Enable/Disable DC balance along with VRR DSB
Subsystems (3)
v6 cover Enable/Disable DC balance along with VRR DSB
Control DC Balance Adjustment bit to accomodate changes along with VRR DSB implementation.
Mitul Golani (9):
drm/i915/display: Add source param for dc balance drm/i915/display: Add VRR DC balance registers drm/i915/vrr: Add DC Balance params to crtc_state drm/i915/vrr: Add state dump for DC Balance params drm/i915/vrr: Add compute config for DC Balance params drm/i915/vrr: Write DC balance params to hw registers drm/i915/vrr: Add function to check if DC Balance Possible drm/i915/display: Add function to configure PIPEDMC_EVT_CTL drm/i915/vrr: Enable DC Balance bit
Ville Syrjälä (8):
drm/i915/vrr: Refactor vmin/vmax stuff drm/i915/display: Add pipe dmc registers and bits for DC Balance drm/i915/vrr: Add functions to read out vmin/vmax stuff drm/i915: Extract vrr_vblank_start()
drm/i915/vrr: Implement vblank evasion with DC balancing drm/i915/dsb: Add pipedmc dc balance enable/disable drm/i915/vrr: Restructure VRR enablement bit drm/i915/vrr: Pause DC Balancing for DSB commits
.../drm/i915/display/intel_crtc_state_dump.c | 8 + drivers/gpu/drm/i915/display/intel_display.c | 24 ++ .../drm/i915/display/intel_display_device.h | 1 + .../drm/i915/display/intel_display_types.h | 7 + drivers/gpu/drm/i915/display/intel_dmc.c | 37 +++ drivers/gpu/drm/i915/display/intel_dmc.h | 6 + drivers/gpu/drm/i915/display/intel_dmc_regs.h | 51 ++++ drivers/gpu/drm/i915/display/intel_dsb.c | 31 ++- drivers/gpu/drm/i915/display/intel_vblank.c | 33 ++- drivers/gpu/drm/i915/display/intel_vrr.c | 239 +++++++++++++++--- drivers/gpu/drm/i915/display/intel_vrr.h | 5 + drivers/gpu/drm/i915/display/intel_vrr_regs.h | 44 ++++ 12 files changed, 446 insertions(+), 40 deletions(-)
Signature · 1 line
2.48.1
PATCH v6 1/17 drm/i915/vrr: Refactor vmin/vmax stuff
From: Ville Syrjälä <[email protected]>
Refactor vmin/vmax functions for better computation.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 41 +++++++++++------------- 1 file changed, 19 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/display/intel_vrr.c +19 -22
@@ -146,37 +146,41 @@ static int intel_vrr_vblank_exit_length(const struct intel_crtc_state *crtc_statreturn crtc_state->vrr.pipeline_full + crtc_state->framestart_delay +1 ; } -int intel_vrr_vmin_vtotal (const struct intel_crtc_state *crtc_state) +static int intel_vrr_vtotal (const struct intel_crtc_state *crtc_state,int vmin_vmax) {struct intel_display *display =to_intel_display (crtc_state); -/* Min vblank actually determined by flipline */ if (DISPLAY_VER (display) >=13 ) -return intel_vrr_vmin_flipline (crtc_state); +return vmin_vmax;else -return intel_vrr_vmin_flipline (crtc_state) + -intel_vrr_real_vblank_delay (crtc_state); +return vmin_vmax +intel_vrr_real_vblank_delay (crtc_state); } -int intel_vrr_vmax_vtotal (const struct intel_crtc_state *crtc_state) +static int intel_vrr_vblank_start (const struct intel_crtc_state *crtc_state, +int vmin_vmax) { -struct intel_display *display =to_intel_display (crtc_state); +return intel_vrr_vtotal (crtc_state, vmin_vmax) - +intel_vrr_vblank_exit_length (crtc_state); +} -if (DISPLAY_VER (display) >=13 ) -return crtc_state->vrr.vmax; -else -return crtc_state->vrr.vmax + -intel_vrr_real_vblank_delay (crtc_state); +int intel_vrr_vmin_vtotal (const struct intel_crtc_state *crtc_state) +{ +return intel_vrr_vtotal (crtc_state,intel_vrr_vmin_flipline (crtc_state)); +} + +int intel_vrr_vmax_vtotal (const struct intel_crtc_state *crtc_state) +{ +return intel_vrr_vtotal (crtc_state, crtc_state->vrr.vmax); }int intel_vrr_vmin_vblank_start (const struct intel_crtc_state *crtc_state) { -return intel_vrr_vmin_vtotal (crtc_state) -intel_vrr_vblank_exit_length (crtc_state); +return intel_vrr_vblank_start (crtc_state,intel_vrr_vmin_flipline (crtc_state)); }int intel_vrr_vmax_vblank_start (const struct intel_crtc_state *crtc_state) { -return intel_vrr_vmax_vtotal (crtc_state) -intel_vrr_vblank_exit_length (crtc_state); +return intel_vrr_vblank_start (crtc_state, crtc_state->vrr.vmax); } static bool
@@ -257,14 +261,7 @@ void intel_vrr_compute_vrr_timings(struct intel_crtc_state *crtc_state)static int intel_vrr_fixed_rr_vtotal (const struct intel_crtc_state *crtc_state) { -struct intel_display *display =to_intel_display (crtc_state); -int crtc_vtotal = crtc_state->hw.adjusted_mode.crtc_vtotal; - -if (DISPLAY_VER (display) >=13 ) -return crtc_vtotal; -else -return crtc_vtotal - -intel_vrr_real_vblank_delay (crtc_state); +return intel_vrr_vtotal (crtc_state, crtc_state->hw.adjusted_mode.crtc_vtotal); } static
Signature · 1 line
2.48.1
PATCH v6 2/17 drm/i915/display: Add source param for dc balance
In reply to Mitul GolaniAdd source param for dc balance enablement further.
--v2:
- Arrange in alphabetic order. (Ankit)
- Update name. (Ankit)
--- drivers/gpu/drm/i915/display/intel_display_device.h | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/display/intel_display_device.h +1 -0
@@ -196,6 +196,7 @@ struct intel_display_platforms { ((__display)->platform.dgfx && DISPLAY_VER(__display) == 14)) && \ HAS_DSC(__display))#define HAS_VRR (__display) (DISPLAY_VER(__display) >= 11) +#define HAS_VRR_DC_BALANCE (__display) (DISPLAY_VER(__display) >= 30)#define INTEL_NUM_PIPES (__display) (hweight8(DISPLAY_RUNTIME_INFO(__display)->pipe_mask))#define OVERLAY_NEEDS_PHYSICAL (__display) (DISPLAY_INFO(__display)->overlay_needs_physical)#define SUPPORTS_TV (__display) (DISPLAY_INFO(__display)->supports_tv)
Signature · 1 line
2.48.1
PATCH v6 3/17 drm/i915/display: Add pipe dmc registers and bits for DC Balance
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Add pipe dmc registers and access bits for DC Balance params configuration and enablement.
--v2:
- Separate register definitions for transcoder and pipe dmc. (Ankit)
- Use MMIO pipe macros instead of transcoder ones. (Ankit)
- Remove dev_priv use. (Jani, Nikula)
--v3:
- Add all register address, from capital alphabet to small. (Ankit)
- Add EVT CTL registers.
- Add co-author tag.
- Add event flag for Triggering DC Balance.
--- drivers/gpu/drm/i915/display/intel_dmc_regs.h | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+)
drivers/gpu/drm/i915/display/intel_dmc_regs.h +51 -0
@@ -394,4 +394,55 @@ enum pipedmc_event_id {#define DMC_WAKELOCK_CTL_REQ REG_BIT(31)#define DMC_WAKELOCK_CTL_ACK REG_BIT(15) +#define _PIPEDMC_DCB_CTL_A 0x5f1a0 +#define _PIPEDMC_DCB_CTL_B 0x5f5a0 +#define PIPEDMC_DCB_CTL (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_CTL_A,\ + _PIPEDMC_DCB_CTL_B) +#define PIPEDMC_ADAPTIVE_DCB_ENABLE REG_BIT(31) + +#define _PIPEDMC_DCB_VBLANK_A 0x5f1bc +#define _PIPEDMC_DCB_VBLANK_B 0x5f5bc +#define PIPEDMC_DCB_VBLANK (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_VBLANK_A,\ + _PIPEDMC_DCB_VBLANK_B) + +#define _PIPEDMC_DCB_SLOPE_A 0x5f1b8 +#define _PIPEDMC_DCB_SLOPE_B 0x5f5b8 +#define PIPEDMC_DCB_SLOPE (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_SLOPE_A,\ + _PIPEDMC_DCB_SLOPE_B) + +#define _PIPEDMC_DCB_GUARDBAND_A 0x5f1b4 +#define _PIPEDMC_DCB_GUARDBAND_B 0x5f5b4 +#define PIPEDMC_DCB_GUARDBAND (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_GUARDBAND_A,\ + _PIPEDMC_DCB_GUARDBAND_B) + +#define _PIPEDMC_DCB_MAX_INCREASE_A 0x5f1ac +#define _PIPEDMC_DCB_MAX_INCREASE_B 0x5f5ac +#define PIPEDMC_DCB_MAX_INCREASE (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_INCREASE_A,\ + _PIPEDMC_DCB_MAX_INCREASE_B) + +#define _PIPEDMC_DCB_MAX_DECREASE_A 0x5f1b0 +#define _PIPEDMC_DCB_MAX_DECREASE_B 0x5f5b0 +#define PIPEDMC_DCB_MAX_DECREASE (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_MAX_DECREASE_A,\ + _PIPEDMC_DCB_MAX_DECREASE_B) + +#define _PIPEDMC_DCB_VMIN_A 0x5f1a4 +#define _PIPEDMC_DCB_VMIN_B 0x5f5a4 +#define PIPEDMC_DCB_VMIN (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_VMIN_A,\ + _PIPEDMC_DCB_VMIN_B) + +#define _PIPEDMC_DCB_VMAX_A 0x5f1a8 +#define _PIPEDMC_DCB_VMAX_B 0x5f5a8 +#define PIPEDMC_DCB_VMAX (pipe) _MMIO_PIPE((pipe), _PIPEDMC_DCB_VMAX_A,\ + _PIPEDMC_DCB_VMAX_B) + +#define _PIPEDMC_DCB_DEBUG_A 0x5f1c0 +#define _PIPEDMC_DCB_DEBUG_B 0x5f5c0 +#define PIPEDMC_DCB_DEBUG (pipe) _MMIO_PIPE(pipe, _PIPEDMC_DCB_DEBUG_A,\ + _PIPEDMC_DCB_DEBUG_B) + +#define _PIPEDMC_EVT_CTL_3_A 0x5f040 +#define _PIPEDMC_EVT_CTL_3_B 0x5f440 +#define PIPEDMC_EVT_CTL_3 (pipe) _MMIO_PIPE(pipe, _PIPEDMC_EVT_CTL_3_A,\ + _PIPEDMC_EVT_CTL_3_B) +#endif /* __INTEL_DMC_REGS_H__ */
Signature · 1 line
2.48.1
PATCH v6 4/17 drm/i915/display: Add VRR DC balance registers
In reply to Mitul GolaniAdd VRR register offsets and bits to access DC Balance configuration.
--v2:
- Separate register definitions. (Ankit)
- Remove usage of dev_priv. (Jani, Nikula)
--v3:
- Convert register address offset, from capital to small. (Ankit)
- Move mask bits near to register offsets. (Ankit)
--v4:
- Use _MMIO_TRANS wherever possible. (Jani)
--- drivers/gpu/drm/i915/display/intel_vrr_regs.h | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr_regs.h +44 -0
@@ -9,6 +9,49 @@#include "intel_display_reg_defs.h" /* VRR registers */ +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A 0x604d4 +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B 0x614d4 +#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \ + _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B) +#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK REG_GENMASK(31, 24) +#define VRR_DCB_ADJ_FLIPLINE_MASK REG_GENMASK(19, 0) +#define VRR_DCB_ADJ_FLIPLINE (flipline) REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \ + (flipline)) + +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A 0x604d8 +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B 0x614d8 +#define TRANS_VRR_DCB_ADJ_VMAX_CFG (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \ + _TRANS_VRR_DCB_ADJ_VMAX_CFG_B) +#define VRR_DCB_ADJ_VMAX_CNT_MASK REG_GENMASK(31, 24) +#define VRR_DCB_ADJ_VMAX_MASK REG_GENMASK(19, 0) +#define VRR_DCB_ADJ_VMAX (vmax) REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax)) + +#define _TRANS_VRR_DCB_FLIPLINE_A 0x60418 +#define _TRANS_VRR_DCB_FLIPLINE_B 0x61418 +#define TRANS_VRR_DCB_FLIPLINE (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_FLIPLINE_A, \ + _TRANS_VRR_DCB_FLIPLINE_B) +#define VRR_DCB_FLIPLINE_MASK REG_GENMASK(19, 0) +#define VRR_DCB_FLIPLINE (flipline) REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \ + (flipline)) + +#define _TRANS_VRR_DCB_VMAX_A 0x60414 +#define _TRANS_VRR_DCB_VMAX_B 0x61414 +#define TRANS_VRR_DCB_VMAX (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_VMAX_A, \ + _TRANS_VRR_DCB_VMAX_B) +#define VRR_DCB_VMAX_MASK REG_GENMASK(19, 0) +#define VRR_DCB_VMAX (vmax) REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax)) + +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A 0x604c0 +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B 0x614c0 +#define TRANS_ADAPTIVE_SYNC_DCB_CTL (trans) _MMIO_TRANS(trans, \ + _TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \ + _TRANS_ADAPTIVE_SYNC_DCB_CTL_B) +#define ADAPTIVE_SYNC_COUNTER_EN REG_BIT(31) +#define _TRANS_VRR_CTL_A 0x60420#define _TRANS_VRR_CTL_B 0x61420#define _TRANS_VRR_CTL_C 0x62420
@@ -20,6 +63,7 @@#define VRR_CTL_PIPELINE_FULL_MASK REG_GENMASK(10, 3)#define VRR_CTL_PIPELINE_FULL (x) REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))#define VRR_CTL_PIPELINE_FULL_OVERRIDE REG_BIT(0) +#define VRR_CTL_DCB_ADJ_ENABLE REG_BIT(28)#define XELPD_VRR_CTL_VRR_GUARDBAND_MASK REG_GENMASK(15, 0)#define XELPD_VRR_CTL_VRR_GUARDBAND (x) REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
Signature · 1 line
2.48.1
Re: [PATCH v6 04/17] drm/i915/display: Add VRR DC balance registers
Quoted 6 lines · Mitul Golani
Add VRR register offsets and bits to access DC Balance configuration.
