Skip to contentSkip to conversation

Fix Several Test Failures

PATCH In review Andrew Hamilton 2 participants 5 messages Nov 14, 2025 – Nov 16, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v7 cover Fix Several Test Failures

Correct several test failures observed while running GRUB 'make check' on Debian 13. The test failures fixed here are:

1. ZFS ZSTD - Test was failing zfs_test due to lack of support in zfs-fuse for zstd compression. This specific test case was split into a new test file allowing failing early if zstd is
not supported to avoid masking other possible (future) zfs test failures.
2. Correct test failure in erofs_test in newer Linux distros caused by a change in mkfs.erofs to limit the maximum file system label length to 15 characters. Reduce the label used for testing to work within this limit.
3. Correct test failure in ext234_test in newer Linux distros caused by a change in e2fsprogs that removed the ability to set "version 0" ext2 file systems using the "-r" flag. Instead a new flag is added to support this. Update the test to support the old method in older distros and the new method in newer distros.

Changes since v6:
- Add '-q' option to grep commands to avoid output to stdout.
- Combine multiple piped greps into one in zfs_zstd_test

Changes since v5:
- Change return code from 77 to 99 in zstd test

Changes since v4:
- Change return code from 99 to 77 in zstd test

Changes since v3:
- Rebase changes against current master branch.

Changes since v2:
- Change return code from 77 to 99 in zstd test

Changes since v1:
- Remove unrelated changes to .gitignore

Andrew Hamilton (3):
tests: Split ZFS ZSTD Test Into New File
tests: Avoid Test Failure in erofs for label length
tests: Support Changed mkfs.ext2 Behavior for -r Flag

 .gitignore                   |  1 +
 Makefile.util.def            |  6 ++++++
 tests/util/grub-fs-tester.in | 13 ++++++++++---
 tests/zfs_test.in            |  1 -
 tests/zfs_zstd_test.in       | 30 ++++++++++++++++++++++++++++++
 5 files changed, 47 insertions(+), 4 deletions(-)
 create mode 100644 tests/zfs_zstd_test.in
Signature · 7 lines
2.43.0


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
#1 lore raw

PATCH v7 1/3 tests: Split ZFS ZSTD Test Into New File

Split ZFS ZSTD test into its own test script. Add a check to the new test script to see if the zfs utility installed on the host supports "zstd" compression before running the test and fail the test if not. It seems at least some zfs-fuse binaries do not support zstd compression and the current test will fail in that case. Splitting into a new file will avoid masking other test failures due to missing zstd support.

---
 .gitignore             |  1 +
 Makefile.util.def      |  6 ++++++
 tests/zfs_test.in      |  1 -
 tests/zfs_zstd_test.in | 30 ++++++++++++++++++++++++++++++
 4 files changed, 37 insertions(+), 1 deletion(-)
 create mode 100644 tests/zfs_zstd_test.in
.gitignore +1 -0
index 524f2e6d0..67ad2d26d 100644
@@ -283,3 +283,4 @@ widthspec.bin
 /xfs_test
 /xzcompress_test
 /zfs_test
+/zfs_zstd_test
Makefile.util.def +6 -0
index 91720e627..7b91c0b61 100644
@@ -914,6 +914,12 @@ script = {
   common = tests/zfs_test.in;
 };
 
+script = {
+  testcase = native;
+  name = zfs_zstd_test;
+  common = tests/zfs_zstd_test.in;
+};
+
 script = {
   testcase = native;
   name = cpio_test;
tests/zfs_test.in +0 -1
index e1cb766a5..cd547b4d2 100644
@@ -19,7 +19,6 @@ fi
 "@builddir@/grub-fs-tester" zfs_lzjb
 "@builddir@/grub-fs-tester" zfs_gzip
 "@builddir@/grub-fs-tester" zfs_zle
-"@builddir@/grub-fs-tester" zfs_zstd
 "@builddir@/grub-fs-tester" zfs_raidz3
 "@builddir@/grub-fs-tester" zfs_raidz2
 "@builddir@/grub-fs-tester" zfs_raidz
tests/zfs_zstd_test.in new file +30 -0
new file mode 100644
index 000000000..8cafceaaf
@@ -0,0 +1,30 @@
+#!@BUILD_SHEBANG@
+
+set -e
+
+if [ "x$EUID" = "x" ] ; then
+  EUID=`id -u`
+fi
+
+if [ "$EUID" != 0 ] ; then
+   exit 99
+fi
+
+if ! which zpool >/dev/null 2>&1; then
+   echo "zpool not installed; cannot test zfs."
+   exit 99
+fi
+
+if ! which zfs >/dev/null 2>&1; then
+   echo "zfs not installed; cannot test zfs."
+   exit 99
+fi
+
+# If ZFS ZSTD compression is not supported (as is the case with zfs-fuse
+# for example at the time of writing) then fail early the ZSTD compression testing.
+if ! zfs get 2>&1 | grep -q "compression.*zstd"; then
+   echo "zfs zstd compression not supported; cannot test zfs zstd."
+   exit 99
+fi
+
+"@builddir@/grub-fs-tester" zfs_zstd
Signature · 7 lines
2.43.0


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
#2 lore raw

PATCH v7 2/3 tests: Avoid Test Failure in erofs for label length

In reply to Andrew Hamilton

Recently, mkfs.erofs began to enforce that the file system label is 15 characters or less (exluding NULL terminator). This causes the current erofs test in GRUB to fail. Reduce the test label used to fit in this limit allowing the test to work as expected.

