Skip to contentSkip to conversation

Indiedroid Nova Devicetree Updates

PATCH Applied Chris Morgan 3 participants 11 messages Nov 5, 2025 – Nov 6, 2025

Subsystems (2)

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Indiedroid Nova Devicetree Updates

From: Chris Morgan <[email protected]>

This series fixes up a few remaining issues with the devicetree for the Indiedroid Nova. Namely it adds or updates a few pinctrl definitions, it removes a few workarounds that no longer appear to be necessary for eMMC and bluetooth, it adds support for the NPU, and it sets the device type as embedded.

Chris Morgan (5):
arm64: dts: rockchip: Add device type for Indiedroid Nova.
arm64: dts: rockchip: Add Additional pinctrl defs for Indiedroid Nova
arm64: dts: rockchip: enable NPU on Indiedroid Nova
arm64: dts: rockchip: Enable HS400 for Indiedroid Nova
arm64: dts: rockchip: Fix DMA for Indiedroid Nova Bluetooth

 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 85 ++++++++++++++-----
 1 file changed, 65 insertions(+), 20 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/5 arm64: dts: rockchip: Add device type for Indiedroid Nova.

From: Chris Morgan <[email protected]>

Update the devicetree node to note the device category of the Indiedroid Nova as an embedded device.

---
 arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +1 -0
index 4ec7bc4a9e96..debab7732b71 100644
@@ -11,6 +11,7 @@
 
 / {
 	model = "Indiedroid Nova";
+	chassis-type = "embedded";
 	compatible = "indiedroid,nova", "rockchip,rk3588s";
 
 	adc-keys-0 {
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/5 arm64: dts: rockchip: Add Additional pinctrl defs for Indiedroid Nova

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

Define the pinctrl nodes for the WiFi interrupts, correct the pinctrl for the ethernet according to the schematic, and add the clk32k_in control for the RTC. Add the correct regulator mapping for the PCIE too.

---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 43 ++++++++++++-------
 1 file changed, 28 insertions(+), 15 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +28 -15
index debab7732b71..f40782b6c7db 100644
@@ -406,7 +406,7 @@ rtc_hym8563: rtc@51 {
 		clock-output-names = "hym8563";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&hym8563_int>;
+		pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
 		pinctrl-names = "default";
 		wakeup-source;
 	};
@@ -459,8 +459,11 @@ &i2s5_8ch {
 };
 
 &pcie2x1l2 {
-	pinctrl-0 = <&rtl8111_perstb>;
+	pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
+		    <&pcie20x1m0_waken>;
 	pinctrl-names = "default";
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
 	status = "okay";
 };
 
@@ -486,12 +489,6 @@ bt_wake_host: bt-wake-host {
 		};
 	};
 
-	ethernet-pins {
-		rtl8111_perstb: rtl8111-perstb {
-			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	hym8563 {
 
 		hym8563_int: hym8563-int {
@@ -500,13 +497,6 @@ hym8563_int: hym8563-int {
 		};
 	};
 
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins =
-				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	usb-typec {
 		usbc0_int: usbc0-int {
 			rockchip,pins =
@@ -518,6 +508,18 @@ typec5v_pwren: typec5v-pwren {
 				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &saradc {
@@ -538,6 +540,7 @@ &sdhci {
 };
 
 &sdio {
+	#address-cells = <1>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -549,9 +552,19 @@ &sdio {
 	no-sd;
 	non-removable;
 	sd-uhs-sdr104;
+	#size-cells = <0>;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
 };
 
 &sdmmc {
Signature · 1 line
2.43.0
maintainer
#3 lore raw

Re: [PATCH 2/5] arm64: dts: rockchip: Add Additional pinctrl defs for Indiedroid Nova

Hi Chris,

Am Mittwoch, 5. November 2025, 21:57:05 Mitteleuropäische Normalzeit schrieb Chris Morgan:

Quoted 6 lines

From: Chris Morgan <[email protected]>

Define the pinctrl nodes for the WiFi interrupts, correct the pinctrl for the ethernet according to the schematic, and add the clk32k_in control for the RTC. Add the correct regulator mapping for the PCIE too.

way too much completely different things to stuff into one patch.

