Skip to contentSkip to conversation

perf probe: Extend the quiet option

PATCH RESEND In review Aaron Tomlin 2 participants 3 messages May 4, 2025 – Jun 22, 2025 perf events

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/1 perf probe: Extend the quiet option

To provide a consistent and complete quiet mode, this patch expands the scope of the [-q|--quiet] option to suppress all informational messages, including those indicating successful event creation, in addition to the currently suppressed warnings and messages. For example:

    ❯ sudo ./perf probe --quiet --add proc_sys_open
    ❯ echo $?
    0
---
 tools/perf/builtin-probe.c    | 16 +++++++++++-----
 tools/perf/util/probe-event.h |  1 +
 2 files changed, 12 insertions(+), 5 deletions(-)
tools/perf/builtin-probe.c +11 -5
index 69800e4d9530..aee756aad19d 100644
@@ -391,7 +391,7 @@ static int perf_add_probe_events(struct perf_probe_event *pevs, int npevs)
 	}
 
 	/* Note that it is possible to skip all events because of blacklist */
-	if (event) {
+	if (event && !probe_conf.quiet) {
 #ifndef HAVE_LIBTRACEEVENT
 		pr_info("\nperf is not linked with libtraceevent, to use the new probe you can use tracefs:\n\n");
 		pr_info("\tcd /sys/kernel/tracing/\n");
@@ -467,8 +467,11 @@ static int perf_del_probe_events(struct strfilter *filter)
 
 	ret = probe_file__get_events(kfd, filter, klist);
 	if (ret == 0) {
-		strlist__for_each_entry(ent, klist)
+		strlist__for_each_entry(ent, klist) {
+			if (probe_conf.quiet)
+				continue;
 			pr_info("Removed event: %s\n", ent->s);
+		}
 
 		ret = probe_file__del_strlist(kfd, klist);
 		if (ret < 0)
@@ -478,8 +481,11 @@ static int perf_del_probe_events(struct strfilter *filter)
 
 	ret2 = probe_file__get_events(ufd, filter, ulist);
 	if (ret2 == 0) {
-		strlist__for_each_entry(ent, ulist)
+		strlist__for_each_entry(ent, ulist) {
+			if (probe_conf.quiet)
+				continue;
 			pr_info("Removed event: %s\n", ent->s);
+		}
 
 		ret2 = probe_file__del_strlist(ufd, ulist);
 		if (ret2 < 0)
@@ -531,7 +537,7 @@ __cmd_probe(int argc, const char **argv)
 	struct option options[] = {
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show parsed arguments, etc)"),
-	OPT_BOOLEAN('q', "quiet", &quiet,
+	OPT_BOOLEAN('q', "quiet", &probe_conf.quiet,
 		    "be quiet (do not show any warnings or messages)"),
 	OPT_CALLBACK_DEFAULT('l', "list", NULL, "[GROUP:]EVENT",
 			     "list up probe events",
@@ -631,7 +637,7 @@ __cmd_probe(int argc, const char **argv)
 	argc = parse_options(argc, argv, options, probe_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
 
-	if (quiet) {
+	if (probe_conf.quiet) {
 		if (verbose != 0) {
 			pr_err("  Error: -v and -q are exclusive.\n");
 			return -EINVAL;
tools/perf/util/probe-event.h +1 -0
index 71905ede0207..55771113791f 100644
@@ -10,6 +10,7 @@ struct nsinfo;
 
 /* Probe related configurations */
 struct probe_conf {
+	bool	quiet;
 	bool	show_ext_vars;
 	bool	show_location_range;
 	bool	force_add;
Signature · 1 line
2.47.1
maintainer
#1 lore raw

Hello,

Sorry for the long delay.

Quoted 8 lines · Aaron Tomlin

To provide a consistent and complete quiet mode, this patch expands the scope of the [-q|--quiet] option to suppress all informational messages, including those indicating successful event creation, in addition to the currently suppressed warnings and messages. For example:

    ❯ sudo ./perf probe --quiet --add proc_sys_open
    ❯ echo $?
    0

I don't think this change is needed. I also see no messages before this change.

