Skip to contentSkip to conversation

perf/s390: Regression: Move uid filtering to BPF filters

PATCH Superseded Ilya Leoshkevich 4 participants 7 messages Aug 6, 2025 – Aug 7, 2025

Subsystems (4)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover perf/s390: Regression: Move uid filtering to BPF filters

v3: https://lore.kernel.org/bpf/[email protected]/
v3 -> v4: Rename the new field to dont_enable (Alexei, Eduard).
Switch the Fixes: tag in patch 2 (Alexander, Thomas). Fix typos in the cover letter (Thomas).

v2: https://lore.kernel.org/bpf/[email protected]/
v2 -> v3: Use no_ioctl_enable in perf.

v1: https://lore.kernel.org/bpf/[email protected]/
v1 -> v2: Introduce no_ioctl_enable (Jiri).

Hi,

This series fixes a regression caused by moving UID filtering to BPF. The regression affects all events that support auxiliary data, most notably, "cycles" events on s390, but also PT events on Intel. The symptom is missing events when UID filtering is enabled.

Patch 1 introduces a new option for the bpf_program__attach_perf_event_opts() function.
Patch 2 makes use of it in perf, and also contains a lot of technical details of why exactly the problem is occurring.

Thanks to Thomas Richter for the investigation and the initial version of this fix, and to Jiri Olsa for suggestions.

Best regards,
Ilya

Ilya Leoshkevich (2):
libbpf: Add the ability to suppress perf event enablement perf bpf-filter: Enable events manually

 tools/lib/bpf/libbpf.c       | 13 ++++++++-----
 tools/lib/bpf/libbpf.h       |  4 +++-
 tools/perf/util/bpf-filter.c |  5 ++++-
 3 files changed, 15 insertions(+), 7 deletions(-)
Signature · 1 line
2.50.1
#1 lore raw

PATCH v4 1/2 libbpf: Add the ability to suppress perf event enablement

Automatically enabling a perf event after attaching a BPF prog to it is not always desirable.

Add a new no_ioctl_enable field to struct bpf_perf_event_opts. While introducing ioctl_enable instead would be nicer in that it would avoid a double negation in the implementation, it would make DECLARE_LIBBPF_OPTS() less efficient.

---
 tools/lib/bpf/libbpf.c | 13 ++++++++-----
 tools/lib/bpf/libbpf.h |  4 +++-
 2 files changed, 11 insertions(+), 6 deletions(-)
tools/lib/bpf/libbpf.c +8 -5
index fb4d92c5c339..8f5a81b672e1 100644
@@ -10965,11 +10965,14 @@ struct bpf_link *bpf_program__attach_perf_event_opts(const struct bpf_program *p
 		}
 		link->link.fd = pfd;
 	}
-	if (ioctl(pfd, PERF_EVENT_IOC_ENABLE, 0) < 0) {
-		err = -errno;
-		pr_warn("prog '%s': failed to enable perf_event FD %d: %s\n",
-			prog->name, pfd, errstr(err));
-		goto err_out;
+
+	if (!OPTS_GET(opts, dont_enable, false)) {
+		if (ioctl(pfd, PERF_EVENT_IOC_ENABLE, 0) < 0) {
+			err = -errno;
+			pr_warn("prog '%s': failed to enable perf_event FD %d: %s\n",
+				prog->name, pfd, errstr(err));
+			goto err_out;
+		}
 	}
 
 	return &link->link;
tools/lib/bpf/libbpf.h +3 -1
index d1cf813a057b..455a957cb702 100644
@@ -499,9 +499,11 @@ struct bpf_perf_event_opts {
 	__u64 bpf_cookie;
 	/* don't use BPF link when attach BPF program */
 	bool force_ioctl_attach;
+	/* don't automatically enable the event */
+	bool dont_enable;
 	size_t :0;
 };
-#define bpf_perf_event_opts__last_field force_ioctl_attach
+#define bpf_perf_event_opts__last_field dont_enable
 
 LIBBPF_API struct bpf_link *
 bpf_program__attach_perf_event(const struct bpf_program *prog, int pfd);
Signature · 1 line
2.50.1
reviewer
#2 lore raw

Re: [PATCH v4 1/2] libbpf: Add the ability to suppress perf event enablement

Quoted 4 lines · Ilya Leoshkevich

Automatically enabling a perf event after attaching a BPF prog to it is not always desirable.

