Skip to contentSkip to conversation

FAILED: patch "[PATCH] media: verisilicon: Fix CPU stalls on G2 bus error" failed to apply to 6.6-stable tree

PATCH New [email protected] 2 participants 4 messages Jan 5

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 19c286b755072a22a063052f530a6b1fac8a1f63
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2026010507-cringe-sterile-73c8@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 19c286b755072a22a063052f530a6b1fac8a1f63 Mon Sep 17 00:00:00 2001
From: Nicolas Dufresne <[email protected]>
Date: Mon, 22 Sep 2025 14:43:38 -0400
Subject: [PATCH] media: verisilicon: Fix CPU stalls on G2 bus error

In some seek stress tests, we are getting IRQ from the G2 decoder where the dec_bus_int and the dec_e bits are high, meaning the decoder is still running despite the error.

Fix this by reworking the IRQ handler to only finish the job once we have reached completion and move the software reset to when our software watchdog triggers.

This way, we let the hardware continue on errors when it did not self reset and in worse case scenario the hardware timeout will automatically stop it. The actual error will be fixed in a follow up patch.

Fixes 3385c514ecc5a ("media: hantro: Convert imx8m_vpu_g2_irq to helper")
drivers/media/platform/verisilicon/hantro_g2.c +67 -17
index aae0b562fabb..318673b66da8 100644
@@ -5,43 +5,93 @@
  * Copyright (C) 2021 Collabora Ltd, Andrzej Pietrasiewicz <[email protected]>
  */
 
+#include <linux/delay.h>
 #include "hantro_hw.h"
 #include "hantro_g2_regs.h"
 
 #define G2_ALIGN	16
 
-void hantro_g2_check_idle(struct hantro_dev *vpu)
+static bool hantro_g2_active(struct hantro_ctx *ctx)
 {
-	int i;
+	struct hantro_dev *vpu = ctx->dev;
+	u32 status;
 
-	for (i = 0; i < 3; i++) {
-		u32 status;
+	status = vdpu_read(vpu, G2_REG_INTERRUPT);
 
-		/* Make sure the VPU is idle */
-		status = vdpu_read(vpu, G2_REG_INTERRUPT);
-		if (status & G2_REG_INTERRUPT_DEC_E) {
-			dev_warn(vpu->dev, "device still running, aborting");
-			status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS;
-			vdpu_write(vpu, status, G2_REG_INTERRUPT);
-		}
+	return (status & G2_REG_INTERRUPT_DEC_E);
+}
+
+/**
+ * hantro_g2_reset:
+ * @ctx: the hantro context
+ *
+ * Emulates a reset using Hantro abort function. Failing this procedure would
+ * results in programming a running IP which leads to CPU hang.
+ *
+ * Using a hard reset procedure instead is prefferred.
+ */
+void hantro_g2_reset(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	u32 status;
+
+	status = vdpu_read(vpu, G2_REG_INTERRUPT);
+	if (status & G2_REG_INTERRUPT_DEC_E) {
+		dev_warn_ratelimited(vpu->dev, "device still running, aborting");
+		status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS;
+		vdpu_write(vpu, status, G2_REG_INTERRUPT);
+
+		do {
+			mdelay(1);
+		} while (hantro_g2_active(ctx));
 	}
 }
 
 irqreturn_t hantro_g2_irq(int irq, void *dev_id)
 {
 	struct hantro_dev *vpu = dev_id;
-	enum vb2_buffer_state state;
 	u32 status;
 
 	status = vdpu_read(vpu, G2_REG_INTERRUPT);
-	state = (status & G2_REG_INTERRUPT_DEC_RDY_INT) ?
-		 VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
 
-	vdpu_write(vpu, 0, G2_REG_INTERRUPT);
-	vdpu_write(vpu, G2_REG_CONFIG_DEC_CLK_GATE_E, G2_REG_CONFIG);
+	if (!(status & G2_REG_INTERRUPT_DEC_IRQ))
+		return IRQ_NONE;
 
