Skip to contentSkip to conversation

dt-bindings: mfd: Fix typos in PMIC/BBNSM documentation

PATCH Superseded Nick Huang 2 participants 6 messages Sep 6, 2025

Subsystems (2)
lore
Share & tools
lore

Nick Huang

author
#0 lore raw

v2 cover dt-bindings: mfd: Fix typos in PMIC/BBNSM documentation

This patch series contains minor typo fixes in the Device Tree bindings documentation for MFD nodes, including PMIC and BBNSM descriptions. These corrections improve readability and ensure consistent documentation for developers using these bindings.

This series builds upon and complements the previous v1 patch:
https://lore.kernel.org/all/[email protected]/

The patches include:

1. dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation
- Corrected "Intergrates" -> "integrates" in documentation for RTC & ON/OFF control.

2. dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in comment
- Corrected "contolling" -> "controlling" in comment about SoC shutdown and PMIC control.

3. dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
- Corrected "abd" -> "and" to improve readability and avoid confusion.

All patches have been signed-off appropriately. One patch is co-developed, and the others are authored and signed-off by Nick Huang.

These changes are purely documentation fixes and have no functional impact.

Nick Huang (3):
dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation
dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation
dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation

 Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml         | 2 +-
 Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 2 +-
 Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
2.48.1
author
#1 lore raw

PATCH v2 1/3 dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation

Correct a typo in the documentation by replacing "abd" with the correct word "and". This improves readability and avoids confusion in the description.

---
 Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml +1 -1
index d783cc4e4e..d16c82e398 100644
@@ -41,7 +41,7 @@ properties:
   clock-output-names:
     maxItems: 1
 
-# The BD71847 abd BD71850 support two different HW states as reset target
+# The BD71847 and BD71850 support two different HW states as reset target
 # states. States are called as SNVS and READY. At READY state all the PMIC
 # power outputs go down and OTP is reload. At the SNVS state all other logic
 # and external devices apart from the SNVS power domain are shut off. Please
Signature · 1 line
2.48.1
#2 lore raw

Re: [PATCH v2 1/3] dt-bindings: mfd: rohm,bd71847-pmic: Fix typo in documentation

Quoted 6 lines · Nick Huang

Correct a typo in the documentation by replacing "abd" with the correct word "and". This improves readability and avoids confusion in the description.

Two people developed a typo patch? No. They did not...

<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline) or work on fork of kernel (don't, instead use mainline). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.

You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time.

Please kindly resend and include all necessary To/Cc entries. </form letter>

Best regards,
Krzysztof

author
#3 lore raw

PATCH v2 2/3 dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation

In reply to Nick Huang

Correct a misspelling in comment: "contolling" should be "controlling" which refers to shutting down the SOC and controlling the PMIC

---
 Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/rohm,bd96802-pmic.yaml +1 -1
index 6cbea796d1..9772d43b39 100644
@@ -27,7 +27,7 @@ properties:
     description:
       The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
       for fatal IRQs which will cause the PMIC to shut down power outputs.
-      In many systems this will shut down the SoC contolling the PMIC and
+      In many systems this will shut down the SoC controlling the PMIC and
       connecting/handling the errb can be omitted. However, there are cases
       where the SoC is not powered by the PMIC or has a short time backup
       energy to handle shutdown of critical hardware. In that case it may be
Signature · 1 line
2.48.1
#4 lore raw

Re: [PATCH v2 2/3] dt-bindings: mfd: rohm,bd96802-pmic: Fix typo in documentation

Quoted 4 lines · Nick Huang

Correct a misspelling in comment: "contolling" should be "controlling" which refers to shutting down the SOC and controlling the PMIC

Don't send such patches one by one. It's huge churn. I already asked you to fix all MFD bindings at once, so in one patch.

Best regards,
Krzysztof

author
#5 lore raw

PATCH v2 3/3 dt-bindings: mfd: nxp,bbnsm: Fix typo in documentation

In reply to Nick Huang

Correct the spelling of "Intergrates" -> "integrates" in documentation

---
 Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml +1 -1
index b1ade64a15..1705812f2d 100644
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   NXP BBNSM serves as non-volatile logic and storage for the system.
-  it Intergrates RTC & ON/OFF control.
+  It integrates RTC & ON/OFF control.
   The RTC can retain its state and continues counting even when the
   main chip is power down. A time alarm is generated once the most
   significant 32 bits of the real-time counter match the value in the
Signature · 1 line
2.48.1