Add a new no_ioctl_enable field to struct bpf_perf_event_opts. While

no_ioctl_enable => dont_enable

Quoted 56 lines

introducing ioctl_enable instead would be nicer in that it would avoid a double negation in the implementation, it would make DECLARE_LIBBPF_OPTS() less efficient.

---
  tools/lib/bpf/libbpf.c | 13 ++++++++-----
  tools/lib/bpf/libbpf.h |  4 +++-
  2 files changed, 11 insertions(+), 6 deletions(-)
tools/lib/bpf/libbpf.c +8 -5
index fb4d92c5c339..8f5a81b672e1 100644
@@ -10965,11 +10965,14 @@ struct bpf_link *bpf_program__attach_perf_event_opts(const struct bpf_program *p
  		}
  		link->link.fd = pfd;
  	}
-	if (ioctl(pfd, PERF_EVENT_IOC_ENABLE, 0) < 0) {
-		err = -errno;
-		pr_warn("prog '%s': failed to enable perf_event FD %d: %s\n",
-			prog->name, pfd, errstr(err));
-		goto err_out;
+
+	if (!OPTS_GET(opts, dont_enable, false)) {
+		if (ioctl(pfd, PERF_EVENT_IOC_ENABLE, 0) < 0) {
+			err = -errno;
+			pr_warn("prog '%s': failed to enable perf_event FD %d: %s\n",
+				prog->name, pfd, errstr(err));
+			goto err_out;
+		}
  	}
 
  	return &link->link;
tools/lib/bpf/libbpf.h +3 -1
index d1cf813a057b..455a957cb702 100644
@@ -499,9 +499,11 @@ struct bpf_perf_event_opts {
  	__u64 bpf_cookie;
  	/* don't use BPF link when attach BPF program */
  	bool force_ioctl_attach;
+	/* don't automatically enable the event */
+	bool dont_enable;
  	size_t :0;
  };
-#define bpf_perf_event_opts__last_field force_ioctl_attach
+#define bpf_perf_event_opts__last_field dont_enable
 
  LIBBPF_API struct bpf_link *
  bpf_program__attach_perf_event(const struct bpf_program *prog, int pfd);
#3 lore raw

PATCH v4 2/2 perf bpf-filter: Enable events manually

In reply to Ilya Leoshkevich

On s390, and, in general, on all platforms where the respective event supports auxiliary data gathering, the command:

   # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.011 MB perf.data ]
   # ./perf report --stats | grep SAMPLE
   #

does not generate samples in the perf.data file. On x86 the command:

  # sudo perf record -e intel_pt// -u 0 ls

is broken too.

Looking at the sequence of calls in 'perf record' reveals this behavior:

1. The event 'cycles' is created and enabled:

record__open()

   +-> evlist__apply_filters()
       +-> perf_bpf_filter__prepare()
	   +-> bpf_program.attach_perf_event()
	       +-> bpf_program.attach_perf_event_opts()
	           +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)

The event 'cycles' is enabled and active now. However the event's ring-buffer to store the samples generated by hardware is not allocated yet.

2. The event's fd is mmap()ed to create the ring buffer:

record__open()

   +-> record__mmap()
       +-> record__mmap_evlist()
	   +-> evlist__mmap_ex()
	       +-> perf_evlist__mmap_ops()
	           +-> mmap_per_cpu()
	               +-> mmap_per_evsel()
	                   +-> mmap__mmap()
	                       +-> perf_mmap__mmap()
	                           +-> mmap()

This allocates the ring buffer for the event 'cycles'. With mmap() the kernel creates the ring buffer:

perf_mmap(): kernel function to create the event's ring
| buffer to save the sampled data.
|

   +-> ring_buffer_attach(): Allocates memory for ring buffer.
       |        The PMU has auxiliary data setup function. The
       |        has_aux(event) condition is true and the PMU's
       |        stop() is called to stop sampling. It is not
       |        restarted:
       |
       |        if (has_aux(event))
       |                perf_event_stop(event, 0);
       |
       +-> cpumsf_pmu_stop():

Hardware sampling is stopped. No samples are generated and saved anymore.