---
 tests/util/grub-fs-tester.in | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
tests/util/grub-fs-tester.in +5 -2
index 2302c2ab1..54add3b73 100644
@@ -386,9 +386,12 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" "$MAXLOGSECSIZE" 1); do
 		    FSLABEL="g;/_é䏌䐓䏕䎛䎾䏴кит u"
 		    #FSLABEL="g;/_é莭莽😁кит u"
 		    ;;
-		# FS LIMITATION: reiserfs, extN, jfs and erofs label is at most 16 UTF-8 characters
-		x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"luks"* | x"mdraid"* | x"jfs" | x"jfs_caseins" | x"erofs_"*)
+		# FS LIMITATION: reiserfs, extN, and jfs label is at most 16 UTF-8 characters
+		x"reiserfs_old" | x"reiserfs" | x"ext"* | x"lvm"* | x"luks"* | x"mdraid"* | x"jfs" | x"jfs_caseins")
 		    FSLABEL="g;/éт 莭😁";;
+		# FS LIMITATION: erofs label is at most 15 UTF-8 characters
+		x"erofs_"*)
+		    FSLABEL="g;/é 莭😁";;
 		# FS LIMITATION: No underscore, space, semicolon, slash or international characters in UFS* in label. Limited to 32 UTF-8 characters
 		x"ufs1" | x"ufs1_sun" | x"ufs2")
 		    FSLABEL="grubtest""ieurrucnenreeiurueurewf";;
Signature · 7 lines
2.43.0


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
#3 lore raw

PATCH v7 3/3 tests: Support Changed mkfs.ext2 Behavior for -r Flag

In reply to Andrew Hamilton

Correct nuisance ext234_test failure on newer Linux distros.

Recently, the mkfs.ext2 utility removed support for the -r flag to specify old (version 0) formats of ext2. A new flag was added to allow the same behavior. Support both ways of specifying version 0 ext2 file systems when testing ext2 in GRUB.

---
 tests/util/grub-fs-tester.in | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
tests/util/grub-fs-tester.in +5 -1
index 54add3b73..9a13f87a3 100644
@@ -880,7 +880,11 @@ for LOGSECSIZE in $(range "$MINLOGSECSIZE" "$MAXLOGSECSIZE" 1); do
 		xnilfs2)
 		    "mkfs.nilfs2" -L "$FSLABEL" -b $BLKSIZE  -q "${MOUNTDEVICE}" ;;
 		xext2_old)
-		    MKE2FS_DEVICE_SECTSIZE=$SECSIZE "mkfs.ext2" -r 0 -b $BLKSIZE -L "$FSLABEL" -q "${MOUNTDEVICE}"
+                    if "mkfs.ext2" -r 0 2>&1 | grep -q -F "the -r option has been removed"; then
+                        MKE2FS_DEVICE_SECTSIZE=$SECSIZE "mkfs.ext2" -E revision=0 -b $BLKSIZE -L "$FSLABEL" -q "${MOUNTDEVICE}"
+                    else
+                        MKE2FS_DEVICE_SECTSIZE=$SECSIZE "mkfs.ext2" -r 0 -b $BLKSIZE -L "$FSLABEL" -q "${MOUNTDEVICE}"
+                    fi
 		    MOUNTFS=ext2
 		    ;;
 		xext4_metabg)
Signature · 7 lines
2.43.0


_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel
Reviewed-by on the v7 series
#4 lore raw
In reply to Andrew Hamilton
Quoted 16 lines · On Fri, 14 Nov 2025 17:40:07 -0600 Andrew Hamilton <[email protected]> wrote:

Correct several test failures observed while running GRUB 'make check' on Debian 13. The test failures fixed here are:

1. ZFS ZSTD - Test was failing zfs_test due to lack of support in zfs-fuse for zstd compression. This specific test case was split into a new test file allowing failing early if zstd is
not supported to avoid masking other possible (future) zfs test failures.
2. Correct test failure in erofs_test in newer Linux distros caused by a change in mkfs.erofs to limit the maximum file system label length to 15 characters. Reduce the label used for testing to work within this limit.
3. Correct test failure in ext234_test in newer Linux distros caused by a change in e2fsprogs that removed the ability to set "version 0" ext2 file systems using the "-r" flag. Instead a new flag is added to support this. Update the test to support the old method in older distros and the new method in newer distros.

For all patches,

Glenn

Quoted 25 lines

Changes since v6:
- Add '-q' option to grep commands to avoid output to stdout.
- Combine multiple piped greps into one in zfs_zstd_test

Changes since v5:
- Change return code from 77 to 99 in zstd test

Changes since v4:
- Change return code from 99 to 77 in zstd test

Changes since v3:
- Rebase changes against current master branch.

Changes since v2:
- Change return code from 77 to 99 in zstd test

Changes since v1:
- Remove unrelated changes to .gitignore

Andrew Hamilton (3):
tests: Split ZFS ZSTD Test Into New File
tests: Avoid Test Failure in erofs for label length
tests: Support Changed mkfs.ext2 Behavior for -r Flag

Quoted 8 lines
 .gitignore                   |  1 +
 Makefile.util.def            |  6 ++++++
 tests/util/grub-fs-tester.in | 13 ++++++++++---
 tests/zfs_test.in            |  1 -
 tests/zfs_zstd_test.in       | 30 ++++++++++++++++++++++++++++++
 5 files changed, 47 insertions(+), 4 deletions(-)
 create mode 100644 tests/zfs_zstd_test.in

_______________________________________________
Grub-devel mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/grub-devel