Skip to contentSkip to conversation

ramfb: Add property to control if load the romfile

PATCH Superseded Shaoqin Huang 4 participants 9 messages Jun 9, 2025 – Jun 16, 2025

v3 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

v3 cover ramfb: Add property to control if load the romfile

Now the ramfb will load the vgabios-ramfb.bin unconditionally, but only the x86 need the vgabios-ramfb.bin, this can cause that when use the release package on arm64 it can't find the vgabios-ramfb.bin.

Because only seabios will use the vgabios-ramfb.bin, load the rom logic is x86-specific. For other !x86 platforms, the edk2 ships an EFI driver for ramfb, so they don't need to load the romfile.

So add a new property use_legacy_x86_rom in both ramfb and vfio_pci device, because the vfio display also use the ramfb_setup() to load the vgabios-ramfb.bin file.

After have this property, the machine type can set the compatibility to not load the vgabios-ramfb.bin if the arch doesn't need it.

I set the "use-legacy-x86-rom" property on arm to false, thus the arm won't load the vgabios-ramfb.bin.

I want to set the "use-legacy-x86-rom" property to false by default, and only set it to true on x86, but I didn't find the similiar thing like the arm_virt_compat, so I didn't use this way.

Changelog:
---------
v2 -> v3:
- Fix the underscore error.
- Add a new patch to set the property in arm compatibility.
v1 -> v2:
- Change the property name.

v2: https://lore.kernel.org/all/[email protected]/
v1: https://lore.kernel.org/all/[email protected]/

Shaoqin Huang (2):
ramfb: Add property to control if load the romfile hw/arm: Add the romfile compatatibility

 hw/arm/virt.c                 | 3 +++
 hw/display/ramfb-standalone.c | 4 +++-
 hw/display/ramfb-stubs.c      | 2 +-
 hw/display/ramfb.c            | 6 ++++--
 hw/vfio/display.c             | 4 ++--
 hw/vfio/pci.c                 | 1 +
 hw/vfio/pci.h                 | 1 +
 include/hw/display/ramfb.h    | 2 +-
 8 files changed, 16 insertions(+), 7 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH v3 1/2 ramfb: Add property to control if load the romfile

Now the ramfb will load the vgabios-ramfb.bin unconditionally, but only the x86 need the vgabios-ramfb.bin, this can cause that when use the release package on arm64 it can't find the vgabios-ramfb.bin.

Because only seabios will use the vgabios-ramfb.bin, load the rom logic is x86-specific. For other !x86 platforms, the edk2 ships an EFI driver for ramfb, so they don't need to load the romfile.

So add a new property use_legacy_x86_rom in both ramfb and vfio_pci device, because the vfio display also use the ramfb_setup() to load the vgabios-ramfb.bin file.

After have this property, the machine type can set the compatibility to not load the vgabios-ramfb.bin if the arch doesn't need it.

---
 hw/display/ramfb-standalone.c | 4 +++-
 hw/display/ramfb-stubs.c      | 2 +-
 hw/display/ramfb.c            | 6 ++++--
 hw/vfio/display.c             | 4 ++--
 hw/vfio/pci.c                 | 1 +
 hw/vfio/pci.h                 | 1 +
 include/hw/display/ramfb.h    | 2 +-
 7 files changed, 13 insertions(+), 7 deletions(-)
hw/display/ramfb-standalone.c +3 -1
index 1be106b57f..af1175bf96 100644
@@ -17,6 +17,7 @@ struct RAMFBStandaloneState {
     QemuConsole *con;
     RAMFBState *state;
     bool migrate;
+    bool use_legacy_x86_rom;
 };
 
 static void display_update_wrapper(void *dev)
@@ -39,7 +40,7 @@ static void ramfb_realizefn(DeviceState *dev, Error **errp)
     RAMFBStandaloneState *ramfb = RAMFB(dev);
 
     ramfb->con = graphic_console_init(dev, 0, &wrapper_ops, dev);
-    ramfb->state = ramfb_setup(errp);
+    ramfb->state = ramfb_setup(ramfb->use_legacy_x86_rom, errp);
 }
 
