Skip to contentSkip to conversation

Add support for ECS LIVA QC710 mini PC/devkit

PATCH Applied Val Packett 7 participants 16 messages Jan 20 – Mar 10

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v2 cover Add support for ECS LIVA QC710 mini PC/devkit

v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags

Display output glitching and IOMMU faulting turned out to be a missing reset, fix in:
https://lore.kernel.org/all/20260120-topic-7180_dispcc_bcr-v1-0-0b1b442156c3@oss.qualcomm.com/

Also verified the usb_1_hsphy by reading registers in Windows with windbg. Unsurprisingly they do match (it is the same system-in-package as aspire1..)

v1: https://lore.kernel.org/all/[email protected]/

Val Packett (7):
dt-bindings: vendor-prefixes: Add ECS (Elitegroup Computer Systems)
dt-bindings: vendor-prefixes: Add AlgolTek
dt-bindings: arm: qcom: Add ECS LIVA QC710
dt-bindings: display: bridge: simple: document the Algoltek AG6311
DP-to-HDMI bridge
drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge
arm64: dts: qcom: Add support for ECS LIVA QC710
firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 .../display/bridge/simple-bridge.yaml         |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../boot/dts/qcom/sc7180-ecs-liva-qc710.dts   | 617 ++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c              |   1 +
 drivers/gpu/drm/bridge/simple-bridge.c        |   5 +
 7 files changed, 631 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts
Signature · 1 line
2.51.2
#1 lore raw

PATCH v2 1/7 dt-bindings: vendor-prefixes: Add ECS (Elitegroup Computer Systems)

ECS is a Taiwanese manufacturer of mainboards and mini-PCs.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index eee160de6dc5..63730f75a578 100644
@@ -469,6 +469,8 @@ patternProperties:
     description: Eckelmann AG
   "^econet,.*":
     description: EcoNet (HK) Limited
+  "^ecs,.*":
+    description: Elitegroup Computer Systems Co., Ltd.
   "^edgeble,.*":
     description: Edgeble AI Technologies Pvt. Ltd.
   "^edimax,.*":
Signature · 1 line
2.51.2
#3 lore raw

PATCH v2 2/7 dt-bindings: vendor-prefixes: Add AlgolTek

In reply to Val Packett

AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 63730f75a578..f2bd32fbb717 100644
@@ -86,6 +86,8 @@ patternProperties:
     description: Aldec, Inc.
   "^alfa-network,.*":
     description: ALFA Network Inc.
+  "^algoltek,.*":
+    description: AlgolTek, Inc.
   "^allegro,.*":
     description: Allegro DVT
   "^allegromicro,.*":
Signature · 1 line
2.51.2
maintainer Reviewed-by on v2 2/7
#4 lore raw

Re: [PATCH v2 2/7] dt-bindings: vendor-prefixes: Add AlgolTek

Quoted 13 lines · Val Packett

AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.

---
  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
  1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +0 -0
index 63730f75a578..f2bd32fbb717 100644

Documentation/devicetree/bindings/vendor-prefixes.yaml patternProperties: · line 93

Quoted 8 lines
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -86,6 +86,8 @@ patternProperties:
      description: Aldec, Inc.
    "^alfa-network,.*":
      description: ALFA Network Inc.
+  "^algoltek,.*":
+    description: AlgolTek, Inc.
    "^allegro,.*":
      description: Allegro DVT
    "^allegromicro,.*":

Thanks,
Neil

#5 lore raw

Re: [PATCH v2 2/7] dt-bindings: vendor-prefixes: Add AlgolTek

In reply to Val Packett
Quoted 7 lines · Val Packett

AlgolTek is a Taiwanese chip manufacturer specialized in high-speed signal and power transmission and conversion.

---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

I initially silently ignored this patch because this is churn to deal with such one liners. This should be squashed. But after talk with Dmitry let's clarify.

If you target different trees, then:
1. Do not combine them into one patchset
2. If combining, do not mix the order like 1/7 goes to foo, 2/7 goes to bar, 3/7 goes to foo again, 4/7 goes to bar again.

Make it easy for maintainers, so we won't spend time deciphering this or acking multiple of such single liners (I asked this on mailing list multiple times).

Best regards,
Krzysztof

#6 lore raw

PATCH v2 3/7 dt-bindings: arm: qcom: Add ECS LIVA QC710

In reply to Val Packett

Document the SC7180 (Snapdragon 7c) based ECS LIVA QC710 mini PC/devkit.

