drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support
LiangCheng Wang
maintainercover drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support
This series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.
Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.
Tested on PIXPAPER hardware with linux-5.10.y-cip, verifying display initialization and refresh. All patches pass checkpatch.pl.
--
LiangCheng Wang (2):
drm: tiny: Add support for PIXPAPER e-ink panel
dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Wig Cheng (1):
dt-bindings: vendor-prefixes: Add Mayqueen name
.../bindings/display/mayqueen,pixpaper.yaml | 67 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 6 + drivers/gpu/drm/tiny/Kconfig | 11 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/pixpaper.c | 716 ++++++++++++++++++ 6 files changed, 803 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
Signature · 1 line
2.34.1
LiangCheng Wang
maintainerPATCH 1/3 dt-bindings: vendor-prefixes: Add Mayqueen name
From: Wig Cheng <[email protected]>
Mayqueen is a Taiwan-based company primarily focused on the development of arm64 development boards and e-paper displays.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -631,6 +631,8 @@ patternProperties: description: MaxBotix Inc. "^maxim,.*": description: Maxim Integrated Products + "^mayqueen,.*": + description: Mayqueen Technologies Ltd. "^mbvl,.*": description: Mobiveil Inc. "^mcube,.*":
Signature · 1 line
2.34.1
Re: [PATCH 1/3] dt-bindings: vendor-prefixes: Add Mayqueen name
Quoted 6 lines · LiangCheng Wang
From: Wig Cheng <[email protected]>
Mayqueen is a Taiwan-based company primarily focused on the development of arm64 development boards and e-paper displays.
Signed-off-by Wig Cheng <[email protected]>
LiangCheng Wang
maintainerPATCH 2/3 drm: tiny: Add support for PIXPAPER e-ink panel
In reply to LiangCheng WangIntroduce a DRM driver for the PIXPAPER e-ink display panel, which is controlled via SPI. The driver supports a 122x250 resolution display with XRGB8888 format, using the DRM simple KMS helper framework.
--- MAINTAINERS | 6 + drivers/gpu/drm/tiny/Kconfig | 11 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/pixpaper.c | 716 ++++++++++++++++++++++++++++++++ 4 files changed, 734 insertions(+) create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
MAINTAINERS +6 -0
@@ -5534,6 +5534,12 @@ S: Orphan / Obsolete F: drivers/gpu/drm/i810/ F: include/uapi/drm/i810_drm.h +DRM DRIVER FOR PIXPAPER E-INK PANEL +M: LiangCheng Wang <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml +F: drivers/gpu/drm/tiny/pixpaper.c + DRM DRIVER FOR LVDS PANELS M: Laurent Pinchart <[email protected]> L: [email protected]
drivers/gpu/drm/tiny/Kconfig +11 -0
@@ -131,3 +131,14 @@ config TINYDRM_ST7735R * Okaya RH128128T 1.44" 128x128 TFT If M is selected the module will be called st7735r. + +config DRM_PIXPAPER + tristate "DRM support for PIXPAPER display panels" + depends on DRM && SPI + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + help + DRM driver for the following PIXPAPER panels + + If M is selected the module will be called pixpaper . +
drivers/gpu/drm/tiny/Makefile +1 -0
@@ -10,3 +10,4 @@ obj-$(CONFIG_TINYDRM_MI0283QT) += mi0283qt.o obj-$(CONFIG_TINYDRM_REPAPER) += repaper.o obj-$(CONFIG_TINYDRM_ST7586) += st7586.o obj-$(CONFIG_TINYDRM_ST7735R) += st7735r.o +obj-$(CONFIG_DRM_PIXPAPER) += pixpaper.o
drivers/gpu/drm/tiny/pixpaper.c new file +716 -0
716 lines not on this page · raw message
Signature · 1 line
2.34.1
LiangCheng Wang
maintainerPATCH 3/3 dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
In reply to LiangCheng WangThe binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.
--- .../bindings/display/mayqueen,pixpaper.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +67 -0
@@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAYQUEEN PIXPAPER e-ink display panel + +maintainers: + - LC Wang <[email protected]> + +description: | + The PIXPAPER is an e-ink display panel controlled via an SPI interface. + The panel has a resolution of 122x250 pixels and requires GPIO pins for + reset, busy, and data/command control. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + description: SPI chip select number for the device. + + spi-max-frequency: + default: 1000000 + description: Maximum SPI clock frequency in Hz. + + reset-gpios: + maxItems: 1 + description: GPIO for the panel reset pin. + + busy-gpios: + maxItems: 1 + description: GPIO for the panel busy pin. + + dc-gpios: + maxItems: 1 + description: GPIO for the data/command pin. + +required: + - compatible + - reg + - reset-gpios + - busy-gpios + - dc-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + display@0 { + compatible = "mayqueen,pixpaper"; + reg = <0>; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + }; + };
Signature · 1 line
2.34.1
Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Quoted 35 lines · LiangCheng Wang
The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.