-	hantro_irq_done(vpu, state);
+	hantro_reg_write(vpu, &g2_dec_irq, 0);
+	hantro_reg_write(vpu, &g2_dec_int_stat, 0);
+	hantro_reg_write(vpu, &g2_clk_gate_e, 1);
 
+	if (status & G2_REG_INTERRUPT_DEC_RDY_INT) {
+		hantro_irq_done(vpu, VB2_BUF_STATE_DONE);
+		return IRQ_HANDLED;
+	}
+
+	if (status & G2_REG_INTERRUPT_DEC_ABORT_INT) {
+		/* disabled on abort, though lets be safe and handle it */
+		dev_warn_ratelimited(vpu->dev, "decode operation aborted.");
+		return IRQ_HANDLED;
+	}
+
+	if (status & G2_REG_INTERRUPT_DEC_LAST_SLICE_INT)
+		dev_warn_ratelimited(vpu->dev, "not all macroblocks were decoded.");
+
+	if (status & G2_REG_INTERRUPT_DEC_BUS_INT)
+		dev_warn_ratelimited(vpu->dev, "bus error detected.");
+
+	if (status & G2_REG_INTERRUPT_DEC_ERROR_INT)
+		dev_warn_ratelimited(vpu->dev, "decode error detected.");
+
+	if (status & G2_REG_INTERRUPT_DEC_TIMEOUT)
+		dev_warn_ratelimited(vpu->dev, "frame decode timed out.");
+
+	/**
+	 * If the decoding haven't stopped, let it continue. The hardware timeout
+	 * will trigger if it is trully stuck.
+	 */
+	if (status & G2_REG_INTERRUPT_DEC_E)
+		return IRQ_HANDLED;
+
+	hantro_irq_done(vpu, VB2_BUF_STATE_ERROR);
 	return IRQ_HANDLED;
 }
 
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +0 -2
index 0e212198dd65..f066636e56f9 100644
@@ -582,8 +582,6 @@ int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)
 	struct hantro_dev *vpu = ctx->dev;
 	int ret;
 
-	hantro_g2_check_idle(vpu);
-
 	/* Prepare HEVC decoder context. */
 	ret = hantro_hevc_dec_prepare_run(ctx);
 	if (ret)
drivers/media/platform/verisilicon/hantro_g2_regs.h +13 -0
index b943b1816db7..c614951121c7 100644
@@ -22,7 +22,14 @@
 #define G2_REG_VERSION			G2_SWREG(0)
 
 #define G2_REG_INTERRUPT		G2_SWREG(1)
+#define G2_REG_INTERRUPT_DEC_LAST_SLICE_INT	BIT(19)
+#define G2_REG_INTERRUPT_DEC_TIMEOUT	BIT(18)
+#define G2_REG_INTERRUPT_DEC_ERROR_INT	BIT(16)
+#define G2_REG_INTERRUPT_DEC_BUF_INT	BIT(14)
+#define G2_REG_INTERRUPT_DEC_BUS_INT	BIT(13)
 #define G2_REG_INTERRUPT_DEC_RDY_INT	BIT(12)
+#define G2_REG_INTERRUPT_DEC_ABORT_INT	BIT(11)
+#define G2_REG_INTERRUPT_DEC_IRQ	BIT(8)
 #define G2_REG_INTERRUPT_DEC_ABORT_E	BIT(5)
 #define G2_REG_INTERRUPT_DEC_IRQ_DIS	BIT(4)
 #define G2_REG_INTERRUPT_DEC_E		BIT(0)
@@ -35,6 +42,9 @@
 #define BUS_WIDTH_128			2
 #define BUS_WIDTH_256			3
 
+#define g2_dec_int_stat		G2_DEC_REG(1, 11, 0xf)
+#define g2_dec_irq		G2_DEC_REG(1, 8, 0x1)
+
 #define g2_strm_swap		G2_DEC_REG(2, 28, 0xf)
 #define g2_strm_swap_old	G2_DEC_REG(2, 27, 0x1f)
 #define g2_pic_swap		G2_DEC_REG(2, 22, 0x1f)
@@ -225,6 +235,9 @@
 #define vp9_filt_level_seg5	G2_DEC_REG(19,  8, 0x3f)
 #define vp9_quant_seg5		G2_DEC_REG(19,  0, 0xff)
 
+#define g2_timemout_override_e	G2_DEC_REG(45, 31, 0x1)
+#define g2_timemout_cycles	G2_DEC_REG(45, 0, 0x7fffffff)
+
 #define hevc_cur_poc_00		G2_DEC_REG(46, 24, 0xff)
 #define hevc_cur_poc_01		G2_DEC_REG(46, 16, 0xff)
 #define hevc_cur_poc_02		G2_DEC_REG(46, 8,  0xff)
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +0 -2
index 82a478ac645e..56c79e339030 100644
@@ -893,8 +893,6 @@ int hantro_g2_vp9_dec_run(struct hantro_ctx *ctx)
 	struct vb2_v4l2_buffer *dst;
 	int ret;
 
-	hantro_g2_check_idle(ctx->dev);
-
 	ret = start_prepare_run(ctx, &decode_params);
 	if (ret) {
 		hantro_end_prepare_run(ctx);
drivers/media/platform/verisilicon/hantro_hw.h +1 -0
index c9b6556f8b2b..5f2011529f02 100644
@@ -583,6 +583,7 @@ void hantro_g2_vp9_dec_done(struct hantro_ctx *ctx);
 int hantro_vp9_dec_init(struct hantro_ctx *ctx);
 void hantro_vp9_dec_exit(struct hantro_ctx *ctx);
 void hantro_g2_check_idle(struct hantro_dev *vpu);
+void hantro_g2_reset(struct hantro_ctx *ctx);
 irqreturn_t hantro_g2_irq(int irq, void *dev_id);
 
 #endif /* HANTRO_HW_H_ */
drivers/media/platform/verisilicon/imx8m_vpu_hw.c +2 -0
index f9f276385c11..5be0e2e76882 100644
@@ -294,11 +294,13 @@ static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
 static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
 	[HANTRO_MODE_HEVC_DEC] = {
 		.run = hantro_g2_hevc_dec_run,
+		.reset = hantro_g2_reset,
 		.init = hantro_hevc_dec_init,
 		.exit = hantro_hevc_dec_exit,
 	},
 	[HANTRO_MODE_VP9_DEC] = {
 		.run = hantro_g2_vp9_dec_run,
+		.reset = hantro_g2_reset,
 		.done = hantro_g2_vp9_dec_done,
 		.init = hantro_vp9_dec_init,
 		.exit = hantro_vp9_dec_exit,
maintainer
#1 lore raw

PATCH 1/3 media: verisilicon: Store chroma and motion vectors offset

From: Benjamin Gaignard <[email protected]>

[ Upstream commit 545bf944f978b7468d3a6bd668d9ff6953bc542e ]

Store computed values of chroma and motion vectors offset because they depends on width and height values which change if the resolution change.

Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")

---
 drivers/media/platform/verisilicon/hantro.h            | 2 ++
 drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c | 6 ++++--
 2 files changed, 6 insertions(+), 2 deletions(-)
drivers/media/platform/verisilicon/hantro.h +2 -0
index 77aee9489516..e9e15746f0aa 100644
@@ -328,6 +328,8 @@ struct hantro_vp9_decoded_buffer_info {
 	/* Info needed when the decoded frame serves as a reference frame. */
 	unsigned short width;
 	unsigned short height;
+	size_t chroma_offset;
+	size_t mv_offset;
 	u32 bit_depth : 4;
 };
 