--v2:
- Separate register definitions. (Ankit)
- Remove usage ofdev_priv. (Jani, Nikula)
Quoted 8 lines
--v3:
- Convert register address offset, from capital to small. (Ankit)
- Move mask bits near to register offsets. (Ankit)--v4:
- Use_MMIO_TRANSwherever possible. (Jani)Signed-off-by Mitul Golani <[email protected]>
Quoted 66 lines
--- drivers/gpu/drm/i915/display/intel_vrr_regs.h | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+)drivers/gpu/drm/i915/display/intel_vrr_regs.h +44
-0@@ -9,6 +9,49 @@#include "intel_display_reg_defs.h" /* VRR registers */ +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A 0x604d4 +#define _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B 0x614d4 +#define TRANS_VRR_DCB_ADJ_FLIPLINE_CFG (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_A, \ + _TRANS_VRR_DCB_ADJ_FLIPLINE_CFG_B) +#define VRR_DCB_ADJ_FLIPLINE_CNT_MASK REG_GENMASK(31, 24) +#define VRR_DCB_ADJ_FLIPLINE_MASK REG_GENMASK(19, 0) +#define VRR_DCB_ADJ_FLIPLINE (flipline) REG_FIELD_PREP(VRR_DCB_ADJ_FLIPLINE_MASK, \ + (flipline)) + +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_A 0x604d8 +#define _TRANS_VRR_DCB_ADJ_VMAX_CFG_B 0x614d8 +#define TRANS_VRR_DCB_ADJ_VMAX_CFG (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_ADJ_VMAX_CFG_A, \ + _TRANS_VRR_DCB_ADJ_VMAX_CFG_B) +#define VRR_DCB_ADJ_VMAX_CNT_MASK REG_GENMASK(31, 24) +#define VRR_DCB_ADJ_VMAX_MASK REG_GENMASK(19, 0) +#define VRR_DCB_ADJ_VMAX (vmax) REG_FIELD_PREP(VRR_DCB_ADJ_VMAX_MASK, (vmax)) + +#define _TRANS_VRR_DCB_FLIPLINE_A 0x60418 +#define _TRANS_VRR_DCB_FLIPLINE_B 0x61418 +#define TRANS_VRR_DCB_FLIPLINE (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_FLIPLINE_A, \ + _TRANS_VRR_DCB_FLIPLINE_B) +#define VRR_DCB_FLIPLINE_MASK REG_GENMASK(19, 0) +#define VRR_DCB_FLIPLINE (flipline) REG_FIELD_PREP(VRR_DCB_FLIPLINE_MASK, \ + (flipline)) + +#define _TRANS_VRR_DCB_VMAX_A 0x60414 +#define _TRANS_VRR_DCB_VMAX_B 0x61414 +#define TRANS_VRR_DCB_VMAX (trans) _MMIO_TRANS(trans, \ + _TRANS_VRR_DCB_VMAX_A, \ + _TRANS_VRR_DCB_VMAX_B) +#define VRR_DCB_VMAX_MASK REG_GENMASK(19, 0) +#define VRR_DCB_VMAX (vmax) REG_FIELD_PREP(VRR_DCB_VMAX_MASK, (vmax)) + +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_A 0x604c0 +#define _TRANS_ADAPTIVE_SYNC_DCB_CTL_B 0x614c0 +#define TRANS_ADAPTIVE_SYNC_DCB_CTL (trans) _MMIO_TRANS(trans, \ + _TRANS_ADAPTIVE_SYNC_DCB_CTL_A, \ + _TRANS_ADAPTIVE_SYNC_DCB_CTL_B) +#define ADAPTIVE_SYNC_COUNTER_EN REG_BIT(31) +#define _TRANS_VRR_CTL_A 0x60420#define _TRANS_VRR_CTL_B 0x61420#define _TRANS_VRR_CTL_C 0x62420@@ -20,6 +63,7 @@#define VRR_CTL_PIPELINE_FULL_MASK REG_GENMASK(10, 3)#define VRR_CTL_PIPELINE_FULL (x) REG_FIELD_PREP(VRR_CTL_PIPELINE_FULL_MASK, (x))#define VRR_CTL_PIPELINE_FULL_OVERRIDE REG_BIT(0) +#define VRR_CTL_DCB_ADJ_ENABLE REG_BIT(28)#define XELPD_VRR_CTL_VRR_GUARDBAND_MASK REG_GENMASK(15, 0)#define XELPD_VRR_CTL_VRR_GUARDBAND (x) REG_FIELD_PREP(XELPD_VRR_CTL_VRR_GUARDBAND_MASK, (x))
PATCH v6 5/17 drm/i915/vrr: Add functions to read out vmin/vmax stuff
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Calculate delayed vblank start position with the help of added vmin/vmax stuff for next frame and final computation.
--v2:
- Correct Author details.
--v3:
- Separate register details from this patch.
--v4:
- Add mask macros.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 50 ++++++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_vrr.h | 5 +++ 2 files changed, 55 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr.c +50 -0
@@ -769,3 +769,53 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)if (crtc_state->vrr.enable) crtc_state->mode_flags |=I915_MODE_FLAG_VRR ; } + +int intel_vrr_dcb_vmin_vblank_start_next (const struct intel_crtc_state *crtc_state) +{ +struct intel_display *display =to_intel_display (crtc_state); +enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +u32 tmp =0 ; + + tmp =intel_de_read (display,TRANS_VRR_DCB_ADJ_FLIPLINE_CFG (cpu_transcoder)); + +if (REG_FIELD_GET (VRR_DCB_ADJ_FLIPLINE_CNT_MASK , tmp) ==0 ) +return -1 ; + +return intel_vrr_vblank_start (crtc_state,VRR_DCB_ADJ_FLIPLINE (tmp) +1 ); +} + +int intel_vrr_dcb_vmax_vblank_start_next (const struct intel_crtc_state *crtc_state) +{ +struct intel_display *display =to_intel_display (crtc_state); +enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +u32 tmp =0 ; + + tmp =intel_de_read (display,TRANS_VRR_DCB_ADJ_VMAX_CFG (cpu_transcoder)); + +if (REG_FIELD_GET (VRR_DCB_ADJ_VMAX_CNT_MASK , tmp) ==0 ) +return -1 ; + +return intel_vrr_vblank_start (crtc_state,VRR_DCB_ADJ_VMAX (tmp) +1 ); +} + +int intel_vrr_dcb_vmin_vblank_start_final (const struct intel_crtc_state *crtc_state) +{ +struct intel_display *display =to_intel_display (crtc_state); +enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +u32 tmp =0 ; + + tmp =intel_de_read (display,TRANS_VRR_DCB_FLIPLINE (cpu_transcoder)); + +return intel_vrr_vblank_start (crtc_state,VRR_DCB_FLIPLINE (tmp) +1 ); +} + +int intel_vrr_dcb_vmax_vblank_start_final (const struct intel_crtc_state *crtc_state) +{ +struct intel_display *display =to_intel_display (crtc_state); +enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +u32 tmp =0 ; + + tmp =intel_de_read (display,TRANS_VRR_DCB_VMAX (cpu_transcoder)); + +return intel_vrr_vblank_start (crtc_state,VRR_DCB_VMAX (tmp) +1 ); +}
drivers/gpu/drm/i915/display/intel_vrr.h +5 -0
@@ -42,4 +42,9 @@ void intel_vrr_transcoder_disable(const struct intel_crtc_state *crtc_state);void intel_vrr_set_fixed_rr_timings (const struct intel_crtc_state *crtc_state);bool intel_vrr_always_use_vrr_tg (struct intel_display *display); +int intel_vrr_dcb_vmin_vblank_start_next (const struct intel_crtc_state *crtc_state); +int intel_vrr_dcb_vmax_vblank_start_next (const struct intel_crtc_state *crtc_state); +int intel_vrr_dcb_vmin_vblank_start_final (const struct intel_crtc_state *crtc_state); +int intel_vrr_dcb_vmax_vblank_start_final (const struct intel_crtc_state *crtc_state); +#endif /* __INTEL_VRR_H__ */
Signature · 1 line
2.48.1
PATCH v6 6/17 drm/i915/vrr: Add DC Balance params to crtc_state
In reply to Mitul GolaniAdd DC Balance params to crtc_state, also add state checker params for related properties.
--v3:
- Seggregate crtc_state params with this patch. (Ankit)
--v4:
- Update commit message and header. (Ankit)
- Add +1 to VMIN and VMAX only when it is non-zero. (Ankit)
--- drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++ .../drm/i915/display/intel_display_types.h | 7 ++++++ drivers/gpu/drm/i915/display/intel_vrr.c | 22 +++++++++++++++++++ 3 files changed, 36 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +7 -0
@@ -5420,6 +5420,13 @@ intel_pipe_config_compare(const struct intel_crtc_state *current_config,PIPE_CONF_CHECK_LLI (cmrr.cmrr_m);PIPE_CONF_CHECK_LLI (cmrr.cmrr_n);PIPE_CONF_CHECK_BOOL (cmrr.enable); +PIPE_CONF_CHECK_I (vrr.dc_balance.vmin); +PIPE_CONF_CHECK_I (vrr.dc_balance.vmax); +PIPE_CONF_CHECK_I (vrr.dc_balance.guardband); +PIPE_CONF_CHECK_I (vrr.dc_balance.slope); +PIPE_CONF_CHECK_I (vrr.dc_balance.max_increase); +PIPE_CONF_CHECK_I (vrr.dc_balance.max_decrease); +PIPE_CONF_CHECK_I (vrr.dc_balance.vblank_target); }if (!fastset ||intel_vrr_always_use_vrr_tg (display)) {
drivers/gpu/drm/i915/display/intel_display_types.h +7 -0
@@ -1312,6 +1312,13 @@ struct intel_crtc_state {u8 pipeline_full;u16 flipline, vmin, vmax, guardband;u32 vsync_end, vsync_start; +struct { +bool enable; +u16 vmin, vmax; +u16 guardband, slope; +u16 max_increase, max_decrease; +u16 vblank_target; + } dc_balance; } vrr;/* Content Match Refresh Rate state */
drivers/gpu/drm/i915/display/intel_vrr.c +22 -0
@@ -10,6 +10,7 @@#include "intel_de.h" #include "intel_display_types.h" #include "intel_dp.h" +#include "intel_dmc_regs.h" #include "intel_vrr.h" #include "intel_vrr_regs.h"
@@ -699,6 +700,8 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state) {struct intel_display *display =to_intel_display (crtc_state);enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +enum pipe pipe = crtc->pipe;u32 trans_vrr_ctl, trans_vrr_vsync;bool vrr_enable;
@@ -761,6 +764,25 @@ void intel_vrr_get_config(struct intel_crtc_state *crtc_state)else crtc_state->vrr.enable = vrr_enable; +if (HAS_VRR_DC_BALANCE (display)) { + crtc_state->vrr.dc_balance.vmin = +intel_de_read (display,PIPEDMC_DCB_VMIN (pipe)) ? +intel_de_read (display,PIPEDMC_DCB_VMIN (pipe)) +1 :0 ; + crtc_state->vrr.dc_balance.vmax = +intel_de_read (display,PIPEDMC_DCB_VMAX (pipe)) ? +intel_de_read (display,PIPEDMC_DCB_VMAX (pipe)) +1 :0 ; + crtc_state->vrr.dc_balance.guardband = +intel_de_read (display,PIPEDMC_DCB_GUARDBAND (pipe)); + crtc_state->vrr.dc_balance.max_increase = +intel_de_read (display,PIPEDMC_DCB_MAX_INCREASE (pipe)); + crtc_state->vrr.dc_balance.max_decrease = +intel_de_read (display,PIPEDMC_DCB_MAX_DECREASE (pipe)); + crtc_state->vrr.dc_balance.slope = +intel_de_read (display,PIPEDMC_DCB_SLOPE (pipe)); + crtc_state->vrr.dc_balance.vblank_target = +intel_de_read (display,PIPEDMC_DCB_VBLANK (pipe)); + } +/* * #TODO: For Both VRR and CMRR the flag I915_MODE_FLAG_VRR is set for mode_flags. * Since CMRR is currently disabled, set this flag for VRR for now.
Signature · 1 line
2.48.1
PATCH v6 7/17 drm/i915/vrr: Add state dump for DC Balance params
In reply to Mitul GolaniAdd state dump for dc balance params to track DC Balance crtc state config.
--- drivers/gpu/drm/i915/display/intel_crtc_state_dump.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/gpu/drm/i915/display/intel_crtc_state_dump.c +8 -0
@@ -304,6 +304,14 @@ void intel_crtc_state_dump(const struct intel_crtc_state *pipe_config,drm_printf (&p,"vrr: vmin vblank: %d, vmax vblank: %d, vmin vtotal: %d, vmax vtotal: %d\n" ,intel_vrr_vmin_vblank_start (pipe_config),intel_vrr_vmax_vblank_start (pipe_config),intel_vrr_vmin_vtotal (pipe_config),intel_vrr_vmax_vtotal (pipe_config)); +drm_printf (&p,"vrr: dc balance: %s, vmin: %d vmax: %d guardband: %d, slope: %d max increase: %d max decrease: %d Vblank target: %d\n" , +str_yes_no (pipe_config->vrr.dc_balance.enable), + pipe_config->vrr.dc_balance.vmin, pipe_config->vrr.dc_balance.vmax, + pipe_config->vrr.dc_balance.guardband, + pipe_config->vrr.dc_balance.slope, + pipe_config->vrr.dc_balance.max_increase, + pipe_config->vrr.dc_balance.max_decrease, + pipe_config->vrr.dc_balance.vblank_target);drm_printf (&p,"requested mode: " DRM_MODE_FMT "\n" ,DRM_MODE_ARG (&pipe_config->hw.mode));
Signature · 1 line
2.48.1
PATCH v6 8/17 drm/i915/vrr: Add compute config for DC Balance params
In reply to Mitul GolaniCompute DC Balance parameters and tunable params based on experiments.
--v2:
- Document tunable params. (Ankit)
--v3:
- Add line spaces to compute config. (Ankit)
- Remove redundancy checks.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 25 ++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr.c +25 -0
@@ -16,6 +16,13 @@#define FIXED_POINT_PRECISION 100#define CMRR_PRECISION_TOLERANCE 10 +/* +* Tunable parameters for DC Balance correction. +* These are captured based on experimentations. +*/ +#define DCB_CORRECTION_SENSITIVITY 30 +#define DCB_CORRECTION_AGGRESSIVENESS 1000 +#define DCB_BLANK_TARGET 50bool intel_vrr_is_capable (struct intel_connector *connector) {
@@ -409,6 +416,24 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, (crtc_state->hw.adjusted_mode.crtc_vtotal - crtc_state->hw.adjusted_mode.vsync_end); } + +if (crtc_state->vrr.dc_balance.enable) { + crtc_state->vrr.dc_balance.vmax = crtc_state->vrr.vmax; + crtc_state->vrr.dc_balance.vmin = crtc_state->vrr.vmin; + crtc_state->vrr.dc_balance.max_increase = + crtc_state->vrr.vmax - crtc_state->vrr.vmin; + crtc_state->vrr.dc_balance.max_decrease = + crtc_state->vrr.vmax - crtc_state->vrr.vmin; + crtc_state->vrr.dc_balance.guardband = +DIV_ROUND_UP (crtc_state->vrr.dc_balance.vmax * +DCB_CORRECTION_SENSITIVITY ,100 ); + crtc_state->vrr.dc_balance.slope = +DIV_ROUND_UP (DCB_CORRECTION_AGGRESSIVENESS *10 , + crtc_state->vrr.dc_balance.guardband); + crtc_state->vrr.dc_balance.vblank_target = +DIV_ROUND_UP ((crtc_state->vrr.vmax - crtc_state->vrr.vmin) * +DCB_BLANK_TARGET ,100 ); + } }void intel_vrr_compute_config_late (struct intel_crtc_state *crtc_state)
Signature · 1 line
2.48.1
PATCH v6 9/17 drm/i915/vrr: Write DC balance params to hw registers
In reply to Mitul GolaniWrite DC Balance parameters to hw registers.
--v2:
- Update commit header.
- Separate crtc_state params from this patch. (Ankit)
--v3:
- Write registers at compute config.
- Update condition for write.
--v4:
- Address issue with state checker.
--v5:
- Initialise some more dc balance register while enabling VRR.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 43 ++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr.c +43 -0
@@ -622,6 +622,8 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state) {struct intel_display *display =to_intel_display (crtc_state);enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +enum pipe pipe = crtc->pipe;if (!crtc_state->vrr.enable)return ;
@@ -648,16 +650,57 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state) VRR_CTL_VRR_ENABLE | trans_vrr_ctl(crtc_state)); } } + +if (crtc_state->vrr.dc_balance.enable) { +intel_de_write (display,TRANS_VRR_DCB_ADJ_VMAX_CFG (cpu_transcoder), +VRR_DCB_ADJ_VMAX (crtc_state->vrr.vmax -1 )); +intel_de_write (display,TRANS_VRR_DCB_VMAX (cpu_transcoder), +VRR_DCB_VMAX (crtc_state->vrr.vmax -1 )); +intel_de_write (display,TRANS_VRR_DCB_ADJ_FLIPLINE_CFG (cpu_transcoder), +VRR_DCB_ADJ_FLIPLINE (crtc_state->vrr.flipline -1 )); +intel_de_write (display,TRANS_VRR_DCB_FLIPLINE (cpu_transcoder), +VRR_DCB_FLIPLINE (crtc_state->vrr.flipline -1 )); +intel_de_write (display,PIPEDMC_DCB_VMIN (pipe), + crtc_state->vrr.dc_balance.vmin -1 ); +intel_de_write (display,PIPEDMC_DCB_VMAX (pipe), + crtc_state->vrr.dc_balance.vmax -1 ); +intel_de_write (display,PIPEDMC_DCB_MAX_INCREASE (pipe), + crtc_state->vrr.dc_balance.max_increase); +intel_de_write (display,PIPEDMC_DCB_MAX_DECREASE (pipe), + crtc_state->vrr.dc_balance.max_decrease); +intel_de_write (display,PIPEDMC_DCB_GUARDBAND (pipe), + crtc_state->vrr.dc_balance.guardband); +intel_de_write (display,PIPEDMC_DCB_SLOPE (pipe), + crtc_state->vrr.dc_balance.slope); +intel_de_write (display,PIPEDMC_DCB_VBLANK (pipe), + crtc_state->vrr.dc_balance.vblank_target); + } }void intel_vrr_disable (const struct intel_crtc_state *old_crtc_state) {struct intel_display *display =to_intel_display (old_crtc_state);enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; +struct intel_crtc *crtc =to_intel_crtc (old_crtc_state->uapi.crtc); +enum pipe pipe = crtc->pipe;if (!old_crtc_state->vrr.enable)return ; +if (old_crtc_state->vrr.dc_balance.enable) { +intel_de_write (display,PIPEDMC_DCB_VMIN (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_VMAX (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_MAX_INCREASE (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_MAX_DECREASE (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_GUARDBAND (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_SLOPE (pipe),0 ); +intel_de_write (display,PIPEDMC_DCB_VBLANK (pipe),0 ); +intel_de_write (display,TRANS_VRR_DCB_ADJ_VMAX_CFG (cpu_transcoder),0 ); +intel_de_write (display,TRANS_VRR_DCB_ADJ_FLIPLINE_CFG (cpu_transcoder),0 ); +intel_de_write (display,TRANS_VRR_DCB_VMAX (cpu_transcoder),0 ); +intel_de_write (display,TRANS_VRR_DCB_FLIPLINE (cpu_transcoder),0 ); + } +if (!intel_vrr_always_use_vrr_tg (display)) {intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder),trans_vrr_ctl (old_crtc_state));
Signature · 1 line
2.48.1
PATCH v6 10/17 drm/i915: Extract vrr_vblank_start()
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Initialise delayed vblank position for evasion logic.
