Skip to contentSkip to conversation

package/linux-firmware: add option for Chips&Media Wave 521C

PATCH In review Heiko Thiery 2 participants 8 messages Jul 15, 2025 – Jul 21, 2025

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 package/linux-firmware: add option for Chips&Media Wave 521C

Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.

This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.

---
v2:
- fixed value for LINUX_FIRMWARE_ALL_LICENSE_FILES, use LICENCE.cnm instead of LICENSE.cnm (Julien)
- add entry to the hash file for LICENCE.cnm (Julien)

 package/linux-firmware/Config.in           | 6 ++++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 12 insertions(+)
package/linux-firmware/Config.in +6 -0
index 54910df6fd..778dfef8a0 100644
@@ -33,6 +33,12 @@ config BR2_PACKAGE_LINUX_FIRMWARE_AMDGPU
 	help
 	  Firmware files for AMD GPU video cards.
 
+config BR2_PACKAGE_LINUX_FIRMWARE_CNM_WAVE521C_K3_CODEC
+	bool "Chips&Media Wave 521C codec IP for K3"
+	help
+	  Firmware files for the Chips&Media Wave521C decoder
+	  needed by the Linux TI j721s2-wave521c driver.
+
 config BR2_PACKAGE_LINUX_FIRMWARE_I915
 	bool "Intel i915 video card firmware"
 	help
package/linux-firmware/linux-firmware.hash +1 -0
index 36cb97c9fe..e980010cd8 100644
@@ -14,6 +14,7 @@ sha256  bf1cb89140fe7e138fec229b26fa45d2fb46f416ab559916c6e56c0224df2e8e  LICENC
 sha256  691f2b5e3e94e06aa89450c99ff08c83336c77fe4ad64a609b1cddea4bf98727  LICENCE.bnx2x
 sha256  b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d  LICENCE.broadcom_bcm43xx
 sha256  a5777f9e80aca0603b0648454de996168b1c530322550ccda94d6d78bcf6c061  LICENCE.chelsio_firmware
+sha256  88236d5ae45b7abc96c2ab4c6952af88758e24b17412dd173746ee1c559b3c6f  LICENCE.cnm
 sha256  ae0db6cc4db33941148df0f67de53e76a77b1b5a46b3165edb7040aa2750015f  LICENCE.cypress
 sha256  60fbc9cccb455e1a3306c97db942d6f24fa93664be61d54c497637e6d0e2ae83  LICENCE.fw_sst_0f28
 sha256  5181b0b51efc79d5acb2c9bb92042878fdbad97a92114d4ab5e32e2b5b52fce4  LICENCE.ibt_firmware
package/linux-firmware/linux-firmware.mk +5 -0
index b9fd471e85..40758054e5 100644
@@ -25,6 +25,11 @@ LINUX_FIRMWARE_DIRS += amdgpu
 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.amdgpu
 endif
 
+ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_CNM_WAVE521C_K3_CODEC),y)
+LINUX_FIRMWARE_FILES += cnm/wave521c_k3_codec_fw.bin
+LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.cnm
+endif
+
 ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_I915),y)
 LINUX_FIRMWARE_DIRS += i915
 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.i915
Signature · 6 lines
2.39.5

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#1 lore raw

PATCH v2 1/1 package/linux-firmware: add support for PowerVR rogue

This "powervr" directory has been present in linux-firmware since version 20231211.

---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)

 package/linux-firmware/Config.in           | 5 +++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 11 insertions(+)
package/linux-firmware/Config.in +5 -0
index 34f3fb7691..54910df6fd 100644
@@ -729,6 +729,11 @@ config BR2_PACKAGE_LINUX_FIRMWARE_ARM_MALI_CSF
 	  Firmware files for Arm Mali 10th generation GPU
 	  needed by the linux panthor kernel driver.
 
+config BR2_PACKAGE_LINUX_FIRMWARE_POWERVR_ROGUE
+	bool "PowerVR Technologies Rogue GPU firmware"
+	help
+	  Firmware files for PowerVR Technologies Rogue video cards.
+
 endmenu
 
 menu "Serial adapters firmware"
package/linux-firmware/linux-firmware.hash +1 -0
index c9c673f7e2..36cb97c9fe 100644
@@ -26,6 +26,7 @@ sha256  2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4  LICENC
 sha256  a90d3f66704d85889945fec5525ea77622549da83aced1aac99828383f8f1805  LICENCE.mediatek
 sha256  0fc67bd715b3395f3f2af464781910e9e69c4ba23da304352229b42dc9e986c3  LICENCE.microchip
 sha256  59ae206c89108905ebdc9ad4c9336526bd2c0d50fbf988c21e8c2a82719d42a4  LICENCE.moxa
+sha256  1c9aa6bd6703a7ce1cdb879542fa1d8aca115a327bd819b193c971de9c53f402  LICENSE.powervr
 sha256  0bd9f7cae3cf72b12a63359a725ccbb76ddbd6831372695a9162144329800dd0  LICENCE.qat_firmware
 sha256  4071a11d878dbc0ac6d9e71203d03b151638f9d7a8bc47a54c3cb964100d5822  LICENCE.qla2xxx
 sha256  d7bec70668ddd4aae8fb4aa32870e54b49fcdb0b9b007aa9f54b53a1ac7461bd  LICENCE.ralink-firmware.txt
package/linux-firmware/linux-firmware.mk +5 -0
index 38212e12ac..b9fd471e85 100644
@@ -931,6 +931,11 @@ LINUX_FIRMWARE_FILES += arm/mali/arch*/mali_csffw.bin
 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.mali_csffw
 endif
 
+ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_POWERVR_ROGUE),y)
+LINUX_FIRMWARE_DIRS += powervr
+LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.powervr
+endif
+
 ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RP2),y)
 LINUX_FIRMWARE_FILES += rp2.fw
 endif
Signature · 6 lines
2.39.5

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Reviewed-by Bryan Brattlof on v2 1/1
#2 lore raw

Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue

On July 15, 2025 thus sayeth Heiko Thiery:

Quoted 4 lines

This "powervr" directory has been present in linux-firmware since version 20231211.

Quoted 9 lines

---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)

 package/linux-firmware/Config.in           | 5 +++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 11 insertions(+)

I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)

~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#3 lore raw

Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue

Hi,

Am Di., 15. Juli 2025 um 16:02 Uhr schrieb Bryan Brattlof <[email protected]>:

Quoted 16 lines

On July 15, 2025 thus sayeth Heiko Thiery:

Quoted 4 lines

This "powervr" directory has been present in linux-firmware since version 20231211.

Quoted 9 lines

---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)

 package/linux-firmware/Config.in           | 5 +++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 11 insertions(+)
Quoted 4 lines

I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)

I know that the mainline support is not yet in a good shape. But there is progress. So it is good to have the FW already available.

Quoted 4 lines

~Bryan

BR
Heiko
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#4 lore raw

Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue

On July 21, 2025 thus sayeth Heiko Thiery:

Quoted 19 lines

Hi,

Am Di., 15. Juli 2025 um 16:02 Uhr schrieb Bryan Brattlof <[email protected]>:

Quoted 16 lines

On July 15, 2025 thus sayeth Heiko Thiery:

Quoted 13 lines

This "powervr" directory has been present in linux-firmware since version 20231211.

---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)

 package/linux-firmware/Config.in           | 5 +++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 11 insertions(+)
Quoted 7 lines
Quoted 4 lines

I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)

I know that the mainline support is not yet in a good shape. But there is progress. So it is good to have the FW already available.

Oh I completely agree. I'm totally excited about the continued progress. I just wanted to warn anyone if they assumed the progress was finished.

Thanks for sending this
~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Reviewed-by Bryan Brattlof on v2 1/1
#6 lore raw
In reply to Heiko Thiery

On July 15, 2025 thus sayeth Heiko Thiery:

Quoted 13 lines

Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.

This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.

---
v2:
- fixed value for LINUX_FIRMWARE_ALL_LICENSE_FILES, use LICENCE.cnm instead of LICENSE.cnm (Julien)
- add entry to the hash file for LICENCE.cnm (Julien)

Quoted 5 lines
 package/linux-firmware/Config.in           | 6 ++++++
 package/linux-firmware/linux-firmware.hash | 1 +
 package/linux-firmware/linux-firmware.mk   | 5 +++++
 3 files changed, 12 insertions(+)

Nice!

~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

#7 lore raw
In reply to Heiko Thiery
Quoted 7 lines · Heiko Thiery

Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.

This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.

Applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot