Skip to contentSkip to conversation

arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova

PATCH Applied Chris Morgan 2 participants 2 messages Nov 7, 2025 – Nov 13, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova

From: Chris Morgan <[email protected]>

Enable the Display Port alt-mode for the USB-C port on the Indiedroid Nova.

Note that while ROCKCHIP_VOP2_EP_DP0 is defined as 10 we need to set the address to "a" or else we receive a dtc warning.

---
 .../dts/rockchip/rk3588s-indiedroid-nova.dts  | 80 ++++++++++++++++---
 1 file changed, 67 insertions(+), 13 deletions(-)
arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +67 -13
index dee053afc6b6..174d299cc6bb 100644
@@ -190,6 +190,22 @@ &cpu_b3 {
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&dp0 {
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&usbdp_phy0_dp_in>;
+	};
+};
+
 /*
  * Add labels for each GPIO pin exposed on the 40 pin header. Note that
  * voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
@@ -371,28 +387,36 @@ usb_con: connector {
 			sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
 			op-sink-microwatt = <1000000>;
 
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
 				port@0 {
 					reg = <0>;
-					usbc0_orien_sw: endpoint {
-						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_hs>;
 					};
 				};
 
 				port@1 {
 					reg = <1>;
-					usbc0_role_sw: endpoint {
-						remote-endpoint = <&dwc3_0_role_switch>;
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_ss_out>;
 					};
 				};
 
 				port@2 {
 					reg = <2>;
-					dp_altmode_mux: endpoint {
-						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_out>;
 					};
 				};
 			};
@@ -973,9 +997,22 @@ &usb_host0_xhci {
 	usb-role-switch;
 	status = "okay";
 
-	port {
-		dwc3_0_role_switch: endpoint {
-			remote-endpoint = <&usbc0_role_sw>;
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb_host0_xhci_hs: endpoint {
+				remote-endpoint = <&usbc0_hs>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb_host0_xhci_ss: endpoint {
+				remote-endpoint = <&usbdp_phy0_ss_in>;
+			};
 		};
 	};
 };
@@ -1004,14 +1041,24 @@ port {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		usbdp_phy0_orientation_switch: endpoint@0 {
+		usbdp_phy0_ss_out: endpoint@0 {
 			reg = <0>;
-			remote-endpoint = <&usbc0_orien_sw>;
+			remote-endpoint = <&usbc0_ss>;
 		};
 
-		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+		usbdp_phy0_ss_in: endpoint@1 {
 			reg = <1>;
-			remote-endpoint = <&dp_altmode_mux>;
+			remote-endpoint = <&usb_host0_xhci_ss>;
+		};
+
+		usbdp_phy0_dp_in: endpoint@2 {
+			reg = <2>;
+			remote-endpoint = <&dp0_out_con>;
+		};
+
+		usbdp_phy0_dp_out: endpoint@3 {
+			reg = <3>;
+			remote-endpoint = <&usbc0_sbu>;
 		};
 	};
 };
@@ -1030,3 +1077,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp1 {
+	vp1_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp1>;
+	};
+};
Signature · 1 line
2.43.0
maintainer Applied
#1 lore raw
Quoted 8 lines · Chris Morgan

Enable the Display Port alt-mode for the USB-C port on the Indiedroid Nova.

Note that while ROCKCHIP_VOP2_EP_DP0 is defined as 10 we need to set the address to "a" or else we receive a dtc warning.

[...]

Applied, thanks!

[1/1] arm64: dts: rockchip: Enable USB-C DP Alt for Indiedroid Nova

      commit: 7230cdc1fc3cd1b6721df1dbf46c1e2403042203

Best regards,

Signature · 1 line
Heiko Stuebner <[email protected]>