Skip to contentSkip to conversation

ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface

PATCH Applied Frieder Schrempf 2 participants 2 messages Jul 8, 2025 – Jul 11, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface

From: Annette Kobou <[email protected]>

The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work.

Fixes 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
---
 arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +0 -1
index 29d2f86d5e34a..f4c45e964daf8 100644
@@ -168,7 +168,6 @@ &uart2 {
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rx-during-tx;
-	rs485-rts-active-low;
 	uart-has-rtscts;
 	status = "okay";
 };
Signature · 1 line
2.50.0
Applied
#1 lore raw
Quoted 9 lines · Frieder Schrempf

From: Annette Kobou <[email protected]>

The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work.

Fixes 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")

Applied, thanks!