rework IRQ handling in mtk_eth_soc
Subsystems (4)
v6 cover rework IRQ handling in mtk_eth_soc
From: Frank Wunderlich <[email protected]>
This series introduces named IRQs while keeping the index based way for older dts.
Further it makes some cleanup like adding consts for index access and avoids loading first IRQ which was not used on non SHARED_INT SoCs.
changes:
v6:
- change irq names from tx/rx to fe1/fe2 because reserved irqs are usable and not bound to specific function
- dropped Simons RB because of this
- updated description of patch "skip first IRQ if not used" and use MTK_FE_IRQ_SHARED instead of 0 in condition too
- add "only use legacy mode on missing IRQ name" patch
v5:
- fixed typo in patch 1
- moved comments from previous patch #3 to patch #1 with changes suggested by simon
- rename consts to be compatible with upcoming RSS/LRO changes MTK_ETH_IRQ_SHARED => MTK_FE_IRQ_SHARED
MTK_ETH_IRQ_TX => MTK_FE_IRQ_TX
MTK_ETH_IRQ_RX => MTK_FE_IRQ_RX
MTK_ETH_IRQ_MAX => MTK_FE_IRQ_NUM
- change commit title and description in patch 3
v4:
- calculate max from last (rx) irq index and use it for array size too
- drop >2 condition as max is already 2 and drop the else continue
- update comment to explain which IRQs are taken in legacy way
v3:
added patches
- #2 (add constants for irq index)
- #3 (skip first IRQ on ! MTK_SHARED_INT)
to the v2 non-series patch
https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/
Tested on BPI-R4/mt7988 with IRQ names and BPI-R2/mt7623 and BPI-R3/mt7986 with upstreamed dts via index-mode.
I do not have any MTK_SHARED_INT (mt7621/mt7628) boards to testing.
Frank Wunderlich (4):
net: ethernet: mtk_eth_soc: support named IRQs
net: ethernet: mtk_eth_soc: add consts for irq index
net: ethernet: mtk_eth_soc: skip first IRQ if not used
net: ethernet: mtk_eth_soc: only use legacy mode on missing IRQ name
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 69 ++++++++++++++++----- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 7 ++- 2 files changed, 58 insertions(+), 18 deletions(-)
Signature · 1 line
2.43.0
PATCH v6 1/4 net: ethernet: mtk_eth_soc: support named IRQs
From: Frank Wunderlich <[email protected]>
Add named interrupts and keep index based fallback for existing devicetrees.
Currently only rx and tx IRQs are defined to be used with mt7988, but later extended with RSS/LRO support.
---
v6:
- change irq names from tx/rx to fe1/fe2 because reserved irqs are usable and not bound to specific function
- dropped Simons RB because of this
v5:
- fix typo in description
- add comments from previous patch #3 with changes suggested by simon
v2:
- move irqs loading part into own helper function
- reduce indentation
- place mtk_get_irqs helper before the irq_handler (note for simon)
net: mtk_eth_soc: change irq name back to fe1 + fe2
--- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 46 ++++++++++++++++----- 1 file changed, 35 insertions(+), 11 deletions(-)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +35 -11
