FAILED: patch "[PATCH] media: verisilicon: Fix CPU stalls on G2 bus error" failed to apply to 6.6-stable tree
[email protected]
maintainerThe patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 19c286b755072a22a063052f530a6b1fac8a1f63
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026010507-cringe-sterile-73c8@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 19c286b755072a22a063052f530a6b1fac8a1f63 Mon Sep 17 00:00:00 2001
From: Nicolas Dufresne <[email protected]>
Date: Mon, 22 Sep 2025 14:43:38 -0400
Subject: [PATCH] media: verisilicon: Fix CPU stalls on G2 bus error
In some seek stress tests, we are getting IRQ from the G2 decoder where the dec_bus_int and the dec_e bits are high, meaning the decoder is still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we have reached completion and move the software reset to when our software watchdog triggers.
This way, we let the hardware continue on errors when it did not self reset and in worse case scenario the hardware timeout will automatically stop it. The actual error will be fixed in a follow up patch.
drivers/media/platform/verisilicon/hantro_g2.c +67 -17
@@ -5,43 +5,93 @@* Copyright (C) 2021 Collabora Ltd, Andrzej Pietrasiewicz <[email protected]> */ +#include <linux/delay.h> #include "hantro_hw.h" #include "hantro_g2_regs.h" #define G2_ALIGN 16 -void hantro_g2_check_idle (struct hantro_dev *vpu) +static bool hantro_g2_active (struct hantro_ctx *ctx) { -int i; +struct hantro_dev *vpu = ctx->dev; +u32 status; -for (i =0 ; i <3 ; i++) { -u32 status; + status =vdpu_read (vpu,G2_REG_INTERRUPT ); -/* Make sure the VPU is idle */ - status =vdpu_read (vpu,G2_REG_INTERRUPT ); -if (status &G2_REG_INTERRUPT_DEC_E ) { -dev_warn (vpu->dev,"device still running, aborting" ); - status |=G2_REG_INTERRUPT_DEC_ABORT_E |G2_REG_INTERRUPT_DEC_IRQ_DIS ; -vdpu_write (vpu, status,G2_REG_INTERRUPT ); - } +return (status &G2_REG_INTERRUPT_DEC_E ); +} + +/** +* hantro_g2_reset: +* @ctx: the hantro context +* +* Emulates a reset using Hantro abort function. Failing this procedure would +* results in programming a running IP which leads to CPU hang. +* +* Using a hard reset procedure instead is prefferred. +*/ +void hantro_g2_reset (struct hantro_ctx *ctx) +{ +struct hantro_dev *vpu = ctx->dev; +u32 status; + + status =vdpu_read (vpu,G2_REG_INTERRUPT ); +if (status &G2_REG_INTERRUPT_DEC_E ) { +dev_warn_ratelimited (vpu->dev,"device still running, aborting" ); + status |=G2_REG_INTERRUPT_DEC_ABORT_E |G2_REG_INTERRUPT_DEC_IRQ_DIS ; +vdpu_write (vpu, status,G2_REG_INTERRUPT ); + +do { +mdelay (1 ); + }while (hantro_g2_active (ctx)); } }irqreturn_t hantro_g2_irq (int irq,void *dev_id) {struct hantro_dev *vpu = dev_id; -enum vb2_buffer_state state;u32 status; status =vdpu_read (vpu,G2_REG_INTERRUPT ); - state = (status &G2_REG_INTERRUPT_DEC_RDY_INT ) ? -VB2_BUF_STATE_DONE :VB2_BUF_STATE_ERROR ; -vdpu_write (vpu,0 ,G2_REG_INTERRUPT ); -vdpu_write (vpu,G2_REG_CONFIG_DEC_CLK_GATE_E ,G2_REG_CONFIG ); +if (!(status &G2_REG_INTERRUPT_DEC_IRQ )) +return IRQ_NONE ; -hantro_irq_done (vpu, state); +hantro_reg_write (vpu, &g2_dec_irq,0 ); +hantro_reg_write (vpu, &g2_dec_int_stat,0 ); +hantro_reg_write (vpu, &g2_clk_gate_e,1 ); +if (status &G2_REG_INTERRUPT_DEC_RDY_INT ) { +hantro_irq_done (vpu,VB2_BUF_STATE_DONE ); +return IRQ_HANDLED ; + } + +if (status &G2_REG_INTERRUPT_DEC_ABORT_INT ) { +/* disabled on abort, though lets be safe and handle it */ +dev_warn_ratelimited (vpu->dev,"decode operation aborted." ); +return IRQ_HANDLED ; + } + +if (status &G2_REG_INTERRUPT_DEC_LAST_SLICE_INT ) +dev_warn_ratelimited (vpu->dev,"not all macroblocks were decoded." ); + +if (status &G2_REG_INTERRUPT_DEC_BUS_INT ) +dev_warn_ratelimited (vpu->dev,"bus error detected." ); + +if (status &G2_REG_INTERRUPT_DEC_ERROR_INT ) +dev_warn_ratelimited (vpu->dev,"decode error detected." ); + +if (status &G2_REG_INTERRUPT_DEC_TIMEOUT ) +dev_warn_ratelimited (vpu->dev,"frame decode timed out." ); + +/** +* If the decoding haven't stopped, let it continue. The hardware timeout +* will trigger if it is trully stuck. +*/ +if (status &G2_REG_INTERRUPT_DEC_E ) +return IRQ_HANDLED ; + +hantro_irq_done (vpu,VB2_BUF_STATE_ERROR );return IRQ_HANDLED ; }
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +0 -2
@@ -582,8 +582,6 @@ int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)struct hantro_dev *vpu = ctx->dev;int ret; -hantro_g2_check_idle (vpu); -/* Prepare HEVC decoder context. */ ret =hantro_hevc_dec_prepare_run (ctx);if (ret)
drivers/media/platform/verisilicon/hantro_g2_regs.h +13 -0
@@ -22,7 +22,14 @@#define G2_REG_VERSION G2_SWREG(0)#define G2_REG_INTERRUPT G2_SWREG(1) +#define G2_REG_INTERRUPT_DEC_LAST_SLICE_INT BIT(19) +#define G2_REG_INTERRUPT_DEC_TIMEOUT BIT(18) +#define G2_REG_INTERRUPT_DEC_ERROR_INT BIT(16) +#define G2_REG_INTERRUPT_DEC_BUF_INT BIT(14) +#define G2_REG_INTERRUPT_DEC_BUS_INT BIT(13)#define G2_REG_INTERRUPT_DEC_RDY_INT BIT(12) +#define G2_REG_INTERRUPT_DEC_ABORT_INT BIT(11) +#define G2_REG_INTERRUPT_DEC_IRQ BIT(8)#define G2_REG_INTERRUPT_DEC_ABORT_E BIT(5)#define G2_REG_INTERRUPT_DEC_IRQ_DIS BIT(4)#define G2_REG_INTERRUPT_DEC_E BIT(0)
@@ -35,6 +42,9 @@#define BUS_WIDTH_128 2#define BUS_WIDTH_256 3 +#define g2_dec_int_stat G2_DEC_REG(1, 11, 0xf) +#define g2_dec_irq G2_DEC_REG(1, 8, 0x1) +#define g2_strm_swap G2_DEC_REG(2, 28, 0xf)#define g2_strm_swap_old G2_DEC_REG(2, 27, 0x1f)#define g2_pic_swap G2_DEC_REG(2, 22, 0x1f)
@@ -225,6 +235,9 @@#define vp9_filt_level_seg5 G2_DEC_REG(19, 8, 0x3f)#define vp9_quant_seg5 G2_DEC_REG(19, 0, 0xff) +#define g2_timemout_override_e G2_DEC_REG(45, 31, 0x1) +#define g2_timemout_cycles G2_DEC_REG(45, 0, 0x7fffffff) +#define hevc_cur_poc_00 G2_DEC_REG(46, 24, 0xff)#define hevc_cur_poc_01 G2_DEC_REG(46, 16, 0xff)#define hevc_cur_poc_02 G2_DEC_REG(46, 8, 0xff)
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +0 -2
@@ -893,8 +893,6 @@ int hantro_g2_vp9_dec_run(struct hantro_ctx *ctx)struct vb2_v4l2_buffer *dst;int ret; -hantro_g2_check_idle (ctx->dev); - ret =start_prepare_run (ctx, &decode_params);if (ret) {hantro_end_prepare_run (ctx);
drivers/media/platform/verisilicon/hantro_hw.h +1 -0
@@ -583,6 +583,7 @@ void hantro_g2_vp9_dec_done(struct hantro_ctx *ctx);int hantro_vp9_dec_init (struct hantro_ctx *ctx);void hantro_vp9_dec_exit (struct hantro_ctx *ctx);void hantro_g2_check_idle (struct hantro_dev *vpu); +void hantro_g2_reset (struct hantro_ctx *ctx);irqreturn_t hantro_g2_irq (int irq,void *dev_id);#endif /* HANTRO_HW_H_ */
drivers/media/platform/verisilicon/imx8m_vpu_hw.c +2 -0
@@ -294,11 +294,13 @@ static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { [HANTRO_MODE_HEVC_DEC ] = { .run = hantro_g2_hevc_dec_run, + .reset = hantro_g2_reset, .init = hantro_hevc_dec_init, .exit = hantro_hevc_dec_exit, }, [HANTRO_MODE_VP9_DEC ] = { .run = hantro_g2_vp9_dec_run, + .reset = hantro_g2_reset, .done = hantro_g2_vp9_dec_done, .init = hantro_vp9_dec_init, .exit = hantro_vp9_dec_exit,
Sasha Levin
maintainerPATCH 1/3 media: verisilicon: Store chroma and motion vectors offset
From: Benjamin Gaignard <[email protected]>
[ Upstream commit 545bf944f978b7468d3a6bd668d9ff6953bc542e ]
Store computed values of chroma and motion vectors offset because they depends on width and height values which change if the resolution change.
Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")
--- drivers/media/platform/verisilicon/hantro.h | 2 ++ drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c | 6 ++++-- 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/media/platform/verisilicon/hantro.h +2 -0
@@ -328,6 +328,8 @@ struct hantro_vp9_decoded_buffer_info {/* Info needed when the decoded frame serves as a reference frame. */ unsigned short width;unsigned short height; +size_t chroma_offset; +size_t mv_offset; u32 bit_depth : 4; };
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +4 -2
@@ -158,9 +158,11 @@ static void config_output(struct hantro_ctx *ctx, chroma_addr = luma_addr +chroma_offset (ctx, dec_params);hantro_write_addr (ctx->dev,G2_OUT_CHROMA_ADDR , chroma_addr); + dst->vp9.chroma_offset =chroma_offset (ctx, dec_params); mv_addr = luma_addr +mv_offset (ctx, dec_params);hantro_write_addr (ctx->dev,G2_OUT_MV_ADDR , mv_addr); + dst->vp9.mv_offset =mv_offset (ctx, dec_params); }struct hantro_vp9_ref_reg {
@@ -195,7 +197,7 @@ static void config_ref(struct hantro_ctx *ctx, luma_addr =hantro_get_dec_buf_addr (ctx, &buf->base.vb.vb2_buf);hantro_write_addr (ctx->dev, ref_reg->y_base, luma_addr); - chroma_addr = luma_addr +chroma_offset (ctx, dec_params); + chroma_addr = luma_addr + buf->vp9.chroma_offset;hantro_write_addr (ctx->dev, ref_reg->c_base, chroma_addr); }
@@ -238,7 +240,7 @@ static void config_ref_registers(struct hantro_ctx *ctx,config_ref (ctx, dst, &ref_regs[2 ], dec_params, dec_params->alt_frame_ts); mv_addr =hantro_get_dec_buf_addr (ctx, &mv_ref->base.vb.vb2_buf) + -mv_offset (ctx, dec_params); + mv_ref->vp9.mv_offset;hantro_write_addr (ctx->dev,G2_REF_MV_ADDR (0 ), mv_addr); hantro_reg_write(ctx->dev, &vp9_last_sign_bias,
Signature · 1 line
2.51.0
Sasha Levin
maintainerPATCH 2/3 media: verisilicon: g2: Use common helpers to compute chroma and mv offsets
From: Benjamin Gaignard <[email protected]>
[ Upstream commit 3eeaee737dcee3c32e256870dbc2687a2a6fe970 ]
HEVC and VP9 are running on the same hardware and share the same chroma and motion vectors offset constraint.
Create common helpers functions for these computation. Source and destination buffer height may not be the same because alignment constraint are different so use destination height to compute chroma offset because we target this buffer as hardware output.
To be able to use the helpers in both VP9 HEVC code remove dec_params and use context->bit_depth instead.
Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")
--- .../media/platform/verisilicon/hantro_g2.c | 14 ++++++++++ .../platform/verisilicon/hantro_g2_hevc_dec.c | 18 ++----------- .../platform/verisilicon/hantro_g2_vp9_dec.c | 26 +++---------------- .../media/platform/verisilicon/hantro_hw.h | 3 +++ 4 files changed, 23 insertions(+), 38 deletions(-)
drivers/media/platform/verisilicon/hantro_g2.c +14 -0
@@ -8,6 +8,8 @@#include "hantro_hw.h" #include "hantro_g2_regs.h" +#define G2_ALIGN 16 +void hantro_g2_check_idle (struct hantro_dev *vpu) {int i;
@@ -42,3 +44,15 @@ irqreturn_t hantro_g2_irq(int irq, void *dev_id)return IRQ_HANDLED ; } + +size_t hantro_g2_chroma_offset (struct hantro_ctx *ctx) +{ +return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth /8 ; +} + +size_t hantro_g2_motion_vectors_offset (struct hantro_ctx *ctx) +{ +size_t cr_offset =hantro_g2_chroma_offset (ctx); + +return ALIGN ((cr_offset *3 ) /2 ,G2_ALIGN ); +}
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +2 -16
@@ -8,20 +8,6 @@#include "hantro_hw.h" #include "hantro_g2_regs.h" -#define G2_ALIGN 16 - -static size_t hantro_hevc_chroma_offset (struct hantro_ctx *ctx) -{ -return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth /8 ; -} - -static size_t hantro_hevc_motion_vectors_offset (struct hantro_ctx *ctx) -{ -size_t cr_offset =hantro_hevc_chroma_offset (ctx); - -return ALIGN ((cr_offset *3 ) /2 ,G2_ALIGN ); -} -static void prepare_tile_info_buffer (struct hantro_ctx *ctx) {struct hantro_dev *vpu = ctx->dev;
@@ -384,8 +370,8 @@ static int set_ref(struct hantro_ctx *ctx)struct hantro_dev *vpu = ctx->dev;struct vb2_v4l2_buffer *vb2_dst;struct hantro_decoded_buffer *dst; -size_t cr_offset =hantro_hevc_chroma_offset (ctx); -size_t mv_offset =hantro_hevc_motion_vectors_offset (ctx); +size_t cr_offset =hantro_g2_chroma_offset (ctx); +size_t mv_offset =hantro_g2_motion_vectors_offset (ctx);u32 max_ref_frames;u16 dpb_longterm_e;static const struct hantro_reg cur_poc[] = {
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +4 -22
@@ -16,8 +16,6 @@#include "hantro_vp9.h" #include "hantro_g2_regs.h" -#define G2_ALIGN 16 -enum hantro_ref_frames {INTRA_FRAME =0 ,LAST_FRAME =1 ,