--- drivers/gpu/drm/i915/display/intel_vblank.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_vblank.c +9 -4
@@ -642,6 +642,14 @@ intel_pre_commit_crtc_state(struct intel_atomic_state *state,return pre_commit_crtc_state (old_crtc_state, new_crtc_state); } +static int vrr_vblank_start (const struct intel_crtc_state *crtc_state) +{ +if (intel_vrr_is_push_sent (crtc_state)) +return intel_vrr_vmin_vblank_start (crtc_state); +else +return intel_vrr_vmax_vblank_start (crtc_state); +} +void intel_vblank_evade_init (const struct intel_crtc_state *old_crtc_state,const struct intel_crtc_state *new_crtc_state,struct intel_vblank_evade_ctx *evade)
@@ -668,10 +676,7 @@ void intel_vblank_evade_init(const struct intel_crtc_state *old_crtc_state,drm_WARN_ON (crtc->base.dev,intel_crtc_needs_modeset (new_crtc_state) || new_crtc_state->update_m_n || new_crtc_state->update_lrr); -if (intel_vrr_is_push_sent (crtc_state)) - evade->vblank_start =intel_vrr_vmin_vblank_start (crtc_state); -else - evade->vblank_start =intel_vrr_vmax_vblank_start (crtc_state); + evade->vblank_start =vrr_vblank_start (crtc_state); vblank_delay =intel_vrr_vblank_delay (crtc_state); }else {
Signature · 1 line
2.48.1
PATCH v6 11/17 drm/i915/vrr: Implement vblank evasion with DC balancing
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Add vblank evasion logic when vrr is already enabled along with dc balance is computed.
--- drivers/gpu/drm/i915/display/intel_dsb.c | 31 ++++++++++++++++++++- drivers/gpu/drm/i915/display/intel_vblank.c | 26 +++++++++++++++-- 2 files changed, 53 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/display/intel_dsb.c +30 -1
@@ -700,7 +700,36 @@ void intel_dsb_vblank_evade(struct intel_atomic_state *state,if (crtc_state->has_psr)intel_dsb_emit_wait_dsl (dsb,DSB_OPCODE_WAIT_DSL_OUT ,0 ,0 ); -if (pre_commit_is_vrr_active (state, crtc)) { +if (pre_commit_is_vrr_active (state, crtc) && crtc_state->vrr.dc_balance.enable) { +int vblank_delay =intel_vrr_vblank_delay (crtc_state); +int vmin_vblank_start, vmax_vblank_start; + + vmin_vblank_start =intel_vrr_dcb_vmin_vblank_start_next (crtc_state); + +if (vmin_vblank_start >=0 ) { + end = vmin_vblank_start; + start = end - vblank_delay - latency; +intel_dsb_wait_scanline_out (state, dsb, start, end); + } + + vmax_vblank_start =intel_vrr_dcb_vmax_vblank_start_next (crtc_state); + +if (vmax_vblank_start >=0 ) { + end = vmax_vblank_start; + start = end - vblank_delay - latency; +intel_dsb_wait_scanline_out (state, dsb, start, end); + } + + vmin_vblank_start =intel_vrr_dcb_vmin_vblank_start_final (crtc_state); + end = vmin_vblank_start; + start = end - vblank_delay - latency; +intel_dsb_wait_scanline_out (state, dsb, start, end); + + vmax_vblank_start =intel_vrr_dcb_vmax_vblank_start_final (crtc_state); + end = vmax_vblank_start; + start = end - vblank_delay - latency; +intel_dsb_wait_scanline_out (state, dsb, start, end); + }else if (pre_commit_is_vrr_active (state, crtc)) {int vblank_delay =intel_vrr_vblank_delay (crtc_state); end =intel_vrr_vmin_vblank_start (crtc_state);
drivers/gpu/drm/i915/display/intel_vblank.c +23 -3
@@ -644,10 +644,30 @@ intel_pre_commit_crtc_state(struct intel_atomic_state *state,static int vrr_vblank_start (const struct intel_crtc_state *crtc_state) { -if (intel_vrr_is_push_sent (crtc_state)) -return intel_vrr_vmin_vblank_start (crtc_state); +bool is_push_sent =intel_vrr_is_push_sent (crtc_state); +int vblank_start; + +if (!crtc_state->vrr.dc_balance.enable) { +if (is_push_sent) +return intel_vrr_vmin_vblank_start (crtc_state); +else +return intel_vrr_vmax_vblank_start (crtc_state); + } + +if (is_push_sent) + vblank_start =intel_vrr_dcb_vmin_vblank_start_next (crtc_state);else -return intel_vrr_vmax_vblank_start (crtc_state); + vblank_start =intel_vrr_dcb_vmax_vblank_start_next (crtc_state); + +if (vblank_start >=0 ) +return vblank_start; + +if (is_push_sent) + vblank_start =intel_vrr_dcb_vmin_vblank_start_final (crtc_state); +else + vblank_start =intel_vrr_dcb_vmax_vblank_start_final (crtc_state); + +return vblank_start; } void intel_vblank_evade_init(const struct intel_crtc_state *old_crtc_state,
Signature · 1 line
2.48.1
PATCH v6 12/17 drm/i915/dsb: Add pipedmc dc balance enable/disable
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Add function to control DC balance enable/disable bit via DSB.
--- drivers/gpu/drm/i915/display/intel_dmc.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/display/intel_dmc.h | 4 ++++ 2 files changed, 21 insertions(+)
drivers/gpu/drm/i915/display/intel_dmc.c +17 -0
@@ -1478,3 +1478,20 @@ void intel_pipedmc_irq_handler(struct intel_display *display, enum pipe pipe)drm_err (display->drm,"[CRTC:%d:%s]] PIPEDMC interrupt vector 0x%x\n" , crtc->base.base.id, crtc->base.name, tmp); } + +void intel_pipedmc_dcb_enable (struct intel_dsb *dsb,struct intel_crtc *crtc) +{ +struct intel_display *display =to_intel_display (crtc); +enum pipe pipe = crtc->pipe; + +intel_de_write_dsb (display, dsb,PIPEDMC_DCB_CTL (pipe), +PIPEDMC_ADAPTIVE_DCB_ENABLE ); +} + +void intel_pipedmc_dcb_disable (struct intel_dsb *dsb,struct intel_crtc *crtc) +{ +struct intel_display *display =to_intel_display (crtc); +enum pipe pipe = crtc->pipe; + +intel_de_write_dsb (display, dsb,PIPEDMC_DCB_CTL (pipe),0 ); +}
drivers/gpu/drm/i915/display/intel_dmc.h +4 -0
@@ -9,9 +9,11 @@#include <linux/types.h> enum pipe ; +struct intel_crtc ;struct drm_printer ;struct intel_display ;struct intel_dmc_snapshot ; +struct intel_dsb ;void intel_dmc_init (struct intel_display *display);void intel_dmc_load_program (struct intel_display *display);
@@ -35,5 +37,7 @@ void intel_dmc_update_dc6_allowed_count(struct intel_display *display, bool starvoid assert_dmc_loaded (struct intel_display *display);void intel_pipedmc_irq_handler (struct intel_display *display,enum pipe pipe); +void intel_pipedmc_dcb_enable (struct intel_dsb *dsb,struct intel_crtc *crtc); +void intel_pipedmc_dcb_disable (struct intel_dsb *dsb,struct intel_crtc *crtc);#endif /* __INTEL_DMC_H__ */
Signature · 1 line
2.48.1
PATCH v6 13/17 drm/i915/vrr: Restructure VRR enablement bit
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Restructure bits for VRR enablement.
--v2:
- Separate multiple enablement from one patch.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 29 ++++++++++++------------ 1 file changed, 14 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_vrr.c +14 -15
@@ -624,6 +624,7 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc);enum pipe pipe = crtc->pipe; +u32 ctl;if (!crtc_state->vrr.enable)return ;
@@ -638,19 +639,6 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)intel_de_write (display,TRANS_PUSH (display, cpu_transcoder),TRANS_PUSH_EN ); -if (!intel_vrr_always_use_vrr_tg (display)) { -intel_vrr_set_db_point_and_transmission_line (crtc_state); - -if (crtc_state->cmrr.enable) { -intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), -VRR_CTL_VRR_ENABLE |VRR_CTL_CMRR_ENABLE | -trans_vrr_ctl (crtc_state)); - }else { -intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), -VRR_CTL_VRR_ENABLE |trans_vrr_ctl (crtc_state)); - } - } -if (crtc_state->vrr.dc_balance.enable) {intel_de_write (display,TRANS_VRR_DCB_ADJ_VMAX_CFG (cpu_transcoder),VRR_DCB_ADJ_VMAX (crtc_state->vrr.vmax -1 ));
@@ -675,6 +663,12 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)intel_de_write (display,PIPEDMC_DCB_VBLANK (pipe), crtc_state->vrr.dc_balance.vblank_target); } + + ctl =VRR_CTL_VRR_ENABLE |trans_vrr_ctl (crtc_state); +if (crtc_state->cmrr.enable) + ctl |=VRR_CTL_CMRR_ENABLE ; + +intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl); }void intel_vrr_disable (const struct intel_crtc_state *old_crtc_state)
@@ -683,10 +677,17 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;struct intel_crtc *crtc =to_intel_crtc (old_crtc_state->uapi.crtc);enum pipe pipe = crtc->pipe; +u32 ctl;if (!old_crtc_state->vrr.enable)return ; + ctl =trans_vrr_ctl (old_crtc_state); +if (intel_vrr_always_use_vrr_tg (display)) + ctl |=VRR_CTL_VRR_ENABLE ; + +intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl); +if (old_crtc_state->vrr.dc_balance.enable) {intel_de_write (display,PIPEDMC_DCB_VMIN (pipe),0 );intel_de_write (display,PIPEDMC_DCB_VMAX (pipe),0 );
@@ -702,8 +703,6 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state) }if (!intel_vrr_always_use_vrr_tg (display)) { -intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), -trans_vrr_ctl (old_crtc_state));intel_de_wait_for_clear (display,TRANS_VRR_STATUS (display, cpu_transcoder),VRR_STATUS_VRR_EN_LIVE ,1000 );
Signature · 1 line
2.48.1
PATCH v6 14/17 drm/i915/vrr: Pause DC Balancing for DSB commits
In reply to Mitul GolaniFrom: Ville Syrjälä <[email protected]>
Pause the DMC DC Balancing for the remainder of the commit so that vmin/vmax won't change after we've baked them into the DSB vblank evasion commands.
--v2:
- Remove typo. (Ankit)
- Separate vrr enable structuring. (Ankit)
--v3:
- Add gaurd before accessing DC balance bits.
- Remove redundancy checks.
--- drivers/gpu/drm/i915/display/intel_display.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/display/intel_vrr.c | 7 +++++++ 2 files changed, 24 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +17 -0
@@ -7222,6 +7222,21 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state, }if (new_crtc_state->use_dsb) { +if (new_crtc_state->vrr.dc_balance.enable) { +/* +* Pause the DMC DC balancing for the remainder of +* the commit so that vmin/vmax won't change after +* we've baked them into the DSB vblank evasion +* commands. +* +* FIXME maybe need a small delay here to make sure +* DMC has finished updating the values? Or we need +* a better DMC<->driver protocol that gives is real +* guarantees about that... +*/ +intel_pipedmc_dcb_disable (NULL , crtc); + } +if (intel_crtc_needs_color_update (new_crtc_state))intel_color_commit_noarm (new_crtc_state->dsb_commit, new_crtc_state);
@@ -7267,6 +7282,8 @@ static void intel_atomic_dsb_finish(struct intel_atomic_state *state,intel_dsb_wait_vblank_delay (state, new_crtc_state->dsb_commit);intel_vrr_check_push_sent (new_crtc_state->dsb_commit, new_crtc_state); +if (new_crtc_state->vrr.dc_balance.enable) +intel_pipedmc_dcb_enable (new_crtc_state->dsb_commit, crtc);intel_dsb_interrupt (new_crtc_state->dsb_commit); }
drivers/gpu/drm/i915/display/intel_vrr.c +7 -0
@@ -9,6 +9,7 @@#include "i915_reg.h" #include "intel_de.h" #include "intel_display_types.h" +#include "intel_dmc.h" #include "intel_dp.h" #include "intel_dmc_regs.h" #include "intel_vrr.h"
@@ -669,6 +670,9 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state) ctl |=VRR_CTL_CMRR_ENABLE ;intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl); + +if (crtc_state->vrr.dc_balance.enable) +intel_pipedmc_dcb_enable (NULL , crtc); }void intel_vrr_disable (const struct intel_crtc_state *old_crtc_state)
@@ -682,6 +686,9 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)if (!old_crtc_state->vrr.enable)return ; +if (old_crtc_state->vrr.dc_balance.enable) +intel_pipedmc_dcb_disable (NULL , crtc); + ctl =trans_vrr_ctl (old_crtc_state);if (intel_vrr_always_use_vrr_tg (display)) ctl |=VRR_CTL_VRR_ENABLE ;
Signature · 1 line
2.48.1
PATCH v6 15/17 drm/i915/vrr: Add function to check if DC Balance Possible
In reply to Mitul GolaniAdd function to check if DC Balance possibile on requested PIPE and also validate along with DISPLAY_VER check.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr.c +16 -0
@@ -256,6 +256,22 @@ void intel_vrr_compute_cmrr_timings(struct intel_crtc_state *crtc_state) crtc_state->mode_flags |=I915_MODE_FLAG_VRR ; } +static +int intel_vrr_dc_balance_possible (const struct intel_crtc_state *crtc_state) +{ +struct intel_display *display =to_intel_display (crtc_state); +struct intel_crtc *crtc =to_intel_crtc (crtc_state->uapi.crtc); +enum pipe pipe = crtc->pipe; + +/* +* FIXME: Currently Firmware supports DC Balancing on PIPE A +* and PIPE B. Account those limitation while computing DC +* Balance parameters. +*/ +return (HAS_VRR_DC_BALANCE (display) && + ((pipe ==PIPE_A ) || (pipe ==PIPE_B ))); +} +static void intel_vrr_compute_vrr_timings (struct intel_crtc_state *crtc_state) {
Signature · 1 line
2.48.1
PATCH v6 16/17 drm/i915/display: Add function to configure PIPEDMC_EVT_CTL
In reply to Mitul GolaniConfigure PIPEDMC_EVT_CTL_3 register with required event flags.