Signed-off-by LiangCheng Wang <[email protected]>--- .../bindings/display/mayqueen,pixpaper.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yamlDocumentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +20
-0@@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAYQUEEN PIXPAPER e-ink display panel + +maintainers: + - LC Wang <[email protected]> + +description: | + The PIXPAPER is an e-ink display panel controlled via an SPI interface. + The panel has a resolution of 122x250 pixels and requires GPIO pins for + reset, busy, and data/command control. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties:
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30
Quoted 10 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +10
-0+ compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + description: SPI chip select number for the device. + + spi-max-frequency: + default: 1000000 + description: Maximum SPI clock frequency in Hz.
Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.
Quoted 41 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +37
-0+ + reset-gpios: + maxItems: 1 + description: GPIO for the panel reset pin. + + busy-gpios: + maxItems: 1 + description: GPIO for the panel busy pin. + + dc-gpios: + maxItems: 1 + description: GPIO for the data/command pin. + +required: + - compatible + - reg + - reset-gpios + - busy-gpios + - dc-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + display@0 { + compatible = "mayqueen,pixpaper"; + reg = <0>; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + }; + };Signature · 1 line
2.34.1
Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Quoted 8 lines · Conor Dooley
Quoted 8 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +8
-0+ +properties: + compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + description: SPI chip select number for the device.
Quoted 9 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30
Quoted 4 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +4
-0+ + spi-max-frequency: + default: 1000000 + description: Maximum SPI clock frequency in Hz.Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.
Have in mind this is a duplicated thread - same stuff was sent two times leading to duplicated discussion:
https://lore.kernel.org/all/?q=f%3Azaq14760%40gmail.com
Best regards,
Krzysztof
Re: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Quoted 19 lines · Krzysztof Kozlowski
Quoted 8 lines · Conor Dooley
Quoted 8 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +8
-0+ +properties: + compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + description: SPI chip select number for the device.Quoted 9 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml line 30
Quoted 4 lines
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +4
-0+ + spi-max-frequency: + default: 1000000 + description: Maximum SPI clock frequency in Hz.Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.
Quoted 4 lines
Have in mind this is a duplicated thread - same stuff was sent two times leading to duplicated discussion:
Yeah, I saw the dupe but I deleted the wrong one and couldn't be bothered downloading the mbox for it.
lcwang
maintainerRe: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
In reply to Conor DooleyFrom: LiangCheng Wang <[email protected]>
Quoted 7 lines · Conor Dooley
Quoted 3 lines
spi-max-frequency:
default: 1000000
description: Maximum SPI clock frequency in Hz.Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.
Quoted 14 lines · Krzysztof Kozlowski
Don't send multiple patches but version them correctly.
Quoted 1 line
title: MAYQUEEN PIXPAPER e-ink display panel
Don't capitalize all letters. Mayqueen Pixpaper or whatever it is really called.
Quoted 1 line
description: |
Do not need '|' unless you need to preserve formatting.
Quoted 3 lines
reg:
maxItems: 1
description: SPI chip select number for the device.
Quoted 6 lines
Drop description
[similarly for spi-max-frequency, reset-gpios, busy-gpios, dc-gpios]Quoted 1 line
additionalProperties: false
unevaluatedProperties instead
Hi Conor, Krzysztof,
Thanks for your detailed reviews!
To Conor:
Regarding the spi-max-frequency property,
you’re correct that the display has a maximum supported SPI clock frequency.
The provided datasheet for the Pixpaper controller does not explicitly specify this value, but I’ve tested the panel on the RZ/V2H platform and found 1000000 Hz (1 MHz)
to be the most stable operating frequency.
The current binding’s default of 1 MHz reflects this tested configuration.
To ensure clarity and prevent misconfiguration,
I will update the binding to define a maximum: 1000000 constraint for spi-max-frequency in the YAML schema, pending further datasheet confirmation
To Krzysztof:
I'll make the following changes to the device tree bindings:
- Update the title to "Mayqueen Pixpaper e-ink display panel".
- Remove the '|' from the description.
- Drop redundant descriptions for reg, spi-max-frequency, reset-gpios, busy-gpios, and dc-gpios.
- Replace additionalProperties: false with unevaluatedProperties: false.
Best regards,
LiangCheng Wang
lcwang
maintainerRe: [PATCH 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
In reply to Conor DooleyFrom: LiangCheng Wang <[email protected]>
Quoted 7 lines · Conor Dooley
Quoted 3 lines
spi-max-frequency:
default: 1000000
description: Maximum SPI clock frequency in Hz.Does this actually not have a max?
