Add device tree support for NXP i.MX95 15x15 FRDM board
Subsystems (2)
v2 cover Add device tree support for NXP i.MX95 15x15 FRDM board
The NXP i.MX95 15x15 FRDM board is a compact and cost-effective development board based on the i.MX95 applications processor.
This patch set adds device tree support for the board:
- Patch 1 introduces the DT compatible string.
- Patch 2 provides the complete device tree description.
---
Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.
Link to v1: https://lore.kernel.org/r/[email protected]
---
Lei Xu (2):
dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board
Documentation/devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 963 +++++++++++++++++++++ 3 files changed, 965 insertions(+)
---
base-commit: 6987d58a9cbc5bd57c983baa514474a86c945d56
change-id: 20251207-127-4e8551e8bdaf
Best regards,
Signature · 1 line
Lei Xu <[email protected]>
PATCH v2 1/2 dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -1432,6 +1432,7 @@ properties: items: - enum: - fsl,imx95-15x15-evk # i.MX95 15x15 EVK Board + - fsl,imx95-15x15-frdm # i.MX95 15x15 FRDM Board - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board - toradex,verdin-imx95-19x19-evk # i.MX95 Verdin Evaluation Kit (EVK) - const: fsl,imx95
Signature · 1 line
2.34.1
Re: [PATCH v2 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
Quoted 7 lines · Lei Xu
Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.
Signed-off-by Lei Xu <[email protected]>
Re: [PATCH v2 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
In reply to Lei XuQuoted 15 lines · Lei Xu
Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM development board, a compact and cost-effective platform based on the i.MX95 applications processor.
Signed-off-by Lei Xu <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/arm/fsl.yaml +0
-0
Documentation/devicetree/bindings/arm/fsl.yaml properties: · line 1438
Quoted 7 lines
Documentation/devicetree/bindings/arm/fsl.yaml +1
-0@@ -1432,6 +1432,7 @@ properties: items: - enum: - fsl,imx95-15x15-evk # i.MX95 15x15 EVK Board + - fsl,imx95-15x15-frdm # i.MX95 15x15 FRDM Board - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board - toradex,verdin-imx95-19x19-evk # i.MX95 Verdin Evaluation Kit (EVK) - const: fsl,imx95
PATCH v2 2/2 arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board
In reply to Lei XuThe i.MX95 15x15 FRDM board is a compact and cost-effective development platform based on the i.MX95 applications processor.
Add device tree support for this board, including:
- LPUART1 and LPUART5
- NETC
- USB
- PCIe
- uSDHC1, uSDHC2 and uSDHC3
- FlexCAN2 and FlexCAN5
- LPI2C2, LPI2C3, LPI2C4 and their child nodes
- Watchdog3
---
Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.
--- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 963 +++++++++++++++++++++ 2 files changed, 964 insertions(+)
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -400,6 +400,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts new file +963 -0
963 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v2 2/2] arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board
Quoted 89 lines · Lei Xu
The i.MX95 15x15 FRDM board is a compact and cost-effective development platform based on the i.MX95 applications processor.
Add device tree support for this board, including:
- LPUART1 and LPUART5
- NETC
- USB
- PCIe
- uSDHC1, uSDHC2 and uSDHC3
- FlexCAN2 and FlexCAN5
- LPI2C2, LPI2C3, LPI2C4 and their child nodes
- Watchdog3Signed-off-by Lei Xu <[email protected]>---
Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removedreg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.--- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 963 +++++++++++++++++++++ 2 files changed, 964 insertions(+)arch/arm64/boot/dts/freescale/Makefile +1
-0@@ -400,6 +400,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtbarch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts new file +47
-0@@ -0,0 +1,963 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2025 NXP + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/phy/phy-imx8-pcie.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> +#include "imx95.dtsi" + +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /*!< PCAL6408A-0 */ +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /*!< PCAL6408A-4 */ +#define BRD_SM_CTRL_BT_WAKE 0x8002 /*!< PCAL6408A-5 */ +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /*!< PCAL6408A-6 */ +#define BRD_SM_CTRL_BUTTON 0x8004 /*!< PCAL6408A-7 */ + +/ { + compatible = "fsl,imx95-15x15-frdm", "fsl,imx95"; + model = "NXP i.MX95 15X15 FRDM board"; + + aliases { + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &lpuart1; + serial4 = &lpuart5; + }; + +
(snip)
arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts line 238
Quoted 12 lines
arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts new file +12
-0+ + sound-micfil { + compatible = "fsl,imx-audio-card"; + model = "micfil-audio"; + + pri-dai-link { + link-name = "micfil hifi"; + format = "i2s"; + + cpu { + sound-dai = <&micfil>; + };
please add a space in between the definitions of the cpu and codec nodes. With that:
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts new file +10
-0+ codec { + sound-dai = <&dmic>; + }; + }; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pcal6524 8 GPIO_ACTIVE_LOW>; + };