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +4 -2
index 6fc4b555517f..6db1c32fce4d 100644
@@ -158,9 +158,11 @@ static void config_output(struct hantro_ctx *ctx,
 
 	chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
 	hantro_write_addr(ctx->dev, G2_OUT_CHROMA_ADDR, chroma_addr);
+	dst->vp9.chroma_offset = chroma_offset(ctx, dec_params);
 
 	mv_addr = luma_addr + mv_offset(ctx, dec_params);
 	hantro_write_addr(ctx->dev, G2_OUT_MV_ADDR, mv_addr);
+	dst->vp9.mv_offset = mv_offset(ctx, dec_params);
 }
 
 struct hantro_vp9_ref_reg {
@@ -195,7 +197,7 @@ static void config_ref(struct hantro_ctx *ctx,
 	luma_addr = hantro_get_dec_buf_addr(ctx, &buf->base.vb.vb2_buf);
 	hantro_write_addr(ctx->dev, ref_reg->y_base, luma_addr);
 
-	chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
+	chroma_addr = luma_addr + buf->vp9.chroma_offset;
 	hantro_write_addr(ctx->dev, ref_reg->c_base, chroma_addr);
 }
 
@@ -238,7 +240,7 @@ static void config_ref_registers(struct hantro_ctx *ctx,
 	config_ref(ctx, dst, &ref_regs[2], dec_params, dec_params->alt_frame_ts);
 
 	mv_addr = hantro_get_dec_buf_addr(ctx, &mv_ref->base.vb.vb2_buf) +
-		  mv_offset(ctx, dec_params);
+		  mv_ref->vp9.mv_offset;
 	hantro_write_addr(ctx->dev, G2_REF_MV_ADDR(0), mv_addr);
 
 	hantro_reg_write(ctx->dev, &vp9_last_sign_bias,
Signature · 1 line
2.51.0
maintainer
#2 lore raw

PATCH 2/3 media: verisilicon: g2: Use common helpers to compute chroma and mv offsets

From: Benjamin Gaignard <[email protected]>

[ Upstream commit 3eeaee737dcee3c32e256870dbc2687a2a6fe970 ]

HEVC and VP9 are running on the same hardware and share the same chroma and motion vectors offset constraint.
Create common helpers functions for these computation. Source and destination buffer height may not be the same because alignment constraint are different so use destination height to compute chroma offset because we target this buffer as hardware output.
To be able to use the helpers in both VP9 HEVC code remove dec_params and use context->bit_depth instead.

Stable-dep-of: 19c286b75507 ("media: verisilicon: Fix CPU stalls on G2 bus error")

---
 .../media/platform/verisilicon/hantro_g2.c    | 14 ++++++++++
 .../platform/verisilicon/hantro_g2_hevc_dec.c | 18 ++-----------
 .../platform/verisilicon/hantro_g2_vp9_dec.c  | 26 +++----------------
 .../media/platform/verisilicon/hantro_hw.h    |  3 +++
 4 files changed, 23 insertions(+), 38 deletions(-)
drivers/media/platform/verisilicon/hantro_g2.c +14 -0
index ee5f14c5f8f2..b880a6849d58 100644
@@ -8,6 +8,8 @@
 #include "hantro_hw.h"
 #include "hantro_g2_regs.h"
 
+#define G2_ALIGN	16
+
 void hantro_g2_check_idle(struct hantro_dev *vpu)
 {
 	int i;
@@ -42,3 +44,15 @@ irqreturn_t hantro_g2_irq(int irq, void *dev_id)
 
 	return IRQ_HANDLED;
 }
+
+size_t hantro_g2_chroma_offset(struct hantro_ctx *ctx)
+{
+	return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth / 8;
+}
+
+size_t hantro_g2_motion_vectors_offset(struct hantro_ctx *ctx)
+{
+	size_t cr_offset = hantro_g2_chroma_offset(ctx);
+
+	return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
+}
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +2 -16
index d1971af5f7fa..78eb52edd5c3 100644
@@ -8,20 +8,6 @@
 #include "hantro_hw.h"
 #include "hantro_g2_regs.h"
 
