Skip to contentSkip to conversation

drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support

PATCH In review LiangCheng Wang 3 participants 18 messages Jun 18, 2025 – Jun 20, 2025

Subsystems (4)
lore
Share & tools
lore

LiangCheng Wang

author maintainer
#0 lore raw

cover drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support

This series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.

Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.

Tested on PIXPAPER hardware with linux-5.10.y-cip, verifying display initialization and refresh. All patches pass checkpatch.pl.

--

LiangCheng Wang (2):
drm: tiny: Add support for PIXPAPER e-ink panel
dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Wig Cheng (1):
dt-bindings: vendor-prefixes: Add Mayqueen name

 .../bindings/display/mayqueen,pixpaper.yaml   |  67 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/gpu/drm/tiny/Kconfig                  |  11 +
 drivers/gpu/drm/tiny/Makefile                 |   1 +
 drivers/gpu/drm/tiny/pixpaper.c               | 716 ++++++++++++++++++
 6 files changed, 803 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
 create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH 1/3 dt-bindings: vendor-prefixes: Add Mayqueen name

From: Wig Cheng <[email protected]>

Mayqueen is a Taiwan-based company primarily focused on the development of arm64 development boards and e-paper displays.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 2735be1a8..8434ae355 100644
@@ -631,6 +631,8 @@ patternProperties:
     description: MaxBotix Inc.
   "^maxim,.*":
     description: Maxim Integrated Products
+  "^mayqueen,.*":
+    description: Mayqueen Technologies Ltd.
   "^mbvl,.*":
     description: Mobiveil Inc.
   "^mcube,.*":
Signature · 1 line
2.34.1
author maintainer
#3 lore raw

PATCH 2/3 drm: tiny: Add support for PIXPAPER e-ink panel

In reply to LiangCheng Wang

Introduce a DRM driver for the PIXPAPER e-ink display panel, which is controlled via SPI. The driver supports a 122x250 resolution display with XRGB8888 format, using the DRM simple KMS helper framework.

---
 MAINTAINERS                     |   6 +
 drivers/gpu/drm/tiny/Kconfig    |  11 +
 drivers/gpu/drm/tiny/Makefile   |   1 +
 drivers/gpu/drm/tiny/pixpaper.c | 716 ++++++++++++++++++++++++++++++++
 4 files changed, 734 insertions(+)
 create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
MAINTAINERS +6 -0
index 66c628761..aac32556a 100644
@@ -5534,6 +5534,12 @@ S:	Orphan / Obsolete
 F:	drivers/gpu/drm/i810/
 F:	include/uapi/drm/i810_drm.h
 
+DRM DRIVER FOR PIXPAPER E-INK PANEL
+M:	LiangCheng Wang <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
+F:	drivers/gpu/drm/tiny/pixpaper.c
+
 DRM DRIVER FOR LVDS PANELS
 M:	Laurent Pinchart <[email protected]>
 L:	[email protected]
drivers/gpu/drm/tiny/Kconfig +11 -0
index 2b6414f0f..922753489 100644
@@ -131,3 +131,14 @@ config TINYDRM_ST7735R
 	  * Okaya RH128128T 1.44" 128x128 TFT
 
 	  If M is selected the module will be called st7735r.
+
+config DRM_PIXPAPER
+    tristate "DRM support for PIXPAPER display panels"
+    depends on DRM && SPI
+    select DRM_KMS_HELPER
+    select DRM_KMS_CMA_HELPER
+    help
+      DRM driver for the following PIXPAPER panels
+
+      If M is selected the module will be called pixpaper .
+
drivers/gpu/drm/tiny/Makefile +1 -0
index 6ae4e9e5a..4b9e473ba 100644
@@ -10,3 +10,4 @@ obj-$(CONFIG_TINYDRM_MI0283QT)		+= mi0283qt.o
 obj-$(CONFIG_TINYDRM_REPAPER)		+= repaper.o
 obj-$(CONFIG_TINYDRM_ST7586)		+= st7586.o
 obj-$(CONFIG_TINYDRM_ST7735R)		+= st7735r.o
+obj-$(CONFIG_DRM_PIXPAPER)			+= pixpaper.o
drivers/gpu/drm/tiny/pixpaper.c new file +716 -0

716 lines not on this page · raw message

Signature · 1 line
2.34.1
author maintainer
#4 lore raw

PATCH 3/3 dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

In reply to LiangCheng Wang

The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.