3. After the event 'cycles' has been mapped, the event is enabled a second time in:

__cmd_record()

   +-> evlist__enable()
       +-> __evlist__enable()
	   +-> evsel__enable_cpu()
	       +-> perf_evsel__enable_cpu()
	           +-> perf_evsel__run_ioctl()
	               +-> perf_evsel__ioctl()
	                   +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)

The second

      ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);

is just a NOP in this case. The first invocation in (1.) sets the event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions

perf_ioctl()

   +-> _perf_ioctl()
       +-> _perf_event_enable()
           +-> __perf_event_enable()

return immediately because event::state is already set to PERF_EVENT_STATE_ACTIVE.

This happens on s390, because the event 'cycles' offers the possibility to save auxilary data. The PMU callbacks setup_aux() and free_aux() are defined. Without both callback functions, cpumsf_pmu_stop() is not invoked and sampling continues.

To remedy this, remove the first invocation of

ioctl(..., PERF_EVENT_IOC_ENABLE, ...).

in step (1.) Create the event in step (1.) and enable it in step (3.) after the ring buffer has been mapped.

Output after:

 # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
 [ perf record: Woken up 3 times to write data ]
 [ perf record: Captured and wrote 0.876 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      16200  (99.5%)
              SAMPLE events:      16200
 #

The software event succeeded both before and after the patch:

 # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
					  ./perf test -w thloop 2
 [ perf record: Woken up 7 times to write data ]
 [ perf record: Captured and wrote 2.870 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      53506  (99.8%)
              SAMPLE events:      53506
 #
Fixes b4c658d4d63d61 ("perf target: Remove uid from target")
---
 tools/perf/util/bpf-filter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/perf/util/bpf-filter.c +4 -1
index d0e013eeb0f7..a0b11f35395f 100644
@@ -451,6 +451,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	struct bpf_link *link;
 	struct perf_bpf_filter_entry *entry;
 	bool needs_idx_hash = !target__has_cpu(target);
+	DECLARE_LIBBPF_OPTS(bpf_perf_event_opts, pe_opts,
+			    .dont_enable = true);
 
 	entry = calloc(MAX_FILTERS, sizeof(*entry));
 	if (entry == NULL)
@@ -522,7 +524,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	prog = skel->progs.perf_sample_filter;
 	for (x = 0; x < xyarray__max_x(evsel->core.fd); x++) {
 		for (y = 0; y < xyarray__max_y(evsel->core.fd); y++) {
-			link = bpf_program__attach_perf_event(prog, FD(evsel, x, y));
+			link = bpf_program__attach_perf_event_opts(prog, FD(evsel, x, y),
+								   &pe_opts);
 			if (IS_ERR(link)) {
 				pr_err("Failed to attach perf sample-filter program\n");
 				ret = PTR_ERR(link);
Signature · 1 line
2.50.1
maintainer Acked-by on v4 2/2
#4 lore raw

Re: [PATCH v4 2/2] perf bpf-filter: Enable events manually

Hello,

Quoted 124 lines · Ilya Leoshkevich

On s390, and, in general, on all platforms where the respective event supports auxiliary data gathering, the command:

   # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.011 MB perf.data ]
   # ./perf report --stats | grep SAMPLE
   #

does not generate samples in the perf.data file. On x86 the command:

  # sudo perf record -e intel_pt// -u 0 ls

is broken too.

Looking at the sequence of calls in 'perf record' reveals this behavior:

1. The event 'cycles' is created and enabled:

   record__open()
   +-> evlist__apply_filters()
       +-> perf_bpf_filter__prepare()
	   +-> bpf_program.attach_perf_event()
	       +-> bpf_program.attach_perf_event_opts()
	           +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)

   The event 'cycles' is enabled and active now. However the event's
   ring-buffer to store the samples generated by hardware is not
   allocated yet.

