(f"Struct member not implemented for class type {self.type}")
 
     def struct_member(self, ri):
-        if self.is_multi_val():
-            ri.cw.p(f"unsigned int n_{self.c_name};")
         member = self._complex_member_type(ri)
         if member:
+            if self.is_multi_val():
+                ri.cw.p(f"unsigned int n_{self.c_name};")
             ptr = '*' if self.is_multi_val() else ''
             if self.is_recursive_for_op(ri):
                 ptr = '*'
@@ -728,12 +728,22 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         elif self.attr['sub-type'] in scalars:
             scalar_pfx = '__' if ri.ku_space == 'user' else ''
             return scalar_pfx + self.attr['sub-type']
+        elif self.attr['sub-type'] == 'binary' and 'exact-len' in self.checks:
+            return None  # use arg_member()
         else:
             raise Exception(f"Sub-type {self.attr['sub-type']} not supported yet")
 
+    def arg_member(self, ri):
+        if self.sub_type == 'binary' and 'exact-len' in self.checks:
+            return [f'unsigned char (*{self.c_name})[{self.checks["exact-len"]}]',
+                    f'unsigned int n_{self.c_name}']
+        return super().arg_member(ri)
+
     def _attr_typol(self):
         if self.attr['sub-type'] in scalars:
             return f'.type = YNL_PT_U{c_upper(self.sub_type[1:])}, '
+        elif self.attr['sub-type'] == 'binary' and 'exact-len' in self.checks:
+            return f'.type = YNL_PT_BINARY, .len = {self.checks["exact-len"]}, '
         else:
             return f'.type = YNL_PT_NEST, .nest = &{self.nested_render_name}_nest, '
 
@@ -754,6 +764,9 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
             ri.cw.block_start(line=f'for (i = 0; i < {var}->n_{self.c_name}; i++)')
             ri.cw.p(f"ynl_attr_put_{put_type}(nlh, i, {var}->{self.c_name}[i]);")
             ri.cw.block_end()
+        elif self.sub_type == 'binary' and 'exact-len' in self.checks:
+            ri.cw.p(f'for (i = 0; i < {var}->n_{self.c_name}; i++)')
+            ri.cw.p(f"ynl_attr_put(nlh, i, {var}->{self.c_name}[i], {self.checks['exact-len']});")
         else:
             raise Exception(f"Put for ArrayNest sub-type {self.attr['sub-type']} not supported, yet")
         ri.cw.p('ynl_attr_nest_end(nlh, array);')
@@ -964,7 +977,7 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         elif elem['type'] == 'nest':
             t = TypeNest(self.family, self, elem, value)
         elif elem['type'] == 'indexed-array' and 'sub-type' in elem:
-            if elem["sub-type"] in ['nest', 'u32']:
+            if elem["sub-type"] in ['binary', 'nest', 'u32']:
                 t = TypeArrayNest(self.family, self, elem, value)
             else:
                 raise Exception(f'new_attr: unsupported sub-type {elem["sub-type"]}')
@@ -1786,7 +1799,7 @@ _C_KW = {
     needs_parg = False
     for arg, aspec in struct.member_list():
         if aspec['type'] == 'indexed-array' and 'sub-type' in aspec:
-            if aspec["sub-type"] == 'nest':
+            if aspec["sub-type"] in {'binary', 'nest'}:
                 local_vars.append(f'const struct nlattr *attr_{aspec.c_name};')
                 array_nests.add(arg)
             elif aspec['sub-type'] in scalars:
@@ -1859,6 +1872,9 @@ _C_KW = {
             ri.cw.p('return YNL_PARSE_CB_ERROR;')
         elif aspec.sub_type in scalars:
             ri.cw.p(f"dst->{aspec.c_name}[i] = ynl_attr_get_{aspec.sub_type}(attr);")
+        elif aspec.sub_type == 'binary' and 'exact-len' in aspec.checks:
+            # Length is validated by typol
+            ri.cw.p(f'memcpy(dst->{aspec.c_name}[i], ynl_attr_data(attr), {aspec.checks["exact-len"]});')
         else:
             raise Exception(f"Nest parsing type not supported in {aspec['name']}")
         ri.cw.p('i++;')
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 10/12
#21 lore raw