---
 .../bindings/display/mayqueen,pixpaper.yaml   | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +67 -0
new file mode 100644
index 000000000..f7c33957e
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAYQUEEN PIXPAPER e-ink display panel
+
+maintainers:
+  - LC Wang <[email protected]>
+
+description: |
+  The PIXPAPER is an e-ink display panel controlled via an SPI interface.
+  The panel has a resolution of 122x250 pixels and requires GPIO pins for
+  reset, busy, and data/command control.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+    description: SPI chip select number for the device.
+
+  spi-max-frequency:
+    default: 1000000
+    description: Maximum SPI clock frequency in Hz.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO for the panel reset pin.
+
+  busy-gpios:
+    maxItems: 1
+    description: GPIO for the panel busy pin.
+
+  dc-gpios:
+    maxItems: 1
+    description: GPIO for the data/command pin.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - busy-gpios
+  - dc-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        display@0 {
+            compatible = "mayqueen,pixpaper";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
Signature · 1 line
2.34.1
#5 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Quoted 35 lines · LiangCheng Wang

The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.

---
 .../bindings/display/mayqueen,pixpaper.yaml   | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +20 -0
new file mode 100644
index 000000000..f7c33957e
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAYQUEEN PIXPAPER e-ink display panel
+
+maintainers:
+  - LC Wang <[email protected]>
+
+description: |
+  The PIXPAPER is an e-ink display panel controlled via an SPI interface.
+  The panel has a resolution of 122x250 pixels and requires GPIO pins for
+  reset, busy, and data/command control.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:

Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30

Quoted 10 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +10 -0
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+    description: SPI chip select number for the device.
+
+  spi-max-frequency:
+    default: 1000000
+    description: Maximum SPI clock frequency in Hz.

Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.

Quoted 41 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +37 -0
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO for the panel reset pin.
+
+  busy-gpios:
+    maxItems: 1
+    description: GPIO for the panel busy pin.
+
+  dc-gpios:
+    maxItems: 1
+    description: GPIO for the data/command pin.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - busy-gpios
+  - dc-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        display@0 {
+            compatible = "mayqueen,pixpaper";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
Signature · 1 line
2.34.1
#6 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Quoted 8 lines · Conor Dooley
Quoted 8 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +8 -0
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+    description: SPI chip select number for the device.
Quoted 9 lines

Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30

Quoted 4 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +4 -0
+
+  spi-max-frequency:
+    default: 1000000
+    description: Maximum SPI clock frequency in Hz.

Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.

Have in mind this is a duplicated thread - same stuff was sent two times leading to duplicated discussion:

https://lore.kernel.org/all/?q=f%3Azaq14760%40gmail.com

Best regards,
Krzysztof

#7 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Quoted 19 lines · Krzysztof Kozlowski
Quoted 8 lines · Conor Dooley
Quoted 8 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +8 -0
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+    description: SPI chip select number for the device.
Quoted 9 lines

Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30

Quoted 4 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +4 -0
+
+  spi-max-frequency:
+    default: 1000000
+    description: Maximum SPI clock frequency in Hz.

Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.

Quoted 4 lines

Have in mind this is a duplicated thread - same stuff was sent two times leading to duplicated discussion:

https://lore.kernel.org/all/?q=f%3Azaq14760%40gmail.com

Yeah, I saw the dupe but I deleted the wrong one and couldn't be bothered downloading the mbox for it.

author maintainer
#8 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

In reply to Conor Dooley

From: LiangCheng Wang <[email protected]>

Quoted 7 lines · Conor Dooley
Quoted 3 lines

spi-max-frequency:
default: 1000000
description: Maximum SPI clock frequency in Hz.

Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.

Quoted 14 lines · Krzysztof Kozlowski

Don't send multiple patches but version them correctly.

Quoted 1 line

title: MAYQUEEN PIXPAPER e-ink display panel

Don't capitalize all letters. Mayqueen Pixpaper or whatever it is really called.

Quoted 1 line

description: |

Do not need '|' unless you need to preserve formatting.

Quoted 3 lines

reg:
maxItems: 1
description: SPI chip select number for the device.

Quoted 6 lines

Drop description
[similarly for spi-max-frequency, reset-gpios, busy-gpios, dc-gpios]

Quoted 1 line

additionalProperties: false

unevaluatedProperties instead

Hi Conor, Krzysztof,

Thanks for your detailed reviews!

To Conor:
Regarding the spi-max-frequency property,
you’re correct that the display has a maximum supported SPI clock frequency.
The provided datasheet for the Pixpaper controller does not explicitly specify this value, but I’ve tested the panel on the RZ/V2H platform and found 1000000 Hz (1 MHz)
to be the most stable operating frequency.
The current binding’s default of 1 MHz reflects this tested configuration.
To ensure clarity and prevent misconfiguration,
I will update the binding to define a maximum: 1000000 constraint for spi-max-frequency in the YAML schema, pending further datasheet confirmation

To Krzysztof:
I'll make the following changes to the device tree bindings:
- Update the title to "Mayqueen Pixpaper e-ink display panel".
- Remove the '|' from the description.
- Drop redundant descriptions for reg, spi-max-frequency, reset-gpios, busy-gpios, and dc-gpios.
- Replace additionalProperties: false with unevaluatedProperties: false.

