ASoC: dt-bindings: realtek,alc5623: convert to DT schema
Subsystems (3)
PATCH v5 1/1 ASoC: dt-bindings: realtek,alc5623: convert to DT schema
Convert alc5623 audio codec binding to DT schema.
Also add "realtek,alc5621" to the compatible list for existing use in kirkwood-t5325.dts.
---
Changes in v5:
- Add "realtek,alc5621" with explanation in commit message
- Update title to remove alc5622
- Drop "realtek,alc5622" as it is not used
Changes in v4:
- Add "realtek,alc5621" and "realtek,alc5622" to compatible list
Changes in v3:
- Drop allOf, just use $ref for uint32
- Remove stray '>' in descriptions
- Fix subject to "to DT schema"
Changes in v2:
- Add dai-common ref
- Switch add-ctrl/jack-det-ctrl to allOf uint32
- Use unevaluatedProperties
- Fix example compatible
--- .../devicetree/bindings/sound/alc5623.txt | 25 --------- .../bindings/sound/realtek,alc5623.yaml | 54 +++++++++++++++++++ 2 files changed, 54 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/alc5623.txt create mode 100644 Documentation/devicetree/bindings/sound/realtek,alc5623.yaml
Documentation/devicetree/bindings/sound/alc5623.txt deleted +0 -25
@@ -1,25 +0,0 @@ -ALC5621/ALC5622/ALC5623 audio Codec - -Required properties: - - - compatible: "realtek,alc5623" - - reg: the I2C address of the device. - -Optional properties: - - - add-ctrl: Default register value for Reg-40h, Additional Control - Register. If absent or has the value of 0, the - register is untouched. - - - jack-det-ctrl: Default register value for Reg-5Ah, Jack Detect - Control Register. If absent or has value 0, the - register is untouched. - -Example: - - alc5621: alc5621@1a { - compatible = "alc5621"; - reg = <0x1a>; - add-ctrl = <0x3700>; - jack-det-ctrl = <0x4810>; - };
Documentation/devicetree/bindings/sound/realtek,alc5623.yaml new file +54 -0
54 lines not on this page · raw message
Signature · 1 line
2.50.1
Quoted 6 lines · Mahdi Khosravi
Convert alc5623 audio codec binding to DT schema.
Also add "realtek,alc5621" to the compatible list for existing use in
kirkwood-t5325.dts.Signed-off-by Mahdi Khosravi <[email protected]>
Best regards,
Krzysztof
Mark Brown
maintainerQuoted 6 lines · Mahdi Khosravi
Convert alc5623 audio codec binding to DT schema.
Also add "realtek,alc5621" to the compatible list for existing use in
kirkwood-t5325.dts.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: realtek,alc5623: convert to DT schema
commit: 8c02c8353460f8630313aef6810f34e134a3c1ee
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark