Skip to contentSkip to conversation

Improve usage of 'ret' variable and make pcf_doAdress() void

PATCH New Cezar Chiru 1 participant 3 messages Oct 23, 2025 I2C subsystem host drivers

lore
Share & tools
lore
#0 lore raw

cover Improve usage of 'ret' variable and make pcf_doAdress() void

Hello maintainers,

This patch series is a response to Change Requests made by Andi Shyti on [PATCH v7 0/3] i2c: pcf8584: Fix errors and warnings reported by checkpatch and more specific on PATCH: i2c: pcf8584: Move 'ret' variable inside for loop, break if ret < 0.
Also a comment from Andy Shevchenko about using goto instead of break since the goto was used in other error path branches so it makes sense to be consistent.

Patches are dependent on each other that's why the need for a new patch series.

Change Requests:
-remove initialization of 'ret' variable inside for loop of pcf_xfer() as it is not needed
-change pcf_doAddress() function type from int to void as it always returns 0.

Testing:
*built kernel and modules with I2C_ALGOPCF=m and my 2 patches applied on top of 6.18.0-rc1.
*installed kernel and external modules generated by build on my laptop *rebooted and loaded i2c-algo-pcf.ko without i2c_debug parameter. *when loading the .ko with i2c_debug parameter an error is seen in dmesg and this is expected as the parameter was removed.
*No success message related to i2c_algo_pcf was seen in dmesg but also no failures.
*Module loading and unloading successful.
*No PCF8584 Hardware was available

Cezar Chiru (2):
i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret <

    0.

i2c: pcf8584: Make pcf_doAddress() function void

 drivers/i2c/algos/i2c-algo-pcf.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--
2.43.0

#1 lore raw

PATCH 1/2 i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.

Require spaces around '=' and '<'. Add spaces around binary operators. Enforce error fixing based on checkpatch.pl output on file. Move 'ret' variable inside for loop. Then check if (ret < 0) goto out. This improves usage of ret variable.

---
 drivers/i2c/algos/i2c-algo-pcf.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/i2c/algos/i2c-algo-pcf.c +8 -4
index 41a81d37e880..06b9fd355bff 100644
@@ -183,7 +183,7 @@ static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	int wrcount, status, timeout;
 
-	for (wrcount=0; wrcount<count; ++wrcount) {
+	for (wrcount = 0; wrcount < count; ++wrcount) {
 		i2c_outb(adap, buf[wrcount]);
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
@@ -272,7 +272,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	struct i2c_msg *pmsg;
 	int i;
-	int ret=0, timeout, status;
+	int timeout, status;
 
 	if (adap->xfer_begin)
 		adap->xfer_begin(adap->data);
@@ -284,9 +284,10 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		goto out;
 	}
 
-	for (i = 0;ret >= 0 && i < num; i++) {
-		pmsg = &msgs[i];
+	for (i = 0; i < num; i++) {
+		int ret;
 
+		pmsg = &msgs[i];
 		ret = pcf_doAddress(adap, pmsg);
 
 		/* Send START */
@@ -321,6 +322,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
 					    (i + 1 == num));
 		}
+
+		if (ret < 0)
+			goto out;
 	}
 
 out:
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/2 i2c: pcf8584: Make pcf_doAddress() function void

In reply to Cezar Chiru

Change pcf_doAddress() function's type from int to void as it is always returns 0. This way there is no need for extra assignment and extra checks when the function is called.
Remove assignment of pcf_doAddress() and replace it with a simple function call.

---
 drivers/i2c/algos/i2c-algo-pcf.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/i2c/algos/i2c-algo-pcf.c +2 -4
index 06b9fd355bff..6352314e48ed 100644
@@ -253,7 +253,7 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
 }
 
 
-static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
+static void pcf_doAddress(struct i2c_algo_pcf_data *adap,
 			 struct i2c_msg *msg)
 {
 	unsigned char addr = i2c_8bit_addr_from_msg(msg);
@@ -261,8 +261,6 @@ static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
 	if (msg->flags & I2C_M_REV_DIR_ADDR)
 		addr ^= 1;
 	i2c_outb(adap, addr);
-
-	return 0;
 }
 
 static int pcf_xfer(struct i2c_adapter *i2c_adap,
@@ -288,7 +286,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		int ret;
 
 		pmsg = &msgs[i];
-		ret = pcf_doAddress(adap, pmsg);
+		pcf_doAddress(adap, pmsg);
 
 		/* Send START */
 		if (i == 0)

--
2.43.0