- Adding the sdio wifi is one
- ethernet is next ... you're not fixing, but removing the pinctrl?
- pcie2 fixes is another one
- and the clkin32k as well

Heiko

Quoted 107 lines
---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 43 ++++++++++++-------
 1 file changed, 28 insertions(+), 15 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +28 -15
index debab7732b71..f40782b6c7db 100644
@@ -406,7 +406,7 @@ rtc_hym8563: rtc@51 {
 		clock-output-names = "hym8563";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&hym8563_int>;
+		pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
 		pinctrl-names = "default";
 		wakeup-source;
 	};
@@ -459,8 +459,11 @@ &i2s5_8ch {
 };
 
 &pcie2x1l2 {
-	pinctrl-0 = <&rtl8111_perstb>;
+	pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
+		    <&pcie20x1m0_waken>;
 	pinctrl-names = "default";
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
 	status = "okay";
 };
 
@@ -486,12 +489,6 @@ bt_wake_host: bt-wake-host {
 		};
 	};
 
-	ethernet-pins {
-		rtl8111_perstb: rtl8111-perstb {
-			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	hym8563 {
 
 		hym8563_int: hym8563-int {
@@ -500,13 +497,6 @@ hym8563_int: hym8563-int {
 		};
 	};
 
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins =
-				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	usb-typec {
 		usbc0_int: usbc0-int {
 			rockchip,pins =
@@ -518,6 +508,18 @@ typec5v_pwren: typec5v-pwren {
 				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &saradc {
@@ -538,6 +540,7 @@ &sdhci {
 };
 
 &sdio {
+	#address-cells = <1>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -549,9 +552,19 @@ &sdio {
 	no-sd;
 	non-removable;
 	sd-uhs-sdr104;
+	#size-cells = <0>;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
 };
 
 &sdmmc {
#4 lore raw

Re: [PATCH 2/5] arm64: dts: rockchip: Add Additional pinctrl defs for Indiedroid Nova

Quoted 11 lines · Heiko Stuebner

Hi Chris,

Am Mittwoch, 5. November 2025, 21:57:05 Mitteleuropäische Normalzeit schrieb Chris Morgan:

Quoted 6 lines

From: Chris Morgan <[email protected]>

Define the pinctrl nodes for the WiFi interrupts, correct the pinctrl for the ethernet according to the schematic, and add the clk32k_in control for the RTC. Add the correct regulator mapping for the PCIE too.

way too much completely different things to stuff into one patch.

Sorry, to me this seemed like a few tiny fixes that, excluding the pcie regulator addition, all related to correcting pinctrl definitions. I'll be happy to split it up if need be. The SDIO wifi is really just adding the interrupt pin... there was just a bit of stuff to add on top so I could define it correctly; for ethernet I'm replacing the reset pin with the PCIE port reset pin and adding other PCIE pins defined in the schematic, and the clk32k_in is just adding another pin to note that the RTC output is connected to that pin.

Thank you,
Chris

Quoted 120 lines

- Adding the sdio wifi is one
- ethernet is next ... you're not fixing, but removing the pinctrl?
- pcie2 fixes is another one
- and the clkin32k as well

Heiko

Quoted 107 lines
---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 43 ++++++++++++-------
 1 file changed, 28 insertions(+), 15 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +28 -15
index debab7732b71..f40782b6c7db 100644
@@ -406,7 +406,7 @@ rtc_hym8563: rtc@51 {
 		clock-output-names = "hym8563";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-0 = <&hym8563_int>;
+		pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
 		pinctrl-names = "default";
 		wakeup-source;
 	};
@@ -459,8 +459,11 @@ &i2s5_8ch {
 };
 
 &pcie2x1l2 {
-	pinctrl-0 = <&rtl8111_perstb>;
+	pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
+		    <&pcie20x1m0_waken>;
 	pinctrl-names = "default";
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
 	status = "okay";
 };
 
@@ -486,12 +489,6 @@ bt_wake_host: bt-wake-host {
 		};
 	};
 