@@ -90,22 +88,6 @@ static int start_prepare_run(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_return 0 ; } -static size_t chroma_offset (const struct hantro_ctx *ctx, -const struct v4l2_ctrl_vp9_frame *dec_params) -{ -int bytes_per_pixel = dec_params->bit_depth ==8 ?1 :2 ; - -return ctx->src_fmt.width * ctx->src_fmt.height * bytes_per_pixel; -} - -static size_t mv_offset (const struct hantro_ctx *ctx, -const struct v4l2_ctrl_vp9_frame *dec_params) -{ -size_t cr_offset =chroma_offset (ctx, dec_params); - -return ALIGN ((cr_offset *3 ) /2 ,G2_ALIGN ); -} -static struct hantro_decoded_buffer *get_ref_buf (struct hantro_ctx *ctx,struct vb2_v4l2_buffer *dst,u64 timestamp) {
@@ -156,13 +138,13 @@ static void config_output(struct hantro_ctx *ctx, luma_addr =hantro_get_dec_buf_addr (ctx, &dst->base.vb.vb2_buf);hantro_write_addr (ctx->dev,G2_OUT_LUMA_ADDR , luma_addr); - chroma_addr = luma_addr +chroma_offset (ctx, dec_params); + chroma_addr = luma_addr +hantro_g2_chroma_offset (ctx);hantro_write_addr (ctx->dev,G2_OUT_CHROMA_ADDR , chroma_addr); - dst->vp9.chroma_offset =chroma_offset (ctx, dec_params); + dst->vp9.chroma_offset =hantro_g2_chroma_offset (ctx); - mv_addr = luma_addr +mv_offset (ctx, dec_params); + mv_addr = luma_addr +hantro_g2_motion_vectors_offset (ctx);hantro_write_addr (ctx->dev,G2_OUT_MV_ADDR , mv_addr); - dst->vp9.mv_offset =mv_offset (ctx, dec_params); + dst->vp9.mv_offset =hantro_g2_motion_vectors_offset (ctx); }struct hantro_vp9_ref_reg {
drivers/media/platform/verisilicon/hantro_hw.h +3 -0
@@ -519,6 +519,9 @@ hantro_av1_mv_size(unsigned int width, unsigned int height)return ALIGN (num_sbs *384 ,16 ) *2 +512 ; } +size_t hantro_g2_chroma_offset (struct hantro_ctx *ctx); +size_t hantro_g2_motion_vectors_offset (struct hantro_ctx *ctx); +int hantro_g1_mpeg2_dec_run (struct hantro_ctx *ctx);int rockchip_vpu2_mpeg2_dec_run (struct hantro_ctx *ctx); void hantro_mpeg2_dec_copy_qtable(u8 *qtable,
Signature · 1 line
2.51.0
Sasha Levin
maintainerPATCH 3/3 media: verisilicon: Fix CPU stalls on G2 bus error
In reply to Sasha LevinFrom: Nicolas Dufresne <[email protected]>
[ Upstream commit 19c286b755072a22a063052f530a6b1fac8a1f63 ]
In some seek stress tests, we are getting IRQ from the G2 decoder where the dec_bus_int and the dec_e bits are high, meaning the decoder is still running despite the error.
Fix this by reworking the IRQ handler to only finish the job once we have reached completion and move the software reset to when our software watchdog triggers.
This way, we let the hardware continue on errors when it did not self reset and in worse case scenario the hardware timeout will automatically stop it. The actual error will be fixed in a follow up patch.