 static bool migrate_needed(void *opaque)
@@ -62,6 +63,7 @@ static const VMStateDescription ramfb_dev_vmstate = {
 
 static const Property ramfb_properties[] = {
     DEFINE_PROP_BOOL("x-migrate", RAMFBStandaloneState, migrate,  true),
+    DEFINE_PROP_BOOL("use-legacy-x86-rom", RAMFBStandaloneState, use_legacy_x86_rom, true),
 };
 
 static void ramfb_class_initfn(ObjectClass *klass, void *data)
hw/display/ramfb-stubs.c +1 -1
index cf64733b10..b83551357b 100644
@@ -8,7 +8,7 @@ void ramfb_display_update(QemuConsole *con, RAMFBState *s)
 {
 }
 
-RAMFBState *ramfb_setup(Error **errp)
+RAMFBState *ramfb_setup(bool romfile, Error **errp)
 {
     error_setg(errp, "ramfb support not available");
     return NULL;
hw/display/ramfb.c +4 -2
index 8c0f907673..9a17d97d07 100644
@@ -135,7 +135,7 @@ const VMStateDescription ramfb_vmstate = {
     }
 };
 
-RAMFBState *ramfb_setup(Error **errp)
+RAMFBState *ramfb_setup(bool romfile, Error **errp)
 {
     FWCfgState *fw_cfg = fw_cfg_find();
     RAMFBState *s;
@@ -147,7 +147,9 @@ RAMFBState *ramfb_setup(Error **errp)
 
     s = g_new0(RAMFBState, 1);
 
-    rom_add_vga("vgabios-ramfb.bin");
+    if (romfile) {
+        rom_add_vga("vgabios-ramfb.bin");
+    }
     fw_cfg_add_file_callback(fw_cfg, "etc/ramfb",
                              NULL, ramfb_fw_cfg_write, s,
                              &s->cfg, sizeof(s->cfg), false);
hw/vfio/display.c +2 -2
index ea87830fe0..8bfd8eb1e3 100644
@@ -365,7 +365,7 @@ static bool vfio_display_dmabuf_init(VFIOPCIDevice *vdev, Error **errp)
                                           &vfio_display_dmabuf_ops,
                                           vdev);
     if (vdev->enable_ramfb) {
-        vdev->dpy->ramfb = ramfb_setup(errp);
+        vdev->dpy->ramfb = ramfb_setup(vdev->use_legacy_x86_rom, errp);
         if (!vdev->dpy->ramfb) {
             return false;
         }
@@ -494,7 +494,7 @@ static bool vfio_display_region_init(VFIOPCIDevice *vdev, Error **errp)
                                           &vfio_display_region_ops,
                                           vdev);
     if (vdev->enable_ramfb) {
-        vdev->dpy->ramfb = ramfb_setup(errp);
+        vdev->dpy->ramfb = ramfb_setup(vdev->use_legacy_x86_rom, errp);
         if (!vdev->dpy->ramfb) {
             return false;
         }
hw/vfio/pci.c +1 -0
index 7f1532fbed..ff0d93fae0 100644
@@ -3564,6 +3564,7 @@ static const TypeInfo vfio_pci_dev_info = {
 
 static const Property vfio_pci_dev_nohotplug_properties[] = {
     DEFINE_PROP_BOOL("ramfb", VFIOPCIDevice, enable_ramfb, false),
+    DEFINE_PROP_BOOL("use-legacy-x86-rom", VFIOPCIDevice, use_legacy_x86_rom, true),
     DEFINE_PROP_ON_OFF_AUTO("x-ramfb-migrate", VFIOPCIDevice, ramfb_migrate,
                             ON_OFF_AUTO_AUTO),
 };
hw/vfio/pci.h +1 -0
index d94ecaba68..713956157e 100644
@@ -177,6 +177,7 @@ struct VFIOPCIDevice {
     bool no_kvm_ioeventfd;
     bool no_vfio_ioeventfd;
     bool enable_ramfb;
+    bool use_legacy_x86_rom;
     OnOffAuto ramfb_migrate;
     bool defer_kvm_irq_routing;
     bool clear_parent_atomics_on_exit;
include/hw/display/ramfb.h +1 -1
index a7e0019144..172aa6dc89 100644
@@ -6,7 +6,7 @@
 /* ramfb.c */
 typedef struct RAMFBState RAMFBState;
 void ramfb_display_update(QemuConsole *con, RAMFBState *s);
-RAMFBState *ramfb_setup(Error **errp);
+RAMFBState *ramfb_setup(bool romfile, Error **errp);
 
 extern const VMStateDescription ramfb_vmstate;
 