--- drivers/gpu/drm/i915/display/intel_dmc.c | 20 ++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dmc.h | 2 ++ drivers/gpu/drm/i915/display/intel_vrr.c | 8 ++++++-- 3 files changed, 28 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_dmc.c +20 -0
@@ -618,6 +618,26 @@ void intel_dmc_block_pkgc(struct intel_display *display, enum pipe pipe, PIPEDMC_BLOCK_PKGC_SW_BLOCK_PKGC_ALWAYS : 0); } +void intel_dmc_configure_dc_balance_ctl_regs (struct intel_display *display, +enum pipe pipe,bool enable) +{ +u32 val; + +if (enable) + val =DMC_EVT_CTL_ENABLE |DMC_EVT_CTL_RECURRING | +REG_FIELD_PREP (DMC_EVT_CTL_TYPE_MASK , +DMC_EVT_CTL_TYPE_EDGE_0_1 ) | +REG_FIELD_PREP (DMC_EVT_CTL_EVENT_ID_MASK , +PIPEDMC_EVENT_ADAPTIVE_DCB_TRIGGER ); +else + val =REG_FIELD_PREP (DMC_EVT_CTL_EVENT_ID_MASK , +DMC_EVENT_FALSE ) | +REG_FIELD_PREP (DMC_EVT_CTL_TYPE_MASK , +DMC_EVT_CTL_TYPE_EDGE_0_1 ); + +intel_de_write (display,PIPEDMC_EVT_CTL_3 (pipe), val); +} +/** * intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank() - start of PKG * C-state exit
drivers/gpu/drm/i915/display/intel_dmc.h +2 -0
@@ -22,6 +22,8 @@ void intel_dmc_enable_pipe(struct intel_display *display, enum pipe pipe);void intel_dmc_disable_pipe (struct intel_display *display,enum pipe pipe);void intel_dmc_block_pkgc (struct intel_display *display,enum pipe pipe,bool block); +void intel_dmc_configure_dc_balance_ctl_regs (struct intel_display *display, +enum pipe pipe,bool enable);void intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank (struct intel_display *display,enum pipe pipe,bool enable);void intel_dmc_fini (struct intel_display *display);
drivers/gpu/drm/i915/display/intel_vrr.c +6 -2
@@ -687,8 +687,10 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl); -if (crtc_state->vrr.dc_balance.enable) +if (crtc_state->vrr.dc_balance.enable) { +intel_dmc_configure_dc_balance_ctl_regs (display, pipe, true);intel_pipedmc_dcb_enable (NULL , crtc); + } }void intel_vrr_disable (const struct intel_crtc_state *old_crtc_state)
@@ -702,8 +704,10 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)if (!old_crtc_state->vrr.enable)return ; -if (old_crtc_state->vrr.dc_balance.enable) +if (old_crtc_state->vrr.dc_balance.enable) {intel_pipedmc_dcb_disable (NULL , crtc); +intel_dmc_configure_dc_balance_ctl_regs (display, pipe, false); + } ctl =trans_vrr_ctl (old_crtc_state);if (intel_vrr_always_use_vrr_tg (display))
Signature · 1 line
2.48.1
Re: [PATCH v6 16/17] drm/i915/display: Add function to configure PIPEDMC_EVT_CTL
Quoted 23 lines · Mitul Golani
Configure
PIPEDMC_EVT_CTL_3register with required event flags.Signed-off-by Mitul Golani <[email protected]>--- drivers/gpu/drm/i915/display/intel_dmc.c | 20 ++++++++++++++++++++ drivers/gpu/drm/i915/display/intel_dmc.h | 2 ++ drivers/gpu/drm/i915/display/intel_vrr.c | 8 ++++++-- 3 files changed, 28 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_dmc.c +6
-0@@ -618,6 +618,26 @@ void intel_dmc_block_pkgc(struct intel_display *display, enum pipe pipe, PIPEDMC_BLOCK_PKGC_SW_BLOCK_PKGC_ALWAYS : 0); } +void intel_dmc_configure_dc_balance_ctl_regs (struct intel_display *display, +enum pipe pipe,bool enable) +{ +u32 val; + +if (enable)
drivers/gpu/drm/i915/display/intel_dmc.c void intel_dmc_block_pkgc(struct intel_display *display, enum pipe pipe, · line 636
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dmc.c +10
-0+ val =DMC_EVT_CTL_ENABLE |DMC_EVT_CTL_RECURRING | +REG_FIELD_PREP (DMC_EVT_CTL_TYPE_MASK , +DMC_EVT_CTL_TYPE_EDGE_0_1 ) | +REG_FIELD_PREP (DMC_EVT_CTL_EVENT_ID_MASK , +PIPEDMC_EVENT_ADAPTIVE_DCB_TRIGGER ); + else + val =REG_FIELD_PREP (DMC_EVT_CTL_EVENT_ID_MASK , +DMC_EVENT_FALSE ) | +REG_FIELD_PREP (DMC_EVT_CTL_TYPE_MASK , +DMC_EVT_CTL_TYPE_EDGE_0_1 );
Do we need to set bit DMC_EVT_CTL_TYPE_EDGE_0_1 for both enable/disable case.
If we do then perhaps val can be initialized with this value.
Regards,
Ankit
Quoted 48 lines
drivers/gpu/drm/i915/display/intel_dmc.c +4
-0+ +intel_de_write (display,PIPEDMC_EVT_CTL_3 (pipe), val); +} +/** * intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank() - start of PKG * C-state exit drivers/gpu/drm/i915/display/intel_dmc.h +2
-0@@ -22,6 +22,8 @@ void intel_dmc_enable_pipe(struct intel_display *display, enum pipe pipe);void intel_dmc_disable_pipe (struct intel_display *display,enum pipe pipe);void intel_dmc_block_pkgc (struct intel_display *display,enum pipe pipe,bool block); +void intel_dmc_configure_dc_balance_ctl_regs (struct intel_display *display, +enum pipe pipe,bool enable);void intel_dmc_start_pkgc_exit_at_start_of_undelayed_vblank (struct intel_display *display,enum pipe pipe,bool enable);void intel_dmc_fini (struct intel_display *display);drivers/gpu/drm/i915/display/intel_vrr.c +6
-2@@ -687,8 +687,10 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl); -if (crtc_state->vrr.dc_balance.enable) +if (crtc_state->vrr.dc_balance.enable) { +intel_dmc_configure_dc_balance_ctl_regs (display, pipe, true);intel_pipedmc_dcb_enable (NULL , crtc); + } }void intel_vrr_disable (const struct intel_crtc_state *old_crtc_state)@@ -702,8 +704,10 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)if (!old_crtc_state->vrr.enable)return ; -if (old_crtc_state->vrr.dc_balance.enable) +if (old_crtc_state->vrr.dc_balance.enable) {intel_pipedmc_dcb_disable (NULL , crtc); +intel_dmc_configure_dc_balance_ctl_regs (display, pipe, false); + } ctl =trans_vrr_ctl (old_crtc_state);if (intel_vrr_always_use_vrr_tg (display))
PATCH v6 17/17 drm/i915/vrr: Enable DC Balance bit
In reply to Mitul GolaniEnable DC Balance from vrr compute config and also add enable/disable frame counters for DC Balance odd and even frame count calculation.
--v2:
Update commit message
--v3:
- Driver should not control adjustment enable bit, as that is already being controlled by firmware. Release bit from driver computation.
- Commit message update.
--v4:
- Configure PIPEDMC_EVT_CTL enable/disable call.
--- drivers/gpu/drm/i915/display/intel_vrr.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/i915/display/intel_vrr.c +6 -0
@@ -277,6 +277,9 @@ void intel_vrr_compute_vrr_timings(struct intel_crtc_state *crtc_state) { crtc_state->vrr.enable = true; crtc_state->mode_flags |=I915_MODE_FLAG_VRR ; + +if (intel_vrr_dc_balance_possible (crtc_state)) + crtc_state->vrr.dc_balance.enable = true; }/*
@@ -688,6 +691,8 @@ void intel_vrr_enable(const struct intel_crtc_state *crtc_state)intel_de_write (display,TRANS_VRR_CTL (display, cpu_transcoder), ctl);if (crtc_state->vrr.dc_balance.enable) { +intel_de_write (display,TRANS_ADAPTIVE_SYNC_DCB_CTL (cpu_transcoder), +ADAPTIVE_SYNC_COUNTER_EN );intel_dmc_configure_dc_balance_ctl_regs (display, pipe, true);intel_pipedmc_dcb_enable (NULL , crtc); }
@@ -707,6 +712,7 @@ void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)if (old_crtc_state->vrr.dc_balance.enable) {intel_pipedmc_dcb_disable (NULL , crtc);intel_dmc_configure_dc_balance_ctl_regs (display, pipe, false); +intel_de_write (display,TRANS_ADAPTIVE_SYNC_DCB_CTL (cpu_transcoder),0 ); } ctl =trans_vrr_ctl (old_crtc_state);
Signature · 1 line
2.48.1
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Enable/Disable DC balance along with VRR DSB (rev6)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev6)
URL : https://patchwork.freedesktop.org/series/147799/
State : warning
== Summary ==
Error: dim checkpatch failed7205544f3a4d drm/i915/vrr: Refactor vmin/vmax stuff114313681d31 drm/i915/display: Add source param for dc balance 4cd5f566e378 drm/i915/display: Add pipe dmc registers and bits for DC Balance -:25: WARNING:BAD_SIGN_OFF: Non-standard signature: Co-authored-by:
#25:
total: 0 errors, 1 warnings, 0 checks, 55 lines checked b6f672b87053 drm/i915/display: Add VRR DC balance registers 959b752bae29 drm/i915/vrr: Add functions to read out vmin/vmax stuff 5dfcfb74b2ac drm/i915/vrr: Add DC Balance params to crtc_state 25ce655c9295 drm/i915/vrr: Add state dump for DC Balance params 527a1f73fa04 drm/i915/vrr: Add compute config for DC Balance params 6191be2a22e3 drm/i915/vrr: Write DC balance params to hw registers ae2e280d0b64 drm/i915: Extract vrr_vblank_start() c394fb479187 drm/i915/vrr: Implement vblank evasion with DC balancing c8e476e6f358 drm/i915/dsb: Add pipedmc dc balance enable/disable f087e41d8bff drm/i915/vrr: Restructure VRR enablement bit 93ed5e5b5fcb drm/i915/vrr: Pause DC Balancing for DSB commits db5ddb9ee23d drm/i915/vrr: Add function to check if DC Balance Possible 4eac36cb73ed drm/i915/display: Add function to configure PIPEDMC_EVT_CTL 4d412c0f198b drm/i915/vrr: Enable DC Balance bit
Patchwork
CI✗ Fi.CI.SPARSE: warning for Enable/Disable DC balance along with VRR DSB (rev6)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev6)
URL : https://patchwork.freedesktop.org/series/147799/
State : warning
== Summary ==
6,321 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Patchwork
CI✓ CI.Patch_applied: success for Enable/Disable DC balance along with VRR DSB (rev7)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev7)
URL : https://patchwork.freedesktop.org/series/148025/
State : success
== Summary ==
=== Applying kernel patches on branch 'drm-tip' with base: ===
Base commit: ba486e3b10ce drm-tip: 2025y-06m-03d-16h-48m-17s UTC integration manifest === git am output follows ===
Applying: drm/i915/vrr: Refactor vmin/vmax stuff
Applying: drm/i915/display: Add source param for dc balance
Applying: drm/i915/display: Add pipe dmc registers and bits for DC Balance
Applying: drm/i915/display: Add VRR DC balance registers
Applying: drm/i915/vrr: Add functions to read out vmin/vmax stuff
Applying: drm/i915/vrr: Add DC Balance params to crtc_state
Applying: drm/i915/vrr: Add state dump for DC Balance params
Applying: drm/i915/vrr: Add compute config for DC Balance params
Applying: drm/i915/vrr: Write DC balance params to hw registers
Applying: drm/i915: Extract vrr_vblank_start()
Applying: drm/i915/vrr: Implement vblank evasion with DC balancing
Applying: drm/i915/dsb: Add pipedmc dc balance enable/disable
Applying: drm/i915/vrr: Restructure VRR enablement bit
Applying: drm/i915/vrr: Pause DC Balancing for DSB commits
Applying: drm/i915/vrr: Add function to check if DC Balance Possible
Applying: drm/i915/display: Add function to configure PIPEDMC_EVT_CTL
Applying: drm/i915/vrr: Enable DC Balance bit
✗ CI.checkpatch: warning for Enable/Disable DC balance along with VRR DSB (rev7)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev7)
URL : https://patchwork.freedesktop.org/series/148025/
State : warning
== Summary ==
+ KERNEL=/kernel
+ git clone https://gitlab.freedesktop.org/drm/maintainer-tools mt Cloning into 'mt'...
warning: redirecting to https://gitlab.freedesktop.org/drm/maintainer-tools.git/
+ git -C mt rev-list -n1 origin/master 202708c00696422fd217223bb679a353a5936e23
+ cd /kernel
+ git config --global --add safe.directory /kernel
+ git log -n1
commit c248f804b440b59182382ed6d82022c16f1dfeae
Author: Mitul Golani <[email protected]> Date: Wed Jun 4 01:05:22 2025 +0530
drm/i915/vrr: Enable DC Balance bit
Enable DC Balance from vrr compute config and also add enable/disable frame counters for DC Balance odd and even frame count calculation.
--v2:
Update commit message
--v3:
- Driver should not control adjustment enable bit, as that is already being controlled by firmware. Release bit from driver computation.
- Commit message update.
--v4:
- Configure PIPEDMC_EVT_CTL enable/disable call.
+ /mt/dim checkpatch ba486e3b10ce5b4ee4d1ffc58aa4cc3b669c02a3 drm-intel 621d3b87f86b drm/i915/vrr: Refactor vmin/vmax stuff5ab10dfdefc9 drm/i915/display: Add source param for dc balance 2c2a6d9a50da drm/i915/display: Add pipe dmc registers and bits for DC Balance -:25: WARNING:BAD_SIGN_OFF: Non-standard signature: Co-authored-by:
#25:
total: 0 errors, 1 warnings, 0 checks, 55 lines checked d9746b6acd08 drm/i915/display: Add VRR DC balance registers 7b821210dde4 drm/i915/vrr: Add functions to read out vmin/vmax stuff 2711afe1dd73 drm/i915/vrr: Add DC Balance params to crtc_state bbcede0d0c1d drm/i915/vrr: Add state dump for DC Balance params a974ee45c70f drm/i915/vrr: Add compute config for DC Balance params edb37dc13ce6 drm/i915/vrr: Write DC balance params to hw registers f20482e412c2 drm/i915: Extract vrr_vblank_start() 2f904f51f13a drm/i915/vrr: Implement vblank evasion with DC balancing 7c62a84d5685 drm/i915/dsb: Add pipedmc dc balance enable/disable 1c97467166ca drm/i915/vrr: Restructure VRR enablement bit 0a47431dd407 drm/i915/vrr: Pause DC Balancing for DSB commits c737d60f425b drm/i915/vrr: Add function to check if DC Balance Possible 299c3970f19d drm/i915/display: Add function to configure PIPEDMC_EVT_CTL c248f804b440 drm/i915/vrr: Enable DC Balance bit
Patchwork
CI✗ CI.KUnit: failure for Enable/Disable DC balance along with VRR DSB (rev7)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev7)
URL : https://patchwork.freedesktop.org/series/148025/
State : failure
== Summary ==
+ trap cleanup EXIT
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/xe/.kunitconfig [20:04:26] Configuring KUnit Kernel ...