Indeed, using -q/--quiet option makes verbose to be -1 which disables any pr_info() messages.

Thanks,
Namhyung

Quoted 79 lines
---
 tools/perf/builtin-probe.c    | 16 +++++++++++-----
 tools/perf/util/probe-event.h |  1 +
 2 files changed, 12 insertions(+), 5 deletions(-)
tools/perf/builtin-probe.c +11 -5
index 69800e4d9530..aee756aad19d 100644
@@ -391,7 +391,7 @@ static int perf_add_probe_events(struct perf_probe_event *pevs, int npevs)
 	}
 
 	/* Note that it is possible to skip all events because of blacklist */
-	if (event) {
+	if (event && !probe_conf.quiet) {
 #ifndef HAVE_LIBTRACEEVENT
 		pr_info("\nperf is not linked with libtraceevent, to use the new probe you can use tracefs:\n\n");
 		pr_info("\tcd /sys/kernel/tracing/\n");
@@ -467,8 +467,11 @@ static int perf_del_probe_events(struct strfilter *filter)
 
 	ret = probe_file__get_events(kfd, filter, klist);
 	if (ret == 0) {
-		strlist__for_each_entry(ent, klist)
+		strlist__for_each_entry(ent, klist) {
+			if (probe_conf.quiet)
+				continue;
 			pr_info("Removed event: %s\n", ent->s);
+		}
 
 		ret = probe_file__del_strlist(kfd, klist);
 		if (ret < 0)
@@ -478,8 +481,11 @@ static int perf_del_probe_events(struct strfilter *filter)
 
 	ret2 = probe_file__get_events(ufd, filter, ulist);
 	if (ret2 == 0) {
-		strlist__for_each_entry(ent, ulist)
+		strlist__for_each_entry(ent, ulist) {
+			if (probe_conf.quiet)
+				continue;
 			pr_info("Removed event: %s\n", ent->s);
+		}
 
 		ret2 = probe_file__del_strlist(ufd, ulist);
 		if (ret2 < 0)
@@ -531,7 +537,7 @@ __cmd_probe(int argc, const char **argv)
 	struct option options[] = {
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show parsed arguments, etc)"),
-	OPT_BOOLEAN('q', "quiet", &quiet,
+	OPT_BOOLEAN('q', "quiet", &probe_conf.quiet,
 		    "be quiet (do not show any warnings or messages)"),
 	OPT_CALLBACK_DEFAULT('l', "list", NULL, "[GROUP:]EVENT",
 			     "list up probe events",
@@ -631,7 +637,7 @@ __cmd_probe(int argc, const char **argv)
 	argc = parse_options(argc, argv, options, probe_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
 
-	if (quiet) {
+	if (probe_conf.quiet) {
 		if (verbose != 0) {
 			pr_err("  Error: -v and -q are exclusive.\n");
 			return -EINVAL;
tools/perf/util/probe-event.h +1 -0
index 71905ede0207..55771113791f 100644
@@ -10,6 +10,7 @@ struct nsinfo;
 
 /* Probe related configurations */
 struct probe_conf {
+	bool	quiet;
 	bool	show_ext_vars;
 	bool	show_location_range;
 	bool	force_add;
Signature · 1 line
2.47.1
#2 lore raw
Quoted 1 line · Namhyung Kim

Hello,

Hi Namhyung,

Quoted 1 line

Sorry for the long delay.

No problem.

Quoted 6 lines · Aaron Tomlin
Quoted 5 lines

To provide a consistent and complete quiet mode, this patch expands the scope of the [-q|--quiet] option to suppress all informational messages, including those indicating successful event creation, in addition to the currently suppressed warnings and messages. For example:

Quoted 6 lines
Quoted 3 lines
    ❯ sudo ./perf probe --quiet --add proc_sys_open
    ❯ echo $?
    0

I don't think this change is needed. I also see no messages before this change.

Fair enough.

Quoted 2 lines

Indeed, using -q/--quiet option makes verbose to be -1 which disables any pr_info() messages.

Understood.

Regards,

Signature · 1 line
Aaron Tomlin