Skip to contentSkip to conversation

Allow port dt-property on two leadtek dsi displays

PATCH Applied Heiko Stuebner 3 participants 5 messages Apr 30, 2025 – May 3, 2025

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Allow port dt-property on two leadtek dsi displays

Working on an upcoming board dts, I noticed a dtc check warning about the port node and at the same time the kernel-test-robot noticed the same warning with a overlay I added recently.

So allow the port node in the binding of two leadtek displays to fix that.

Heiko Stuebner (2):
dt-bindings: display: ltk050h3146w: add port property
dt-bindings: display: ltk500hd1829: add port property

 .../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml  | 1 +
 .../devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml  | 1 +
 2 files changed, 2 insertions(+)
Signature · 1 line
2.47.2
#1 lore raw

PATCH 1/2 dt-bindings: display: ltk050h3146w: add port property

From: Heiko Stuebner <[email protected]>

The panel can be connected to via graph nodes, so allow the port property.

This fixes dtc checker warnings like:

Quoted 1 line
Quoted 1 line

arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+'

from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']

---
 .../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml  | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml +1 -0
index e2a2dd4ef5fa..5fcea62fd58f 100644
@@ -23,6 +23,7 @@ properties:
     maxItems: 1
 
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
Signature · 1 line
2.47.2
#2 lore raw

PATCH 2/2 dt-bindings: display: ltk500hd1829: add port property

In reply to Heiko Stuebner

From: Heiko Stuebner <[email protected]>

The panel can be connected to via graph nodes, so allow the port property.

---
 .../devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml  | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml +1 -0
index af9e0ea0e72f..b0e2c82232d3 100644
@@ -22,6 +22,7 @@ properties:
     maxItems: 1
 
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
Signature · 1 line
2.47.2
Acked-by on the v1 series
#3 lore raw
In reply to Heiko Stuebner
Quoted 6 lines · Heiko Stuebner

Working on an upcoming board dts, I noticed a dtc check warning about the port node and at the same time the kernel-test-robot noticed the same warning with a overlay I added recently.

So allow the port node in the binding of two leadtek displays to fix that.

#4 lore raw
In reply to Heiko Stuebner
Quoted 8 lines · Heiko Stuebner

Working on an upcoming board dts, I noticed a dtc check warning about the port node and at the same time the kernel-test-robot noticed the same warning with a overlay I added recently.

So allow the port node in the binding of two leadtek displays to fix that.

[...]

Applied, thanks!

[1/2] dt-bindings: display: ltk050h3146w: add port property

      commit: bf0636f4348e098e2338eebbe42d7780c58a1195
[2/2] dt-bindings: display: ltk500hd1829: add port property
      commit: e782ac936941cff4c5580bb5cc2ec0e91468068c

Best regards,

Signature · 1 line
Dmitry Baryshkov <[email protected]>