@@ -3336,6 +3336,37 @@ static void mtk_tx_timeout(struct net_device *dev, unsigned int txqueue)schedule_work (ð->pending_work); } +static int mtk_get_irqs (struct platform_device *pdev,struct mtk_eth *eth) +{ +int i; + +/* future SoCs beginning with MT7988 should use named IRQs in dts */ + eth->irq[1 ] =platform_get_irq_byname (pdev,"fe1" ); + eth->irq[2 ] =platform_get_irq_byname (pdev,"fe2" ); +if (eth->irq[1 ] >=0 && eth->irq[2 ] >=0 ) +return 0 ; + +/* legacy way: +* On MTK_SHARED_INT SoCs (MT7621 + MT7628) the first IRQ is taken +* from devicetree and used for both RX and TX - it is shared. +* On SoCs with non-shared IRQs the first entry is not used, +* the second is for TX, and the third is for RX. +*/ +for (i =0 ; i <3 ; i++) { +if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT ) && i >0 ) + eth->irq[i] = eth->irq[0 ]; +else + eth->irq[i] =platform_get_irq (pdev, i); + +if (eth->irq[i] <0 ) { +dev_err (&pdev->dev,"no IRQ%d resource found\n" , i); +return -ENXIO ; + } + } + +return 0 ; +} +static irqreturn_t mtk_handle_irq_rx (int irq,void *_eth) {struct mtk_eth *eth = _eth;
@@ -5105,17 +5136,10 @@ static int mtk_probe(struct platform_device *pdev) } } -for (i =0 ; i <3 ; i++) { -if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT ) && i >0 ) - eth->irq[i] = eth->irq[0 ]; -else - eth->irq[i] =platform_get_irq (pdev, i); -if (eth->irq[i] <0 ) { -dev_err (&pdev->dev,"no IRQ%d resource found\n" , i); - err = -ENXIO ; - goto err_wed_exit; - } - } + err =mtk_get_irqs (pdev, eth); +if (err) + goto err_wed_exit; +for (i =0 ; i <ARRAY_SIZE (eth->clks); i++) { eth->clks[i] =devm_clk_get (eth->dev, mtk_clks_source_name[i]);
Signature · 1 line
2.43.0
Re: [net-next v6 1/4] net: ethernet: mtk_eth_soc: support named IRQs
Quoted 9 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
Add named interrupts and keep index based fallback for existing devicetrees.
Currently only rx and tx IRQs are defined to be used with mt7988, but later extended with RSS/LRO support.
Signed-off-by Frank Wunderlich <[email protected]>
PATCH v6 2/4 net: ethernet: mtk_eth_soc: add consts for irq index
In reply to Frank WunderlichFrom: Frank Wunderlich <[email protected]>
Use consts instead of fixed integers for accessing IRQ array.
---
v5:
- rename consts to be compatible with upcoming RSS/LRO changes MTK_ETH_IRQ_SHARED => MTK_FE_IRQ_SHARED
MTK_ETH_IRQ_TX => MTK_FE_IRQ_TX
MTK_ETH_IRQ_RX => MTK_FE_IRQ_RX
MTK_ETH_IRQ_MAX => MTK_FE_IRQ_NUM
v4:
- calculate max from last (rx) irq index and use it for array size too
--- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 22 ++++++++++----------- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 7 ++++++- 2 files changed, 17 insertions(+), 12 deletions(-)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +11 -11
@@ -3341,9 +3341,9 @@ static int mtk_get_irqs(struct platform_device *pdev, struct mtk_eth *eth)int i;/* future SoCs beginning with MT7988 should use named IRQs in dts */ - eth->irq[1 ] =platform_get_irq_byname (pdev,"fe1" ); - eth->irq[2 ] =platform_get_irq_byname (pdev,"fe2" ); -if (eth->irq[1 ] >=0 && eth->irq[2 ] >=0 ) + eth->irq[MTK_FE_IRQ_TX ] =platform_get_irq_byname (pdev,"fe1" ); + eth->irq[MTK_FE_IRQ_RX ] =platform_get_irq_byname (pdev,"fe2" ); +if (eth->irq[MTK_FE_IRQ_TX ] >=0 && eth->irq[MTK_FE_IRQ_RX ] >=0 )return 0 ;/* legacy way:
@@ -3352,9 +3352,9 @@ static int mtk_get_irqs(struct platform_device *pdev, struct mtk_eth *eth)* On SoCs with non-shared IRQs the first entry is not used, * the second is for TX, and the third is for RX. */ -for (i =0 ; i <3 ; i++) { +for (i =0 ; i <MTK_FE_IRQ_NUM ; i++) {if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT ) && i >0 ) - eth->irq[i] = eth->irq[0 ]; + eth->irq[i] = eth->irq[MTK_FE_IRQ_SHARED ];else eth->irq[i] =platform_get_irq (pdev, i);
@@ -3420,7 +3420,7 @@ static void mtk_poll_controller(struct net_device *dev)mtk_tx_irq_disable (eth,MTK_TX_DONE_INT );mtk_rx_irq_disable (eth, eth->soc->rx.irq_done_mask); -mtk_handle_irq_rx (eth->irq[2 ], dev); +mtk_handle_irq_rx (eth->irq[MTK_FE_IRQ_RX ], dev);mtk_tx_irq_enable (eth,MTK_TX_DONE_INT );mtk_rx_irq_enable (eth, eth->soc->rx.irq_done_mask); }
@@ -4906,7 +4906,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) eth->netdev[id]->features |= eth->soc->hw_features; eth->netdev[id]->ethtool_ops = &mtk_ethtool_ops; - eth->netdev[id]->irq = eth->irq[0 ]; + eth->netdev[id]->irq = eth->irq[MTK_FE_IRQ_SHARED ]; eth->netdev[id]->dev.of_node = np;if (MTK_HAS_CAPS (eth->soc->caps,MTK_SOC_MT7628 ))
@@ -5183,17 +5183,17 @@ static int mtk_probe(struct platform_device *pdev) }if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT )) { - err =devm_request_irq (eth->dev, eth->irq[0 ], + err =devm_request_irq (eth->dev, eth->irq[MTK_FE_IRQ_SHARED ], mtk_handle_irq,0 ,dev_name (eth->dev), eth); }else { - err =devm_request_irq (eth->dev, eth->irq[1 ], + err =devm_request_irq (eth->dev, eth->irq[MTK_FE_IRQ_TX ], mtk_handle_irq_tx,0 ,dev_name (eth->dev), eth);if (err) goto err_free_dev; - err =devm_request_irq (eth->dev, eth->irq[2 ], + err =devm_request_irq (eth->dev, eth->irq[MTK_FE_IRQ_RX ], mtk_handle_irq_rx,0 ,dev_name (eth->dev), eth); }
@@ -5239,7 +5239,7 @@ static int mtk_probe(struct platform_device *pdev) }else netif_info (eth, probe, eth->netdev[i],"mediatek frame engine at 0x%08lx, irq %d\n" , - eth->netdev[i]->base_addr, eth->irq[0 ]); + eth->netdev[i]->base_addr, eth->irq[MTK_FE_IRQ_SHARED ]); }/* we run 2 devices on the same DMA ring so we need a dummy device
drivers/net/ethernet/mediatek/mtk_eth_soc.h +6 -1
@@ -642,6 +642,11 @@#define MTK_MAC_FSM (x) (0x1010C + ((x) * 0x100)) +#define MTK_FE_IRQ_SHARED 0 +#define MTK_FE_IRQ_TX 1 +#define MTK_FE_IRQ_RX 2 +#define MTK_FE_IRQ_NUM (MTK_FE_IRQ_RX + 1) +struct mtk_rx_dma {unsigned int rxd1;unsigned int rxd2;
@@ -1292,7 +1297,7 @@ struct mtk_eth {struct net_device *dummy_dev;struct net_device *netdev[MTK_MAX_DEVS ];struct mtk_mac *mac[MTK_MAX_DEVS ]; -int irq[3 ]; +int irq[MTK_FE_IRQ_NUM ];u32 msg_enable;unsigned long sysclk;struct regmap *ethsys;
Signature · 1 line
2.43.0
PATCH v6 3/4 net: ethernet: mtk_eth_soc: skip first IRQ if not used
In reply to Frank WunderlichFrom: Frank Wunderlich <[email protected]>
On SoCs with dedicated RX and TX interrupts (all except MT7621 and MT7628) platform_get_irq() is called for the first IRQ (eth->irq[0]) but it is never used.
Skip the first IRQ and reduce the IRQ-count to 2.