--- .../media/platform/verisilicon/hantro_g2.c | 88 +++++++++++++++---- .../platform/verisilicon/hantro_g2_hevc_dec.c | 2 - .../platform/verisilicon/hantro_g2_regs.h | 13 +++ .../platform/verisilicon/hantro_g2_vp9_dec.c | 2 - .../media/platform/verisilicon/hantro_hw.h | 1 + .../media/platform/verisilicon/imx8m_vpu_hw.c | 2 + 6 files changed, 85 insertions(+), 23 deletions(-)
drivers/media/platform/verisilicon/hantro_g2.c +69 -19
@@ -5,43 +5,93 @@* Copyright (C) 2021 Collabora Ltd, Andrzej Pietrasiewicz <[email protected]> */ +#include <linux/delay.h> #include "hantro_hw.h" #include "hantro_g2_regs.h" #define G2_ALIGN 16 -void hantro_g2_check_idle (struct hantro_dev *vpu) +static bool hantro_g2_active (struct hantro_ctx *ctx) { -int i; - -for (i =0 ; i <3 ; i++) { -u32 status; - -/* Make sure the VPU is idle */ - status =vdpu_read (vpu,G2_REG_INTERRUPT ); -if (status &G2_REG_INTERRUPT_DEC_E ) { -dev_warn (vpu->dev,"device still running, aborting" ); - status |=G2_REG_INTERRUPT_DEC_ABORT_E |G2_REG_INTERRUPT_DEC_IRQ_DIS ; -vdpu_write (vpu, status,G2_REG_INTERRUPT ); - } +struct hantro_dev *vpu = ctx->dev; +u32 status; + + status =vdpu_read (vpu,G2_REG_INTERRUPT ); + +return (status &G2_REG_INTERRUPT_DEC_E ); +} + +/** +* hantro_g2_reset: +* @ctx: the hantro context +* +* Emulates a reset using Hantro abort function. Failing this procedure would +* results in programming a running IP which leads to CPU hang. +* +* Using a hard reset procedure instead is prefferred. +*/ +void hantro_g2_reset (struct hantro_ctx *ctx) +{ +struct hantro_dev *vpu = ctx->dev; +u32 status; + + status =vdpu_read (vpu,G2_REG_INTERRUPT ); +if (status &G2_REG_INTERRUPT_DEC_E ) { +dev_warn_ratelimited (vpu->dev,"device still running, aborting" ); + status |=G2_REG_INTERRUPT_DEC_ABORT_E |G2_REG_INTERRUPT_DEC_IRQ_DIS ; +vdpu_write (vpu, status,G2_REG_INTERRUPT ); + +do { +mdelay (1 ); + }while (hantro_g2_active (ctx)); } }irqreturn_t hantro_g2_irq (int irq,void *dev_id) {struct hantro_dev *vpu = dev_id; -enum vb2_buffer_state state;u32 status; status =vdpu_read (vpu,G2_REG_INTERRUPT ); - state = (status &G2_REG_INTERRUPT_DEC_RDY_INT ) ? -VB2_BUF_STATE_DONE :VB2_BUF_STATE_ERROR ; -vdpu_write (vpu,0 ,G2_REG_INTERRUPT ); -vdpu_write (vpu,G2_REG_CONFIG_DEC_CLK_GATE_E ,G2_REG_CONFIG ); +if (!(status &G2_REG_INTERRUPT_DEC_IRQ )) +return IRQ_NONE ; + +hantro_reg_write (vpu, &g2_dec_irq,0 ); +hantro_reg_write (vpu, &g2_dec_int_stat,0 ); +hantro_reg_write (vpu, &g2_clk_gate_e,1 ); + +if (status &G2_REG_INTERRUPT_DEC_RDY_INT ) { +hantro_irq_done (vpu,VB2_BUF_STATE_DONE ); +return IRQ_HANDLED ; + } + +if (status &G2_REG_INTERRUPT_DEC_ABORT_INT ) { +/* disabled on abort, though lets be safe and handle it */ +dev_warn_ratelimited (vpu->dev,"decode operation aborted." ); +return IRQ_HANDLED ; + } + +if (status &G2_REG_INTERRUPT_DEC_LAST_SLICE_INT ) +dev_warn_ratelimited (vpu->dev,"not all macroblocks were decoded." ); + +if (status &G2_REG_INTERRUPT_DEC_BUS_INT ) +dev_warn_ratelimited (vpu->dev,"bus error detected." ); + +if (status &G2_REG_INTERRUPT_DEC_ERROR_INT ) +dev_warn_ratelimited (vpu->dev,"decode error detected." ); + +if (status &G2_REG_INTERRUPT_DEC_TIMEOUT ) +dev_warn_ratelimited (vpu->dev,"frame decode timed out." ); -hantro_irq_done (vpu, state); +/** +* If the decoding haven't stopped, let it continue. The hardware timeout +* will trigger if it is trully stuck. +*/ +if (status &G2_REG_INTERRUPT_DEC_E ) +return IRQ_HANDLED ; +hantro_irq_done (vpu,VB2_BUF_STATE_ERROR );return IRQ_HANDLED ; }
