remoteproc: imx_rproc: allow attaching to running core kicked by the bootloader
Subsystems (4)
v6 cover remoteproc: imx_rproc: allow attaching to running core kicked by the bootloader
From: Hiago De Franco <[email protected]>
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function, dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domains IMX_SC_R_M4_0_PID0 and IMX_SC_R_M4_0_MU_1A in this case). If it is already powered on, the driver will attach to it.
Finally, the imx_rproc_clk_enable() function was also changed to make it return before dev_clk_get() is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent to imx_rproc [2] and from a reported regression [3].
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/
v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment inside imx_rproc.c file.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/
Hiago De Franco (3):
pmdomain: core: introduce dev_pm_genpd_is_on()
remoteproc: imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc: imx_rproc: detect and attach to pre-booted remote cores
drivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)
Signature · 1 line
2.39.5
PATCH v6 1/3 pmdomain: core: introduce dev_pm_genpd_is_on()
From: Hiago De Franco <[email protected]>
This helper function returns the current power status of a given generic power domain.
As example, remoteproc/imx_rproc.c can now use this function to check the power status of the remote core to properly set "attached" or "offline" modes.
---
v5 -> v6:
- Added Bjorn reviewed-by.
v4 -> v5:
- s/dev_pm_genpd_is_on/dev_pm_genpd_is_on()/ in function description.
- Updated function description to be explicit the function reflects the current power status and that this might change after the function returns, especially if the genpd is shared.
v3 -> v4:
- New patch.
--- drivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++++++++ include/linux/pm_domain.h | 6 ++++++ 2 files changed, 39 insertions(+)
drivers/pmdomain/core.c +33 -0
@@ -758,6 +758,39 @@ int dev_pm_genpd_rpm_always_on(struct device *dev, bool on) }EXPORT_SYMBOL_GPL (dev_pm_genpd_rpm_always_on); +/** +* dev_pm_genpd_is_on() - Get device's current power domain status +* +* @dev: Device to get the current power status +* +* This function checks whether the generic power domain associated with the +* given device is on or not by verifying if genpd_status_on equals +* GENPD_STATE_ON. +* +* Note: this function returns the power status of the genpd at the time of the +* call. The power status may change after due to activity from other devices +* sharing the same genpd. Therefore, this information should not be relied for +* long-term decisions about the device power state. +* +* Return: 'true' if the device's power domain is on, 'false' otherwise. +*/ +bool dev_pm_genpd_is_on (struct device *dev) +{ +struct generic_pm_domain *genpd; +bool is_on; + + genpd =dev_to_genpd_safe (dev); +if (!genpd) +return false; + +genpd_lock (genpd); + is_on =genpd_status_on (genpd); +genpd_unlock (genpd); + +return is_on; +} +EXPORT_SYMBOL_GPL (dev_pm_genpd_is_on); +/** * pm_genpd_inc_rejected() - Adjust the rejected/usage counts for an idle-state. *
include/linux/pm_domain.h +6 -0
@@ -301,6 +301,7 @@ void dev_pm_genpd_synced_poweroff(struct device *dev);int dev_pm_genpd_set_hwmode (struct device *dev,bool enable);bool dev_pm_genpd_get_hwmode (struct device *dev);int dev_pm_genpd_rpm_always_on (struct device *dev,bool on); +bool dev_pm_genpd_is_on (struct device *dev);extern struct dev_power_governor simple_qos_governor;extern struct dev_power_governor pm_domain_always_on_gov;
@@ -393,6 +394,11 @@ static inline int dev_pm_genpd_rpm_always_on(struct device *dev, bool on) return -EOPNOTSUPP; } +static inline bool dev_pm_genpd_is_on (struct device *dev) +{ +return false; +} +#define simple_qos_governor (*(struct dev_power_governor *)(NULL))#define pm_domain_always_on_gov (*(struct dev_power_governor *)(NULL))#endif
Signature · 1 line
2.39.5
PATCH v6 2/3 remoteproc: imx_rproc: skip clock enable when M-core is managed by the SCU
In reply to Hiago De FrancoFrom: Hiago De Franco <[email protected]>
For the i.MX8X and i.MX8 family SoCs, when the Cortex-M core is powered up and started by the Cortex-A core using the bootloader (e.g., via the U-Boot bootaux command), both M-core and Linux run within the same SCFW (System Controller Firmware) partition. With that, Linux has permission to control the M-core.
But once the M-core is started by the bootloader, the SCFW automatically enables its clock and sets the clock rate. If Linux later attempts to enable the same clock via clk_prepare_enable(), the SCFW returns a 'LOCKED' error, as the clock is already configured by the SCFW. This causes the probe function in imx_rproc.c to fail, leading to the M-core power domain being shut down while the core is still running. This results in a fault from the SCU (System Controller Unit) and triggers a system reset.
To address this issue, ignore handling the clk for i.MX8X and i.MX8 M-core, as SCFW already takes care of enabling and configuring the clock.
---
v5 -> v6:
- Commit description improved, as suggested.
v4 -> v5:
- Unchanged.
v3 -> v4:
- Unchanged.
v2 -> v3:
- Unchanged.
v1 -> v2:
- Commit description updated, as suggested. Fixed Peng Fan email.
--- drivers/remoteproc/imx_rproc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/remoteproc/imx_rproc.c +2 -2
@@ -1029,8 +1029,8 @@ static int imx_rproc_clk_enable(struct imx_rproc *priv)struct device *dev = priv->dev;int ret; -/* Remote core is not under control of Linux */ -if (dcfg->method ==IMX_RPROC_NONE ) +/* Remote core is not under control of Linux or it is managed by SCU API */ +if (dcfg->method ==IMX_RPROC_NONE || dcfg->method ==IMX_RPROC_SCU_API )return 0 ; priv->clk =devm_clk_get (dev,NULL );
Signature · 1 line
2.39.5
PATCH v6 3/3 remoteproc: imx_rproc: detect and attach to pre-booted remote cores
In reply to Hiago De FrancoFrom: Hiago De Franco <[email protected]>
When the Cortex-M remote core is started and already running before Linux boots (typically by the Cortex-A bootloader using a command like bootaux), the current driver is unable to attach to it. This is because the driver only checks for remote cores running in different SCFW partitions. However in this case, the M-core is in the same partition as Linux and is already powered up and running by the bootloader.
This patch adds a check using dev_pm_genpd_is_on() to verify whether the M-core's power domains are already on. If all power domain devices are on, the driver assumes the M-core is running and proceed to attach to it.
To accomplish this, we need to avoid passing any attach_data or flags to dev_pm_domain_attach_list(), allowing the platform device become a consumer of the power domain provider without changing its current state.
During probe, also enable and sync the device runtime PM to make sure the power domains are correctly managed when the core is controlled by the kernel.
---
v5 -> v6:
- Commit description improved, as suggested. Added Ulf Hansson reviewed by. Comment on imx-rproc.c improved.
v4 -> v5:
- pm_runtime_get_sync() removed in favor of pm_runtime_resume_and_get(). Now it also checks the return value of this function.
- Added pm_runtime_disable() and pm_runtime_put() to imx_rproc_remove() function.
v3 -> v4:
- Changed to use the new dev_pm_genpd_is_on() function instead, as suggested by Ulf. This will now get the power status of the two remote cores power domains to decided if imx_rpoc needs to attach or not. In order to do that, pm_runtime_enable() and pm_runtime_get_sync() were introduced and pd_data was removed.
v2 -> v3:
- Unchanged.
v1 -> v2:
- Dropped unecessary include. Removed the imx_rproc_is_on function, as suggested.