---
 Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/qcom.yaml +1 -0
index d48c625d3fc4..54750b11895f 100644
@@ -385,6 +385,7 @@ properties:
       - items:
           - enum:
               - acer,aspire1
+              - ecs,liva-qc710
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
Signature · 1 line
2.51.2
#8 lore raw

PATCH v2 4/7 dt-bindings: display: bridge: simple: document the Algoltek AG6311 DP-to-HDMI bridge

In reply to Val Packett

The Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.

---
 .../devicetree/bindings/display/bridge/simple-bridge.yaml        | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +1 -0
index 20c7e0a77802..e6808419f625 100644
@@ -27,6 +27,7 @@ properties:
           - const: adi,adv7123
       - enum:
           - adi,adv7123
+          - algoltek,ag6311
           - asl-tek,cs5263
           - dumb-vga-dac
           - parade,ps185hdm
Signature · 1 line
2.51.2
#9 lore raw

PATCH v2 5/7 drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge

In reply to Val Packett

The Algoltek AG6311 is a transparent DisplayPort to HDMI bridge.

---
 drivers/gpu/drm/bridge/simple-bridge.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/bridge/simple-bridge.c +5 -0
index 873b32cfb508..8aa31ca3c72d 100644
@@ -260,6 +260,11 @@ static const struct of_device_id simple_bridge_match[] = {
 			.timings = &default_bridge_timings,
 			.connector_type = DRM_MODE_CONNECTOR_VGA,
 		},
+	}, {
+		.compatible = "algoltek,ag6311",
+		.data = &(const struct simple_bridge_info) {
+			.connector_type = DRM_MODE_CONNECTOR_HDMIA,
+		},
 	}, {
 		.compatible = "asl-tek,cs5263",
 		.data = &(const struct simple_bridge_info) {
Signature · 1 line
2.51.2
#10 lore raw

PATCH v2 6/7 arm64: dts: qcom: Add support for ECS LIVA QC710

In reply to Val Packett

Add a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.

Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)

Not included:
- HDMI Audio
- EC (IT8987)

---
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 .../boot/dts/qcom/sc7180-ecs-liva-qc710.dts   | 617 ++++++++++++++++++
 2 files changed, 619 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts
arch/arm64/boot/dts/qcom/Makefile +2 -0
index a5d6f451f85c..09da15f97e23 100644
@@ -168,6 +168,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride-r3.dtb
 sc7180-acer-aspire1-el2-dtbs	:= sc7180-acer-aspire1.dtb sc7180-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb sc7180-acer-aspire1-el2.dtb
+sc7180-ecs-liva-qc710-el2-dtbs	:= sc7180-ecs-liva-qc710.dtb sc7180-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-ecs-liva-qc710.dtb sc7180-ecs-liva-qc710-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +617 -0

617 lines not on this page · raw message

Signature · 1 line
2.51.2
Reviewed-by on v2 6/7
#11 lore raw

Re: [PATCH v2 6/7] arm64: dts: qcom: Add support for ECS LIVA QC710

Quoted 17 lines · Val Packett

Add a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.

Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)

Not included:
- HDMI Audio
- EC (IT8987)

---

[...]

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 467

Quoted 7 lines

+&tlmm {

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6 -0
+	/*
+	 * The TZ seem to protect those because some boards can have
+	 * fingerprint sensor connected to this range. Not connected
+	 * on this board
+	 */
+	gpio-reserved-ranges = <58 5>;

Would it still work with <59 4>? 58 seems to not be related to a QUP, rather as an audio MCLK output (would that be why +Nikita couldn't get some sort of audio working on his aspire1? That DT has it reserved too)

[...]

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 549

Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +4 -0
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <2>;
+			bias-pull-up;

here you do:

drive-strength
bias-

[...]

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 569

Quoted 6 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6 -0
+	sdc2_default: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};

here you do the inverse

(the former is preferred/more common)

otherwise

Konrad

#12 lore raw

Re: [PATCH v2 6/7] arm64: dts: qcom: Add support for ECS LIVA QC710

Konrad Dybcio писал(а) 21.01.2026 16:20:

Quoted 20 lines · Val Packett
Quoted 17 lines

Add a device tree for the ECS LIVA QC710 (Snapdragon 7c) mini PC/devkit.

Working:
- Wi-Fi (wcn3990 hw1.0)
- Bluetooth
- USB Type-A (USB3 and USB2)
- Ethernet (over USB2)
- HDMI Display
- eMMC
- SDHC (microSD slot)

Not included:
- HDMI Audio
- EC (IT8987)

---

[...]