Best regards,
LiangCheng Wang

author maintainer
#9 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

In reply to Conor Dooley

From: LiangCheng Wang <[email protected]>

Quoted 7 lines · Conor Dooley
Quoted 3 lines

spi-max-frequency:
default: 1000000
description: Maximum SPI clock frequency in Hz.

Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.

Quoted 14 lines · Krzysztof Kozlowski

Don't send multiple patches but version them correctly.

Quoted 1 line

title: MAYQUEEN PIXPAPER e-ink display panel

Don't capitalize all letters. Mayqueen Pixpaper or whatever it is really called.

Quoted 1 line

description: |

Do not need '|' unless you need to preserve formatting.

Quoted 3 lines

reg:
maxItems: 1
description: SPI chip select number for the device.

Quoted 6 lines

Drop description
[similarly for spi-max-frequency, reset-gpios, busy-gpios, dc-gpios]

Quoted 1 line

additionalProperties: false

unevaluatedProperties instead

Hi Conor, Krzysztof,

Thanks for your detailed reviews!

To Conor:
Regarding the spi-max-frequency property,
you’re correct that the display has a maximum supported SPI clock frequency.
The provided datasheet for the Pixpaper controller does not explicitly specify this value, but I’ve tested the panel on the RZ/V2H platform and found 1000000 Hz (1 MHz)
to be the most stable operating frequency.
The current binding’s default of 1 MHz reflects this tested configuration.
To ensure clarity and prevent misconfiguration,
I will update the binding to define a maximum: 1000000 constraint for spi-max-frequency in the YAML schema, pending further datasheet confirmation

To Krzysztof:
I'll make the following changes to the device tree bindings:
- Update the title to "Mayqueen Pixpaper e-ink display panel".
- Remove the '|' from the description.
- Drop redundant descriptions for reg, spi-max-frequency, reset-gpios, busy-gpios, and dc-gpios.
- Replace additionalProperties: false with unevaluatedProperties: false.

Best regards,
LiangCheng Wang

author maintainer
#10 lore raw

PATCH 3/3 dt-bindings: display: Add Mayqueen Pixpaper e-ink panel

From: LiangCheng Wang <[email protected]>

The binding is for the Mayqueen Pixpaper e-ink display panel, controlled via an SPI interface.

Changes in v2:
- Corrected capitalization in the title.
- Removed unnecessary '|' from description.
- Removed redundant description lines for standard properties
- Added 'maximum: 1000000' for spi-max-frequency property definition
- Changed 'additionalProperties: false' to 'unevaluatedProperties: false'.

---
 .../bindings/display/mayqueen,pixpaper.yaml   | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +63 -0
new file mode 100644
index 000000000000..cd27f8ba5ae1
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mayqueen Pixpaper e-ink display panel
+
+maintainers:
+  - LiangCheng Wang <[email protected]>
+
+description:
+  The Pixpaper is an e-ink display panel controlled via an SPI interface.
+  The panel has a resolution of 122x250 pixels and requires GPIO pins for
+  reset, busy, and data/command control.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+    default: 1000000
+
+  reset-gpios:
+    maxItems: 1
+
+  busy-gpios:
+    maxItems: 1
+
+  dc-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - busy-gpios
+  - dc-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        display@0 {
+            compatible = "mayqueen,pixpaper";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
Signature · 1 line
2.34.1
#11 lore raw

Re: [PATCH 3/3] dt-bindings: display: Add Mayqueen Pixpaper e-ink panel

Quoted 6 lines · lcwang

From: LiangCheng Wang <[email protected]>

The binding is for the Mayqueen Pixpaper e-ink display panel, controlled via an SPI interface.

Changes in v2:

This goes to changelog.

Please version your patches correctly, e.g. use b4 or git format-patch -vX, and add changelog in cover letter or under '---' of individual patches describing changes from previous version.

Just look at other patches on the list.

Best regards,
Krzysztof

author maintainer
#12 lore raw

v2 cover drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support

In reply to lcwang

This series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.

Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.

Tested on PIXPAPER hardware with linux-5.10.y-cip, verifying display initialization and refresh. All patches pass checkpatch.pl.

