arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
From: Chris Morgan <[email protected]>
Enable the Display Port alt-mode for the USB-C port on the Indiedroid Nova.
Note that while ROCKCHIP_VOP2_EP_DP0 is defined as 10 we need to set the address to "a" or else we receive a dtc warning.
Signed-off-by Chris Morgan <[email protected]>
--- .../dts/rockchip/rk3588s-indiedroid-nova.dts | 80 ++++++++++++++++--- 1 file changed, 67 insertions(+), 13 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +67 -13
@@ -190,6 +190,22 @@ &cpu_b3 { cpu-supply = <&vdd_cpu_big1_s0>; }; +&dp0 { + status = "okay"; +}; + +&dp0_in { + dp0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dp0>; + }; +}; + +&dp0_out { + dp0_out_con: endpoint { + remote-endpoint = <&usbdp_phy0_dp_in>; + }; +}; + /* * Add labels for each GPIO pin exposed on the 40 pin header. Note that * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
@@ -371,28 +387,36 @@ usb_con: connector { sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>; op-sink-microwatt = <1000000>; + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0xffffffff>; + }; + }; + + ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; - usbc0_orien_sw: endpoint { - remote-endpoint = <&usbdp_phy0_orientation_switch>; + usbc0_hs: endpoint { + remote-endpoint = <&usb_host0_xhci_hs>; }; }; port@1 { reg = <1>; - usbc0_role_sw: endpoint { - remote-endpoint = <&dwc3_0_role_switch>; + usbc0_ss: endpoint { + remote-endpoint = <&usbdp_phy0_ss_out>; }; }; port@2 { reg = <2>; - dp_altmode_mux: endpoint { - remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; + usbc0_sbu: endpoint { + remote-endpoint = <&usbdp_phy0_dp_out>; }; }; };
@@ -973,9 +997,22 @@ &usb_host0_xhci { usb-role-switch; status = "okay"; - port { - dwc3_0_role_switch: endpoint { - remote-endpoint = <&usbc0_role_sw>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + usb_host0_xhci_hs: endpoint { + remote-endpoint = <&usbc0_hs>; + }; + }; + + port@1 { + reg = <1>; + usb_host0_xhci_ss: endpoint { + remote-endpoint = <&usbdp_phy0_ss_in>; + }; }; }; };
@@ -1004,14 +1041,24 @@ port { #address-cells = <1>; #size-cells = <0>; - usbdp_phy0_orientation_switch: endpoint@0 { + usbdp_phy0_ss_out: endpoint@0 { reg = <0>; - remote-endpoint = <&usbc0_orien_sw>; + remote-endpoint = <&usbc0_ss>; }; - usbdp_phy0_dp_altmode_mux: endpoint@1 { + usbdp_phy0_ss_in: endpoint@1 { reg = <1>; - remote-endpoint = <&dp_altmode_mux>; + remote-endpoint = <&usb_host0_xhci_ss>; + }; + + usbdp_phy0_dp_in: endpoint@2 { + reg = <2>; + remote-endpoint = <&dp0_out_con>; + }; + + usbdp_phy0_dp_out: endpoint@3 { + reg = <3>; + remote-endpoint = <&usbc0_sbu>; }; }; };
@@ -1030,3 +1077,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_dp0: endpoint@a { + reg = <ROCKCHIP_VOP2_EP_DP0>; + remote-endpoint = <&dp0_in_vp1>; + }; +};
Signature · 1 line
2.43.0
Quoted 8 lines · Chris Morgan
Enable the Display Port alt-mode for the USB-C port on the Indiedroid Nova.
Note that while
ROCKCHIP_VOP2_EP_DP0is defined as 10 we need to set the address to "a" or else we receive a dtc warning.[...]
Applied, thanks!
[1/1] arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova
commit: 7230cdc1fc3cd1b6721df1dbf46c1e2403042203
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>