package/linux-firmware: add option for Chips&Media Wave 521C
PATCH v2 1/1 package/linux-firmware: add option for Chips&Media Wave 521C
Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.
This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.
---
v2:
- fixed value for LINUX_FIRMWARE_ALL_LICENSE_FILES, use LICENCE.cnm instead of LICENSE.cnm (Julien)
- add entry to the hash file for LICENCE.cnm (Julien)
package/linux-firmware/Config.in | 6 ++++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 12 insertions(+)
package/linux-firmware/Config.in +6 -0
@@ -33,6 +33,12 @@ config BR2_PACKAGE_LINUX_FIRMWARE_AMDGPU help Firmware files for AMD GPU video cards. +config BR2_PACKAGE_LINUX_FIRMWARE_CNM_WAVE521C_K3_CODEC + bool "Chips&Media Wave 521C codec IP for K3" + help + Firmware files for the Chips&Media Wave521C decoder + needed by the Linux TI j721s2-wave521c driver. + config BR2_PACKAGE_LINUX_FIRMWARE_I915 bool "Intel i915 video card firmware" help
package/linux-firmware/linux-firmware.hash +1 -0
@@ -14,6 +14,7 @@ sha256 bf1cb89140fe7e138fec229b26fa45d2fb46f416ab559916c6e56c0224df2e8e LICENC sha256 691f2b5e3e94e06aa89450c99ff08c83336c77fe4ad64a609b1cddea4bf98727 LICENCE.bnx2x sha256 b16056fc91b82a0e3e8de8f86c2dac98201aa9dc3cbd33e8d38f1b087fcec30d LICENCE.broadcom_bcm43xx sha256 a5777f9e80aca0603b0648454de996168b1c530322550ccda94d6d78bcf6c061 LICENCE.chelsio_firmware +sha256 88236d5ae45b7abc96c2ab4c6952af88758e24b17412dd173746ee1c559b3c6f LICENCE.cnm sha256 ae0db6cc4db33941148df0f67de53e76a77b1b5a46b3165edb7040aa2750015f LICENCE.cypress sha256 60fbc9cccb455e1a3306c97db942d6f24fa93664be61d54c497637e6d0e2ae83 LICENCE.fw_sst_0f28 sha256 5181b0b51efc79d5acb2c9bb92042878fdbad97a92114d4ab5e32e2b5b52fce4 LICENCE.ibt_firmware
package/linux-firmware/linux-firmware.mk +5 -0
@@ -25,6 +25,11 @@ LINUX_FIRMWARE_DIRS += amdgpu LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.amdgpu endif +ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_CNM_WAVE521C_K3_CODEC),y) +LINUX_FIRMWARE_FILES += cnm/wave521c_k3_codec_fw.bin +LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.cnm +endif + ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_I915),y) LINUX_FIRMWARE_DIRS += i915 LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.i915
Signature · 6 lines
2.39.5 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v2 1/1 package/linux-firmware: add support for PowerVR rogue
This "powervr" directory has been present in linux-firmware since version 20231211.
---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)
package/linux-firmware/Config.in | 5 +++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 11 insertions(+)
package/linux-firmware/Config.in +5 -0
@@ -729,6 +729,11 @@ config BR2_PACKAGE_LINUX_FIRMWARE_ARM_MALI_CSF Firmware files for Arm Mali 10th generation GPU needed by the linux panthor kernel driver. +config BR2_PACKAGE_LINUX_FIRMWARE_POWERVR_ROGUE + bool "PowerVR Technologies Rogue GPU firmware" + help + Firmware files for PowerVR Technologies Rogue video cards. + endmenu menu "Serial adapters firmware"
package/linux-firmware/linux-firmware.hash +1 -0
@@ -26,6 +26,7 @@ sha256 2d6062d63b91eb750bf741498691604f75184b9fee97608ec537cd09bd6a42b4 LICENC sha256 a90d3f66704d85889945fec5525ea77622549da83aced1aac99828383f8f1805 LICENCE.mediatek sha256 0fc67bd715b3395f3f2af464781910e9e69c4ba23da304352229b42dc9e986c3 LICENCE.microchip sha256 59ae206c89108905ebdc9ad4c9336526bd2c0d50fbf988c21e8c2a82719d42a4 LICENCE.moxa +sha256 1c9aa6bd6703a7ce1cdb879542fa1d8aca115a327bd819b193c971de9c53f402 LICENSE.powervr sha256 0bd9f7cae3cf72b12a63359a725ccbb76ddbd6831372695a9162144329800dd0 LICENCE.qat_firmware sha256 4071a11d878dbc0ac6d9e71203d03b151638f9d7a8bc47a54c3cb964100d5822 LICENCE.qla2xxx sha256 d7bec70668ddd4aae8fb4aa32870e54b49fcdb0b9b007aa9f54b53a1ac7461bd LICENCE.ralink-firmware.txt
package/linux-firmware/linux-firmware.mk +5 -0
@@ -931,6 +931,11 @@ LINUX_FIRMWARE_FILES += arm/mali/arch*/mali_csffw.bin LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENCE.mali_csffw endif +ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_POWERVR_ROGUE),y) +LINUX_FIRMWARE_DIRS += powervr +LINUX_FIRMWARE_ALL_LICENSE_FILES += LICENSE.powervr +endif + ifeq ($(BR2_PACKAGE_LINUX_FIRMWARE_RP2),y) LINUX_FIRMWARE_FILES += rp2.fw endif
Signature · 6 lines
2.39.5 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue
On July 15, 2025 thus sayeth Heiko Thiery:
Quoted 4 lines
This "powervr" directory has been present in linux-firmware since version 20231211.
