Convert Rockchip CDN DP binding to yaml

index 9d5f5b083e3c..e340b6df7445 100644
@@ -618,7 +618,11 @@ cdn_dp: dp@fec00000 {
 		status = "disabled";
 
 		ports {
-			dp_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp_in: port@0 {
+				reg = <0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 

@@ -632,6 +636,10 @@ dp_in_vopl: endpoint@1 {
 					remote-endpoint = <&vopl_out_dp>;
 				};
 			};
+
+			dp_out: port@1 {
+				reg = <1>;
+			};
 		};
 	};
 

deleted file mode 100644
index 8df7d2e393d6..000000000000
@@ -1,74 +0,0 @@
-Rockchip RK3399 specific extensions to the cdn Display Port
-================================
-
-Required properties:
-- compatible: must be "rockchip,rk3399-cdn-dp"
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "core-clk" "pclk" "spdif" "grf"
-
-- resets : a list of phandle + reset specifier pairs
-- reset-names : string of reset names
-		Required elements: "apb", "core", "dptx", "spdif"
-- power-domains : power-domain property defined with a phandle
-		  to respective power domain.
-- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
-- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: contain a port nodes with endpoint definitions as defined in
-	 Documentation/devicetree/bindings/media/video-interfaces.txt.
-	 contained 2 endpoints, connecting to the output of vop.
-
-- phys: from general PHY binding: the phandle for the PHY device.
-
-- extcon: extcon specifier for the Power Delivery
-
-- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
-
--------------------------------------------------------------------------------
-
-Example:
-	cdn_dp: dp@fec00000 {
-		compatible = "rockchip,rk3399-cdn-dp";
-		reg = <0x0 0xfec00000 0x0 0x100000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
-			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
-		clock-names = "core-clk", "pclk", "spdif", "grf";
-		assigned-clocks = <&cru SCLK_DP_CORE>;
-		assigned-clock-rates = <100000000>;
-		power-domains = <&power RK3399_PD_HDCP>;
-		phys = <&tcphy0_dp>, <&tcphy1_dp>;
-		resets = <&cru SRST_DPTX_SPDIF_REC>;
-		reset-names = "spdif";
-		extcon = <&fusb0>, <&fusb1>;
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#sound-dai-cells = <1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dp_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_dp>;
-				};
-
-				dp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_dp>;
-				};
-			};
-		};
-	};

165 lines not on this page · raw message