dt-bindings: mfd: Fix typos in PMIC/BBNSM documentation
Subsystems (2)
v2 cover dt-bindings: mfd: Fix typos in PMIC/BBNSM documentation
This patch series contains minor typo fixes in the Device Tree bindings documentation for MFD nodes, including PMIC and BBNSM descriptions. These corrections improve readability and ensure consistent documentation for developers using these bindings.
This series builds upon and complements the previous v1 patch:
https://lore.kernel.org/all/[email protected]/
The patches include:
1. dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation
- Corrected "Intergrates" -> "integrates" in documentation for RTC & ON/OFF control.
2. dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in comment
- Corrected "contolling" -> "controlling" in comment about SoC shutdown and PMIC control.
3. dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
- Corrected "abd" -> "and" to improve readability and avoid confusion.
All patches have been signed-off appropriately. One patch is co-developed, and the others are authored and signed-off by Nick Huang.
These changes are purely documentation fixes and have no functional impact.
Nick Huang (3):
dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation
dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation
Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml | 2 +- Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 2 +- Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
2.48.1
PATCH v2 1/3 dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
Correct a typo in the documentation by replacing "abd" with the correct word "and". This improves readability and avoids confusion in the description.
--- Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +1 -1
@@ -41,7 +41,7 @@ properties: clock-output-names: maxItems: 1 -# The BD71847 abd BD71850 support two different HW states as reset target +# The BD71847 and BD71850 support two different HW states as reset target # states. States are called as SNVS and READY. At READY state all the PMIC # power outputs go down and OTP is reload. At the SNVS state all other logic # and external devices apart from the SNVS power domain are shut off. Please
Signature · 1 line
2.48.1
Re: [PATCH v2 1/3] dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
Quoted 6 lines · Nick Huang
Correct a typo in the documentation by replacing "abd" with the correct word "and". This improves readability and avoids confusion in the description.
Co-developed-by Nick Huang <[email protected]>Signed-off-by Nick Huang <[email protected]>Signed-off-by Johnson Huang <[email protected]>
Two people developed a typo patch? No. They did not...
<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.
You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time.
Please kindly resend and include all necessary To/Cc entries. </form letter>
Best regards,
Krzysztof
PATCH v2 2/3 dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation
In reply to Nick HuangCorrect a misspelling in comment: "contolling" should be "controlling" which refers to shutting down the SOC and controlling the PMIC
--- Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml +1 -1
@@ -27,7 +27,7 @@ properties: description: The PMIC provides intb and errb IRQ lines. The errb IRQ line is used for fatal IRQs which will cause the PMIC to shut down power outputs. - In many systems this will shut down the SoC contolling the PMIC and + In many systems this will shut down the SoC controlling the PMIC and connecting/handling the errb can be omitted. However, there are cases where the SoC is not powered by the PMIC or has a short time backup energy to handle shutdown of critical hardware. In that case it may be
Signature · 1 line
2.48.1
Re: [PATCH v2 2/3] dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation
Quoted 4 lines · Nick Huang
Correct a misspelling in comment: "contolling" should be "controlling" which refers to shutting down the SOC and controlling the PMIC
Signed-off-by Nick Huang <[email protected]>
Don't send such patches one by one. It's huge churn. I already asked you to fix all MFD bindings at once, so in one patch.
Best regards,
Krzysztof
PATCH v2 3/3 dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation
In reply to Nick HuangCorrect the spelling of "Intergrates" -> "integrates" in documentation
--- Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml +1 -1
@@ -11,7 +11,7 @@ maintainers: description: | NXP BBNSM serves as non-volatile logic and storage for the system. - it Intergrates RTC & ON/OFF control. + It integrates RTC & ON/OFF control. The RTC can retain its state and continues counting even when the main chip is power down. A time alarm is generated once the most significant 32 bits of the real-time counter match the value in the
Signature · 1 line
2.48.1