Generating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig [20:04:30] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48 [20:04:56] Starting KUnit Kernel (1/1)... [20:04:56] ============================================================ Running tests with: $ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [20:04:57] ================== guc_buf (11 subtests) =================== [20:04:57] [PASSED] test_smallest [20:04:57] [PASSED] test_largest [20:04:57] [PASSED] test_granular [20:04:57] [PASSED] test_unique [20:04:57] [PASSED] test_overlap [20:04:57] [PASSED] test_reusable [20:04:57] [PASSED] test_too_big [20:04:57] [PASSED] test_flush [20:04:57] [PASSED] test_lookup [20:04:57] [PASSED] test_data [20:04:57] [PASSED] test_class [20:04:57] ===================== [PASSED] guc_buf ===================== [20:04:57] =================== guc_dbm (7 subtests) =================== [20:04:57] [PASSED] test_empty [20:04:57] [PASSED] test_default [20:04:57] ======================== test_size ======================== [20:04:57] [PASSED] 4 [20:04:57] [PASSED] 8 [20:04:57] [PASSED] 32 [20:04:57] [PASSED] 256 [20:04:57] ==================== [PASSED] test_size ==================== [20:04:57] ======================= test_reuse ======================== [20:04:57] [PASSED] 4 [20:04:57] [PASSED] 8 [20:04:57] [PASSED] 32 [20:04:57] [PASSED] 256 [20:04:57] =================== [PASSED] test_reuse ==================== [20:04:57] =================== test_range_overlap ==================== [20:04:57] [PASSED] 4 [20:04:57] [PASSED] 8 [20:04:57] [PASSED] 32 [20:04:57] [PASSED] 256 [20:04:57] =============== [PASSED] test_range_overlap ================ [20:04:57] =================== test_range_compact ==================== [20:04:57] [PASSED] 4 [20:04:57] [PASSED] 8 [20:04:57] [PASSED] 32 [20:04:57] [PASSED] 256 [20:04:57] =============== [PASSED] test_range_compact ================ [20:04:57] ==================== test_range_spare ===================== [20:04:57] [PASSED] 4 [20:04:57] [PASSED] 8 [20:04:57] [PASSED] 32 [20:04:57] [PASSED] 256 [20:04:57] ================ [PASSED] test_range_spare ================= [20:04:57] ===================== [PASSED] guc_dbm ===================== [20:04:57] =================== guc_idm (6 subtests) =================== [20:04:57] [PASSED] bad_init [20:04:57] [PASSED] no_init [20:04:57] [PASSED] init_fini [20:04:57] [PASSED] check_used [20:04:57] [PASSED] check_quota [20:04:57] [PASSED] check_all [20:04:57] ===================== [PASSED] guc_idm ===================== [20:04:57] ================== no_relay (3 subtests) =================== [20:04:57] [PASSED] xe_drops_guc2pf_if_not_ready [20:04:57] [PASSED] xe_drops_guc2vf_if_not_ready [20:04:57] [PASSED] xe_rejects_send_if_not_ready [20:04:57] ==================== [PASSED] no_relay ===================== [20:04:57] ================== pf_relay (14 subtests) ================== [20:04:57] [PASSED] pf_rejects_guc2pf_too_short [20:04:57] [PASSED] pf_rejects_guc2pf_too_long [20:04:57] [PASSED] pf_rejects_guc2pf_no_payload [20:04:57] [PASSED] pf_fails_no_payload [20:04:57] [PASSED] pf_fails_bad_origin [20:04:57] [PASSED] pf_fails_bad_type [20:04:57] [PASSED] pf_txn_reports_error [20:04:57] [PASSED] pf_txn_sends_pf2guc [20:04:57] [PASSED] pf_sends_pf2guc [20:04:57] [SKIPPED] pf_loopback_nop [20:04:57] [SKIPPED] pf_loopback_echo [20:04:57] [SKIPPED] pf_loopback_fail [20:04:57] [SKIPPED] pf_loopback_busy [20:04:57] [SKIPPED] pf_loopback_retry [20:04:57] ==================== [PASSED] pf_relay ===================== [20:04:57] ================== vf_relay (3 subtests) =================== [20:04:57] [PASSED] vf_rejects_guc2vf_too_short [20:04:57] [PASSED] vf_rejects_guc2vf_too_long [20:04:57] [PASSED] vf_rejects_guc2vf_no_payload [20:04:57] ==================== [PASSED] vf_relay ===================== [20:04:57] ================= pf_service (11 subtests) ================= [20:04:57] [PASSED] pf_negotiate_any [20:04:57] [PASSED] pf_negotiate_base_match [20:04:57] [PASSED] pf_negotiate_base_newer [20:04:57] [PASSED] pf_negotiate_base_next [20:04:57] [SKIPPED] pf_negotiate_base_older [20:04:57] [PASSED] pf_negotiate_base_prev [20:04:57] [PASSED] pf_negotiate_latest_match [20:04:57] [PASSED] pf_negotiate_latest_newer [20:04:57] [PASSED] pf_negotiate_latest_next [20:04:57] [SKIPPED] pf_negotiate_latest_older [20:04:57] [SKIPPED] pf_negotiate_latest_prev [20:04:57] =================== [PASSED] pf_service ==================== [20:04:57] ===================== lmtt (1 subtest) ===================== [20:04:57] ======================== test_ops ========================= [20:04:57] [PASSED] 2-level [20:04:57] [PASSED] multi-level [20:04:57] ==================== [PASSED] test_ops ===================== [20:04:57] ====================== [PASSED] lmtt ======================= [20:04:57] =================== xe_mocs (2 subtests) =================== [20:04:57] ================ xe_live_mocs_kernel_kunit ================ [20:04:57] =========== [SKIPPED] xe_live_mocs_kernel_kunit ============ [20:04:57] ================ xe_live_mocs_reset_kunit ================= [20:04:57] ============ [SKIPPED] xe_live_mocs_reset_kunit ============ [20:04:57] ==================== [SKIPPED] xe_mocs ===================== [20:04:57] ================= xe_migrate (2 subtests) ================== [20:04:57] ================= xe_migrate_sanity_kunit ================= [20:04:57] ============ [SKIPPED] xe_migrate_sanity_kunit ============= [20:04:57] ================== xe_validate_ccs_kunit ================== [20:04:57] ============= [SKIPPED] xe_validate_ccs_kunit ============== [20:04:57] =================== [SKIPPED] xe_migrate =================== [20:04:57] ================== xe_dma_buf (1 subtest) ================== [20:04:57] ==================== xe_dma_buf_kunit ===================== [20:04:57] ================ [SKIPPED] xe_dma_buf_kunit ================ [20:04:57] =================== [SKIPPED] xe_dma_buf =================== [20:04:57] ================= xe_bo_shrink (1 subtest) ================= [20:04:57] =================== xe_bo_shrink_kunit ==================== [20:04:57] =============== [SKIPPED] xe_bo_shrink_kunit =============== [20:04:57] ================== [SKIPPED] xe_bo_shrink ================== [20:04:57] ==================== xe_bo (2 subtests) ==================== [20:04:57] ================== xe_ccs_migrate_kunit =================== [20:04:57] ============== [SKIPPED] xe_ccs_migrate_kunit ============== [20:04:57] ==================== xe_bo_evict_kunit ==================== [20:04:57] =============== [SKIPPED] xe_bo_evict_kunit ================ [20:04:57] ===================== [SKIPPED] xe_bo ====================== [20:04:57] ==================== args (11 subtests) ==================== [20:04:57] [PASSED] count_args_test [20:04:57] [PASSED] call_args_example [20:04:57] [PASSED] call_args_test [20:04:57] [PASSED] drop_first_arg_example [20:04:57] [PASSED] drop_first_arg_test [20:04:57] [PASSED] first_arg_example [20:04:57] [PASSED] first_arg_test [20:04:57] [PASSED] last_arg_example [20:04:57] [PASSED] last_arg_test [20:04:57] [PASSED] pick_arg_example [20:04:57] [PASSED] sep_comma_example [20:04:57] ====================== [PASSED] args ======================= [20:04:57] =================== xe_pci (2 subtests) ==================== [20:04:57] [PASSED] xe_gmdid_graphics_ip [20:04:57] [PASSED] xe_gmdid_media_ip [20:04:57] ===================== [PASSED] xe_pci ====================== [20:04:57] =================== xe_rtp (2 subtests) ==================== [20:04:57] =============== xe_rtp_process_to_sr_tests ================ [20:04:57] [PASSED] coalesce-same-reg [20:04:57] [PASSED] no-match-no-add [20:04:57] [PASSED] match-or [20:04:57] [PASSED] match-or-xfail [20:04:57] [PASSED] no-match-no-add-multiple-rules [20:04:57] [PASSED] two-regs-two-entries [20:04:57] [PASSED] clr-one-set-other [20:04:57] [PASSED] set-field [20:04:57] [PASSED] conflict-duplicate [20:04:57] [PASSED] conflict-not-disjoint stty: 'standard input': Inappropriate ioctl for device [20:04:57] [PASSED] conflict-reg-type [20:04:57] =========== [PASSED] xe_rtp_process_to_sr_tests ============ [20:04:57] ================== xe_rtp_process_tests =================== [20:04:57] [PASSED] active1 [20:04:57] [PASSED] active2 [20:04:57] [PASSED] active-inactive [20:04:57] [PASSED] inactive-active [20:04:57] [PASSED] inactive-1st_or_active-inactive [20:04:57] [PASSED] inactive-2nd_or_active-inactive [20:04:57] [PASSED] inactive-last_or_active-inactive [20:04:57] [PASSED] inactive-no_or_active-inactive [20:04:57] ============== [PASSED] xe_rtp_process_tests =============== [20:04:57] ===================== [PASSED] xe_rtp ====================== [20:04:57] ==================== xe_wa (1 subtest) ===================== [20:04:57] ======================== xe_wa_gt ========================= [20:04:57] [PASSED] TIGERLAKE (B0) [20:04:57] [PASSED] DG1 (A0) [20:04:57] [PASSED] DG1 (B0) [20:04:57] [PASSED] ALDERLAKE_S (A0) [20:04:57] [PASSED] ALDERLAKE_S (B0) [20:04:57] [PASSED] ALDERLAKE_S (C0) [20:04:57] [PASSED] ALDERLAKE_S (D0) [20:04:57] [PASSED] ALDERLAKE_P (A0) [20:04:57] [PASSED] ALDERLAKE_P (B0) [20:04:57] [PASSED] ALDERLAKE_P (C0) [20:04:57] [PASSED] ALDERLAKE_S_RPLS (D0) [20:04:57] [PASSED] ALDERLAKE_P_RPLU (E0) [20:04:57] [PASSED] DG2_G10 (C0) [20:04:57] [PASSED] DG2_G11 (B1) [20:04:57] [PASSED] DG2_G12 (A1) [20:04:57] [PASSED] METEORLAKE (g:A0, m:A0) [20:04:57] [PASSED] METEORLAKE (g:A0, m:A0) [20:04:57] [PASSED] METEORLAKE (g:A0, m:A0) [20:04:57] [PASSED] LUNARLAKE (g:A0, m:A0) [20:04:57] [PASSED] LUNARLAKE (g:B0, m:A0) [20:04:57] [PASSED] BATTLEMAGE (g:A0, m:A1) [20:04:57] ==================== [PASSED] xe_wa_gt ===================== [20:04:57] ====================== [PASSED] xe_wa ====================== [20:04:57] ============================================================ [20:04:57] Testing complete. Ran 133 tests: passed: 117, skipped: 16 [20:04:57] Elapsed time: 31.152s total, 4.193s configuring, 26.593s building, 0.314s running
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/tests/.kunitconfig [20:04:57] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig [20:04:59] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48 [20:05:20] Starting KUnit Kernel (1/1)... [20:05:20] ============================================================ Running tests with: $ .kunit/linux kunit.enable=1 mem=1G console=tty kunit_shutdown=halt [20:05:20] == drm_test_atomic_get_connector_for_encoder (1 subtest) === [20:05:20] [PASSED] drm_test_drm_atomic_get_connector_for_encoder [20:05:20] ==== [PASSED] drm_test_atomic_get_connector_for_encoder ==== [20:05:20] =========== drm_validate_clone_mode (2 subtests) =========== [20:05:20] ============== drm_test_check_in_clone_mode =============== [20:05:20] [PASSED] in_clone_mode [20:05:20] [PASSED] not_in_clone_mode [20:05:20] ========== [PASSED] drm_test_check_in_clone_mode =========== [20:05:20] =============== drm_test_check_valid_clones =============== [20:05:20] [PASSED] not_in_clone_mode [20:05:20] [PASSED] valid_clone [20:05:20] [PASSED] invalid_clone [20:05:20] =========== [PASSED] drm_test_check_valid_clones =========== [20:05:20] ============= [PASSED] drm_validate_clone_mode ============= [20:05:20] ============= drm_validate_modeset (1 subtest) ============= [20:05:20] [PASSED] drm_test_check_connector_changed_modeset [20:05:20] ============== [PASSED] drm_validate_modeset =============== [20:05:20] ====== drm_test_bridge_get_current_state (2 subtests) ====== [20:05:20] [PASSED] drm_test_drm_bridge_get_current_state_atomic [20:05:20] [PASSED] drm_test_drm_bridge_get_current_state_legacy [20:05:20] ======== [PASSED] drm_test_bridge_get_current_state ======== [20:05:20] ====== drm_test_bridge_helper_reset_crtc (3 subtests) ====== [20:05:20] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic [20:05:20] [PASSED] drm_test_drm_bridge_helper_reset_crtc_atomic_disabled [20:05:20] [PASSED] drm_test_drm_bridge_helper_reset_crtc_legacy [20:05:20] ======== [PASSED] drm_test_bridge_helper_reset_crtc ======== [20:05:20] ================== drm_buddy (7 subtests) ================== [20:05:20] [PASSED] drm_test_buddy_alloc_limit [20:05:20] [PASSED] drm_test_buddy_alloc_optimistic [20:05:20] [PASSED] drm_test_buddy_alloc_pessimistic [20:05:20] [PASSED] drm_test_buddy_alloc_pathological [20:05:20] [PASSED] drm_test_buddy_alloc_contiguous [20:05:20] [PASSED] drm_test_buddy_alloc_clear [20:05:20] [PASSED] drm_test_buddy_alloc_range_bias [20:05:20] ==================== [PASSED] drm_buddy ==================== [20:05:20] ============= drm_cmdline_parser (40 subtests) ============= [20:05:20] [PASSED] drm_test_cmdline_force_d_only [20:05:20] [PASSED] drm_test_cmdline_force_D_only_dvi [20:05:20] [PASSED] drm_test_cmdline_force_D_only_hdmi [20:05:20] [PASSED] drm_test_cmdline_force_D_only_not_digital [20:05:20] [PASSED] drm_test_cmdline_force_e_only [20:05:20] [PASSED] drm_test_cmdline_res [20:05:20] [PASSED] drm_test_cmdline_res_vesa [20:05:20] [PASSED] drm_test_cmdline_res_vesa_rblank [20:05:20] [PASSED] drm_test_cmdline_res_rblank [20:05:20] [PASSED] drm_test_cmdline_res_bpp [20:05:20] [PASSED] drm_test_cmdline_res_refresh [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_margins [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_force_off [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_analog [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_force_on_digital [20:05:20] [PASSED] drm_test_cmdline_res_bpp_refresh_interlaced_margins_force_on [20:05:20] [PASSED] drm_test_cmdline_res_margins_force_on [20:05:20] [PASSED] drm_test_cmdline_res_vesa_margins [20:05:20] [PASSED] drm_test_cmdline_name [20:05:20] [PASSED] drm_test_cmdline_name_bpp [20:05:20] [PASSED] drm_test_cmdline_name_option [20:05:20] [PASSED] drm_test_cmdline_name_bpp_option [20:05:20] [PASSED] drm_test_cmdline_rotate_0 [20:05:20] [PASSED] drm_test_cmdline_rotate_90 [20:05:20] [PASSED] drm_test_cmdline_rotate_180 [20:05:20] [PASSED] drm_test_cmdline_rotate_270 [20:05:20] [PASSED] drm_test_cmdline_hmirror [20:05:20] [PASSED] drm_test_cmdline_vmirror [20:05:20] [PASSED] drm_test_cmdline_margin_options [20:05:20] [PASSED] drm_test_cmdline_multiple_options [20:05:20] [PASSED] drm_test_cmdline_bpp_extra_and_option [20:05:20] [PASSED] drm_test_cmdline_extra_and_option [20:05:20] [PASSED] drm_test_cmdline_freestanding_options [20:05:20] [PASSED] drm_test_cmdline_freestanding_force_e_and_options [20:05:20] [PASSED] drm_test_cmdline_panel_orientation [20:05:20] ================ drm_test_cmdline_invalid ================= [20:05:20] [PASSED] margin_only [20:05:20] [PASSED] interlace_only [20:05:20] [PASSED] res_missing_x [20:05:20] [PASSED] res_missing_y [20:05:20] [PASSED] res_bad_y [20:05:20] [PASSED] res_missing_y_bpp [20:05:20] [PASSED] res_bad_bpp [20:05:20] [PASSED] res_bad_refresh [20:05:20] [PASSED] res_bpp_refresh_force_on_off [20:05:20] [PASSED] res_invalid_mode [20:05:20] [PASSED] res_bpp_wrong_place_mode [20:05:20] [PASSED] name_bpp_refresh [20:05:20] [PASSED] name_refresh [20:05:20] [PASSED] name_refresh_wrong_mode [20:05:20] [PASSED] name_refresh_invalid_mode [20:05:20] [PASSED] rotate_multiple [20:05:20] [PASSED] rotate_invalid_val [20:05:20] [PASSED] rotate_truncated [20:05:20] [PASSED] invalid_option [20:05:20] [PASSED] invalid_tv_option [20:05:20] [PASSED] truncated_tv_option [20:05:20] ============ [PASSED] drm_test_cmdline_invalid ============= [20:05:20] =============== drm_test_cmdline_tv_options =============== [20:05:20] [PASSED] NTSC [20:05:20] [PASSED] NTSC_443 [20:05:20] [PASSED] NTSC_J [20:05:20] [PASSED] PAL [20:05:20] [PASSED] PAL_M [20:05:20] [PASSED] PAL_N [20:05:20] [PASSED] SECAM [20:05:20] [PASSED] MONO_525 [20:05:20] [PASSED] MONO_625 [20:05:20] =========== [PASSED] drm_test_cmdline_tv_options =========== [20:05:20] =============== [PASSED] drm_cmdline_parser ================ [20:05:20] ========== drmm_connector_hdmi_init (20 subtests) ========== [20:05:20] [PASSED] drm_test_connector_hdmi_init_valid [20:05:20] [PASSED] drm_test_connector_hdmi_init_bpc_8 [20:05:20] [PASSED] drm_test_connector_hdmi_init_bpc_10 [20:05:20] [PASSED] drm_test_connector_hdmi_init_bpc_12 [20:05:20] [PASSED] drm_test_connector_hdmi_init_bpc_invalid [20:05:20] [PASSED] drm_test_connector_hdmi_init_bpc_null [20:05:20] [PASSED] drm_test_connector_hdmi_init_formats_empty [20:05:20] [PASSED] drm_test_connector_hdmi_init_formats_no_rgb [20:05:20] === drm_test_connector_hdmi_init_formats_yuv420_allowed === [20:05:20] [PASSED] supported_formats=0x9 yuv420_allowed=1 [20:05:20] [PASSED] supported_formats=0x9 yuv420_allowed=0 [20:05:20] [PASSED] supported_formats=0x3 yuv420_allowed=1 [20:05:20] [PASSED] supported_formats=0x3 yuv420_allowed=0 [20:05:20] === [PASSED] drm_test_connector_hdmi_init_formats_yuv420_allowed === [20:05:20] [PASSED] drm_test_connector_hdmi_init_null_ddc [20:05:20] [PASSED] drm_test_connector_hdmi_init_null_product [20:05:20] [PASSED] drm_test_connector_hdmi_init_null_vendor [20:05:20] [PASSED] drm_test_connector_hdmi_init_product_length_exact [20:05:20] [PASSED] drm_test_connector_hdmi_init_product_length_too_long [20:05:20] [PASSED] drm_test_connector_hdmi_init_product_valid [20:05:20] [PASSED] drm_test_connector_hdmi_init_vendor_length_exact [20:05:20] [PASSED] drm_test_connector_hdmi_init_vendor_length_too_long [20:05:20] [PASSED] drm_test_connector_hdmi_init_vendor_valid [20:05:20] ========= drm_test_connector_hdmi_init_type_valid ========= [20:05:20] [PASSED] HDMI-A [20:05:20] [PASSED] HDMI-B [20:05:20] ===== [PASSED] drm_test_connector_hdmi_init_type_valid ===== [20:05:20] ======== drm_test_connector_hdmi_init_type_invalid ======== [20:05:20] [PASSED] Unknown [20:05:20] [PASSED] VGA [20:05:20] [PASSED] DVI-I [20:05:20] [PASSED] DVI-D [20:05:20] [PASSED] DVI-A [20:05:20] [PASSED] Composite [20:05:20] [PASSED] SVIDEO [20:05:20] [PASSED] LVDS [20:05:20] [PASSED] Component [20:05:20] [PASSED] DIN [20:05:20] [PASSED] DP [20:05:20] [PASSED] TV [20:05:20] [PASSED] eDP [20:05:20] [PASSED] Virtual [20:05:20] [PASSED] DSI [20:05:20] [PASSED] DPI [20:05:20] [PASSED] Writeback [20:05:20] [PASSED] SPI [20:05:20] [PASSED] USB [20:05:20] ==== [PASSED] drm_test_connector_hdmi_init_type_invalid ==== [20:05:20] ============ [PASSED] drmm_connector_hdmi_init ============= [20:05:20] ============= drmm_connector_init (3 subtests) ============= [20:05:20] [PASSED] drm_test_drmm_connector_init [20:05:20] [PASSED] drm_test_drmm_connector_init_null_ddc [20:05:20] ========= drm_test_drmm_connector_init_type_valid ========= [20:05:20] [PASSED] Unknown [20:05:20] [PASSED] VGA [20:05:20] [PASSED] DVI-I [20:05:20] [PASSED] DVI-D [20:05:20] [PASSED] DVI-A [20:05:20] [PASSED] Composite [20:05:20] [PASSED] SVIDEO [20:05:20] [PASSED] LVDS [20:05:20] [PASSED] Component [20:05:20] [PASSED] DIN [20:05:20] [PASSED] DP [20:05:20] [PASSED] HDMI-A [20:05:20] [PASSED] HDMI-B [20:05:20] [PASSED] TV [20:05:20] [PASSED] eDP [20:05:20] [PASSED] Virtual [20:05:20] [PASSED] DSI [20:05:20] [PASSED] DPI [20:05:20] [PASSED] Writeback [20:05:20] [PASSED] SPI [20:05:20] [PASSED] USB [20:05:20] ===== [PASSED] drm_test_drmm_connector_init_type_valid ===== [20:05:20] =============== [PASSED] drmm_connector_init =============== [20:05:20] ========= drm_connector_dynamic_init (6 subtests) ========== [20:05:20] [PASSED] drm_test_drm_connector_dynamic_init [20:05:20] [PASSED] drm_test_drm_connector_dynamic_init_null_ddc [20:05:20] [PASSED] drm_test_drm_connector_dynamic_init_not_added [20:05:20] [PASSED] drm_test_drm_connector_dynamic_init_properties [20:05:20] ===== drm_test_drm_connector_dynamic_init_type_valid ====== [20:05:20] [PASSED] Unknown [20:05:20] [PASSED] VGA [20:05:20] [PASSED] DVI-I [20:05:20] [PASSED] DVI-D [20:05:20] [PASSED] DVI-A [20:05:20] [PASSED] Composite [20:05:20] [PASSED] SVIDEO [20:05:20] [PASSED] LVDS [20:05:20] [PASSED] Component [20:05:20] [PASSED] DIN [20:05:20] [PASSED] DP [20:05:20] [PASSED] HDMI-A [20:05:20] [PASSED] HDMI-B [20:05:20] [PASSED] TV [20:05:20] [PASSED] eDP [20:05:20] [PASSED] Virtual [20:05:20] [PASSED] DSI [20:05:20] [PASSED] DPI [20:05:20] [PASSED] Writeback [20:05:20] [PASSED] SPI [20:05:20] [PASSED] USB [20:05:20] = [PASSED] drm_test_drm_connector_dynamic_init_type_valid == [20:05:20] ======== drm_test_drm_connector_dynamic_init_name ========= [20:05:20] [PASSED] Unknown [20:05:20] [PASSED] VGA [20:05:20] [PASSED] DVI-I [20:05:20] [PASSED] DVI-D [20:05:20] [PASSED] DVI-A [20:05:20] [PASSED] Composite [20:05:20] [PASSED] SVIDEO [20:05:20] [PASSED] LVDS [20:05:20] [PASSED] Component [20:05:20] [PASSED] DIN [20:05:20] [PASSED] DP [20:05:20] [PASSED] HDMI-A [20:05:20] [PASSED] HDMI-B [20:05:20] [PASSED] TV [20:05:20] [PASSED] eDP [20:05:20] [PASSED] Virtual [20:05:20] [PASSED] DSI [20:05:20] [PASSED] DPI [20:05:20] [PASSED] Writeback [20:05:20] [PASSED] SPI [20:05:20] [PASSED] USB [20:05:20] ==== [PASSED] drm_test_drm_connector_dynamic_init_name ===== [20:05:20] =========== [PASSED] drm_connector_dynamic_init ============ [20:05:20] ==== drm_connector_dynamic_register_early (4 subtests) ===== [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_early_on_list [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_early_defer [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_early_no_init [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_early_no_mode_object [20:05:20] ====== [PASSED] drm_connector_dynamic_register_early ======= [20:05:20] ======= drm_connector_dynamic_register (7 subtests) ======== [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_on_list [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_no_defer [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_no_init [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_mode_object [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_sysfs [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_sysfs_name [20:05:20] [PASSED] drm_test_drm_connector_dynamic_register_debugfs [20:05:20] ========= [PASSED] drm_connector_dynamic_register ========== [20:05:20] = drm_connector_attach_broadcast_rgb_property (2 subtests) = [20:05:20] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property [20:05:20] [PASSED] drm_test_drm_connector_attach_broadcast_rgb_property_hdmi_connector [20:05:20] === [PASSED] drm_connector_attach_broadcast_rgb_property === [20:05:20] ========== drm_get_tv_mode_from_name (2 subtests) ========== [20:05:20] ========== drm_test_get_tv_mode_from_name_valid =========== [20:05:20] [PASSED] NTSC [20:05:20] [PASSED] NTSC-443 [20:05:20] [PASSED] NTSC-J [20:05:20] [PASSED] PAL [20:05:20] [PASSED] PAL-M [20:05:20] [PASSED] PAL-N [20:05:20] [PASSED] SECAM [20:05:20] [PASSED] Mono [20:05:20] ====== [PASSED] drm_test_get_tv_mode_from_name_valid ======= [20:05:20] [PASSED] drm_test_get_tv_mode_from_name_truncated [20:05:20] ============ [PASSED] drm_get_tv_mode_from_name ============ [20:05:20] = drm_test_connector_hdmi_compute_mode_clock (12 subtests) = [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_10bpc_vic_1 [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_12bpc_vic_1 [20:05:20] [PASSED] drm_test_drm_hdmi_compute_mode_clock_rgb_double [20:05:20] = drm_test_connector_hdmi_compute_mode_clock_yuv420_valid = [20:05:20] [PASSED] VIC 96 [20:05:20] [PASSED] VIC 97 [20:05:20] [PASSED] VIC 101 [20:05:20] [PASSED] VIC 102 [20:05:20] [PASSED] VIC 106 [20:05:20] [PASSED] VIC 107 [20:05:20] === [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_valid === [20:05:20] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_10_bpc [20:05:20] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv420_12_bpc [20:05:20] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_8_bpc [20:05:20] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_10_bpc [20:05:20] [PASSED] drm_test_connector_hdmi_compute_mode_clock_yuv422_12_bpc [20:05:20] === [PASSED] drm_test_connector_hdmi_compute_mode_clock ==== [20:05:20] == drm_hdmi_connector_get_broadcast_rgb_name (2 subtests) == [20:05:20] === drm_test_drm_hdmi_connector_get_broadcast_rgb_name ==== [20:05:20] [PASSED] Automatic [20:05:20] [PASSED] Full [20:05:20] [PASSED] Limited 16:235 [20:05:20] === [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name === [20:05:20] [PASSED] drm_test_drm_hdmi_connector_get_broadcast_rgb_name_invalid [20:05:20] ==== [PASSED] drm_hdmi_connector_get_broadcast_rgb_name ==== [20:05:20] == drm_hdmi_connector_get_output_format_name (2 subtests) == [20:05:20] === drm_test_drm_hdmi_connector_get_output_format_name ==== [20:05:20] [PASSED] RGB [20:05:20] [PASSED] YUV 4:2:0 [20:05:20] [PASSED] YUV 4:2:2 [20:05:20] [PASSED] YUV 4:4:4 [20:05:20] === [PASSED] drm_test_drm_hdmi_connector_get_output_format_name === [20:05:20] [PASSED] drm_test_drm_hdmi_connector_get_output_format_name_invalid [20:05:20] ==== [PASSED] drm_hdmi_connector_get_output_format_name ==== [20:05:20] ============= drm_damage_helper (21 subtests) ============== [20:05:20] [PASSED] drm_test_damage_iter_no_damage [20:05:20] [PASSED] drm_test_damage_iter_no_damage_fractional_src [20:05:20] [PASSED] drm_test_damage_iter_no_damage_src_moved [20:05:20] [PASSED] drm_test_damage_iter_no_damage_fractional_src_moved [20:05:20] [PASSED] drm_test_damage_iter_no_damage_not_visible [20:05:20] [PASSED] drm_test_damage_iter_no_damage_no_crtc [20:05:20] [PASSED] drm_test_damage_iter_no_damage_no_fb [20:05:20] [PASSED] drm_test_damage_iter_simple_damage [20:05:20] [PASSED] drm_test_damage_iter_single_damage [20:05:20] [PASSED] drm_test_damage_iter_single_damage_intersect_src [20:05:20] [PASSED] drm_test_damage_iter_single_damage_outside_src [20:05:20] [PASSED] drm_test_damage_iter_single_damage_fractional_src [20:05:20] [PASSED] drm_test_damage_iter_single_damage_intersect_fractional_src [20:05:20] [PASSED] drm_test_damage_iter_single_damage_outside_fractional_src [20:05:20] [PASSED] drm_test_damage_iter_single_damage_src_moved [20:05:20] [PASSED] drm_test_damage_iter_single_damage_fractional_src_moved [20:05:20] [PASSED] drm_test_damage_iter_damage [20:05:20] [PASSED] drm_test_damage_iter_damage_one_intersect [20:05:20] [PASSED] drm_test_damage_iter_damage_one_outside [20:05:20] [PASSED] drm_test_damage_iter_damage_src_moved [20:05:20] [PASSED] drm_test_damage_iter_damage_not_visible [20:05:20] ================ [PASSED] drm_damage_helper ================ [20:05:20] ============== drm_dp_mst_helper (3 subtests) ============== [20:05:20] ============== drm_test_dp_mst_calc_pbn_mode ============== [20:05:20] [PASSED] Clock 154000 BPP 30 DSC disabled [20:05:20] [PASSED] Clock 234000 BPP 30 DSC disabled [20:05:20] [PASSED] Clock 297000 BPP 24 DSC disabled [20:05:20] [PASSED] Clock 332880 BPP 24 DSC enabled [20:05:20] [PASSED] Clock 324540 BPP 24 DSC enabled [20:05:20] ========== [PASSED] drm_test_dp_mst_calc_pbn_mode ========== [20:05:20] ============== drm_test_dp_mst_calc_pbn_div =============== [20:05:20] [PASSED] Link rate 2000000 lane count 4 [20:05:20] [PASSED] Link rate 2000000 lane count 2 [20:05:20] [PASSED] Link rate 2000000 lane count 1 [20:05:20] [PASSED] Link rate 1350000 lane count 4 [20:05:20] [PASSED] Link rate 1350000 lane count 2 [20:05:20] [PASSED] Link rate 1350000 lane count 1 [20:05:20] [PASSED] Link rate 1000000 lane count 4 [20:05:20] [PASSED] Link rate 1000000 lane count 2 [20:05:20] [PASSED] Link rate 1000000 lane count 1 [20:05:20] [PASSED] Link rate 810000 lane count 4 [20:05:20] [PASSED] Link rate 810000 lane count 2 [20:05:20] [PASSED] Link rate 810000 lane count 1 [20:05:20] [PASSED] Link rate 540000 lane count 4 [20:05:20] [PASSED] Link rate 540000 lane count 2 [20:05:20] [PASSED] Link rate 540000 lane count 1 [20:05:20] [PASSED] Link rate 270000 lane count 4 [20:05:20] [PASSED] Link rate 270000 lane count 2 [20:05:20] [PASSED] Link rate 270000 lane count 1 [20:05:20] [PASSED] Link rate 162000 lane count 4 [20:05:20] [PASSED] Link rate 162000 lane count 2 [20:05:20] [PASSED] Link rate 162000 lane count 1 [20:05:20] ========== [PASSED] drm_test_dp_mst_calc_pbn_div =========== [20:05:20] ========= drm_test_dp_mst_sideband_msg_req_decode ========= [20:05:20] [PASSED] DP_ENUM_PATH_RESOURCES with port number [20:05:20] [PASSED] DP_POWER_UP_PHY with port number [20:05:20] [PASSED] DP_POWER_DOWN_PHY with port number [20:05:20] [PASSED] DP_ALLOCATE_PAYLOAD with SDP stream sinks [20:05:20] [PASSED] DP_ALLOCATE_PAYLOAD with port number [20:05:20] [PASSED] DP_ALLOCATE_PAYLOAD with VCPI [20:05:20] [PASSED] DP_ALLOCATE_PAYLOAD with PBN [20:05:20] [PASSED] DP_QUERY_PAYLOAD with port number [20:05:20] [PASSED] DP_QUERY_PAYLOAD with VCPI [20:05:20] [PASSED] DP_REMOTE_DPCD_READ with port number [20:05:20] [PASSED] DP_REMOTE_DPCD_READ with DPCD address [20:05:20] [PASSED] DP_REMOTE_DPCD_READ with max number of bytes [20:05:20] [PASSED] DP_REMOTE_DPCD_WRITE with port number [20:05:20] [PASSED] DP_REMOTE_DPCD_WRITE with DPCD address [20:05:20] [PASSED] DP_REMOTE_DPCD_WRITE with data array [20:05:20] [PASSED] DP_REMOTE_I2C_READ with port number [20:05:20] [PASSED] DP_REMOTE_I2C_READ with I2C device ID [20:05:20] [PASSED] DP_REMOTE_I2C_READ with transactions array [20:05:20] [PASSED] DP_REMOTE_I2C_WRITE with port number [20:05:20] [PASSED] DP_REMOTE_I2C_WRITE with I2C device ID [20:05:20] [PASSED] DP_REMOTE_I2C_WRITE with data array [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream ID [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with client ID [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream event [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with valid stream event [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with