Signature · 1 line
2.40.1
#2 lore raw
Quoted 7 lines · Shaoqin Huang

Now the ramfb will load the vgabios-ramfb.bin unconditionally, but only the x86 need the vgabios-ramfb.bin, this can cause that when use the release package on arm64 it can't find the vgabios-ramfb.bin.

Because only seabios will use the vgabios-ramfb.bin, load the rom logic is x86-specific. For other !x86 platforms, the edk2 ships an EFI driver for ramfb, so they don't need to load the romfile.

vgabios-ramfb.bin is just one of many VGA BIOS ROMs in QEMU

$ git grep vgabios hw/
../hw/display/ati.c:    k->romfile = "vgabios-ati.bin";
../hw/display/bochs-display.c:    k->romfile   = "vgabios-bochs-display.bin";
../hw/display/qxl.c:    k->romfile = "vgabios-qxl.bin";
../hw/display/ramfb.c:    rom_add_vga("vgabios-ramfb.bin");
../hw/display/vga-pci.c:    k->romfile = "vgabios-stdvga.bin";
../hw/display/vga_int.h:#define VGABIOS_FILENAME "vgabios.bin"
../hw/display/vga_int.h:#define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
../hw/display/virtio-vga.c:    pcidev_k->romfile = "vgabios-virtio.bin";
../hw/display/vmware_vga.c:    k->romfile = "vgabios-vmware.bin";
../hw/ppc/amigaone.c: * BIOS emulator in firmware cannot run QEMU vgabios and hangs on it, use
../hw/ppc/amigaone.c: * from http://www.nongnu.org/vgabios/ instead.
../hw/xen/xen_pt_graphics.c:static void *get_vgabios(XenPCIPassthroughState *s, int *size,
../hw/xen/xen_pt_graphics.c:    bios = get_vgabios(s, &bios_size, dev);

At least some of these devices are built into non-x86 system emulators, and would show the same behaviour if the ROM is not installed

$ qemu-system-aarch64  -machine virt -cpu max -device ati-vga
qemu-system-aarch64: -device ati-vga: failed to find romfile "vgabios-ati.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device cirrus-vga
qemu-system-aarch64: -device cirrus-vga: failed to find romfile "vgabios-cirrus.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device VGA
qemu-system-aarch64: -device VGA: failed to find romfile "vgabios-stdvga.bin"

Perhaps some of these devices are non-functional for other reasons ?

None the less if the device is built for non-x86 targets, and the ROM files contain x86-only code that is to be executed by SeaBIOS only, then conceptually this fix should apply to all devices use a VGA BIOS ROM, not just ramfb.

If we're introducing a property to control this usage, then we should fix all devices at once, so we don't need to add separate properties for other devices in future.

Quoted 41 lines

So add a new property use_legacy_x86_rom in both ramfb and vfio_pci device, because the vfio display also use the ramfb_setup() to load the vgabios-ramfb.bin file.

After have this property, the machine type can set the compatibility to not load the vgabios-ramfb.bin if the arch doesn't need it.