Quoted 12 lines

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 467

Quoted 7 lines

+&tlmm {

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6 -0
+	/*
+	 * The TZ seem to protect those because some boards can have
+	 * fingerprint sensor connected to this range. Not connected
+	 * on this board
+	 */
+	gpio-reserved-ranges = <58 5>;

Would it still work with <59 4>? 58 seems to not be related to a QUP, rather as an audio MCLK output (would that be why +Nikita couldn't get some sort of audio working on his aspire1? That DT has it reserved too)

FWIW according to aspire1 schematic GPIO 57 is codec mclk (which is implemented and works perfectly, only DMIC connected to the soc instead of said codec is broken); GPIO 58~62 are NC with a note "Finger Printer" [sic] near them. There is no bracket annotation to associate the note to specific pin range, but it's smack in the middle of 58~62 range and from the fact that 63 (speaker amp bclk) and pretty much every other pin later is also used, I guessed all 5 are actually reserved. It's possible that one of them is not actually reserved by the firmware but probably not the source of aspire1 issues (the dmic is connected to lpass tlmm anyway) or perhaps they reserved 58 to be an interrupt input for the fp, or something like that...

Nikita

Quoted 30 lines

[...]

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 549

Quoted 4 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +4 -0
+		data-pins {
+			pins = "sdc1_data";
+			drive-strength = <2>;
+			bias-pull-up;

here you do:

drive-strength
bias-

[...]

arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts line 569

Quoted 6 lines
arch/arm64/boot/dts/qcom/sc7180-ecs-liva-qc710.dts new file +6 -0
+	sdc2_default: sdc2-default-state {
+		clk-pins {
+			pins = "sdc2_clk";
+			bias-disable;
+			drive-strength = <16>;
+		};

here you do the inverse

(the former is preferred/more common)

otherwise

Konrad

#13 lore raw

PATCH v2 7/7 firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710

In reply to Val Packett

Allow this machine to access efivars through qseecom/uefisecapp.

---
 drivers/firmware/qcom/qcom_scm.c | 1 +
 1 file changed, 1 insertion(+)
drivers/firmware/qcom/qcom_scm.c +1 -0
index 8fbc96693a55..b5738fb88f90 100644
@@ -2295,6 +2295,7 @@ static const struct of_device_id qcom_scm_qseecom_allowlist[] __maybe_unused = {
 	{ .compatible = "dell,inspiron-14-plus-7441" },
 	{ .compatible = "dell,latitude-7455" },
 	{ .compatible = "dell,xps13-9345" },
+	{ .compatible = "ecs,liva-qc710" },
 	{ .compatible = "hp,elitebook-ultra-g1q" },
 	{ .compatible = "hp,omnibook-x14" },
 	{ .compatible = "huawei,gaokun3" },
Signature · 1 line
2.51.2
#14 lore raw

Re: (subset) [PATCH v2 0/7] Add support for ECS LIVA QC710 mini PC/devkit

In reply to Val Packett
Quoted 11 lines · Val Packett

v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags

[...]

Applied to drm-misc-next, thanks!

[2/7] dt-bindings: vendor-prefixes: Add AlgolTek

      commit: 00e6f8f60601b412e400873c8972f3e3802557f3
[4/7] dt-bindings: display: bridge: simple: document the Algoltek AG6311 DP-to-HDMI bridge
      commit: e58be49a9a09112fdb4e4d68b4653a2545746091
[5/7] drm/bridge: simple: add the Algoltek AG6311 DP-to-HDMI bridge
      commit: d51e390ae84857a999ad2046e074e97663e98e36

Best regards,

Signature · 2 lines
With best wishes
Dmitry
maintainer Applied
#15 lore raw

Re: (subset) [PATCH v2 0/7] Add support for ECS LIVA QC710 mini PC/devkit

In reply to Val Packett
Quoted 11 lines · Val Packett

v2:
* Added missing dt-bindings:vendor-prefixes patches
* Applied suggested cleanups and formatting
* Dropped power-on disable block
* Added qcom,uefi-rtc-info for the RTC
* Added qcom,calibration-variant for the WiFi
* Board file sent: https://lists.infradead.org/pipermail/ath10k/2026-January/016719.html
* Added a comment about USB ports on the HS hub
* Picked up tags

[...]

Applied, thanks!

[7/7] firmware: qcom: scm: Allow QSEECOM on ECS LIVA QC710

      commit: 34a49e8508b5d00816d25fe3758b474471e7e051

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>