-	ethernet-pins {
-		rtl8111_perstb: rtl8111-perstb {
-			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
-		};
-	};
-
 	hym8563 {
 
 		hym8563_int: hym8563-int {
@@ -500,13 +497,6 @@ hym8563_int: hym8563-int {
 		};
 	};
 
-	sdio-pwrseq {
-		wifi_enable_h: wifi-enable-h {
-			rockchip,pins =
-				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	usb-typec {
 		usbc0_int: usbc0-int {
 			rockchip,pins =
@@ -518,6 +508,18 @@ typec5v_pwren: typec5v-pwren {
 				<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	wifi {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_host_wake_irq: wifi-host-wake-irq {
+			rockchip,pins =
+				<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
 };
 
 &saradc {
@@ -538,6 +540,7 @@ &sdhci {
 };
 
 &sdio {
+	#address-cells = <1>;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -549,9 +552,19 @@ &sdio {
 	no-sd;
 	non-removable;
 	sd-uhs-sdr104;
+	#size-cells = <0>;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
 };
 
 &sdmmc {
#5 lore raw

PATCH 3/5 arm64: dts: rockchip: enable NPU on Indiedroid Nova

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

Enable the NPU on the Indiedroid Nova.

---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +34 -0
index f40782b6c7db..62c8c8f68713 100644
@@ -471,6 +471,10 @@ &pd_gpu {
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	bluetooth-pins {
 		bt_reset: bt-reset {
@@ -522,6 +526,36 @@ wifi_host_wake_irq: wifi-host-wake-irq {
 	};
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcca_1v8_s0>;
 	status = "okay";
Signature · 1 line
2.43.0
#6 lore raw

PATCH 4/5 arm64: dts: rockchip: Enable HS400 for Indiedroid Nova

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

Once the DLL_STRBIN_TAPNUM_DEFAULT is set to the correct value [1], the workaround to ensure stable eMMC operation is no longer needed. I have observed testing this that hdparm went from:
"Timing buffered disk reads: 502 MB in 3.00 seconds = 167.14 MB/sec" to the following:
"Timing buffered disk reads: 832 MB in 3.00 seconds = 277.32 MB/sec"

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/mmc/host/sdhci-of-dwcmshc.c?id=a28352cf2d2f8380e7aca8cb61682396dca7a991

Fixes 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
---
 arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +2 -2
index 62c8c8f68713..0796ba6d2504 100644
@@ -561,10 +561,10 @@ &saradc {
 	status = "okay";
 };
 
-/* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;
-	no-mmc-hs400;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	no-sd;
 	no-sdio;
 	non-removable;
Signature · 1 line
2.43.0
maintainer
#7 lore raw

Re: [PATCH 4/5] arm64: dts: rockchip: Enable HS400 for Indiedroid Nova

Am Mittwoch, 5. November 2025, 21:57:07 Mitteleuropäische Normalzeit schrieb Chris Morgan:

Quoted 9 lines

From: Chris Morgan <[email protected]>

Once the DLL_STRBIN_TAPNUM_DEFAULT is set to the correct value [1], the workaround to ensure stable eMMC operation is no longer needed. I have observed testing this that hdparm went from:
"Timing buffered disk reads: 502 MB in 3.00 seconds = 167.14 MB/sec" to the following:
"Timing buffered disk reads: 832 MB in 3.00 seconds = 277.32 MB/sec"

Quoted 3 lines

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/mmc/host/sdhci-of-dwcmshc.c?id=a28352cf2d2f8380e7aca8cb61682396dca7a991

Fixes 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")

This needs the patch you linked to, to actually work, so I'll drop the fixes tag when applying, because this should likely not be backported to older kernels.

Same reasoning for patch 5.