2. The event's fd is mmap()ed to create the ring buffer:

   record__open()
   +-> record__mmap()
       +-> record__mmap_evlist()
	   +-> evlist__mmap_ex()
	       +-> perf_evlist__mmap_ops()
	           +-> mmap_per_cpu()
	               +-> mmap_per_evsel()
	                   +-> mmap__mmap()
	                       +-> perf_mmap__mmap()
	                           +-> mmap()

   This allocates the ring buffer for the event 'cycles'. With mmap()
   the kernel creates the ring buffer:

   perf_mmap(): kernel function to create the event's ring
   |            buffer to save the sampled data.
   |
   +-> ring_buffer_attach(): Allocates memory for ring buffer.
       |        The PMU has auxiliary data setup function. The
       |        has_aux(event) condition is true and the PMU's
       |        stop() is called to stop sampling. It is not
       |        restarted:
       |
       |        if (has_aux(event))
       |                perf_event_stop(event, 0);
       |
       +-> cpumsf_pmu_stop():

   Hardware sampling is stopped. No samples are generated and saved
   anymore.

3. After the event 'cycles' has been mapped, the event is enabled a second time in:

   __cmd_record()
   +-> evlist__enable()
       +-> __evlist__enable()
	   +-> evsel__enable_cpu()
	       +-> perf_evsel__enable_cpu()
	           +-> perf_evsel__run_ioctl()
	               +-> perf_evsel__ioctl()
	                   +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)

   The second

      ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);

   is just a NOP in this case. The first invocation in (1.) sets the
   event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions

   perf_ioctl()
   +-> _perf_ioctl()
       +-> _perf_event_enable()
           +-> __perf_event_enable()

   return immediately because event::state is already set to
   PERF_EVENT_STATE_ACTIVE.

This happens on s390, because the event 'cycles' offers the possibility to save auxilary data. The PMU callbacks setup_aux() and free_aux() are defined. Without both callback functions, cpumsf_pmu_stop() is not invoked and sampling continues.

To remedy this, remove the first invocation of

   ioctl(..., PERF_EVENT_IOC_ENABLE, ...).

in step (1.) Create the event in step (1.) and enable it in step (3.) after the ring buffer has been mapped.

Output after:

 # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
 [ perf record: Woken up 3 times to write data ]
 [ perf record: Captured and wrote 0.876 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      16200  (99.5%)
              SAMPLE events:      16200
 #

The software event succeeded both before and after the patch:

 # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
					  ./perf test -w thloop 2
 [ perf record: Woken up 7 times to write data ]
 [ perf record: Captured and wrote 2.870 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      53506  (99.8%)
              SAMPLE events:      53506
 #
Quoted 6 lines
Fixes b4c658d4d63d61 ("perf target: Remove uid from target")

Thanks,
Namhyung

Quoted 30 lines
---
 tools/perf/util/bpf-filter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/perf/util/bpf-filter.c +4 -1
index d0e013eeb0f7..a0b11f35395f 100644
@@ -451,6 +451,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	struct bpf_link *link;
 	struct perf_bpf_filter_entry *entry;
 	bool needs_idx_hash = !target__has_cpu(target);
+	DECLARE_LIBBPF_OPTS(bpf_perf_event_opts, pe_opts,
+			    .dont_enable = true);
 
 	entry = calloc(MAX_FILTERS, sizeof(*entry));
 	if (entry == NULL)
@@ -522,7 +524,8 @@ int perf_bpf_filter__prepare(struct evsel *evsel, struct target *target)
 	prog = skel->progs.perf_sample_filter;
 	for (x = 0; x < xyarray__max_x(evsel->core.fd); x++) {
 		for (y = 0; y < xyarray__max_y(evsel->core.fd); y++) {
-			link = bpf_program__attach_perf_event(prog, FD(evsel, x, y));
+			link = bpf_program__attach_perf_event_opts(prog, FD(evsel, x, y),
+								   &pe_opts);
 			if (IS_ERR(link)) {
 				pr_err("Failed to attach perf sample-filter program\n");
 				ret = PTR_ERR(link);
Signature · 1 line
2.50.1
#5 lore raw

Re: [PATCH v4 2/2] perf bpf-filter: Enable events manually

Quoted 128 lines · Namhyung Kim

Hello,

Quoted 124 lines · Ilya Leoshkevich

On s390, and, in general, on all platforms where the respective event supports auxiliary data gathering, the command:

   # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.011 MB perf.data ]
   # ./perf report --stats | grep SAMPLE
   #

does not generate samples in the perf.data file. On x86 the command:

  # sudo perf record -e intel_pt// -u 0 ls

is broken too.

Looking at the sequence of calls in 'perf record' reveals this behavior:

1. The event 'cycles' is created and enabled:

   record__open()
   +-> evlist__apply_filters()
       +-> perf_bpf_filter__prepare()
         +-> bpf_program.attach_perf_event()
             +-> bpf_program.attach_perf_event_opts()
                 +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)

   The event 'cycles' is enabled and active now. However the event's
   ring-buffer to store the samples generated by hardware is not
   allocated yet.

2. The event's fd is mmap()ed to create the ring buffer:

   record__open()
   +-> record__mmap()
       +-> record__mmap_evlist()
         +-> evlist__mmap_ex()
             +-> perf_evlist__mmap_ops()
                 +-> mmap_per_cpu()
                     +-> mmap_per_evsel()
                         +-> mmap__mmap()
                             +-> perf_mmap__mmap()
                                 +-> mmap()

   This allocates the ring buffer for the event 'cycles'. With mmap()
   the kernel creates the ring buffer:

   perf_mmap(): kernel function to create the event's ring
   |            buffer to save the sampled data.
   |
   +-> ring_buffer_attach(): Allocates memory for ring buffer.
       |        The PMU has auxiliary data setup function. The
       |        has_aux(event) condition is true and the PMU's
       |        stop() is called to stop sampling. It is not
       |        restarted:
       |
       |        if (has_aux(event))
       |                perf_event_stop(event, 0);
       |
       +-> cpumsf_pmu_stop():

   Hardware sampling is stopped. No samples are generated and saved
   anymore.

3. After the event 'cycles' has been mapped, the event is enabled a second time in:

   __cmd_record()
   +-> evlist__enable()
       +-> __evlist__enable()
         +-> evsel__enable_cpu()
             +-> perf_evsel__enable_cpu()
                 +-> perf_evsel__run_ioctl()
                     +-> perf_evsel__ioctl()
                         +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)

   The second

      ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);

   is just a NOP in this case. The first invocation in (1.) sets the
   event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions

   perf_ioctl()
   +-> _perf_ioctl()
       +-> _perf_event_enable()
           +-> __perf_event_enable()

   return immediately because event::state is already set to
   PERF_EVENT_STATE_ACTIVE.

This happens on s390, because the event 'cycles' offers the possibility to save auxilary data. The PMU callbacks setup_aux() and free_aux() are defined. Without both callback functions, cpumsf_pmu_stop() is not invoked and sampling continues.

To remedy this, remove the first invocation of

   ioctl(..., PERF_EVENT_IOC_ENABLE, ...).

in step (1.) Create the event in step (1.) and enable it in step (3.) after the ring buffer has been mapped.

Output after:

 # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
 [ perf record: Woken up 3 times to write data ]
 [ perf record: Captured and wrote 0.876 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      16200  (99.5%)
              SAMPLE events:      16200
 #

The software event succeeded both before and after the patch:

 # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
                                        ./perf test -w thloop 2
 [ perf record: Woken up 7 times to write data ]
 [ perf record: Captured and wrote 2.870 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      53506  (99.8%)
              SAMPLE events:      53506
 #
Quoted 8 lines
Quoted 6 lines
Fixes b4c658d4d63d61 ("perf target: Remove uid from target")

Do you mind if I take the whole set through the bpf tree ?

I'm planning to send bpf PR in a couple days, so by -rc1 all trees will see the fix.

maintainer
#6 lore raw

Re: [PATCH v4 2/2] perf bpf-filter: Enable events manually

Hi Alexei,

Quoted 136 lines · Alexei Starovoitov
Quoted 135 lines · Namhyung Kim

Hello,

Quoted 130 lines · Ilya Leoshkevich

On s390, and, in general, on all platforms where the respective event supports auxiliary data gathering, the command:

   # ./perf record -u 0 -aB --synth=no -- ./perf test -w thloop
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.011 MB perf.data ]
   # ./perf report --stats | grep SAMPLE
   #

does not generate samples in the perf.data file. On x86 the command:

  # sudo perf record -e intel_pt// -u 0 ls

is broken too.