Re: [PATCH net-next v2 10/12] tools: ynl-gen: array-nest: support binary array with exact-len

Quoted 6 lines · Jakub Kicinski

IPv6 addresses are expressed as binary arrays since we don't have u128. Since they are not variable length, however, they are relatively easy to represent as an array of known size.

author maintainer
#22 lore raw

PATCH v2 11/12 tools: ynl-gen: don't init enum checks for classic netlink

In reply to Jakub Kicinski

rt-link has a vlan-protocols enum with:

name: 8021q value: 33024
name: 8021ad value: 34984

It's nice to have, since it converts the values to strings in Python. For C, however, the codegen is trying to use enums to generate strict policy checks. Parsing such sparse enums is not possible via policies.

Since for classic netlink we don't support kernel codegen and policy generation - skip the auto-generation of checks from enums.

---
v2:
- move the comment about the skip before the if
v1: https://lore.kernel.org/[email protected]

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 46 ++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 20 deletions(-)
tools/net/ynl/pyynl/ynl_gen_c.py +26 -20
index 2d185c7ea16c..eda9109243e2 100755
@@ -357,26 +357,10 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         if 'byte-order' in attr:
             self.byte_order_comment = f" /* {attr['byte-order']} */"
 
-        if 'enum' in self.attr:
-            enum = self.family.consts[self.attr['enum']]
-            low, high = enum.value_range()
-            if 'min' not in self.checks:
-                if low != 0 or self.type[0] == 's':
-                    self.checks['min'] = low
-            if 'max' not in self.checks:
-                self.checks['max'] = high
-
-        if 'min' in self.checks and 'max' in self.checks:
-            if self.get_limit('min') > self.get_limit('max'):
-                raise Exception(f'Invalid limit for "{self.name}" min: {self.get_limit("min")} max: {self.get_limit("max")}')
-            self.checks['range'] = True
-
-        low = min(self.get_limit('min', 0), self.get_limit('max', 0))
-        high = max(self.get_limit('min', 0), self.get_limit('max', 0))
-        if low < 0 and self.type[0] == 'u':
-            raise Exception(f'Invalid limit for "{self.name}" negative limit for unsigned type')
-        if low < -32768 or high > 32767:
-            self.checks['full-range'] = True
+        # Classic families have some funny enums, don't bother
+        # computing checks we only need them for policy
+        if not family.is_classic():
+            self._init_checks()
 
         # Added by resolve():
         self.is_bitfield = None
@@ -401,6 +385,28 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         else:
             self.type_name = '__' + self.type
 
+    def _init_checks(self):
+        if 'enum' in self.attr:
+            enum = self.family.consts[self.attr['enum']]
+            low, high = enum.value_range()
+            if 'min' not in self.checks:
+                if low != 0 or self.type[0] == 's':
+                    self.checks['min'] = low
+            if 'max' not in self.checks:
+                self.checks['max'] = high
+
+        if 'min' in self.checks and 'max' in self.checks:
+            if self.get_limit('min') > self.get_limit('max'):
+                raise Exception(f'Invalid limit for "{self.name}" min: {self.get_limit("min")} max: {self.get_limit("max")}')
+            self.checks['range'] = True
+
+        low = min(self.get_limit('min', 0), self.get_limit('max', 0))
+        high = max(self.get_limit('min', 0), self.get_limit('max', 0))
+        if low < 0 and self.type[0] == 'u':
+            raise Exception(f'Invalid limit for "{self.name}" negative limit for unsigned type')
+        if low < -32768 or high > 32767:
+            self.checks['full-range'] = True
+
     def _attr_policy(self, policy):
         if 'flags-mask' in self.checks or self.is_bitfield:
             if self.is_bitfield:
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 11/12
#23 lore raw

Re: [PATCH net-next v2 11/12] tools: ynl-gen: don't init enum checks for classic netlink

Quoted 41 lines · Jakub Kicinski

rt-link has a vlan-protocols enum with:

   name: 8021q     value: 33024
   name: 8021ad    value: 34984

It's nice to have, since it converts the values to strings in Python. For C, however, the codegen is trying to use enums to generate strict policy checks. Parsing such sparse enums is not possible via policies.

Since for classic netlink we don't support kernel codegen and policy generation - skip the auto-generation of checks from enums.

---
v2:
- move the comment about the skip before the if
v1: https://lore.kernel.org/[email protected]

---
 tools/net/ynl/pyynl/ynl_gen_c.py | 46 ++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 20 deletions(-)
tools/net/ynl/pyynl/ynl_gen_c.py +0 -12
index 2d185c7ea16c..eda9109243e2 100755
@@ -357,26 +357,10 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         if 'byte-order' in attr:
             self.byte_order_comment = f" /* {attr['byte-order']} */"
 
-        if 'enum' in self.attr:
-            enum = self.family.consts[self.attr['enum']]
-            low, high = enum.value_range()
-            if 'min' not in self.checks:
-                if low != 0 or self.type[0] == 's':
-                    self.checks['min'] = low
-            if 'max' not in self.checks:
-                self.checks['max'] = high
-
-        if 'min' in self.checks and 'max' in self.checks:
-            if self.get_limit('min') > self.get_limit('max'):
-                raise Exception(f'Invalid limit for "{self.name}" min: {self.get_limit("min")} max: {self.get_limit("max")}')

tools/net/ynl/pyynl/ynl_gen_c.py from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S · line 361

Quoted 10 lines
tools/net/ynl/pyynl/ynl_gen_c.py +2 -8
-            self.checks['range'] = True
-
-        low = min(self.get_limit('min', 0), self.get_limit('max', 0))
-        high = max(self.get_limit('min', 0), self.get_limit('max', 0))
-        if low < 0 and self.type[0] == 'u':
-            raise Exception(f'Invalid limit for "{self.name}" negative limit for unsigned type')
-        if low < -32768 or high > 32767:
-            self.checks['full-range'] = True
+        # Classic families have some funny enums, don't bother
+        # computing checks we only need them for policy

grammar nit: computing checks, since we only need ...

author maintainer
#24 lore raw

PATCH v2 12/12 tools: ynl: allow fixed-header to be specified per op

In reply to Jakub Kicinski

rtnetlink has variety of ops with different fixed headers. Detect that op fixed header is not the same as family one, and use sizeof() directly. For reverse parsing we need to pass the fixed header len along the policy (in the socket state).

---
 tools/net/ynl/lib/ynl.h          |  1 +
 tools/net/ynl/lib/ynl.c          |  8 ++++----
 tools/net/ynl/pyynl/ynl_gen_c.py | 17 ++++++++++++++++-
 3 files changed, 21 insertions(+), 5 deletions(-)
tools/net/ynl/lib/ynl.h +1 -0
index 0b4acc0d288a..5a27b8648120 100644
@@ -80,6 +80,7 @@ struct ynl_sock {
 
 	struct nlmsghdr *nlh;
 	const struct ynl_policy_nest *req_policy;
+	size_t req_hdr_len;
 	unsigned char *tx_buf;
 	unsigned char *rx_buf;
 	unsigned char raw_buf[];
tools/net/ynl/lib/ynl.c +4 -4
index c16f01372ca3..d263f6f40ad5 100644
@@ -191,12 +191,12 @@ ynl_ext_ack_check(struct ynl_sock *ys, const struct nlmsghdr *nlh,
 		n = snprintf(bad_attr, sizeof(bad_attr), "%sbad attribute: ",
 			     str ? " (" : "");
 
-		start = ynl_nlmsg_data_offset(ys->nlh, ys->family->hdr_len);
+		start = ynl_nlmsg_data_offset(ys->nlh, ys->req_hdr_len);
 		end = ynl_nlmsg_end_addr(ys->nlh);
 
 		off = ys->err.attr_offs;
 		off -= sizeof(struct nlmsghdr);
-		off -= ys->family->hdr_len;
+		off -= ys->req_hdr_len;
 
 		n += ynl_err_walk(ys, start, end, off, ys->req_policy,
 				  &bad_attr[n], sizeof(bad_attr) - n, NULL);
@@ -216,14 +216,14 @@ ynl_ext_ack_check(struct ynl_sock *ys, const struct nlmsghdr *nlh,
 		n = snprintf(miss_attr, sizeof(miss_attr), "%smissing attribute: ",
 			     bad_attr[0] ? ", " : (str ? " (" : ""));
 
-		start = ynl_nlmsg_data_offset(ys->nlh, ys->family->hdr_len);
+		start = ynl_nlmsg_data_offset(ys->nlh, ys->req_hdr_len);
 		end = ynl_nlmsg_end_addr(ys->nlh);
 
 		nest_pol = ys->req_policy;
 		if (tb[NLMSGERR_ATTR_MISS_NEST]) {
 			off = ynl_attr_get_u32(tb[NLMSGERR_ATTR_MISS_NEST]);
 			off -= sizeof(struct nlmsghdr);
-			off -= ys->family->hdr_len;
+			off -= ys->req_hdr_len;
 
 			n += ynl_err_walk(ys, start, end, off, ys->req_policy,
 					  &miss_attr[n], sizeof(miss_attr) - n,
tools/net/ynl/pyynl/ynl_gen_c.py +16 -1
index eda9109243e2..e0025f070f3b 100755
@@ -1311,8 +1311,15 @@ from lib import SpecFamily, SpecAttrSet, SpecAttr, SpecOperation, SpecEnumSet, S
         self.op = op
 
         self.fixed_hdr = None
+        self.fixed_hdr_len = 'ys->family->hdr_len'
         if op and op.fixed_header:
             self.fixed_hdr = 'struct ' + c_lower(op.fixed_header)
+            if op.fixed_header != family.fixed_header:
+                if family.is_classic():
+                    self.fixed_hdr_len = f"sizeof({self.fixed_hdr})"
+                else:
+                    raise Exception(f"Per-op fixed header not supported, yet")
+
 
         # 'do' and 'dump' response parsing is identical
         self.type_consistent = True
@@ -1799,6 +1806,11 @@ _C_KW = {
         if ri.fixed_hdr:
             local_vars += ['void *hdr;']
         iter_line = "ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len)"
+        if ri.op.fixed_header != ri.family.fixed_header:
+            if ri.family.is_classic():
+                iter_line = f"ynl_attr_for_each(attr, nlh, sizeof({ri.fixed_hdr}))"
+            else:
+                raise Exception(f"Per-op fixed header not supported, yet")
 
     array_nests = set()
     multi_attrs = set()
@@ -2016,6 +2028,7 @@ _C_KW = {
         ri.cw.p(f"nlh = ynl_gemsg_start_req(ys, {ri.nl.get_family_id()}, {ri.op.enum_name}, 1);")
 
     ri.cw.p(f"ys->req_policy = &{ri.struct['request'].render_name}_nest;")
+    ri.cw.p(f"ys->req_hdr_len = {ri.fixed_hdr_len};")
     if 'reply' in ri.op[ri.op_mode]:
         ri.cw.p(f"yrs.yarg.rsp_policy = &{ri.struct['reply'].render_name}_nest;")
     ri.cw.nl()
@@ -2095,6 +2108,7 @@ _C_KW = {
 
     if "request" in ri.op[ri.op_mode]:
         ri.cw.p(f"ys->req_policy = &{ri.struct['request'].render_name}_nest;")
+        ri.cw.p(f"ys->req_hdr_len = {ri.fixed_hdr_len};")
         ri.cw.nl()
         for _, attr in ri.struct["request"].member_list():
             attr.attr_put(ri, "req")
@@ -2914,7 +2928,8 @@ _C_KW = {
         cw.p(f'.is_classic\t= true,')
         cw.p(f'.classic_id\t= {family.get("protonum")},')
     if family.is_classic():
-        cw.p(f'.hdr_len\t= sizeof(struct {c_lower(family.fixed_header)}),')
+        if family.fixed_header:
+            cw.p(f'.hdr_len\t= sizeof(struct {c_lower(family.fixed_header)}),')
     elif family.fixed_header:
         cw.p(f'.hdr_len\t= sizeof(struct genlmsghdr) + sizeof(struct {c_lower(family.fixed_header)}),')
     else:
Signature · 1 line
2.49.0
maintainer Reviewed-by on v2 12/12
#25 lore raw

Re: [PATCH net-next v2 12/12] tools: ynl: allow fixed-header to be specified per op

Quoted 8 lines · Jakub Kicinski

rtnetlink has variety of ops with different fixed headers. Detect that op fixed header is not the same as family one, and use sizeof() directly. For reverse parsing we need to pass the fixed header len along the policy (in the socket state).