Skip to contentSkip to conversation

X1E Asus Zenbook A14 support

PATCH In review Aleksandrs Vinarskis 2 participants 3 messages Jun 14, 2025 – Jun 15, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v7 cover X1E Asus Zenbook A14 support

As requested, 1/4 was merged to linux-next by USB maintainers. Resending 4/4 rebased on top of latest linux-next. 2/4, 3/4 already landed.

With this in mind, and taking into account that this patch was already reviewed some time ago, any possibility to still add 4/4 to 6.16?

---

Introduce support for the mentioned laptop.

Particular device exists in two model numbers:
* UX3407QA: X1P-42-100 or X1-26-100 (as tested)
* UX3407RA: X1E-78-100

Mostly similar to other X1-based laptops. Notable differences are:
* Wifi/Bluetooth combo being Qualcomm FastConnect 6900 on UX3407QA and Qualcomm FastConnect 7800 on UX3407RA
* USB Type-C retimers are Parade PS8833, appear to behave identical to Parade PS8830
* gpio90 is TZ protected

When comparing device firmware between UX3407QA, UX3407RA, it seems that only ADSP firmware is different, CDSP and GPU firmware appears to be the same. (At least assuming the GPU firmware name in both cases is qcdxkmsuc8380.mbn). Since at least some blobs are different betweeen X1E and X1/X1P, define new firmware directory for qcom/x1p42100. This also makes it easier for distros to automatically extract firmware from Windows and place all blobs for the model under the same path. If/When firmware blobs make it to linux-firmware, same blobs can be easily symlinked between qcom/x1e80100 and qcom/x1p42100.

NVMe SSD depends on [1]. USB Type-A over USB MP controller depends on [2], or equivalent proposed solution.

Qualcomm FastConnect 6900 on UX3407QA did not work out of the box, and additionally required both newer firmware and patches to board-2.bin. I added a short how-to [3], as it is not exactly trivial.

ACPI dumps can be found on aarch64-laptops' github [4]. HWids on dtbloader's github [5].

[1] https://lore.kernel.org/linux-arm-msm/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
[3] https://github.com/alexVinarskis/linux-x1e80100-zenbook-a14?tab=readme-ov-file#wcn688x-wifi
[4] https://github.com/aarch64-laptops/build/pull/134/files
[5] https://github.com/TravMurav/dtbloader/pull/4/files
[6] https://lore.kernel.org/all/20250429-x1e80100-dts-drop-useless-dp-compatible-override-v1-0-058847814d70@linaro.org/
[7] https://lore.kernel.org/all/[email protected]/

Changes to v6:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on next-20250612
* Fixed zap_shader to &gpu_zap_shader
Link to v6: https://lore.kernel.org/all/[email protected]/

Changes to v5:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on next-20250606
* Moved gpu enable from dtsi to respective dts as per discussion in [7] Link to v5: https://lore.kernel.org/all/[email protected]/

Changes to v4:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on for-next of qcom tree, adjust makefile to generate el2 dtbs
* Picked Konrad's R-by for 4/4
* Droped 'qcom,x1e80100-dp' as per [6]
Link to v4: https://lore.kernel.org/all/[email protected]/

Changes to v3:
* Drop redundant comments
* Drop incomplete wcn7850 as it is causing dt errors
* Picked a-by
Link to v3: https://lore.kernel.org/all/[email protected]/

Changes to v2:
* Fix/re-add PS8833 as fallback
* Add EC's i2c address
* Add pwrseq for wcn6855, placeholder for wcn7850 until its tested
* Rename x1-zenbook.dtsi to x1-asus-zenbook.dtsi
Link to v2: https://lore.kernel.org/all/[email protected]/

Changes to v1:
* Drop PS8833 variant, fallback to PS8830 as they behave the same
* Drop wrong pcie6a_phy compatible revert
* Drop redundant comments, fix order of properties in the device-tree
* Fix device name bindings, express in model names instead of the soc
* Fix GPU firmware name for UX3407QA
* Fix model string, enclose variant in parenthesis
* Added missing new lines before 'status = "okay";'
* Updated cover letter to reflect some of the above changes
* Left SPI10 disabled as it is unknown how/what for to use it as of now Link to v1: https://lore.kernel.org/all/[email protected]/

Aleksandrs Vinarskis (1):
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14

 arch/arm64/boot/dts/qcom/Makefile             |    4 +
 .../boot/dts/qcom/x1-asus-zenbook-a14.dtsi    | 1302 +++++++++++++++++
 .../dts/qcom/x1e80100-asus-zenbook-a14.dts    |   37 +
 .../dts/qcom/x1p42100-asus-zenbook-a14.dts    |  141 ++
 4 files changed, 1484 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
 create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
Signature · 1 line
2.45.2
#1 lore raw

PATCH v7 4/4 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14

Initial support for Asus Zenbook A14. Particular moddel exists in X1-26-100, X1P-42-100 (UX3407QA) and X1E-78-100 (UX3407RA).