stream behavior [20:05:20] [PASSED] DP_QUERY_STREAM_ENC_STATUS with a valid stream behavior [20:05:20] ===== [PASSED] drm_test_dp_mst_sideband_msg_req_decode ===== [20:05:20] ================ [PASSED] drm_dp_mst_helper ================ [20:05:20] ================== drm_exec (7 subtests) =================== [20:05:20] [PASSED] sanitycheck [20:05:20] [PASSED] test_lock [20:05:20] [PASSED] test_lock_unlock [20:05:20] [PASSED] test_duplicates [20:05:20] [PASSED] test_prepare [20:05:20] [PASSED] test_prepare_array [20:05:20] [PASSED] test_multiple_loops [20:05:20] ==================== [PASSED] drm_exec ===================== [20:05:20] =========== drm_format_helper_test (18 subtests) =========== [20:05:20] ============== drm_test_fb_xrgb8888_to_gray8 ============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========== [PASSED] drm_test_fb_xrgb8888_to_gray8 ========== [20:05:20] ============= drm_test_fb_xrgb8888_to_rgb332 ============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb332 ========== [20:05:20] ============= drm_test_fb_xrgb8888_to_rgb565 ============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb565 ========== [20:05:20] ============ drm_test_fb_xrgb8888_to_xrgb1555 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_xrgb1555 ========= [20:05:20] ============ drm_test_fb_xrgb8888_to_argb1555 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_argb1555 ========= [20:05:20] ============ drm_test_fb_xrgb8888_to_rgba5551 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_rgba5551 ========= [20:05:20] ============= drm_test_fb_xrgb8888_to_rgb888 ============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========= [PASSED] drm_test_fb_xrgb8888_to_rgb888 ========== [20:05:20] ============= drm_test_fb_xrgb8888_to_bgr888 ============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========= [PASSED] drm_test_fb_xrgb8888_to_bgr888 ========== [20:05:20] ============ drm_test_fb_xrgb8888_to_argb8888 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_argb8888 ========= [20:05:20] =========== drm_test_fb_xrgb8888_to_xrgb2101010 =========== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======= [PASSED] drm_test_fb_xrgb8888_to_xrgb2101010 ======= [20:05:20] =========== drm_test_fb_xrgb8888_to_argb2101010 =========== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======= [PASSED] drm_test_fb_xrgb8888_to_argb2101010 ======= [20:05:20] ============== drm_test_fb_xrgb8888_to_mono =============== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ========== [PASSED] drm_test_fb_xrgb8888_to_mono =========== [20:05:20] ==================== drm_test_fb_swab ===================== [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ================ [PASSED] drm_test_fb_swab ================= [20:05:20] ============ drm_test_fb_xrgb8888_to_xbgr8888 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_xbgr8888 ========= [20:05:20] ============ drm_test_fb_xrgb8888_to_abgr8888 ============= [20:05:20] [PASSED] single_pixel_source_buffer [20:05:20] [PASSED] single_pixel_clip_rectangle [20:05:20] [PASSED] well_known_colors [20:05:20] [PASSED] destination_pitch [20:05:20] ======== [PASSED] drm_test_fb_xrgb8888_to_abgr8888 ========= [20:05:20] ================= drm_test_fb_clip_offset ================= [20:05:20] [PASSED] pass through [20:05:20] [PASSED] horizontal offset [20:05:20] [PASSED] vertical offset [20:05:20] [PASSED] horizontal and vertical offset [20:05:20] [PASSED] horizontal offset (custom pitch) [20:05:20] [PASSED] vertical offset (custom pitch) [20:05:20] [PASSED] horizontal and vertical offset (custom pitch) [20:05:20] ============= [PASSED] drm_test_fb_clip_offset ============= [20:05:20] ============== drm_test_fb_build_fourcc_list ============== [20:05:20] [PASSED] no native formats [20:05:20] [PASSED] XRGB8888 as native format [20:05:20] [PASSED] remove duplicates [20:05:20] [PASSED] convert alpha formats [20:05:20] [PASSED] random formats [20:05:20] ========== [PASSED] drm_test_fb_build_fourcc_list ========== [20:05:20] =================== drm_test_fb_memcpy ==================== [20:05:20] [PASSED] single_pixel_source_buffer: XR24 little-endian (0x34325258) [20:05:20] [PASSED] single_pixel_source_buffer: XRA8 little-endian (0x38415258) [20:05:20] [PASSED] single_pixel_source_buffer: YU24 little-endian (0x34325559) [20:05:20] [PASSED] single_pixel_clip_rectangle: XB24 little-endian (0x34324258) [20:05:20] [PASSED] single_pixel_clip_rectangle: XRA8 little-endian (0x38415258) [20:05:20] [PASSED] single_pixel_clip_rectangle: YU24 little-endian (0x34325559) [20:05:20] [PASSED] well_known_colors: XB24 little-endian (0x34324258) [20:05:20] [PASSED] well_known_colors: XRA8 little-endian (0x38415258) [20:05:20] [PASSED] well_known_colors: YU24 little-endian (0x34325559) [20:05:20] [PASSED] destination_pitch: XB24 little-endian (0x34324258) [20:05:20] [PASSED] destination_pitch: XRA8 little-endian (0x38415258) [20:05:20] [PASSED] destination_pitch: YU24 little-endian (0x34325559) [20:05:20] =============== [PASSED] drm_test_fb_memcpy ================ [20:05:20] ============= [PASSED] drm_format_helper_test ============== [20:05:20] ================= drm_format (18 subtests) ================= [20:05:20] [PASSED] drm_test_format_block_width_invalid [20:05:20] [PASSED] drm_test_format_block_width_one_plane [20:05:20] [PASSED] drm_test_format_block_width_two_plane [20:05:20] [PASSED] drm_test_format_block_width_three_plane [20:05:20] [PASSED] drm_test_format_block_width_tiled [20:05:20] [PASSED] drm_test_format_block_height_invalid [20:05:20] [PASSED] drm_test_format_block_height_one_plane [20:05:20] [PASSED] drm_test_format_block_height_two_plane [20:05:20] [PASSED] drm_test_format_block_height_three_plane [20:05:20] [PASSED] drm_test_format_block_height_tiled [20:05:20] [PASSED] drm_test_format_min_pitch_invalid [20:05:20] [PASSED] drm_test_format_min_pitch_one_plane_8bpp [20:05:20] [PASSED] drm_test_format_min_pitch_one_plane_16bpp [20:05:20] [PASSED] drm_test_format_min_pitch_one_plane_24bpp [20:05:20] [PASSED] drm_test_format_min_pitch_one_plane_32bpp [20:05:20] [PASSED] drm_test_format_min_pitch_two_plane [20:05:20] [PASSED] drm_test_format_min_pitch_three_plane_8bpp [20:05:20] [PASSED] drm_test_format_min_pitch_tiled [20:05:20] =================== [PASSED] drm_format ==================== [20:05:20] ============== drm_framebuffer (10 subtests) =============== [20:05:20] ========== drm_test_framebuffer_check_src_coords ========== [20:05:20] [PASSED] Success: source fits into fb [20:05:20] [PASSED] Fail: overflowing fb with x-axis coordinate [20:05:20] [PASSED] Fail: overflowing fb with y-axis coordinate [20:05:20] [PASSED] Fail: overflowing fb with source width [20:05:20] [PASSED] Fail: overflowing fb with source height [20:05:20] ====== [PASSED] drm_test_framebuffer_check_src_coords ====== [20:05:20] [PASSED] drm_test_framebuffer_cleanup [20:05:20] =============== drm_test_framebuffer_create =============== [20:05:20] [PASSED] ABGR8888 normal sizes [20:05:20] [PASSED] ABGR8888 max sizes [20:05:20] [PASSED] ABGR8888 pitch greater than min required [20:05:20] [PASSED] ABGR8888 pitch less than min required [20:05:20] [PASSED] ABGR8888 Invalid width [20:05:20] [PASSED] ABGR8888 Invalid buffer handle [20:05:20] [PASSED] No pixel format [20:05:20] [PASSED] ABGR8888 Width 0 [20:05:20] [PASSED] ABGR8888 Height 0 [20:05:20] [PASSED] ABGR8888 Out of bound height * pitch combination [20:05:20] [PASSED] ABGR8888 Large buffer offset [20:05:20] [PASSED] ABGR8888 Buffer offset for inexistent plane [20:05:20] [PASSED] ABGR8888 Invalid flag [20:05:20] [PASSED] ABGR8888 Set DRM_MODE_FB_MODIFIERS without modifiers [20:05:20] [PASSED] ABGR8888 Valid buffer modifier [20:05:20] [PASSED] ABGR8888 Invalid buffer modifier(DRM_FORMAT_MOD_SAMSUNG_64_32_TILE) [20:05:20] [PASSED] ABGR8888 Extra pitches without DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] ABGR8888 Extra pitches with DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] NV12 Normal sizes [20:05:20] [PASSED] NV12 Max sizes [20:05:20] [PASSED] NV12 Invalid pitch [20:05:20] [PASSED] NV12 Invalid modifier/missing DRM_MODE_FB_MODIFIERS flag [20:05:20] [PASSED] NV12 different modifier per-plane [20:05:20] [PASSED] NV12 with DRM_FORMAT_MOD_SAMSUNG_64_32_TILE [20:05:20] [PASSED] NV12 Valid modifiers without DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] NV12 Modifier for inexistent plane [20:05:20] [PASSED] NV12 Handle for inexistent plane [20:05:20] [PASSED] NV12 Handle for inexistent plane without DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] YVU420 DRM_MODE_FB_MODIFIERS set without modifier [20:05:20] [PASSED] YVU420 Normal sizes [20:05:20] [PASSED] YVU420 Max sizes [20:05:20] [PASSED] YVU420 Invalid pitch [20:05:20] [PASSED] YVU420 Different pitches [20:05:20] [PASSED] YVU420 Different buffer offsets/pitches [20:05:20] [PASSED] YVU420 Modifier set just for plane 0, without DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] YVU420 Modifier set just for planes 0, 1, without DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] YVU420 Modifier set just for plane 0, 1, with DRM_MODE_FB_MODIFIERS [20:05:20] [PASSED] YVU420 Valid modifier [20:05:20] [PASSED] YVU420 Different modifiers per plane [20:05:20] [PASSED] YVU420 Modifier for inexistent plane [20:05:20] [PASSED] YUV420_10BIT Invalid modifier(DRM_FORMAT_MOD_LINEAR) [20:05:20] [PASSED] X0L2 Normal sizes [20:05:20] [PASSED] X0L2 Max sizes [20:05:20] [PASSED] X0L2 Invalid pitch [20:05:20] [PASSED] X0L2 Pitch greater than minimum required [20:05:20] [PASSED] X0L2 Handle for inexistent plane [20:05:20] [PASSED] X0L2 Offset for inexistent plane, without DRM_MODE_FB_MODIFIERS set [20:05:20] [PASSED] X0L2 Modifier without DRM_MODE_FB_MODIFIERS set [20:05:20] [PASSED] X0L2 Valid modifier [20:05:20] [PASSED] X0L2 Modifier for inexistent plane [20:05:20] =========== [PASSED] drm_test_framebuffer_create =========== [20:05:20] [PASSED] drm_test_framebuffer_free [20:05:20] [PASSED] drm_test_framebuffer_init [20:05:20] [PASSED] drm_test_framebuffer_init_bad_format [20:05:20] [PASSED] drm_test_framebuffer_init_dev_mismatch [20:05:20] [PASSED] drm_test_framebuffer_lookup [20:05:20] [PASSED] drm_test_framebuffer_lookup_inexistent [20:05:20] [PASSED] drm_test_framebuffer_modifiers_not_supported [20:05:20] ================= [PASSED] drm_framebuffer ================= [20:05:20] ================ drm_gem_shmem (8 subtests) ================ [20:05:20] [PASSED] drm_gem_shmem_test_obj_create [20:05:20] [PASSED] drm_gem_shmem_test_obj_create_private [20:05:20] [PASSED] drm_gem_shmem_test_pin_pages [20:05:20] [PASSED] drm_gem_shmem_test_vmap [20:05:20] [PASSED] drm_gem_shmem_test_get_pages_sgt [20:05:20] [PASSED] drm_gem_shmem_test_get_sg_table [20:05:20] [PASSED] drm_gem_shmem_test_madvise [20:05:20] [PASSED] drm_gem_shmem_test_purge [20:05:20] ================== [PASSED] drm_gem_shmem ================== [20:05:20] === drm_atomic_helper_connector_hdmi_check (27 subtests) === [20:05:20] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode [20:05:20] [PASSED] drm_test_check_broadcast_rgb_auto_cea_mode_vic_1 [20:05:20] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode [20:05:20] [PASSED] drm_test_check_broadcast_rgb_full_cea_mode_vic_1 [20:05:20] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode [20:05:20] [PASSED] drm_test_check_broadcast_rgb_limited_cea_mode_vic_1 [20:05:20] ====== drm_test_check_broadcast_rgb_cea_mode_yuv420 ======= [20:05:20] [PASSED] Automatic [20:05:20] [PASSED] Full [20:05:20] [PASSED] Limited 16:235 [20:05:20] == [PASSED] drm_test_check_broadcast_rgb_cea_mode_yuv420 === [20:05:20] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_changed [20:05:20] [PASSED] drm_test_check_broadcast_rgb_crtc_mode_not_changed [20:05:20] [PASSED] drm_test_check_disable_connector [20:05:20] [PASSED] drm_test_check_hdmi_funcs_reject_rate [20:05:20] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_rgb [20:05:20] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_yuv420 [20:05:20] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv422 [20:05:20] [PASSED] drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv420 [20:05:20] [PASSED] drm_test_check_driver_unsupported_fallback_yuv420 [20:05:20] [PASSED] drm_test_check_output_bpc_crtc_mode_changed [20:05:20] [PASSED] drm_test_check_output_bpc_crtc_mode_not_changed [20:05:20] [PASSED] drm_test_check_output_bpc_dvi [20:05:20] [PASSED] drm_test_check_output_bpc_format_vic_1 [20:05:20] [PASSED] drm_test_check_output_bpc_format_display_8bpc_only [20:05:20] [PASSED] drm_test_check_output_bpc_format_display_rgb_only [20:05:20] [PASSED] drm_test_check_output_bpc_format_driver_8bpc_only [20:05:20] [PASSED] drm_test_check_output_bpc_format_driver_rgb_only [20:05:20] [PASSED] drm_test_check_tmds_char_rate_rgb_8bpc [20:05:20] [PASSED] drm_test_check_tmds_char_rate_rgb_10bpc [20:05:20] [PASSED] drm_test_check_tmds_char_rate_rgb_12bpc [20:05:20] ===== [PASSED] drm_atomic_helper_connector_hdmi_check ====== [20:05:20] === drm_atomic_helper_connector_hdmi_reset (6 subtests) ==== [20:05:20] [PASSED] drm_test_check_broadcast_rgb_value [20:05:20] [PASSED] drm_test_check_bpc_8_value [20:05:20] [PASSED] drm_test_check_bpc_10_value [20:05:20] [PASSED] drm_test_check_bpc_12_value [20:05:20] [PASSED] drm_test_check_format_value [20:05:20] [PASSED] drm_test_check_tmds_char_value [20:05:20] ===== [PASSED] drm_atomic_helper_connector_hdmi_reset ====== [20:05:20] = drm_atomic_helper_connector_hdmi_mode_valid (4 subtests) = [20:05:20] [PASSED] drm_test_check_mode_valid [20:05:20] [PASSED] drm_test_check_mode_valid_reject [20:05:20] [PASSED] drm_test_check_mode_valid_reject_rate [20:05:20] [PASSED] drm_test_check_mode_valid_reject_max_clock [20:05:20] === [PASSED] drm_atomic_helper_connector_hdmi_mode_valid === [20:05:20] ================= drm_managed (2 subtests) ================= [20:05:20] [PASSED] drm_test_managed_release_action [20:05:20] [PASSED] drm_test_managed_run_action [20:05:20] =================== [PASSED] drm_managed =================== [20:05:20] =================== drm_mm (6 subtests) ==================== [20:05:20] [PASSED] drm_test_mm_init [20:05:20] [PASSED] drm_test_mm_debug [20:05:20] [PASSED] drm_test_mm_align32 [20:05:20] [PASSED] drm_test_mm_align64 [20:05:20] [PASSED] drm_test_mm_lowest [20:05:20] [PASSED] drm_test_mm_highest [20:05:20] ===================== [PASSED] drm_mm ====================== [20:05:20] ============= drm_modes_analog_tv (5 subtests) ============= [20:05:20] [PASSED] drm_test_modes_analog_tv_mono_576i [20:05:20] [PASSED] drm_test_modes_analog_tv_ntsc_480i [20:05:20] [PASSED] drm_test_modes_analog_tv_ntsc_480i_inlined [20:05:20] [PASSED] drm_test_modes_analog_tv_pal_576i [20:05:20] [PASSED] drm_test_modes_analog_tv_pal_576i_inlined [20:05:20] =============== [PASSED] drm_modes_analog_tv =============== [20:05:20] ============== drm_plane_helper (2 subtests) =============== [20:05:20] =============== drm_test_check_plane_state ================ [20:05:20] [PASSED] clipping_simple [20:05:20] [PASSED] clipping_rotate_reflect [20:05:20] [PASSED] positioning_simple [20:05:20] [PASSED] upscaling [20:05:20] [PASSED] downscaling [20:05:20] [PASSED] rounding1 [20:05:20] [PASSED] rounding2 [20:05:20] [PASSED] rounding3 [20:05:20] [PASSED] rounding4 [20:05:20] =========== [PASSED] drm_test_check_plane_state ============ [20:05:20] =========== drm_test_check_invalid_plane_state ============ [20:05:20] [PASSED] positioning_invalid [20:05:20] [PASSED] upscaling_invalid [20:05:20] [PASSED] downscaling_invalid [20:05:20] ======= [PASSED] drm_test_check_invalid_plane_state ======== [20:05:20] ================ [PASSED] drm_plane_helper ================= [20:05:20] ====== drm_connector_helper_tv_get_modes (1 subtest) ======= [20:05:20] ====== drm_test_connector_helper_tv_get_modes_check ======= [20:05:20] [PASSED] None [20:05:20] [PASSED] PAL [20:05:20] [PASSED] NTSC [20:05:20] [PASSED] Both, NTSC Default [20:05:20] [PASSED] Both, PAL Default [20:05:20] [PASSED] Both, NTSC Default, with PAL on command-line [20:05:20] [PASSED] Both, PAL Default, with NTSC on command-line [20:05:20] == [PASSED] drm_test_connector_helper_tv_get_modes_check === [20:05:20] ======== [PASSED] drm_connector_helper_tv_get_modes ======== [20:05:20] ================== drm_rect (9 subtests) =================== [20:05:20] [PASSED] drm_test_rect_clip_scaled_div_by_zero [20:05:20] [PASSED] drm_test_rect_clip_scaled_not_clipped [20:05:20] [PASSED] drm_test_rect_clip_scaled_clipped [20:05:20] [PASSED] drm_test_rect_clip_scaled_signed_vs_unsigned [20:05:20] ================= drm_test_rect_intersect ================= [20:05:20] [PASSED] top-left x bottom-right: 2x2+1+1 x 2x2+0+0 [20:05:20] [PASSED] top-right x bottom-left: 2x2+0+0 x 2x2+1-1 [20:05:20] [PASSED] bottom-left x top-right: 2x2+1-1 x 2x2+0+0 [20:05:20] [PASSED] bottom-right x top-left: 2x2+0+0 x 2x2+1+1 [20:05:20] [PASSED] right x left: 2x1+0+0 x 3x1+1+0 [20:05:20] [PASSED] left x right: 3x1+1+0 x 2x1+0+0 [20:05:20] [PASSED] up x bottom: 1x2+0+0 x 1x3+0-1 [20:05:20] [PASSED] bottom x up: 1x3+0-1 x 1x2+0+0 [20:05:20] [PASSED] touching corner: 1x1+0+0 x 2x2+1+1 [20:05:20] [PASSED] touching side: 1x1+0+0 x 1x1+1+0 [20:05:20] [PASSED] equal rects: 2x2+0+0 x 2x2+0+0 [20:05:20] [PASSED] inside another: 2x2+0+0 x 1x1+1+1 [20:05:20] [PASSED] far away: 1x1+0+0 x 1x1+3+6 [20:05:20] [PASSED] points intersecting: 0x0+5+10 x 0x0+5+10 [20:05:20] [PASSED] points not intersecting: 0x0+0+0 x 0x0+5+10 [20:05:20] ============= [PASSED] drm_test_rect_intersect ============= [20:05:20] ================ drm_test_rect_calc_hscale ================ [20:05:20] [PASSED] normal use [20:05:20] [PASSED] out of max range [20:05:20] [PASSED] out of min range [20:05:20] [PASSED] zero dst [20:05:20] [PASSED] negative src [20:05:20] [PASSED] negative dst [20:05:20] ============ [PASSED] drm_test_rect_calc_hscale ============ [20:05:20] ================ drm_test_rect_calc_vscale ================ [20:05:20] [PASSED] normal use [20:05:20] [PASSED] out of max range [20:05:20] [PASSED] out of min range [20:05:20] [PASSED] zero dst [20:05:20] [PASSED] negative src [20:05:20] [PASSED] negative dst [20:05:20] ============ [PASSED] drm_test_rect_calc_vscale ============ [20:05:20] ================== drm_test_rect_rotate =================== [20:05:20] [PASSED] reflect-x [20:05:20] [PASSED] reflect-y [20:05:20] [PASSED] rotate-0 [20:05:20] [PASSED] rotate-90 [20:05:20] [PASSED] rotate-180 stty: 'standard input': Inappropriate ioctl for device [20:05:20] [PASSED] rotate-270 [20:05:20] ============== [PASSED] drm_test_rect_rotate =============== [20:05:20] ================ drm_test_rect_rotate_inv ================= [20:05:20] [PASSED] reflect-x [20:05:20] [PASSED] reflect-y [20:05:20] [PASSED] rotate-0 [20:05:20] [PASSED] rotate-90 [20:05:20] [PASSED] rotate-180 [20:05:20] [PASSED] rotate-270 [20:05:20] ============ [PASSED] drm_test_rect_rotate_inv ============= [20:05:20] ==================== [PASSED] drm_rect ===================== [20:05:20] ============================================================ [20:05:20] Testing complete. Ran 614 tests: passed: 614 [20:05:20] Elapsed time: 23.398s total, 1.692s configuring, 21.490s building, 0.199s running
+ /kernel/tools/testing/kunit/kunit.py run --kunitconfig /kernel/drivers/gpu/drm/ttm/tests/.kunitconfig ERROR:root:../drivers/gpu/drm/ttm/ttm_pool.c: In function ‘ttm_pool_mgr_init’:../drivers/gpu/drm/ttm/ttm_pool.c:1335:30: error: ‘TTM_SHRINKER_BATCH’ undeclared (first use in this function)
1335 | mm_shrinker->batch = TTM_SHRINKER_BATCH;
| ^~~~~~~~~~~~~~~~~~../drivers/gpu/drm/ttm/ttm_pool.c:1335:30: note: each undeclared identifier is reported only once for each function it appears in make[7]: *** [../scripts/Makefile.build:203: drivers/gpu/drm/ttm/ttm_pool.o] Error 1
make[7]: *** Waiting for unfinished jobs....
make[6]: *** [../scripts/Makefile.build:461: drivers/gpu/drm/ttm] Error 2
make[5]: *** [../scripts/Makefile.build:461: drivers/gpu/drm] Error 2
make[4]: *** [../scripts/Makefile.build:461: drivers/gpu] Error 2
make[3]: *** [../scripts/Makefile.build:461: drivers] Error 2
make[2]: *** [/kernel/Makefile:2003: .] Error 2
make[1]: *** [/kernel/Makefile:248: __sub-make] Error 2
make: *** [Makefile:248: __sub-make] Error 2
[20:05:20] Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=um O=.kunit olddefconfig [20:05:22] Building KUnit Kernel ... Populating config with: $ make ARCH=um O=.kunit olddefconfig Building with: $ make all compile_commands.json scripts_gdb ARCH=um O=.kunit --jobs=48 + cleanup ++ stat -c %u:%g /kernel + chown -R 1003:1003 /kernel
Patchwork
CI✗ i915.CI.BAT: failure for Enable/Disable DC balance along with VRR DSB (rev6)
In reply to Mitul Golani== Series Details ==
== Series Details ==
Series: Enable/Disable DC balance along with VRR DSB (rev6)
URL : https://patchwork.freedesktop.org/series/147799/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_16640 -> Patchwork_147799v6
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_147799v6 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes
introduced in Patchwork_147799v6, please notify your bug team ([email protected]) to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/index.html
Participating hosts (42 -> 42)
------------------------------
Additional (1): bat-arlh-2
Missing (1): fi-snb-2520m
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_147799v6:
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live@guc_multi_lrc:
- bat-twl-2: [PASS][1] -> [ABORT][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-twl-2/igt@i915_selftest@live@guc_multi_lrc.html
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-twl-2/igt@i915_selftest@live@guc_multi_lrc.html
Known issues
------------
Here are the changes found in Patchwork_147799v6 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@dmabuf@all-tests@dma_fence_chain:
- fi-bsw-n3050: [PASS][3] -> [INCOMPLETE][4] ([i915#12904]) +1 other test incomplete
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/fi-bsw-n3050/igt@dmabuf@all-tests@dma_fence_chain.html
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/fi-bsw-n3050/igt@dmabuf@all-tests@dma_fence_chain.html
* igt@fbdev@eof:
- bat-arlh-2: NOTRUN -> [SKIP][5] ([i915#11345] / [i915#11346]) +3 other tests skip
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@fbdev@info:
- bat-arlh-2: NOTRUN -> [SKIP][6] ([i915#11346] / [i915#1849])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@gem_lmem_swapping@basic:
- bat-arlh-2: NOTRUN -> [SKIP][7] ([i915#10213] / [i915#11346] / [i915#11671]) +3 other tests skip
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@gem_mmap@basic:
- bat-arlh-2: NOTRUN -> [SKIP][8] ([i915#11343] / [i915#11346])
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@gem_render_tiled_blits@basic:
- bat-arlh-2: NOTRUN -> [SKIP][9] ([i915#10197] / [i915#10211] / [i915#11346] / [i915#11725])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@gem_tiled_blits@basic:
- bat-arlh-2: NOTRUN -> [SKIP][10] ([i915#11346] / [i915#12637]) +4 other tests skip
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@gem_tiled_pread_basic:
- bat-arlh-2: NOTRUN -> [SKIP][11] ([i915#10206] / [i915#11346] / [i915#11724])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@gem_tiled_pread_basic.html
* igt@i915_pm_rps@basic-api:
- bat-arlh-2: NOTRUN -> [SKIP][12] ([i915#10209] / [i915#11346] / [i915#11681])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@i915_selftest@live:
- bat-twl-2: [PASS][13] -> [ABORT][14] ([i915#14357])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-twl-2/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-twl-2/igt@[email protected]
* igt@i915_selftest@live@workarounds:
- bat-dg2-9: [PASS][15] -> [DMESG-FAIL][16] ([i915#12061]) +1 other test dmesg-fail
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-dg2-9/igt@i915_selftest@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-dg2-9/igt@i915_selftest@[email protected]
* igt@intel_hwmon@hwmon-read:
- bat-arlh-2: NOTRUN -> [SKIP][17] ([i915#11346] / [i915#11680] / [i915#7707]) +1 other test skip
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@kms_addfb_basic@addfb25-y-tiled-small-legacy:
- bat-arlh-2: NOTRUN -> [SKIP][18] ([i915#10200] / [i915#11346] / [i915#11666] / [i915#12203])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@kms_addfb_basic@basic-x-tiled-legacy:
- bat-arlh-2: NOTRUN -> [SKIP][19] ([i915#10200] / [i915#11346] / [i915#11666]) +8 other tests skip
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@kms_psr@psr-primary-page-flip:
- bat-arlh-2: NOTRUN -> [SKIP][20] ([i915#11346]) +32 other tests skip
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@kms_setmode@basic-clone-single-crtc:
- bat-arlh-2: NOTRUN -> [SKIP][21] ([i915#10208] / [i915#11346] / [i915#8809])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@prime_vgem@basic-fence-read:
- bat-arlh-2: NOTRUN -> [SKIP][22] ([i915#10212] / [i915#11346] / [i915#11726])
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@prime_vgem@basic-read:
- bat-arlh-2: NOTRUN -> [SKIP][23] ([i915#10214] / [i915#11346] / [i915#11726])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
* igt@prime_vgem@basic-write:
- bat-arlh-2: NOTRUN -> [SKIP][24] ([i915#10216] / [i915#11346] / [i915#11723])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-arlh-2/igt@[email protected]
#### Possible fixes ####
* igt@core_auth@basic-auth:
- bat-twl-2: [DMESG-WARN][25] ([i915#13736]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-twl-2/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-twl-2/igt@[email protected]
* igt@dmabuf@all-tests:
- bat-apl-1: [INCOMPLETE][27] ([i915#12904]) -> [PASS][28] +1 other test pass
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-apl-1/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-apl-1/igt@[email protected]
* igt@dmabuf@all-tests@dma_fence_chain:
- fi-bsw-nick: [INCOMPLETE][29] ([i915#12904]) -> [PASS][30] +1 other test pass
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/fi-bsw-nick/igt@dmabuf@all-tests@dma_fence_chain.html
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/fi-bsw-nick/igt@dmabuf@all-tests@dma_fence_chain.html
* igt@i915_selftest@live@workarounds:
- bat-mtlp-6: [DMESG-FAIL][31] ([i915#12061]) -> [PASS][32] +1 other test pass
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-mtlp-6/igt@i915_selftest@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-mtlp-6/igt@i915_selftest@[email protected]
- bat-dg2-11: [DMESG-FAIL][33] ([i915#12061]) -> [PASS][34] +1 other test pass
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-dg2-11/igt@i915_selftest@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-dg2-11/igt@i915_selftest@[email protected]
- bat-dg2-14: [DMESG-FAIL][35] ([i915#12061]) -> [PASS][36] +1 other test pass
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_16640/bat-dg2-14/igt@i915_selftest@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/bat-dg2-14/igt@i915_selftest@[email protected]
[i915#10197]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10197
[i915#10200]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10200
[i915#10206]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10206
[i915#10208]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10208
[i915#10209]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10209
[i915#10211]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10211
[i915#10212]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10212
[i915#10213]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10213
[i915#10214]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10214
[i915#10216]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10216
[i915#11343]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11343
[i915#11345]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11345
[i915#11346]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11346
[i915#11666]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11666
[i915#11671]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11671
[i915#11680]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11680
[i915#11681]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11681
[i915#11723]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11723
[i915#11724]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11724
[i915#11725]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11725
[i915#11726]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11726
[i915#12061]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
[i915#12203]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12203
[i915#12637]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12637
[i915#12904]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12904
[i915#13736]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13736
[i915#14357]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14357
[i915#1849]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/1849
[i915#7707]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/7707
[i915#8809]: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/8809
Build changes
-------------
* Linux: CI_DRM_16640 -> Patchwork_147799v6
CI-20190529: 20190529
CI_DRM_16640: ba486e3b10ce5b4ee4d1ffc58aa4cc3b669c02a3 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_8392: 8392
Patchwork_147799v6: ba486e3b10ce5b4ee4d1ffc58aa4cc3b669c02a3 @ git://anongit.freedesktop.org/gfx-ci/linux
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_147799v6/index.html