Add support for ECS LIVA QC710 mini PC/devkit
Subsystems (7)
v2 cover Add support for ECS LIVA QC710 mini PC/devkit
v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags
Display output glitching and IOMMU faulting turned out to be a missing reset, fix in:
https://lore.kernel.org/all/20260120-topic-7180_dispcc_bcr-v1-0-0b1b442156c3@oss.qualcomm.com/
Also verified the usb_1_hsphy by reading registers in Windows with windbg. Unsurprisingly they do match (it is the same system-in-package as aspire1..)
v1: https://lore.kernel.org/all/[email protected]/
Val Packett (7):
dt-bindings: vendor-prefixes: Add ECS (Elitegroup Computer Systems)
dt-bindings: vendor-prefixes: Add AlgolTek
dt-bindings: arm: qcom: Add ECS LIVA QC710
dt-bindings: display: bridge: simple: document the Algoltek AG6311
DP-to-HDMI bridge
drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge
arm64: dts: qcom: Add support for ECS LIVA QC710
firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710
.../devicetree/bindings/arm/qcom.yaml | 1 + .../display/bridge/simple-bridge.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 4 + arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/sc7180-ecs-liva-qc710.dts | 617 ++++++++++++++++++ drivers/firmware/qcom/qcom_scm.c | 1 + drivers/gpu/drm/bridge/simple-bridge.c | 5 + 7 files changed, 631 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts
Signature · 1 line
2.51.2
PATCH v2 1/7 dt-bindings: vendor-prefixes: Add ECS (Elitegroup Computer Systems)
ECS is a Taiwanese manufacturer of mainboards and mini-PCs.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -469,6 +469,8 @@ patternProperties: description: Eckelmann AG "^econet,.*": description: EcoNet (HK) Limited + "^ecs,.*": + description: Elitegroup Computer Systems Co., Ltd. "^edgeble,.*": description: Edgeble AI Technologies Pvt. Ltd. "^edimax,.*":
Signature · 1 line
2.51.2
Re: [PATCH v2 1/7] dt-bindings: vendor-prefixes: Add ECS (Elitegroup Computer Systems)
Quoted 6 lines · Val Packett
ECS is a Taiwanese manufacturer of mainboards and mini-PCs.
Signed-off-by Val Packett <[email protected]>--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Best regards,
Krzysztof
PATCH v2 2/7 dt-bindings: vendor-prefixes: Add AlgolTek
In reply to Val PackettAlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -86,6 +86,8 @@ patternProperties: description: Aldec, Inc. "^alfa-network,.*": description: ALFA Network Inc. + "^algoltek,.*": + description: AlgolTek, Inc. "^allegro,.*": description: Allegro DVT "^allegromicro,.*":
Signature · 1 line
2.51.2
Re: [PATCH v2 2/7] dt-bindings: vendor-prefixes: Add AlgolTek
Quoted 13 lines · Val Packett
AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.
Signed-off-by Val Packett <[email protected]>--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)Documentation/devicetree/bindings/vendor-prefixes.yaml +0
-0
Documentation/devicetree/bindings/vendor-prefixes.yaml patternProperties: · line 93
Quoted 8 lines
Documentation/devicetree/bindings/vendor-prefixes.yaml +2
-0@@ -86,6 +86,8 @@ patternProperties: description: Aldec, Inc. "^alfa-network,.*": description: ALFA Network Inc. + "^algoltek,.*": + description: AlgolTek, Inc. "^allegro,.*": description: Allegro DVT "^allegromicro,.*":
Thanks,
Neil
Re: [PATCH v2 2/7] dt-bindings: vendor-prefixes: Add AlgolTek
In reply to Val PackettQuoted 7 lines · Val Packett
AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.
Signed-off-by Val Packett <[email protected]>--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
I initially silently ignored this patch because this is churn to deal with such one liners. This should be squashed. But after talk with Dmitry let's clarify.
If you target different trees, then:
1. Do not combine them into one patchset
2. If combining, do not mix the order like 1/7 goes to foo, 2/7 goes to bar, 3/7 goes to foo again, 4/7 goes to bar again.
Make it easy for maintainers, so we won't spend time deciphering this or acking multiple of such single liners (I asked this on mailing list multiple times).
Best regards,
Krzysztof
PATCH v2 3/7 dt-bindings: arm: qcom: Add ECS LIVA QC710
In reply to Val PackettDocument the SC7180 (Snapdragon 7c) based ECS LIVA QC710 mini PC/devkit.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/qcom.yaml +1 -0
@@ -385,6 +385,7 @@ properties: - items: - enum: - acer,aspire1 + - ecs,liva-qc710 - qcom,sc7180-idp - const: qcom,sc7180
Signature · 1 line
2.51.2
Re: [PATCH v2 3/7] dt-bindings: arm: qcom: Add ECS LIVA QC710
Quoted 6 lines · Val Packett
Document the SC7180 (Snapdragon 7c) based ECS LIVA QC710 mini PC/devkit.
Signed-off-by Val Packett <[email protected]>--- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+)
Best regards,
Krzysztof
PATCH v2 4/7 dt-bindings: display: bridge: simple: document the Algoltek AG6311 DP-to-HDMI bridge
In reply to Val PackettThe Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.
--- .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +1 -0
@@ -27,6 +27,7 @@ properties: - const: adi,adv7123 - enum: - adi,adv7123 + - algoltek,ag6311 - asl-tek,cs5263 - dumb-vga-dac - parade,ps185hdm
Signature · 1 line
2.51.2
PATCH v2 5/7 drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge
In reply to Val PackettThe Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.