Mostly similar to other X1-based laptops. Notable differences are:
* Wifi/Bluetooth combo being Qualcomm FastConnect 6900 on UX3407QA and Qualcomm FastConnect 7800 on UX3407RA
* USB Type-C retimers are Parade PS8833, appear to behave identical to Parade PS8830
* gpio90 is TZ protected

Working:
* Keyboard
* Touchpad
* NVME
* Lid switch
* Camera LED
* eDP (FHD OLED, SDC420D) with brightness control
* Bluetooth, WiFi (WCN6855)
* USB Type-A port
* USB Type-C ports in USB2/USB3/DP (both orientations)
* aDSP/cDPS firmware loading, battery info
* Sleep/suspend, nothing visibly broken on resume

Out of scope of this series:
* Audio (Speakers/microphones/headphone jack)
* Camera (OmniVision OV02C10)
* HDMI (Parade PS185HDM)
* EC

Add dtsi and create two configurations for UX3407QA, UX3407RA. Tested on UX3407QA with X1-26-100.

---
 arch/arm64/boot/dts/qcom/Makefile             |    4 +
 .../boot/dts/qcom/x1-asus-zenbook-a14.dtsi    | 1302 +++++++++++++++++
 .../dts/qcom/x1e80100-asus-zenbook-a14.dts    |   37 +
 .../dts/qcom/x1p42100-asus-zenbook-a14.dts    |  141 ++
 4 files changed, 1484 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
 create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
arch/arm64/boot/dts/qcom/Makefile +4 -0
index 669b888b27a1..06aca925e528 100644
@@ -309,6 +309,8 @@ x1e78100-lenovo-thinkpad-t14s-oled-el2-dtbs	:= x1e78100-lenovo-thinkpad-t14s-ole
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s-oled.dtb x1e78100-lenovo-thinkpad-t14s-oled-el2.dtb
 x1e80100-asus-vivobook-s15-el2-dtbs	:= x1e80100-asus-vivobook-s15.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb x1e80100-asus-vivobook-s15-el2.dtb
+x1e80100-asus-zenbook-a14-el2-dtbs	:= x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
 x1e80100-crd-el2-dtbs	:= x1e80100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb x1e80100-crd-el2.dtb
 x1e80100-dell-xps13-9345-el2-dtbs	:= x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
@@ -325,5 +327,7 @@ x1e80100-microsoft-romulus15-el2-dtbs	:= x1e80100-microsoft-romulus15.dtb x1-el2
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-microsoft-romulus15.dtb x1e80100-microsoft-romulus15-el2.dtb
 x1e80100-qcp-el2-dtbs	:= x1e80100-qcp.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-qcp.dtb x1e80100-qcp-el2.dtb
+x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
 x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi new file +1302 -0

1,302 lines not on this page · raw message

arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts new file +37 -0
new file mode 100644
index 000000000000..0d0bcc50207d
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2025 Aleksandrs Vinarskis <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-asus-zenbook-a14.dtsi"
+
+/ {
+	model = "ASUS Zenbook A14 (UX3407RA)";
+	compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qccdsp8380.mbn",
+			"qcom/x1e80100/ASUSTeK/zenbook-a14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts new file +141 -0

141 lines not on this page · raw message

Signature · 1 line
2.45.2
#2 lore raw
In reply to Aleksandrs Vinarskis
Quoted 8 lines · Aleksandrs Vinarskis

As requested, 1/4 was merged to linux-next by USB maintainers. Resending 4/4 rebased on top of latest linux-next. 2/4, 3/4 already landed.

With this in mind, and taking into account that this patch was already reviewed some time ago, any possibility to still add 4/4 to 6.16?

No, 6.16 is in the -rc stage, which means no new material going in.

Quoted 103 lines

---

Introduce support for the mentioned laptop.

