Skip to content

Allow port dt-property on two leadtek dsi displays

Heiko Stuebner dri-devel linux-devicetree lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: display: ltk050h3146w: add port propertyDocumentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml+1 -00 replies
2/2dt-bindings: display: ltk500hd1829: add port propertyDocumentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml+1 -00 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchConor Dooley
SeriesA-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] Allow port dt-property on two leadtek dsi displays

Working on an upcoming board dts, I noticed a dtc check warning about the port node and at the same time the kernel-test-robot noticed the same warning with a overlay I added recently.

So allow the port node in the binding of two leadtek displays to fix that.

Heiko Stuebner (2):
dt-bindings: display: ltk050h3146w: add port property
dt-bindings: display: ltk500hd1829: add port property

 .../devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml  | 1 +
 .../devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml  | 1 +
 2 files changed, 2 insertions(+)
Signature · 1 line
2.47.2