Heiko

Quoted 23 lines
---
 arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +2 -2
index 62c8c8f68713..0796ba6d2504 100644
@@ -561,10 +561,10 @@ &saradc {
 	status = "okay";
 };
 
-/* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;
-	no-mmc-hs400;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	no-sd;
 	no-sdio;
 	non-removable;
#8 lore raw

Re: [PATCH 4/5] arm64: dts: rockchip: Enable HS400 for Indiedroid Nova

Quoted 12 lines · Heiko Stuebner

Am Mittwoch, 5. November 2025, 21:57:07 Mitteleuropäische Normalzeit schrieb Chris Morgan:

Quoted 11 lines

From: Chris Morgan <[email protected]>

Once the DLL_STRBIN_TAPNUM_DEFAULT is set to the correct value [1], the workaround to ensure stable eMMC operation is no longer needed. I have observed testing this that hdparm went from:
"Timing buffered disk reads: 502 MB in 3.00 seconds = 167.14 MB/sec" to the following:
"Timing buffered disk reads: 832 MB in 3.00 seconds = 277.32 MB/sec"

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/mmc/host/sdhci-of-dwcmshc.c?id=a28352cf2d2f8380e7aca8cb61682396dca7a991

Quoted 7 lines
Quoted 1 line
Fixes 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")

This needs the patch you linked to, to actually work, so I'll drop the fixes tag when applying, because this should likely not be backported to older kernels.

Same reasoning for patch 5.

Thank you, I wasn't sure about that or not. I can say with certanty you don't want the eMMC device tree changes prior to that patch going through or bad things will happen.

Chris

Quoted 31 lines

Heiko

Quoted 23 lines
---
 arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +2 -2
index 62c8c8f68713..0796ba6d2504 100644
@@ -561,10 +561,10 @@ &saradc {
 	status = "okay";
 };
 
-/* HS400 modes seemed to cause io errors. */
 &sdhci {
 	bus-width = <8>;
-	no-mmc-hs400;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
 	no-sd;
 	no-sdio;
 	non-removable;
#9 lore raw

PATCH 5/5 arm64: dts: rockchip: Fix DMA for Indiedroid Nova Bluetooth

In reply to Chris Morgan

From: Chris Morgan <[email protected]>

When the device was first added, there was a problem with the bluetooth controller that manifested when DMA was enabled for the underlying UART interface. At some point in the intervening time the problem appears to have been resolved. Add the UART rx and tx channels back to re-enable UART.

Fixes 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
---
 arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 3 ---
 1 file changed, 3 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +0 -3
index 0796ba6d2504..dee053afc6b6 100644
@@ -944,12 +944,9 @@ &uart2 {
 	status = "okay";
 };
 
-/* DMA seems to interfere with bluetooth device normal operation. */
 &uart9 {
 	pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
 	pinctrl-names = "default";
-	/delete-property/ dma-names;
-	/delete-property/ dmas;
 	uart-has-rtscts;
 	status = "okay";
 
Signature · 1 line
2.43.0
maintainer Applied
#10 lore raw

Re: (subset) [PATCH 0/5] Indiedroid Nova Devicetree Updates

In reply to Chris Morgan
Quoted 6 lines · Chris Morgan

This series fixes up a few remaining issues with the devicetree for the Indiedroid Nova. Namely it adds or updates a few pinctrl definitions, it removes a few workarounds that no longer appear to be necessary for eMMC and bluetooth, it adds support for the NPU, and it sets the device type as embedded.

Quoted 8 lines

Chris Morgan (5):
arm64: dts: rockchip: Add device type for Indiedroid Nova.
arm64: dts: rockchip: Add Additional pinctrl defs for Indiedroid Nova
arm64: dts: rockchip: enable NPU on Indiedroid Nova
arm64: dts: rockchip: Enable HS400 for Indiedroid Nova
arm64: dts: rockchip: Fix DMA for Indiedroid Nova Bluetooth

[...]

Applied, thanks!

[1/5] arm64: dts: rockchip: Add device type for Indiedroid Nova.

      commit: 318bc4b5ad229435abbb7b9a7c8b1876fae311e7
[3/5] arm64: dts: rockchip: enable NPU on Indiedroid Nova
      commit: dfa4f7f5cb2c66fac5a17d63e5fcf1bf50ea7344
[4/5] arm64: dts: rockchip: Enable HS400 for Indiedroid Nova
      commit: cce837b7a3599dc83cd9c08afc07b076f127354b
[5/5] arm64: dts: rockchip: Fix DMA for Indiedroid Nova Bluetooth
      commit: c6c76445c30bb73fd4cfba8f4742e642dcfe90f5

Best regards,

Signature · 1 line
Heiko Stuebner <[email protected]>