-#define G2_ALIGN	16
-
-static size_t hantro_hevc_chroma_offset(struct hantro_ctx *ctx)
-{
-	return ctx->dst_fmt.width * ctx->dst_fmt.height * ctx->bit_depth / 8;
-}
-
-static size_t hantro_hevc_motion_vectors_offset(struct hantro_ctx *ctx)
-{
-	size_t cr_offset = hantro_hevc_chroma_offset(ctx);
-
-	return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
-}
-
 static void prepare_tile_info_buffer(struct hantro_ctx *ctx)
 {
 	struct hantro_dev *vpu = ctx->dev;
@@ -384,8 +370,8 @@ static int set_ref(struct hantro_ctx *ctx)
 	struct hantro_dev *vpu = ctx->dev;
 	struct vb2_v4l2_buffer *vb2_dst;
 	struct hantro_decoded_buffer *dst;
-	size_t cr_offset = hantro_hevc_chroma_offset(ctx);
-	size_t mv_offset = hantro_hevc_motion_vectors_offset(ctx);
+	size_t cr_offset = hantro_g2_chroma_offset(ctx);
+	size_t mv_offset = hantro_g2_motion_vectors_offset(ctx);
 	u32 max_ref_frames;
 	u16 dpb_longterm_e;
 	static const struct hantro_reg cur_poc[] = {
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +4 -22
index 6db1c32fce4d..342e543dee4c 100644
@@ -16,8 +16,6 @@
 #include "hantro_vp9.h"
 #include "hantro_g2_regs.h"
 
-#define G2_ALIGN 16
-
 enum hantro_ref_frames {
 	INTRA_FRAME = 0,
 	LAST_FRAME = 1,
@@ -90,22 +88,6 @@ static int start_prepare_run(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_
 	return 0;
 }
 
-static size_t chroma_offset(const struct hantro_ctx *ctx,
-			    const struct v4l2_ctrl_vp9_frame *dec_params)
-{
-	int bytes_per_pixel = dec_params->bit_depth == 8 ? 1 : 2;
-
-	return ctx->src_fmt.width * ctx->src_fmt.height * bytes_per_pixel;
-}
-
-static size_t mv_offset(const struct hantro_ctx *ctx,
-			const struct v4l2_ctrl_vp9_frame *dec_params)
-{
-	size_t cr_offset = chroma_offset(ctx, dec_params);
-
-	return ALIGN((cr_offset * 3) / 2, G2_ALIGN);
-}
-
 static struct hantro_decoded_buffer *
 get_ref_buf(struct hantro_ctx *ctx, struct vb2_v4l2_buffer *dst, u64 timestamp)
 {
@@ -156,13 +138,13 @@ static void config_output(struct hantro_ctx *ctx,
 	luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
 	hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
 
-	chroma_addr = luma_addr + chroma_offset(ctx, dec_params);
+	chroma_addr = luma_addr + hantro_g2_chroma_offset(ctx);
 	hantro_write_addr(ctx->dev, G2_OUT_CHROMA_ADDR, chroma_addr);
-	dst->vp9.chroma_offset = chroma_offset(ctx, dec_params);
+	dst->vp9.chroma_offset = hantro_g2_chroma_offset(ctx);
 
-	mv_addr = luma_addr + mv_offset(ctx, dec_params);
+	mv_addr = luma_addr + hantro_g2_motion_vectors_offset(ctx);
 	hantro_write_addr(ctx->dev, G2_OUT_MV_ADDR, mv_addr);
-	dst->vp9.mv_offset = mv_offset(ctx, dec_params);
+	dst->vp9.mv_offset = hantro_g2_motion_vectors_offset(ctx);
 }
 
 struct hantro_vp9_ref_reg {
drivers/media/platform/verisilicon/hantro_hw.h +3 -0
index 7f33f7b07ce4..c7a2a20c70b7 100644
@@ -519,6 +519,9 @@ hantro_av1_mv_size(unsigned int width, unsigned int height)
 	return ALIGN(num_sbs * 384, 16) * 2 + 512;
 }
 