---
 hw/display/ramfb-standalone.c | 4 +++-
 hw/display/ramfb-stubs.c      | 2 +-
 hw/display/ramfb.c            | 6 ++++--
 hw/vfio/display.c             | 4 ++--
 hw/vfio/pci.c                 | 1 +
 hw/vfio/pci.h                 | 1 +
 include/hw/display/ramfb.h    | 2 +-
 7 files changed, 13 insertions(+), 7 deletions(-)
hw/display/ramfb-standalone.c +2 -1
index 1be106b57f..af1175bf96 100644
@@ -17,6 +17,7 @@ struct RAMFBStandaloneState {
     QemuConsole *con;
     RAMFBState *state;
     bool migrate;
+    bool use_legacy_x86_rom;
 };
 
 static void display_update_wrapper(void *dev)
@@ -39,7 +40,7 @@ static void ramfb_realizefn(DeviceState *dev, Error **errp)
     RAMFBStandaloneState *ramfb = RAMFB(dev);
 
     ramfb->con = graphic_console_init(dev, 0, &wrapper_ops, dev);
-    ramfb->state = ramfb_setup(errp);
+    ramfb->state = ramfb_setup(ramfb->use_legacy_x86_rom, errp);
 }
 
 static bool migrate_needed(void *opaque)

hw/display/ramfb-standalone.c static const VMStateDescription ramfb_dev_vmstate = { · line 66

Quoted 4 lines
hw/display/ramfb-standalone.c +1 -0
@@ -62,6 +63,7 @@ static const VMStateDescription ramfb_dev_vmstate = {
 
 static const Property ramfb_properties[] = {
     DEFINE_PROP_BOOL("x-migrate", RAMFBStandaloneState, migrate,  true),
+    DEFINE_PROP_BOOL("use-legacy-x86-rom", RAMFBStandaloneState, use_legacy_x86_rom, true),

There are lots of ROMs, so this property name should include some reference to vgabios, perhaps

'use-legacy-vgabios-rom'

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#3 lore raw

Hi,

Quoted 9 lines
$ qemu-system-aarch64  -machine virt -cpu max -device ati-vga
qemu-system-aarch64: -device ati-vga: failed to find romfile "vgabios-ati.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device cirrus-vga
qemu-system-aarch64: -device cirrus-vga: failed to find romfile "vgabios-cirrus.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device VGA
qemu-system-aarch64: -device VGA: failed to find romfile "vgabios-stdvga.bin"

Perhaps some of these devices are non-functional for other reasons ?

Anything with pci memory bars is problematic on arm (which is one of the reasons why ramfb exists in the first place).

Quoted 4 lines

None the less if the device is built for non-x86 targets, and the ROM files contain x86-only code that is to be executed by SeaBIOS only, then conceptually this fix should apply to all devices use a VGA BIOS ROM, not just ramfb.

Note that non-x86 drivers for some of these devices exist, we have at least roms/QemuMacDrivers which includes a driver for (IIRC) stdvga.

The ipxe roms are x86-only too btw. We could make them multi-arch at least for EFI platforms, but given that edk2 ships a virtio-net driver and the recently added EFI archs (aarch64, riscv64, loongarch64) are all younger than virtio-net there is little reason to do so.

Quoted 3 lines

If we're introducing a property to control this usage, then we should fix all devices at once, so we don't need to add separate properties for other devices in future.

All pci devices already have a romfile property. So for most devices this is a matter of setting this property via machine compat properties.

ramfb is a bit different here because it is not a PCI device, so we can't control things with the existing property and need a new one.

take care,
Gerd

#4 lore raw

Hi Gerd, Daniel,

Sorry for the late reply.

Quoted 32 lines · Gerd Hoffmann
   Hi,
Quoted 9 lines
$ qemu-system-aarch64  -machine virt -cpu max -device ati-vga
qemu-system-aarch64: -device ati-vga: failed to find romfile "vgabios-ati.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device cirrus-vga
qemu-system-aarch64: -device cirrus-vga: failed to find romfile "vgabios-cirrus.bin"
$ qemu-system-aarch64  -machine virt -cpu max -device VGA
qemu-system-aarch64: -device VGA: failed to find romfile "vgabios-stdvga.bin"

Perhaps some of these devices are non-functional for other reasons ?

Anything with pci memory bars is problematic on arm (which is one of the reasons why ramfb exists in the first place).

Quoted 4 lines

None the less if the device is built for non-x86 targets, and the ROM files contain x86-only code that is to be executed by SeaBIOS only, then conceptually this fix should apply to all devices use a VGA BIOS ROM, not just ramfb.

Note that non-x86 drivers for some of these devices exist, we have at least roms/QemuMacDrivers which includes a driver for (IIRC) stdvga.

The ipxe roms are x86-only too btw. We could make them multi-arch at least for EFI platforms, but given that edk2 ships a virtio-net driver and the recently added EFI archs (aarch64, riscv64, loongarch64) are all younger than virtio-net there is little reason to do so.

Quoted 3 lines

If we're introducing a property to control this usage, then we should fix all devices at once, so we don't need to add separate properties for other devices in future.

Quoted 5 lines

All pci devices already have a romfile property. So for most devices this is a matter of setting this property via machine compat properties.

ramfb is a bit different here because it is not a PCI device, so we can't control things with the existing property and need a new one.

So I guess I don't need to add property to all these devices and keep the current code is fine?

Thanks,
Shaoqin

Quoted 4 lines

take care,
Gerd

Signature · 1 line
Shaoqin
#5 lore raw

PATCH v3 2/2 hw/arm: Add the romfile compatatibility

In reply to Shaoqin Huang

On arm64, it doesn't use the vgabios-ramfb.bin, so set the property "use-legacy-x86-rom" to false, thus the ramfb won't load the vgabios-ramfb.bin.

This can mitigate the problem that on release version the qemu can't find the vgabios-ramfb.bin if it use the ramfb.

---
 hw/arm/virt.c | 3 +++
 1 file changed, 3 insertions(+)
hw/arm/virt.c +3 -0
index a96452f17a..5f94f7a2ca 100644
@@ -38,6 +38,7 @@
 #include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/block/flash.h"
+#include "hw/vfio/pci.h"
 #include "hw/vfio/vfio-calxeda-xgmac.h"
 #include "hw/vfio/vfio-amd-xgbe.h"
 #include "hw/display/ramfb.h"
@@ -90,6 +91,8 @@
 
 static GlobalProperty arm_virt_compat[] = {
     { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "48" },
+    { TYPE_RAMFB_DEVICE, "use-legacy-x86-rom", "false" },
+    { TYPE_VFIO_PCI, "use-legacy-x86-rom", "false" },
 };
 static const size_t arm_virt_compat_len = G_N_ELEMENTS(arm_virt_compat);
 
Signature · 1 line
2.40.1
#6 lore raw

Re: [PATCH v3 2/2] hw/arm: Add the romfile compatatibility

Quoted 26 lines · Shaoqin Huang

On arm64, it doesn't use the vgabios-ramfb.bin, so set the property "use-legacy-x86-rom" to false, thus the ramfb won't load the vgabios-ramfb.bin.

This can mitigate the problem that on release version the qemu can't find the vgabios-ramfb.bin if it use the ramfb.

---
 hw/arm/virt.c | 3 +++
 1 file changed, 3 insertions(+)
hw/arm/virt.c +1 -0
index a96452f17a..5f94f7a2ca 100644
@@ -38,6 +38,7 @@
 #include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/block/flash.h"
+#include "hw/vfio/pci.h"
 #include "hw/vfio/vfio-calxeda-xgmac.h"
 #include "hw/vfio/vfio-amd-xgbe.h"
 #include "hw/display/ramfb.h"

hw/arm/virt.c line 95

Quoted 5 lines
hw/arm/virt.c +2 -0
@@ -90,6 +91,8 @@
 
 static GlobalProperty arm_virt_compat[] = {
     { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "48" },
+    { TYPE_RAMFB_DEVICE, "use-legacy-x86-rom", "false" },
+    { TYPE_VFIO_PCI, "use-legacy-x86-rom", "false" },

I think we should find a way to make this default to "false" and only be set "true" for x86. Otherwise every single non-x86 board that ever adds support for ramfb and virtio will have to add these two lines, which is a source of future bugs. (Whereas if you forget to mark a new x86 board as needing the legacy rom you'll find out about it pretty quickly.)

thanks
-- PMM

#7 lore raw

Re: [PATCH v3 2/2] hw/arm: Add the romfile compatatibility

Quoted 28 lines · Peter Maydell
Quoted 27 lines · Shaoqin Huang

On arm64, it doesn't use the vgabios-ramfb.bin, so set the property "use-legacy-x86-rom" to false, thus the ramfb won't load the vgabios-ramfb.bin.