The display surely has a maximum supported frequency, which might be lowered based on the board it is connected to.
Quoted 14 lines · Krzysztof Kozlowski
Don't send multiple patches but version them correctly.
Quoted 1 line
title: MAYQUEEN PIXPAPER e-ink display panel
Don't capitalize all letters. Mayqueen Pixpaper or whatever it is really called.
Quoted 1 line
description: |
Do not need '|' unless you need to preserve formatting.
Quoted 3 lines
reg:
maxItems: 1
description: SPI chip select number for the device.
Quoted 6 lines
Drop description
[similarly for spi-max-frequency, reset-gpios, busy-gpios, dc-gpios]Quoted 1 line
additionalProperties: false
unevaluatedProperties instead
Hi Conor, Krzysztof,
Thanks for your detailed reviews!
To Conor:
Regarding the spi-max-frequency property,
you’re correct that the display has a maximum supported SPI clock frequency.
The provided datasheet for the Pixpaper controller does not explicitly specify this value, but I’ve tested the panel on the RZ/V2H platform and found 1000000 Hz (1 MHz)
to be the most stable operating frequency.
The current binding’s default of 1 MHz reflects this tested configuration.
To ensure clarity and prevent misconfiguration,
I will update the binding to define a maximum: 1000000 constraint for spi-max-frequency in the YAML schema, pending further datasheet confirmation
To Krzysztof:
I'll make the following changes to the device tree bindings:
- Update the title to "Mayqueen Pixpaper e-ink display panel".
- Remove the '|' from the description.
- Drop redundant descriptions for reg, spi-max-frequency, reset-gpios, busy-gpios, and dc-gpios.
- Replace additionalProperties: false with unevaluatedProperties: false.
Best regards,
LiangCheng Wang
lcwang
maintainerPATCH 3/3 dt-bindings: display: Add Mayqueen Pixpaper e-ink panel
From: LiangCheng Wang <[email protected]>
The binding is for the Mayqueen Pixpaper e-ink display panel, controlled via an SPI interface.
Changes in v2:
- Corrected capitalization in the title.
- Removed unnecessary '|' from description.
- Removed redundant description lines for standard properties
- Added 'maximum: 1000000' for spi-max-frequency property definition
- Changed 'additionalProperties: false' to 'unevaluatedProperties: false'.
--- .../bindings/display/mayqueen,pixpaper.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +63 -0
@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mayqueen Pixpaper e-ink display panel + +maintainers: + - LiangCheng Wang <[email protected]> + +description: + The Pixpaper is an e-ink display panel controlled via an SPI interface. + The panel has a resolution of 122x250 pixels and requires GPIO pins for + reset, busy, and data/command control. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + default: 1000000 + + reset-gpios: + maxItems: 1 + + busy-gpios: + maxItems: 1 + + dc-gpios: + maxItems: 1 + +required: + - compatible + - reg + - reset-gpios + - busy-gpios + - dc-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + display@0 { + compatible = "mayqueen,pixpaper"; + reg = <0>; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + }; + };
Signature · 1 line
2.34.1
Re: [PATCH 3/3] dt-bindings: display: Add Mayqueen Pixpaper e-ink panel
Quoted 6 lines · lcwang
From: LiangCheng Wang <[email protected]>
The binding is for the Mayqueen Pixpaper e-ink display panel, controlled via an SPI interface.
Changes in v2:
This goes to changelog.
Please version your patches correctly, e.g. use b4 or git format-patch -vX, and add changelog in cover letter or under '---' of individual patches describing changes from previous version.
Just look at other patches on the list.
Best regards,
Krzysztof
LiangCheng Wang
maintainerv2 cover drm/tiny: Add MAYQUEEN PIXPAPER e-ink panel support
In reply to lcwangThis series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.
Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.
Tested on PIXPAPER hardware with linux-5.10.y-cip, verifying display initialization and refresh. All patches pass checkpatch.pl.
--
LiangCheng Wang (2):
drm: tiny: Add support for PIXPAPER e-ink panel
dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Wig Cheng (1):
dt-bindings: vendor-prefixes: Add Mayqueen name
Changes in v2:
- Corrected capitalization in the title.
- Removed unnecessary '|' from description.
- Removed redundant description lines for standard properties
- Added 'maximum: 1000000' for spi-max-frequency property definition
- Changed 'additionalProperties: false' to 'unevaluatedProperties: false'
.../bindings/display/mayqueen,pixpaper.yaml | 67 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 6 + drivers/gpu/drm/tiny/Kconfig | 11 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/pixpaper.c | 716 ++++++++++++++++++ 6 files changed, 803 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml create mode 100644 drivers/gpu/drm/tiny/pixpaper.c
Signature · 1 line
2.34.1
Quoted 9 lines · LiangCheng Wang
This series adds support for the MAYQUEEN PIXPAPER e-ink panel (122x250 pixels, SPI-controlled) to the tiny drm subsystem.