+size_t hantro_g2_chroma_offset(struct hantro_ctx *ctx);
+size_t hantro_g2_motion_vectors_offset(struct hantro_ctx *ctx);
+
 int hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx);
 int rockchip_vpu2_mpeg2_dec_run(struct hantro_ctx *ctx);
 void hantro_mpeg2_dec_copy_qtable(u8 *qtable,
Signature · 1 line
2.51.0
maintainer
#3 lore raw

PATCH 3/3 media: verisilicon: Fix CPU stalls on G2 bus error

In reply to Sasha Levin

From: Nicolas Dufresne <[email protected]>

[ Upstream commit 19c286b755072a22a063052f530a6b1fac8a1f63 ]

In some seek stress tests, we are getting IRQ from the G2 decoder where the dec_bus_int and the dec_e bits are high, meaning the decoder is still running despite the error.

Fix this by reworking the IRQ handler to only finish the job once we have reached completion and move the software reset to when our software watchdog triggers.

This way, we let the hardware continue on errors when it did not self reset and in worse case scenario the hardware timeout will automatically stop it. The actual error will be fixed in a follow up patch.

Fixes 3385c514ecc5a ("media: hantro: Convert imx8m_vpu_g2_irq to helper")
---
 .../media/platform/verisilicon/hantro_g2.c    | 88 +++++++++++++++----
 .../platform/verisilicon/hantro_g2_hevc_dec.c |  2 -
 .../platform/verisilicon/hantro_g2_regs.h     | 13 +++
 .../platform/verisilicon/hantro_g2_vp9_dec.c  |  2 -
 .../media/platform/verisilicon/hantro_hw.h    |  1 +
 .../media/platform/verisilicon/imx8m_vpu_hw.c |  2 +
 6 files changed, 85 insertions(+), 23 deletions(-)
drivers/media/platform/verisilicon/hantro_g2.c +69 -19
index b880a6849d58..85fa2704a732 100644
@@ -5,43 +5,93 @@
  * Copyright (C) 2021 Collabora Ltd, Andrzej Pietrasiewicz <[email protected]>
  */
 
+#include <linux/delay.h>
 #include "hantro_hw.h"
 #include "hantro_g2_regs.h"
 
 #define G2_ALIGN	16
 
-void hantro_g2_check_idle(struct hantro_dev *vpu)
+static bool hantro_g2_active(struct hantro_ctx *ctx)
 {
-	int i;
-
-	for (i = 0; i < 3; i++) {
-		u32 status;
-
-		/* Make sure the VPU is idle */
-		status = vdpu_read(vpu, G2_REG_INTERRUPT);
-		if (status & G2_REG_INTERRUPT_DEC_E) {
-			dev_warn(vpu->dev, "device still running, aborting");
-			status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS;
-			vdpu_write(vpu, status, G2_REG_INTERRUPT);
-		}
+	struct hantro_dev *vpu = ctx->dev;
+	u32 status;
+
+	status = vdpu_read(vpu, G2_REG_INTERRUPT);
+
+	return (status & G2_REG_INTERRUPT_DEC_E);
+}
+
+/**
+ * hantro_g2_reset:
+ * @ctx: the hantro context
+ *
+ * Emulates a reset using Hantro abort function. Failing this procedure would
+ * results in programming a running IP which leads to CPU hang.
+ *
+ * Using a hard reset procedure instead is prefferred.
+ */
+void hantro_g2_reset(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	u32 status;
+
+	status = vdpu_read(vpu, G2_REG_INTERRUPT);
+	if (status & G2_REG_INTERRUPT_DEC_E) {
+		dev_warn_ratelimited(vpu->dev, "device still running, aborting");
+		status |= G2_REG_INTERRUPT_DEC_ABORT_E | G2_REG_INTERRUPT_DEC_IRQ_DIS;
+		vdpu_write(vpu, status, G2_REG_INTERRUPT);
+
+		do {
+			mdelay(1);
+		} while (hantro_g2_active(ctx));
 	}
 }
 