--

LiangCheng Wang (2):
drm: tiny: Add support for PIXPAPER e-ink panel
dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Wig Cheng (1):
dt-bindings: vendor-prefixes: Add Mayqueen name

Changes in v2:
- Corrected capitalization in the title.
- Removed unnecessary '|' from description.
- Removed redundant description lines for standard properties
- Added 'maximum: 1000000' for spi-max-frequency property definition
- Changed 'additionalProperties: false' to 'unevaluatedProperties: false'

 .../bindings/display/mayqueen,pixpaper.yaml   |  67 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/gpu/drm/tiny/Kconfig                  |  11 +
 drivers/gpu/drm/tiny/Makefile                 |   1 +
 drivers/gpu/drm/tiny/pixpaper.c               | 716 ++++++++++++++++++
 6 files changed, 803 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
 create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
Signature · 1 line
2.34.1
#13 lore raw
Quoted 9 lines · LiangCheng Wang

This series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.

Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.

Tested on PIXPAPER hardware with linux-5.10.y-cip,

So this explains incorrect Cc list. Your emails keep bouncing and you do not even cared enough to fix it.

No, don't work on ancient 5.10 kernels. This is so ancient it should have never been used (regardless of what CIP tells you).

Using v5.10 kernel as starting point for your driver means you probably replicated all the style issues, all the bugs we already fixed.

This must be developed on latest kernel. You must take latest reviewed drivers as your template.

Then test it on latest kernel, not CIP!

Then send it from latest kernel, so you will get CC list right.

Best regards,
Krzysztof

author maintainer
#14 lore raw

PATCH v2 3/3 dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

In reply to lcwang

The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.

---
 .../bindings/display/mayqueen,pixpaper.yaml   | 63 +++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +63 -0
new file mode 100644
index 000000000000..dd7a84dea147
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mayqueen Pixpaper e-ink display panel
+
+maintainers:
+  - LC Wang <[email protected]>
+
+description:
+  The Pixpaper is an e-ink display panel controlled via an SPI interface.
+  The panel has a resolution of 122x250 pixels and requires GPIO pins for
+  reset, busy, and data/command control.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+    default: 1000000
+
+  reset-gpios:
+    maxItems: 1
+
+  busy-gpios:
+    maxItems: 1
+
+  dc-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - busy-gpios
+  - dc-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        display@0 {
+            compatible = "mayqueen,pixpaper";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
Signature · 1 line
2.34.1
#15 lore raw

Re: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Quoted 5 lines · LiangCheng Wang

The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.

---

<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC (and consider --no-git-fallback argument, so you will not CC people just because they made one commit years ago). It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.
</form letter>

Important from above:

"ancient tree (don't, instead use mainline) or work on fork of kernel"

That's exactly what you did.

Best regards,
Krzysztof

author maintainer
#16 lore raw

Re: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Dear Krzysztof,

Thank you very much for your review and feedback.
I sincerely apologize for the issue with my emails bouncing.
As a newcomer to using git send-email, I was unaware of this problem, particularly because I did not receive any bounce notifications in my Gmail inbox or spam folder. This made it difficult for me to identify the issue promptly.

Following your advice, I am migrating my driver development to the latest kernel (e.g., v6.12) and will use the get_maintainer.pl script from that kernel to ensure the correct Cc list. I am also reviewing my git send-email configuration to prevent further email delivery issues.

Could you kindly provide more details about the email bounce issue, such as specific error messages, problematic recipient addresses, or any other relevant information?
This would help me pinpoint and resolve the issue more effectively.
Additionally, if you have any tips on configuring git send-email
or the patch submission process, I would greatly appreciate your guidance.

I apologize again for any inconvenience caused and look forward to your further advice.

Best regards,
LiangCheng Wang

#17 lore raw

Re: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel

Quoted 8 lines · LiangCheng Wang

Dear Krzysztof,

Thank you very much for your review and feedback.
I sincerely apologize for the issue with my emails bouncing.
As a newcomer to using git send-email, I was unaware of this problem, particularly because I did not receive any bounce notifications in my Gmail inbox or spam folder. This made it difficult for me to identify the issue promptly.

Quoted 7 lines

Following your advice, I am migrating my driver development to the latest kernel (e.g., v6.12) and will use the get_maintainer.pl script from that kernel to ensure the correct Cc list. I am also reviewing my git send-email configuration to prevent further email delivery issues.

Could you kindly provide more details about the email bounce issue, such as specific error messages, problematic recipient addresses, or any other relevant information?
This would help me pinpoint and resolve the issue more effectively.

Every email here bounces from non-existing drm list.

<[email protected]>: unknown user: "drm"

Quoted 3 lines

Additionally, if you have any tips on configuring git send-email or the patch submission process, I would greatly appreciate your guidance.

Best regards,
Krzysztof