Looking at the sequence of calls in 'perf record' reveals this behavior:

1. The event 'cycles' is created and enabled:

   record__open()
   +-> evlist__apply_filters()
       +-> perf_bpf_filter__prepare()
         +-> bpf_program.attach_perf_event()
             +-> bpf_program.attach_perf_event_opts()
                 +-> __GI___ioctl(..., PERF_EVENT_IOC_ENABLE, ...)

   The event 'cycles' is enabled and active now. However the event's
   ring-buffer to store the samples generated by hardware is not
   allocated yet.

2. The event's fd is mmap()ed to create the ring buffer:

   record__open()
   +-> record__mmap()
       +-> record__mmap_evlist()
         +-> evlist__mmap_ex()
             +-> perf_evlist__mmap_ops()
                 +-> mmap_per_cpu()
                     +-> mmap_per_evsel()
                         +-> mmap__mmap()
                             +-> perf_mmap__mmap()
                                 +-> mmap()

   This allocates the ring buffer for the event 'cycles'. With mmap()
   the kernel creates the ring buffer:

   perf_mmap(): kernel function to create the event's ring
   |            buffer to save the sampled data.
   |
   +-> ring_buffer_attach(): Allocates memory for ring buffer.
       |        The PMU has auxiliary data setup function. The
       |        has_aux(event) condition is true and the PMU's
       |        stop() is called to stop sampling. It is not
       |        restarted:
       |
       |        if (has_aux(event))
       |                perf_event_stop(event, 0);
       |
       +-> cpumsf_pmu_stop():

   Hardware sampling is stopped. No samples are generated and saved
   anymore.

3. After the event 'cycles' has been mapped, the event is enabled a second time in:

   __cmd_record()
   +-> evlist__enable()
       +-> __evlist__enable()
         +-> evsel__enable_cpu()
             +-> perf_evsel__enable_cpu()
                 +-> perf_evsel__run_ioctl()
                     +-> perf_evsel__ioctl()
                         +-> __GI___ioctl(., PERF_EVENT_IOC_ENABLE, .)

   The second

      ioctl(fd, PERF_EVENT_IOC_ENABLE, 0);

   is just a NOP in this case. The first invocation in (1.) sets the
   event::state to PERF_EVENT_STATE_ACTIVE. The kernel functions

   perf_ioctl()
   +-> _perf_ioctl()
       +-> _perf_event_enable()
           +-> __perf_event_enable()

   return immediately because event::state is already set to
   PERF_EVENT_STATE_ACTIVE.

This happens on s390, because the event 'cycles' offers the possibility to save auxilary data. The PMU callbacks setup_aux() and free_aux() are defined. Without both callback functions, cpumsf_pmu_stop() is not invoked and sampling continues.

To remedy this, remove the first invocation of

   ioctl(..., PERF_EVENT_IOC_ENABLE, ...).

in step (1.) Create the event in step (1.) and enable it in step (3.) after the ring buffer has been mapped.

Output after:

 # ./perf record -aB --synth=no -u 0 -- ./perf test -w thloop 2
 [ perf record: Woken up 3 times to write data ]
 [ perf record: Captured and wrote 0.876 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      16200  (99.5%)
              SAMPLE events:      16200
 #

The software event succeeded both before and after the patch:

 # ./perf record -e cpu-clock -aB --synth=no -u 0 -- \
                                        ./perf test -w thloop 2
 [ perf record: Woken up 7 times to write data ]
 [ perf record: Captured and wrote 2.870 MB perf.data ]
 # ./perf  report --stats | grep SAMPLE
              SAMPLE events:      53506  (99.8%)
              SAMPLE events:      53506
 #
Fixes b4c658d4d63d61 ("perf target: Remove uid from target")
Quoted 6 lines
Quoted 1 line

Do you mind if I take the whole set through the bpf tree ?

I'm planning to send bpf PR in a couple days, so by -rc1 all trees will see the fix.

Sure, I don't think we have conflicting changes and we'll sync perf-tools-next once -rc1 is released.

Thanks,
Namhyung