---
v6:
- changed commit description a bit
- use MTK_FE_IRQ_SHARED instead of 0
v5:
- change commit title and description
v4:
- drop >2 condition as max is already 2 and drop the else continue
- update comment to explain which IRQs are taken in legacy way
--- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 ++++++++---- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 4 ++-- 2 files changed, 10 insertions(+), 6 deletions(-)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +8 -4
@@ -3353,10 +3353,14 @@ static int mtk_get_irqs(struct platform_device *pdev, struct mtk_eth *eth)* the second is for TX, and the third is for RX. */ for (i =0 ; i <MTK_FE_IRQ_NUM ; i++) { -if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT ) && i >0 ) - eth->irq[i] = eth->irq[MTK_FE_IRQ_SHARED ]; -else - eth->irq[i] =platform_get_irq (pdev, i); +if (MTK_HAS_CAPS (eth->soc->caps,MTK_SHARED_INT )) { +if (i ==MTK_FE_IRQ_SHARED ) + eth->irq[MTK_FE_IRQ_SHARED ] =platform_get_irq (pdev, i); +else + eth->irq[i] = eth->irq[MTK_FE_IRQ_SHARED ]; + }else { + eth->irq[i] =platform_get_irq (pdev, i +1 ); + }if (eth->irq[i] <0 ) {dev_err (&pdev->dev,"no IRQ%d resource found\n" , i);
drivers/net/ethernet/mediatek/mtk_eth_soc.h +2 -2
@@ -643,8 +643,8 @@#define MTK_MAC_FSM (x) (0x1010C + ((x) * 0x100))#define MTK_FE_IRQ_SHARED 0 -#define MTK_FE_IRQ_TX 1 -#define MTK_FE_IRQ_RX 2 +#define MTK_FE_IRQ_TX 0 +#define MTK_FE_IRQ_RX 1#define MTK_FE_IRQ_NUM (MTK_FE_IRQ_RX + 1)struct mtk_rx_dma {
Signature · 1 line
2.43.0
PATCH v6 4/4 net: ethernet: mtk_eth_soc: only use legacy mode on missing IRQ name
In reply to Frank WunderlichFrom: Frank Wunderlich <[email protected]>
If platform_get_irq_byname returns -ENXIO fall back to legacy (index based) mode, but on other errors function should return this error.
--- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/net/ethernet/mediatek/mtk_eth_soc.c +7 -0
@@ -3346,6 +3346,13 @@ static int mtk_get_irqs(struct platform_device *pdev, struct mtk_eth *eth)if (eth->irq[MTK_FE_IRQ_TX ] >=0 && eth->irq[MTK_FE_IRQ_RX ] >=0 )return 0 ; +/* only use legacy mode if platform_get_irq_byname returned -ENXIO */ +if (eth->irq[MTK_FE_IRQ_TX ] != -ENXIO ) +return eth->irq[MTK_FE_IRQ_TX ]; + +if (eth->irq[MTK_FE_IRQ_RX ] != -ENXIO ) +return eth->irq[MTK_FE_IRQ_RX ]; +/* legacy way: * On MTK_SHARED_INT SoCs (MT7621 + MT7628) the first IRQ is taken * from devicetree and used for both RX and TX - it is shared.
Signature · 1 line
2.43.0
Re: [net-next v6 4/4] net: ethernet: mtk_eth_soc: only use legacy mode on missing IRQ name
Quoted 7 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
If
platform_get_irq_bynamereturns-ENXIOfall back to legacy (index based) mode, but on other errors function should return this error.Suggested-by Daniel Golle <[email protected]>Signed-off-by Frank Wunderlich <[email protected]>
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 8 lines · On Thu, 19 Jun 2025 15:21:20 +0200 you wrote:
From: Frank Wunderlich <[email protected]>
This series introduces named IRQs while keeping the index based way for older dts.
Further it makes some cleanup like adding consts for index access and avoids loading first IRQ which was not used on nonSHARED_INTSoCs.[...]
Here is the summary with links:
- [net-next,v6,1/4] net: ethernet: mtk_eth_soc: support named IRQs
https://git.kernel.org/netdev/net-next/c/ee85b483fefb - [net-next,v6,2/4] net: ethernet: mtk_eth_soc: add consts for irq index https://git.kernel.org/netdev/net-next/c/498190100992 - [net-next,v6,3/4] net: ethernet: mtk_eth_soc: skip first IRQ if not used https://git.kernel.org/netdev/net-next/c/9c0feca0a68b - [net-next,v6,4/4] net: ethernet: mtk_eth_soc: only use legacy mode on missing IRQ name https://git.kernel.org/netdev/net-next/c/070e98dd4e26
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html