Patches (must be applied in order due to dependencies):
Patch 1/3: Adds 'mayqueen' vendor prefix. Patch 2/3: Implements PIXPAPER tiny drm driver. Patch 3/3: Adds PIXPAPER device tree bindings.Tested on PIXPAPER hardware with linux-5.10.y-cip,
So this explains incorrect Cc list. Your emails keep bouncing and you do not even cared enough to fix it.
No, don't work on ancient 5.10 kernels. This is so ancient it should have never been used (regardless of what CIP tells you).
Using v5.10 kernel as starting point for your driver means you probably replicated all the style issues, all the bugs we already fixed.
This must be developed on latest kernel. You must take latest reviewed drivers as your template.
Then test it on latest kernel, not CIP!
Then send it from latest kernel, so you will get CC list right.
Best regards,
Krzysztof
LiangCheng Wang
maintainerPATCH v2 3/3 dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
In reply to lcwangThe binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.
--- .../bindings/display/mayqueen,pixpaper.yaml | 63 +++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml new file +63 -0
@@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mayqueen Pixpaper e-ink display panel + +maintainers: + - LC Wang <[email protected]> + +description: + The Pixpaper is an e-ink display panel controlled via an SPI interface. + The panel has a resolution of 122x250 pixels and requires GPIO pins for + reset, busy, and data/command control. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + const: mayqueen,pixpaper + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + default: 1000000 + + reset-gpios: + maxItems: 1 + + busy-gpios: + maxItems: 1 + + dc-gpios: + maxItems: 1 + +required: + - compatible + - reg + - reset-gpios + - busy-gpios + - dc-gpios + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + display@0 { + compatible = "mayqueen,pixpaper"; + reg = <0>; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; + dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + }; + };
Signature · 1 line
2.34.1
Re: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Quoted 5 lines · LiangCheng Wang
The binding is for the MAYQUEEN PIXPAPER e-ink display panel, controlled via an SPI interface.
Signed-off-by LiangCheng Wang <[email protected]>---
<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC (and consider --no-git-fallback argument, so you will not CC people just because they made one commit years ago). It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.
</form letter>
Important from above:
"ancient tree (don't, instead use mainline) or work on fork of kernel"
That's exactly what you did.
Best regards,
Krzysztof
LiangCheng Wang
maintainerRe: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Dear Krzysztof,
Thank you very much for your review and feedback.
I sincerely apologize for the issue with my emails bouncing.
As a newcomer to using git send-email, I was unaware of this problem, particularly because I did not receive any bounce notifications in my Gmail inbox or spam folder. This made it difficult for me to identify the issue promptly.
Following your advice, I am migrating my driver development to the latest kernel (e.g., v6.12) and will use the get_maintainer.pl script from that kernel to ensure the correct Cc list. I am also reviewing my git send-email configuration to prevent further email delivery issues.
Could you kindly provide more details about the email bounce issue, such as specific error messages, problematic recipient addresses, or any other relevant information?
This would help me pinpoint and resolve the issue more effectively.
Additionally, if you have any tips on configuring git send-email
or the patch submission process, I would greatly appreciate your guidance.
I apologize again for any inconvenience caused and look forward to your further advice.
Best regards,
LiangCheng Wang
Re: [PATCH v2 3/3] dt-bindings: display: Add MAYQUEEN PIXPAPER e-ink panel
Quoted 8 lines · LiangCheng Wang
Dear Krzysztof,
Thank you very much for your review and feedback.
I sincerely apologize for the issue with my emails bouncing.
As a newcomer to usinggit send-email, I was unaware of this problem, particularly because I did not receive any bounce notifications in my Gmail inbox or spam folder. This made it difficult for me to identify the issue promptly.
Quoted 7 lines
Following your advice, I am migrating my driver development to the latest kernel (e.g., v6.12) and will use the
get_maintainer.plscript from that kernel to ensure the correct Cc list. I am also reviewing mygit send-emailconfiguration to prevent further email delivery issues.Could you kindly provide more details about the email bounce issue, such as specific error messages, problematic recipient addresses, or any other relevant information?
This would help me pinpoint and resolve the issue more effectively.
Every email here bounces from non-existing drm list.
<[email protected]>: unknown user: "drm"
Quoted 3 lines
Additionally, if you have any tips on configuring
git send-emailor the patch submission process, I would greatly appreciate your guidance.
Best regards,
Krzysztof