--- drivers/remoteproc/imx_rproc.c | 37 +++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-)
drivers/remoteproc/imx_rproc.c +32 -5
@@ -18,6 +18,7 @@#include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/pm_domain.h> +#include <linux/pm_runtime.h> #include <linux/reboot.h> #include <linux/regmap.h> #include <linux/remoteproc.h>
@@ -890,10 +891,8 @@ static int imx_rproc_partition_notify(struct notifier_block *nb,static int imx_rproc_attach_pd (struct imx_rproc *priv) {struct device *dev = priv->dev; -int ret; -struct dev_pm_domain_attach_data pd_data = { - .pd_flags =PD_FLAG_DEV_LINK_ON , - }; +int ret, i; +bool detached = true;/* * If there is only one power-domain entry, the platform driver framework
@@ -902,7 +901,22 @@ static int imx_rproc_attach_pd(struct imx_rproc *priv)if (dev->pm_domain)return 0 ; - ret =dev_pm_domain_attach_list (dev, &pd_data, &priv->pd_list); + ret =dev_pm_domain_attach_list (dev,NULL , &priv->pd_list); +/* +* If all the power domain devices are already turned on, the remote +* core is already powered up and running when the kernel booted (e.g., +* started by U-Boot's bootaux command). In this case attach to it. +*/ +for (i =0 ; i < ret; i++) { +if (!dev_pm_genpd_is_on (priv->pd_list->pd_devs[i])) { + detached = false; +break ; + } + } + +if (detached) + priv->rproc->state =RPROC_DETACHED ; +return ret <0 ? ret :0 ; }
@@ -1146,6 +1160,15 @@ static int imx_rproc_probe(struct platform_device *pdev) } } +if (dcfg->method ==IMX_RPROC_SCU_API ) { +pm_runtime_enable (dev); + ret =pm_runtime_resume_and_get (dev); +if (ret) { +dev_err (dev,"pm_runtime get failed: %d\n" , ret); + goto err_put_clk; + } + } + ret =rproc_add (rproc);if (ret) {dev_err (dev,"rproc_add failed\n" );
@@ -1171,6 +1194,10 @@ static void imx_rproc_remove(struct platform_device *pdev)struct rproc *rproc =platform_get_drvdata (pdev);struct imx_rproc *priv = rproc->priv; +if (priv->dcfg->method ==IMX_RPROC_SCU_API ) { +pm_runtime_disable (priv->dev); +pm_runtime_put (priv->dev); + }clk_disable_unprepare (priv->clk);rproc_del (rproc);imx_rproc_put_scu (rproc);
Signature · 1 line
2.39.5
Quoted 22 lines · Hiago De Franco
From: Hiago De Franco <[email protected]>
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function,
dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domainsIMX_SC_R_M4_0_PID0andIMX_SC_R_M4_0_MU_1Ain this case). If it is already powered on, the driver will attach to it.Finally, the
imx_rproc_clk_enable()function was also changed to make it return beforedev_clk_get()is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent toimx_rproc[2] and from a reported regression [3].
Quoted 3 lines
[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/
Sorry I missed the reviewed by from Peng, I will be fixing this in the next revision today.
Best regards,
Hiago.
Quoted 30 lines
v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment insideimx_rproc.cfile.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/Hiago De Franco (3):
pmdomain: core: introducedev_pm_genpd_is_on()
remoteproc:imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc:imx_rproc: detect and attach to pre-booted remote coresdrivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)Signature · 1 line
2.39.5
Mathieu Poirier
maintainerQuoted 7 lines · Hiago De Franco
From: Hiago De Franco <[email protected]>
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
I thought we agreed to repost when the feature referred to above and the work in drivers/pmdomain/core.c will be merge. I'm not sure what to do with this patchset.
Quoted 49 lines
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function,
dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domainsIMX_SC_R_M4_0_PID0andIMX_SC_R_M4_0_MU_1Ain this case). If it is already powered on, the driver will attach to it.Finally, the
imx_rproc_clk_enable()function was also changed to make it return beforedev_clk_get()is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent toimx_rproc[2] and from a reported regression [3].[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment insideimx_rproc.cfile.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/Hiago De Franco (3):
pmdomain: core: introducedev_pm_genpd_is_on()
remoteproc:imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc:imx_rproc: detect and attach to pre-booted remote coresdrivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)--
2.39.5
Quoted 4 lines · Mathieu Poirier
Quoted 3 lines · Hiago De Franco
From: Hiago De Franco <[email protected]>
Quoted 8 lines
Quoted 4 lines
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
I thought we agreed to repost when the feature referred to above and the work in
drivers/pmdomain/core.cwill be merge. I'm not sure what to do with this patchset.
Sorry Mathieu, my goal was to update the whole patch series with your reviews from v5 so you could take a look and then I would resend everything again once the others have been merged.
If you prefer I can wait for the other patches to be merged and then send the next v7 corrected.
Best regards,
Hiago.
