ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface
Subsystems (2)
PATCH 1/1 ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface
From: Annette Kobou <[email protected]>
The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work.
Signed-off-by Annette Kobou <[email protected]>
Signed-off-by Frieder Schrempf <[email protected]>
Fixes 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
--- arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/nxp/imx/imx6ul-kontron-bl-common.dtsi +0 -1
@@ -168,7 +168,6 @@ &uart2 { pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; rs485-rx-during-tx; - rs485-rts-active-low; uart-has-rtscts; status = "okay"; };
Signature · 1 line
2.50.0
Shawn Guo
AppliedQuoted 9 lines · Frieder Schrempf
From: Annette Kobou <[email protected]>
The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work.
Signed-off-by Annette Kobou <[email protected]>Signed-off-by Frieder Schrempf <[email protected]>Fixes 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Applied, thanks!