 irqreturn_t hantro_g2_irq(int irq, void *dev_id)
 {
 	struct hantro_dev *vpu = dev_id;
-	enum vb2_buffer_state state;
 	u32 status;
 
 	status = vdpu_read(vpu, G2_REG_INTERRUPT);
-	state = (status & G2_REG_INTERRUPT_DEC_RDY_INT) ?
-		 VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
 
-	vdpu_write(vpu, 0, G2_REG_INTERRUPT);
-	vdpu_write(vpu, G2_REG_CONFIG_DEC_CLK_GATE_E, G2_REG_CONFIG);
+	if (!(status & G2_REG_INTERRUPT_DEC_IRQ))
+		return IRQ_NONE;
+
+	hantro_reg_write(vpu, &g2_dec_irq, 0);
+	hantro_reg_write(vpu, &g2_dec_int_stat, 0);
+	hantro_reg_write(vpu, &g2_clk_gate_e, 1);
+
+	if (status & G2_REG_INTERRUPT_DEC_RDY_INT) {
+		hantro_irq_done(vpu, VB2_BUF_STATE_DONE);
+		return IRQ_HANDLED;
+	}
+
+	if (status & G2_REG_INTERRUPT_DEC_ABORT_INT) {
+		/* disabled on abort, though lets be safe and handle it */
+		dev_warn_ratelimited(vpu->dev, "decode operation aborted.");
+		return IRQ_HANDLED;
+	}
+
+	if (status & G2_REG_INTERRUPT_DEC_LAST_SLICE_INT)
+		dev_warn_ratelimited(vpu->dev, "not all macroblocks were decoded.");
+
+	if (status & G2_REG_INTERRUPT_DEC_BUS_INT)
+		dev_warn_ratelimited(vpu->dev, "bus error detected.");
+
+	if (status & G2_REG_INTERRUPT_DEC_ERROR_INT)
+		dev_warn_ratelimited(vpu->dev, "decode error detected.");
+
+	if (status & G2_REG_INTERRUPT_DEC_TIMEOUT)
+		dev_warn_ratelimited(vpu->dev, "frame decode timed out.");
 
-	hantro_irq_done(vpu, state);
+	/**
+	 * If the decoding haven't stopped, let it continue. The hardware timeout
+	 * will trigger if it is trully stuck.
+	 */
+	if (status & G2_REG_INTERRUPT_DEC_E)
+		return IRQ_HANDLED;
 
+	hantro_irq_done(vpu, VB2_BUF_STATE_ERROR);
 	return IRQ_HANDLED;
 }
 
drivers/media/platform/verisilicon/hantro_g2_hevc_dec.c +0 -2
index 78eb52edd5c3..8620e1f07d99 100644
@@ -567,8 +567,6 @@ int hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)
 	struct hantro_dev *vpu = ctx->dev;
 	int ret;
 
-	hantro_g2_check_idle(vpu);
-
 	/* Prepare HEVC decoder context. */
 	ret = hantro_hevc_dec_prepare_run(ctx);
 	if (ret)
drivers/media/platform/verisilicon/hantro_g2_regs.h +13 -0
index 82606783591a..e238b1a308bb 100644
@@ -22,7 +22,14 @@
 #define G2_REG_VERSION			G2_SWREG(0)
 