Quoted 50 lines
Quoted 50 lines
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function,
dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domainsIMX_SC_R_M4_0_PID0andIMX_SC_R_M4_0_MU_1Ain this case). If it is already powered on, the driver will attach to it.Finally, the
imx_rproc_clk_enable()function was also changed to make it return beforedev_clk_get()is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent toimx_rproc[2] and from a reported regression [3].[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment insideimx_rproc.cfile.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/Hiago De Franco (3):
pmdomain: core: introducedev_pm_genpd_is_on()
remoteproc:imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc:imx_rproc: detect and attach to pre-booted remote coresdrivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)--
2.39.5
Mathieu Poirier
maintainerQuoted 11 lines · Hiago De Franco
Quoted 9 lines · Mathieu Poirier
Quoted 7 lines · Hiago De Franco
From: Hiago De Franco <[email protected]>
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
Quoted 8 lines
Quoted 3 lines
I thought we agreed to repost when the feature referred to above and the work in
drivers/pmdomain/core.cwill be merge. I'm not sure what to do with this patchset.Sorry Mathieu, my goal was to update the whole patch series with your reviews from v5 so you could take a look and then I would resend everything again once the others have been merged.
Ok, I'll take a look next week.
Quoted 56 lines
If you prefer I can wait for the other patches to be merged and then send the next v7 corrected.
Best regards,
Hiago.Quoted 50 lines
Quoted 50 lines
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function,
dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domainsIMX_SC_R_M4_0_PID0andIMX_SC_R_M4_0_MU_1Ain this case). If it is already powered on, the driver will attach to it.Finally, the
imx_rproc_clk_enable()function was also changed to make it return beforedev_clk_get()is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent toimx_rproc[2] and from a reported regression [3].[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment insideimx_rproc.cfile.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/Hiago De Franco (3):
pmdomain: core: introducedev_pm_genpd_is_on()
remoteproc:imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc:imx_rproc: detect and attach to pre-booted remote coresdrivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)--
2.39.5
Quoted 16 lines · Mathieu Poirier
Quoted 15 lines · Hiago De Franco
Quoted 12 lines · Mathieu Poirier
Quoted 7 lines · Hiago De Franco
From: Hiago De Franco <[email protected]>
This patch series depends on Ulf's patches that are currently under review, "pmdomain: Add generic ->sync_state() support to genpd" [1]. Without them, this series is not going to work.
I thought we agreed to repost when the feature referred to above and the work in
drivers/pmdomain/core.cwill be merge. I'm not sure what to do with this patchset.
Quoted 6 lines
Quoted 4 lines
Sorry Mathieu, my goal was to update the whole patch series with your reviews from v5 so you could take a look and then I would resend everything again once the others have been merged.
Ok, I'll take a look next week.
Thanks, I will be sending v7 with the missing reviewed-by then.
Best regards,
Hiago.
Quoted 57 lines
Quoted 57 lines
If you prefer I can wait for the other patches to be merged and then send the next v7 corrected.
Best regards,
Hiago.Quoted 50 lines
Quoted 50 lines
For the i.MX8X and i.MX8 family SoCs, currently when the remotecore is started by the bootloader and the M core and A core are in the same partition, the driver is not capable to detect the remote core and report the correct state of it.
This patch series implement a new function,
dev_pm_genpd_is_on(), which returns the power status of a given power domain (M core power domainsIMX_SC_R_M4_0_PID0andIMX_SC_R_M4_0_MU_1Ain this case). If it is already powered on, the driver will attach to it.Finally, the
imx_rproc_clk_enable()function was also changed to make it return beforedev_clk_get()is called, as it currently generates an SCU fault reset if the remote core is already running and the kernel tries to enable the clock again. These changes are a follow up from a v1 sent toimx_rproc[2] and from a reported regression [3].[1] https://lore.kernel.org/all/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/20250404141713.ac2ntcsjsf7epdfa@hiago-nb/v6:
- Added "reviewed by" from Ulf and Bjorn.
- Fixed and improved commit descriptions of patches 2 and 3.
- Improved the comment insideimx_rproc.cfile.
v5:
- https://lore.kernel.org/all/[email protected]/
v4:
- https://lore.kernel.org/lkml/[email protected]/
v3:
- https://lore.kernel.org/all/[email protected]/
v2:
- https://lore.kernel.org/lkml/[email protected]/
v1:
- https://lore.kernel.org/lkml/[email protected]/Hiago De Franco (3):
pmdomain: core: introducedev_pm_genpd_is_on()
remoteproc:imx_rproc: skip clock enable when M-core is managed by the
SCU
remoteproc:imx_rproc: detect and attach to pre-booted remote coresdrivers/pmdomain/core.c | 33 +++++++++++++++++++++++++++ drivers/remoteproc/imx_rproc.c | 41 ++++++++++++++++++++++++++++------ include/linux/pm_domain.h | 6 +++++ 3 files changed, 73 insertions(+), 7 deletions(-)--
2.39.5