Signed-off-by Heiko Thiery <[email protected]>
Quoted 9 lines
---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)package/linux-firmware/Config.in | 5 +++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 11 insertions(+)
I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)
~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue
Hi,
Am Di., 15. Juli 2025 um 16:02 Uhr schrieb Bryan Brattlof <[email protected]>:
Quoted 16 lines
On July 15, 2025 thus sayeth Heiko Thiery:
Quoted 4 lines
This "powervr" directory has been present in linux-firmware since version 20231211.
Signed-off-by Heiko Thiery <[email protected]>Quoted 9 lines
---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)package/linux-firmware/Config.in | 5 +++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 11 insertions(+)
Quoted 4 lines
I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)
I know that the mainline support is not yet in a good shape. But there is progress. So it is good to have the FW already available.
Quoted 4 lines
Reviewed-by Bryan Brattlof <[email protected]>~Bryan
BR
Heiko
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue
On July 21, 2025 thus sayeth Heiko Thiery:
Quoted 19 lines
Hi,
Am Di., 15. Juli 2025 um 16:02 Uhr schrieb Bryan Brattlof <[email protected]>:
Quoted 16 lines
On July 15, 2025 thus sayeth Heiko Thiery:
Quoted 13 lines
This "powervr" directory has been present in linux-firmware since version 20231211.
Signed-off-by Heiko Thiery <[email protected]>---
v2:
- add entry to the hash file for LICENSE.powervr (Julien)package/linux-firmware/Config.in | 5 +++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 11 insertions(+)
Quoted 7 lines
Quoted 4 lines
I don't do a lot with GPUs or VPUs but I seem to remember the GPU driver was kinda borked right now. It's no reason not to let the firmware in but I just wanted temper expectations before we start rendering some triangles :)
I know that the mainline support is not yet in a good shape. But there is progress. So it is good to have the FW already available.
Oh I completely agree. I'm totally excited about the continued progress. I just wanted to warn anyone if they assumed the progress was finished.
Thanks for sending this
~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v2] package/linux-firmware: add support for PowerVR rogue
In reply to Heiko ThieryQuoted 4 lines · Heiko Thiery
This "powervr" directory has been present in linux-firmware since version 20231211.
Signed-off-by Heiko Thiery <[email protected]>
Applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
On July 15, 2025 thus sayeth Heiko Thiery:
Quoted 13 lines
Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.
This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.
Signed-off-by Heiko Thiery <[email protected]>---
v2:
- fixed value forLINUX_FIRMWARE_ALL_LICENSE_FILES, use LICENCE.cnm instead of LICENSE.cnm (Julien)
- add entry to the hash file for LICENCE.cnm (Julien)
Quoted 5 lines
package/linux-firmware/Config.in | 6 ++++++ package/linux-firmware/linux-firmware.hash | 1 + package/linux-firmware/linux-firmware.mk | 5 +++++ 3 files changed, 12 insertions(+)
Nice!
~Bryan
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 7 lines · Heiko Thiery
Add an option to install the firmware files for Chips&Media Wave 521C video processor used in the TI K3 architecture.
This "cnm/wave521c_k3_codec_fw.bin" file has been present in linux-firmware since version 20221109.
Signed-off-by Heiko Thiery <[email protected]>
Applied to master, thanks.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot