arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
cover arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
Add new device tree and binding for the Samsung Galaxy S20 FE
4G/5G phone (SM-G980/SM-G981B)
It features 6GB/8GB of RAM, 128GB/256GB UFS and also has 4G/5G variants.
For now, this device tree covers those variants as they have the same codename and RAM is assigned from the bootloader.
Best regards,
Eric
Eric Gonçalves (2):
dt-bindings: arm: qcom: document r8q board binding
arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
.../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 3 files changed, 49 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
Signature · 1 line
2.50.1
PATCH 1/2 dt-bindings: arm: qcom: document r8q board binding
Add binding for the Samsung Galaxy S20 FE 4G/5G (SM-G980/SM-G981B) board,
codenamed R8Q,
which is based on the Qualcomm Snapdragon 865 SoC.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/qcom.yaml +1 -0
@@ -1076,6 +1076,7 @@ properties: - qcom,qrb5165-rb5 - qcom,sm8250-hdk - qcom,sm8250-mtp + - samsung,r8q - sony,pdx203-generic - sony,pdx206-generic - xiaomi,elish
Signature · 1 line
2.50.1
Re: [PATCH v1 1/2] dt-bindings: arm: qcom: document r8q board binding
Quoted 9 lines · Eric Gonçalves
Add binding for the Samsung Galaxy S20 FE 4G/5G (SM-G980/SM-G981B) board,
codenamed R8Q,
which is based on the Qualcomm Snapdragon 865 SoC.Signed-off-by Eric Gonçalves <[email protected]>--- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
PATCH 2/2 arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
In reply to Eric GonçalvesAdd new device support for the Samsung Galaxy S20 FE 4G/5G
(SM-G980/SM-G981B) phone
What works:
- SimpleFB
- Pstore/ramoops
--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -275,6 +275,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb
arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts new file +47 -0
47 lines not on this page · raw message
Signature · 1 line
2.50.1
Quoted 6 lines · Eric Gonçalves
Add new device support for the Samsung Galaxy S20 FE 4G/5G
(SM-G980/SM-G981B) phoneWhat works:
- SimpleFB
- Pstore/ramoops
While the patch is correct, are there any obstacles in enabling more devices on the phone? I'd say, buttons, remoteprocs, PCI and USB peripherals should be low hanging fruits. If you can read pmic_array from debugfs/qcom_socinfo, then you should be able to identify PMICs and add corresponding regulators too.
Quoted 6 lines
Signed-off-by Eric Gonçalves <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
Signature · 2 lines
With best wishes Dmitry
Quoted 8 lines · Dmitry Baryshkov
Quoted 6 lines · Eric Gonçalves
Add new device support for the Samsung Galaxy S20 FE 4G/5G
(SM-G980/SM-G981B) phoneWhat works:
- SimpleFB
- Pstore/ramoops
Quoted 13 lines
While the patch is correct, are there any obstacles in enabling more devices on the phone? I'd say, buttons, remoteprocs, PCI and USB peripherals should be low hanging fruits. If you can read
pmic_arrayfrom debugfs/qcom_socinfo, then you should be able to identify PMICs and add corresponding regulators too.Quoted 6 lines
Signed-off-by Eric Gonçalves <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
Hello Dmitry,
Recently my device's battery stopped responding and I was not able to work on the DT any further, so I decided to upstream what I already have so far. Thanks for the feedback, I'll include more features on future patches.
Best regards,
Eric
Dmitry Baryshkov
Reviewed-byQuoted 24 lines · Eric Gonçalves
Quoted 8 lines · Dmitry Baryshkov
Quoted 6 lines · Eric Gonçalves
Add new device support for the Samsung Galaxy S20 FE 4G/5G
(SM-G980/SM-G981B) phoneWhat works:
- SimpleFB
- Pstore/ramoopsQuoted 13 lines
While the patch is correct, are there any obstacles in enabling more devices on the phone? I'd say, buttons, remoteprocs, PCI and USB peripherals should be low hanging fruits. If you can read
pmic_arrayfrom debugfs/qcom_socinfo, then you should be able to identify PMICs and add corresponding regulators too.Quoted 6 lines
Signed-off-by Eric Gonçalves <[email protected]>--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
Quoted 7 lines
Hello Dmitry,
Recently my device's battery stopped responding and I was not able to work on the DT any further, so I decided to upstream what I already have so far. Thanks for the feedback, I'll include more features on future patches.
Thanks!
For this patch:
Signature · 2 lines
With best wishes Dmitry
Quoted 10 lines · Eric Gonçalves
Add new device tree and binding for the Samsung Galaxy S20 FE
4G/5G phone (SM-G980/SM-G981B)
It features 6GB/8GB of RAM, 128GB/256GB UFS and also has 4G/5G variants.
For now, this device tree covers those variants as they have the same codename and RAM is assigned from the bootloader.Best regards,
Eric[...]
Applied, thanks!
[1/2] dt-bindings: arm: qcom: document r8q board binding
commit: 5fa902fb5716f419915fdb11c6b7e62f5ba7d14f
[2/2] arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
commit: 6657fe9e9f23b1c61d0bcc14a3af732f92fdc19bBest regards,
Signature · 1 line
Bjorn Andersson <[email protected]>