arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
Status from this message: Applied, thanks!
Get series with b4
b4 am [email protected]Versions newest first
Patches in v1 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | dt-bindings: arm: qcom: document r8q board bindingDocumentation/ | +1 | 1 reply | |
| 2/2 | arm64: dts: qcom: add initial support for Samsung Galaxy S20 FEarch/ arch/ | +48 | 3 replies |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Dmitry Baryshkov | Rob Herring (Arm) |
|---|---|---|
| 1/2 | A-b | |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v1 0/2] arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
Add new device tree and binding for the Samsung Galaxy S20 FE
4G/5G phone (SM-G980/SM-G981B)
It features 6GB/8GB of RAM, 128GB/256GB UFS and also has 4G/5G variants.
For now, this device tree covers those variants as they have the same codename and RAM is assigned from the bootloader.
Best regards,
Eric
Eric Gonçalves (2):
dt-bindings: arm: qcom: document r8q board binding
arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE
.../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-samsung-r8q.dts | 47 +++++++++++++++++++ 3 files changed, 49 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
Signature · 1 line
2.50.1