 #define G2_REG_INTERRUPT		G2_SWREG(1)
+#define G2_REG_INTERRUPT_DEC_LAST_SLICE_INT	BIT(19)
+#define G2_REG_INTERRUPT_DEC_TIMEOUT	BIT(18)
+#define G2_REG_INTERRUPT_DEC_ERROR_INT	BIT(16)
+#define G2_REG_INTERRUPT_DEC_BUF_INT	BIT(14)
+#define G2_REG_INTERRUPT_DEC_BUS_INT	BIT(13)
 #define G2_REG_INTERRUPT_DEC_RDY_INT	BIT(12)
+#define G2_REG_INTERRUPT_DEC_ABORT_INT	BIT(11)
+#define G2_REG_INTERRUPT_DEC_IRQ	BIT(8)
 #define G2_REG_INTERRUPT_DEC_ABORT_E	BIT(5)
 #define G2_REG_INTERRUPT_DEC_IRQ_DIS	BIT(4)
 #define G2_REG_INTERRUPT_DEC_E		BIT(0)
@@ -35,6 +42,9 @@
 #define BUS_WIDTH_128			2
 #define BUS_WIDTH_256			3
 
+#define g2_dec_int_stat		G2_DEC_REG(1, 11, 0xf)
+#define g2_dec_irq		G2_DEC_REG(1, 8, 0x1)
+
 #define g2_strm_swap		G2_DEC_REG(2, 28, 0xf)
 #define g2_strm_swap_old	G2_DEC_REG(2, 27, 0x1f)
 #define g2_pic_swap		G2_DEC_REG(2, 22, 0x1f)
@@ -225,6 +235,9 @@
 #define vp9_filt_level_seg5	G2_DEC_REG(19,  8, 0x3f)
 #define vp9_quant_seg5		G2_DEC_REG(19,  0, 0xff)
 
+#define g2_timemout_override_e	G2_DEC_REG(45, 31, 0x1)
+#define g2_timemout_cycles	G2_DEC_REG(45, 0, 0x7fffffff)
+
 #define hevc_cur_poc_00		G2_DEC_REG(46, 24, 0xff)
 #define hevc_cur_poc_01		G2_DEC_REG(46, 16, 0xff)
 #define hevc_cur_poc_02		G2_DEC_REG(46, 8,  0xff)
drivers/media/platform/verisilicon/hantro_g2_vp9_dec.c +0 -2
index 342e543dee4c..70e7cedc33b8 100644
@@ -893,8 +893,6 @@ int hantro_g2_vp9_dec_run(struct hantro_ctx *ctx)
 	struct vb2_v4l2_buffer *dst;
 	int ret;
 
-	hantro_g2_check_idle(ctx->dev);
-
 	ret = start_prepare_run(ctx, &decode_params);
 	if (ret) {
 		hantro_end_prepare_run(ctx);
drivers/media/platform/verisilicon/hantro_hw.h +1 -0
index c7a2a20c70b7..d71d00ef6d32 100644
@@ -541,6 +541,7 @@ void hantro_g2_vp9_dec_done(struct hantro_ctx *ctx);
 int hantro_vp9_dec_init(struct hantro_ctx *ctx);
 void hantro_vp9_dec_exit(struct hantro_ctx *ctx);
 void hantro_g2_check_idle(struct hantro_dev *vpu);
+void hantro_g2_reset(struct hantro_ctx *ctx);
 irqreturn_t hantro_g2_irq(int irq, void *dev_id);
 
 #endif /* HANTRO_HW_H_ */
drivers/media/platform/verisilicon/imx8m_vpu_hw.c +2 -0
index f850d8bddef6..74fd985a8aad 100644
@@ -312,11 +312,13 @@ static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
 static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
 	[HANTRO_MODE_HEVC_DEC] = {
 		.run = hantro_g2_hevc_dec_run,
+		.reset = hantro_g2_reset,
 		.init = hantro_hevc_dec_init,
 		.exit = hantro_hevc_dec_exit,
 	},
 	[HANTRO_MODE_VP9_DEC] = {
 		.run = hantro_g2_vp9_dec_run,
+		.reset = hantro_g2_reset,
 		.done = hantro_g2_vp9_dec_done,
 		.init = hantro_vp9_dec_init,
 		.exit = hantro_vp9_dec_exit,
Signature · 1 line
2.51.0