--- drivers/gpu/drm/bridge/simple-bridge.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/gpu/drm/bridge/simple-bridge.c +5 -0
@@ -260,6 +260,11 @@ static const struct of_device_id simple_bridge_match[] = { .timings = &default_bridge_timings, .connector_type = DRM_MODE_CONNECTOR_VGA, }, + }, { + .compatible = "algoltek,ag6311", + .data = &(const struct simple_bridge_info) { + .connector_type = DRM_MODE_CONNECTOR_HDMIA, + }, }, { .compatible = "asl-tek,cs5263", .data = &(const struct simple_bridge_info) {
Signature · 1 line
2.51.2
PATCH v2 6/7 arm64: dts: qcom: Add support for ECS LIVA QC710
In reply to Val PackettAdd a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.
Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)
Not included:
- HDMI Audio
- EC (IT8987)
--- arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/sc7180-ecs-liva-qc710.dts | 617 ++++++++++++++++++ 2 files changed, 619 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts
arch/arm64/boot/dts/qcom/Makefile +2 -0
@@ -168,6 +168,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride-r3.dtb sc7180-acer-aspire1-el2-dtbs := sc7180-acer-aspire1.dtb sc7180-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb +sc7180-ecs-liva-qc710-el2-dtbs := sc7180-ecs-liva-qc710.dtb sc7180-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += sc7180-ecs-liva-qc710.dtb sc7180-ecs-liva-qc710-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +617 -0
617 lines not on this page · raw message
Signature · 1 line
2.51.2
Re: [PATCH v2 6/7] arm64: dts: qcom: Add support for ECS LIVA QC710
Quoted 17 lines · Val Packett
Add a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.
Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)Not included:
- HDMI Audio
- EC (IT8987)Signed-off-by Val Packett <[email protected]>---
[...]
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 467
Quoted 7 lines
+&tlmm {
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6
-0+ /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>;
Would it still work with <59 4>? 58 seems to not be related to a QUP, rather as an audio MCLK output (would that be why +Nikita couldn't get some sort of audio working on his aspire1? That DT has it reserved too)
[...]
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 549
Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +4
-0+ data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up;
here you do:
drive-strength
bias-
[...]
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 569
Quoted 6 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6
-0+ sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + };
here you do the inverse
(the former is preferred/more common)
otherwise
Konrad
Re: [PATCH v2 6/7] arm64: dts: qcom: Add support for ECS LIVA QC710
Konrad Dybcio писал(а) 21.01.2026 16:20:
Quoted 20 lines · Val Packett
Quoted 17 lines
Add a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.
Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)Not included:
- HDMI Audio
- EC (IT8987)Signed-off-by Val Packett <[email protected]>---
[...]
Quoted 12 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 467
Quoted 7 lines
+&tlmm {
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6
-0+ /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>;Would it still work with <59 4>? 58 seems to not be related to a QUP, rather as an audio MCLK output (would that be why +Nikita couldn't get some sort of audio working on his aspire1? That DT has it reserved too)
FWIW according to aspire1 schematic GPIO 57 is codec mclk (which is implemented and works perfectly, only DMIC connected to the soc instead of said codec is broken); GPIO 58~62 are NC with a note "Finger Printer" [sic] near them. There is no bracket annotation to associate the note to specific pin range, but it's smack in the middle of 58~62 range and from the fact that 63 (speaker amp bclk) and pretty much every other pin later is also used, I guessed all 5 are actually reserved. It's possible that one of them is not actually reserved by the firmware but probably not the source of aspire1 issues (the dmic is connected to lpass tlmm anyway) or perhaps they reserved 58 to be an interrupt input for the fp, or something like that...
Nikita
Quoted 30 lines
[...]
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 549
Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +4
-0+ data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up;here you do:
drive-strength
bias-[...]
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 569
Quoted 6 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6
-0+ sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + };here you do the inverse
(the former is preferred/more common)
otherwise
Reviewed-by Konrad Dybcio <[email protected]>Konrad
PATCH v2 7/7 firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710
In reply to Val PackettAllow this machine to access efivars through qseecom/uefisecapp.
--- drivers/firmware/qcom/qcom_scm.c | 1 + 1 file changed, 1 insertion(+)
drivers/firmware/qcom/qcom_scm.c +1 -0
@@ -2295,6 +2295,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = { { .compatible = "dell,inspiron-14-plus-7441" }, { .compatible = "dell,latitude-7455" }, { .compatible = "dell,xps13-9345" }, + { .compatible = "ecs,liva-qc710" }, { .compatible = "hp,elitebook-ultra-g1q" }, { .compatible = "hp,omnibook-x14" }, { .compatible = "huawei,gaokun3" },
Signature · 1 line
2.51.2
Dmitry Baryshkov
AppliedRe: (subset) [PATCH v2 0/7] Add support for ECS LIVA QC710 mini PC/devkit
In reply to Val PackettQuoted 11 lines · Val Packett
v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags[...]
Applied to drm-misc-next, thanks!
[2/7] dt-bindings: vendor-prefixes: Add AlgolTek
commit: 00e6f8f60601b412e400873c8972f3e3802557f3
[4/7] dt-bindings: display: bridge: simple: document the Algoltek AG6311 DP-to-HDMI bridge
commit: e58be49a9a09112fdb4e4d68b4653a2545746091
[5/7] drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge
commit: d51e390ae84857a999ad2046e074e97663e98e36Best regards,
Signature · 2 lines
With best wishes Dmitry
Re: (subset) [PATCH v2 0/7] Add support for ECS LIVA QC710 mini PC/devkit
In reply to Val PackettQuoted 11 lines · Val Packett
v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags[...]
Applied, thanks!
[7/7] firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710
commit: 34a49e8508b5d00816d25fe3758b474471e7e051
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>