Particular device exists in two model numbers:
* UX3407QA: X1P-42-100 or X1-26-100 (as tested)
* UX3407RA: X1E-78-100

Mostly similar to other X1-based laptops. Notable differences are:
* Wifi/Bluetooth combo being Qualcomm FastConnect 6900 on UX3407QA and Qualcomm FastConnect 7800 on UX3407RA
* USB Type-C retimers are Parade PS8833, appear to behave identical to Parade PS8830
* gpio90 is TZ protected

When comparing device firmware between UX3407QA, UX3407RA, it seems that only ADSP firmware is different, CDSP and GPU firmware appears to be the same. (At least assuming the GPU firmware name in both cases is qcdxkmsuc8380.mbn). Since at least some blobs are different betweeen X1E and X1/X1P, define new firmware directory for qcom/x1p42100. This also makes it easier for distros to automatically extract firmware from Windows and place all blobs for the model under the same path. If/When firmware blobs make it to linux-firmware, same blobs can be easily symlinked between qcom/x1e80100 and qcom/x1p42100.

NVMe SSD depends on [1]. USB Type-A over USB MP controller depends on [2], or equivalent proposed solution.

Qualcomm FastConnect 6900 on UX3407QA did not work out of the box, and additionally required both newer firmware and patches to board-2.bin. I added a short how-to [3], as it is not exactly trivial.

ACPI dumps can be found on aarch64-laptops' github [4]. HWids on dtbloader's github [5].

[1] https://lore.kernel.org/linux-arm-msm/[email protected]/
[2] https://lore.kernel.org/all/[email protected]/
[3] https://github.com/alexVinarskis/linux-x1e80100-zenbook-a14?tab=readme-ov-file#wcn688x-wifi
[4] https://github.com/aarch64-laptops/build/pull/134/files
[5] https://github.com/TravMurav/dtbloader/pull/4/files
[6] https://lore.kernel.org/all/20250429-x1e80100-dts-drop-useless-dp-compatible-override-v1-0-058847814d70@linaro.org/
[7] https://lore.kernel.org/all/[email protected]/

Changes to v6:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on next-20250612
* Fixed zap_shader to &gpu_zap_shader
Link to v6: https://lore.kernel.org/all/[email protected]/

Changes to v5:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on next-20250606
* Moved gpu enable from dtsi to respective dts as per discussion in [7] Link to v5: https://lore.kernel.org/all/[email protected]/

Changes to v4:
* _Only sending 4/4 as other patches are already applied_
* Rebase 4/4 on for-next of qcom tree, adjust makefile to generate el2 dtbs
* Picked Konrad's R-by for 4/4
* Droped 'qcom,x1e80100-dp' as per [6]
Link to v4: https://lore.kernel.org/all/[email protected]/

Changes to v3:
* Drop redundant comments
* Drop incomplete wcn7850 as it is causing dt errors
* Picked a-by
Link to v3: https://lore.kernel.org/all/[email protected]/

Changes to v2:
* Fix/re-add PS8833 as fallback
* Add EC's i2c address
* Add pwrseq for wcn6855, placeholder for wcn7850 until its tested
* Rename x1-zenbook.dtsi to x1-asus-zenbook.dtsi
Link to v2: https://lore.kernel.org/all/[email protected]/

Changes to v1:
* Drop PS8833 variant, fallback to PS8830 as they behave the same
* Drop wrong pcie6a_phy compatible revert
* Drop redundant comments, fix order of properties in the device-tree
* Fix device name bindings, express in model names instead of the soc
* Fix GPU firmware name for UX3407QA
* Fix model string, enclose variant in parenthesis
* Added missing new lines before 'status = "okay";'
* Updated cover letter to reflect some of the above changes
* Left SPI10 disabled as it is unknown how/what for to use it as of now Link to v1: https://lore.kernel.org/all/[email protected]/

Aleksandrs Vinarskis (1):
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14

 arch/arm64/boot/dts/qcom/Makefile             |    4 +
 .../boot/dts/qcom/x1-asus-zenbook-a14.dtsi    | 1302 +++++++++++++++++
 .../dts/qcom/x1e80100-asus-zenbook-a14.dts    |   37 +
 .../dts/qcom/x1p42100-asus-zenbook-a14.dts    |  141 ++
 4 files changed, 1484 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts
 create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-asus-zenbook-a14.dts
Signature · 1 line
2.45.2
Signature · 2 lines
With best wishes
Dmitry