This can mitigate the problem that on release version the qemu can't find the vgabios-ramfb.bin if it use the ramfb.

---
 hw/arm/virt.c | 3 +++
 1 file changed, 3 insertions(+)
hw/arm/virt.c +1 -0
index a96452f17a..5f94f7a2ca 100644
@@ -38,6 +38,7 @@
 #include "hw/arm/primecell.h"
 #include "hw/arm/virt.h"
 #include "hw/block/flash.h"
+#include "hw/vfio/pci.h"
 #include "hw/vfio/vfio-calxeda-xgmac.h"
 #include "hw/vfio/vfio-amd-xgbe.h"
 #include "hw/display/ramfb.h"
@@ -90,6 +91,8 @@
 
Quoted 11 lines

hw/arm/virt.c line 95

Quoted 4 lines
hw/arm/virt.c +2 -0
 static GlobalProperty arm_virt_compat[] = {
     { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "48" },
+    { TYPE_RAMFB_DEVICE, "use-legacy-x86-rom", "false" },
+    { TYPE_VFIO_PCI, "use-legacy-x86-rom", "false" },

I think we should find a way to make this default to "false" and only be set "true" for x86. Otherwise every single non-x86 board that ever adds support for ramfb and virtio will have to add these two lines, which is a source of future bugs. (Whereas if you forget to mark a new x86 board as needing the legacy rom you'll find out about it pretty quickly.)

Yes, going forward we this to default to true only on x86.

For non-x86, historical versioned machine types will need likely it set to true, in order to avoid the memory layout being changed IIUC.

With regards,
Daniel

Signature · 3 lines
|: https://berrange.com      -o-    https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org         -o-            https://fstop138.berrange.com :|
|: https://entangle-photo.org    -o-    https://www.instagram.com/dberrange :|
#8 lore raw

Re: [PATCH v3 2/2] hw/arm: Add the romfile compatatibility

Quoted 41 lines · Daniel P. Berrangé
Quoted 28 lines · Peter Maydell
Quoted 27 lines · Shaoqin Huang

On arm64, it doesn't use the vgabios-ramfb.bin, so set the property "use-legacy-x86-rom" to false, thus the ramfb won't load the vgabios-ramfb.bin.

This can mitigate the problem that on release version the qemu can't find the vgabios-ramfb.bin if it use the ramfb.

---
  hw/arm/virt.c | 3 +++
  1 file changed, 3 insertions(+)
hw/arm/virt.c +1 -0
index a96452f17a..5f94f7a2ca 100644
@@ -38,6 +38,7 @@
  #include "hw/arm/primecell.h"
  #include "hw/arm/virt.h"
  #include "hw/block/flash.h"
+#include "hw/vfio/pci.h"
  #include "hw/vfio/vfio-calxeda-xgmac.h"
  #include "hw/vfio/vfio-amd-xgbe.h"
  #include "hw/display/ramfb.h"
@@ -90,6 +91,8 @@
 
Quoted 11 lines

hw/arm/virt.c line 95

Quoted 4 lines
hw/arm/virt.c +2 -0
  static GlobalProperty arm_virt_compat[] = {
      { TYPE_VIRTIO_IOMMU_PCI, "aw-bits", "48" },
+    { TYPE_RAMFB_DEVICE, "use-legacy-x86-rom", "false" },
+    { TYPE_VFIO_PCI, "use-legacy-x86-rom", "false" },

I think we should find a way to make this default to "false" and only be set "true" for x86. Otherwise every single non-x86 board that ever adds support for ramfb and virtio will have to add these two lines, which is a source of future bugs. (Whereas if you forget to mark a new x86 board as needing the legacy rom you'll find out about it pretty quickly.)

Quoted 5 lines

Yes, going forward we this to default to true only on x86.

For non-x86, historical versioned machine types will need likely it set to true, in order to avoid the memory layout being changed IIUC.

Ok, I will set this to be true by default only on x86.

Thanks,
Shaoqin

Quoted 4 lines

With regards,
Daniel

Signature · 1 line
Shaoqin