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +0 -2
@@ -567,8 +567,6 @@ int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)struct hantro_dev *vpu = ctx->dev;int ret; -hantro_g2_check_idle (vpu); -/* Prepare HEVC decoder context. */ ret =hantro_hevc_dec_prepare_run (ctx);if (ret)
drivers/media/platform/verisilicon/hantro_g2_regs.h +13 -0
@@ -22,7 +22,14 @@#define G2_REG_VERSION G2_SWREG(0)#define G2_REG_INTERRUPT G2_SWREG(1) +#define G2_REG_INTERRUPT_DEC_LAST_SLICE_INT BIT(19) +#define G2_REG_INTERRUPT_DEC_TIMEOUT BIT(18) +#define G2_REG_INTERRUPT_DEC_ERROR_INT BIT(16) +#define G2_REG_INTERRUPT_DEC_BUF_INT BIT(14) +#define G2_REG_INTERRUPT_DEC_BUS_INT BIT(13)#define G2_REG_INTERRUPT_DEC_RDY_INT BIT(12) +#define G2_REG_INTERRUPT_DEC_ABORT_INT BIT(11) +#define G2_REG_INTERRUPT_DEC_IRQ BIT(8)#define G2_REG_INTERRUPT_DEC_ABORT_E BIT(5)#define G2_REG_INTERRUPT_DEC_IRQ_DIS BIT(4)#define G2_REG_INTERRUPT_DEC_E BIT(0)
@@ -35,6 +42,9 @@#define BUS_WIDTH_128 2#define BUS_WIDTH_256 3 +#define g2_dec_int_stat G2_DEC_REG(1, 11, 0xf) +#define g2_dec_irq G2_DEC_REG(1, 8, 0x1) +#define g2_strm_swap G2_DEC_REG(2, 28, 0xf)#define g2_strm_swap_old G2_DEC_REG(2, 27, 0x1f)#define g2_pic_swap G2_DEC_REG(2, 22, 0x1f)
@@ -225,6 +235,9 @@#define vp9_filt_level_seg5 G2_DEC_REG(19, 8, 0x3f)#define vp9_quant_seg5 G2_DEC_REG(19, 0, 0xff) +#define g2_timemout_override_e G2_DEC_REG(45, 31, 0x1) +#define g2_timemout_cycles G2_DEC_REG(45, 0, 0x7fffffff) +#define hevc_cur_poc_00 G2_DEC_REG(46, 24, 0xff)#define hevc_cur_poc_01 G2_DEC_REG(46, 16, 0xff)#define hevc_cur_poc_02 G2_DEC_REG(46, 8, 0xff)
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +0 -2
@@ -893,8 +893,6 @@ int hantro_g2_vp9_dec_run(struct hantro_ctx *ctx)struct vb2_v4l2_buffer *dst;int ret; -hantro_g2_check_idle (ctx->dev); - ret =start_prepare_run (ctx, &decode_params);if (ret) {hantro_end_prepare_run (ctx);
drivers/media/platform/verisilicon/hantro_hw.h +1 -0
@@ -541,6 +541,7 @@ void hantro_g2_vp9_dec_done(struct hantro_ctx *ctx);int hantro_vp9_dec_init (struct hantro_ctx *ctx);void hantro_vp9_dec_exit (struct hantro_ctx *ctx);void hantro_g2_check_idle (struct hantro_dev *vpu); +void hantro_g2_reset (struct hantro_ctx *ctx);irqreturn_t hantro_g2_irq (int irq,void *dev_id);#endif /* HANTRO_HW_H_ */
drivers/media/platform/verisilicon/imx8m_vpu_hw.c +2 -0
@@ -312,11 +312,13 @@ static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = { [HANTRO_MODE_HEVC_DEC ] = { .run = hantro_g2_hevc_dec_run, + .reset = hantro_g2_reset, .init = hantro_hevc_dec_init, .exit = hantro_hevc_dec_exit, }, [HANTRO_MODE_VP9_DEC ] = { .run = hantro_g2_vp9_dec_run, + .reset = hantro_g2_reset, .done = hantro_g2_vp9_dec_done, .init = hantro_vp9_dec_init, .exit = hantro_vp9_dec_exit,
Signature · 1 line
2.51.0