Skip to contentSkip to conversation

Add command for getting ramsize in scripts

PATCH Superseded Frank Wunderlich 1 participant 4 messages Jan 24

v5 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v5 cover Add command for getting ramsize in scripts

From: Frank Wunderlich <[email protected]>

Add command for getting ramsize in scripts

v5:
- move msize to meminfo and drop first param (always display as MiB)
- rename msize to memsize
- add doc and test so it becomes a series

Frank Wunderlich (3):
cmd: mem: add command for getting ram size for use in scripts
test: cmd: add test for memsize
doc: cmd: add usage doc for memsize

 cmd/Kconfig               |  7 +++++++
 cmd/meminfo.c             | 25 +++++++++++++++++++++++
 doc/usage/cmd/memsize.rst | 43 +++++++++++++++++++++++++++++++++++++++
 test/cmd/meminfo.c        | 17 ++++++++++++++++
 4 files changed, 92 insertions(+)
 create mode 100644 doc/usage/cmd/memsize.rst
Signature · 1 line
2.43.0
#1 lore raw

PATCH v5 1/3 cmd: mem: add command for getting ram size for use in scripts

From: Frank Wunderlich <[email protected]>

Add a command for getting detected ram size with possibility to assign it to an environment variable.

example usage:

BPI-R4> memsize
4096 MiB
BPI-R4> memsize memsz
BPI-R4> printenv memsz
memsz=4096
BPI-R4>

board with 8GB ram:

BPI-R4> memsize
8192 MiB
BPI-R4> memsize memsz
BPI-R4> printenv memsz
memsz=8192
BPI-R4>

---
v5: move msize to meminfo and drop first param (always display as MiB)
rename msize to memsize
v4: drop rounding to full MB/GB as it leads to wrong display
v3: add missing ifdefs
v2: add Kconfig entry

---
 cmd/Kconfig   |  6 ++++++
 cmd/meminfo.c | 25 +++++++++++++++++++++++++
 2 files changed, 31 insertions(+)
cmd/Kconfig +6 -0
index 5c611fb3016e..be79bf0747df 100644
@@ -925,6 +925,12 @@ config CMD_MEMINFO_MAP
 
 	  See doc/usage/cmd/meminfo.rst for more information.
 
+config CMD_MEMSIZE
+	bool "memsize"
+	depends on CMD_MEMINFO
+	help
+	  Get RAM via command for use in scripts.
+
 config CMD_MEMORY
 	bool "md, mm, nm, mw, cp, cmp, base, loop"
 	default y
cmd/meminfo.c +25 -0
index aa3b5bafe176..a4e951881ba0 100644
@@ -8,10 +8,12 @@
 #include <bootstage.h>
 #include <command.h>
 #include <display_options.h>
+#include <env.h>
 #include <lmb.h>
 #include <malloc.h>
 #include <mapmem.h>
 #include <asm/global_data.h>
+#include <linux/sizes.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -98,8 +100,31 @@ static int do_meminfo(struct cmd_tbl *cmdtp, int flag, int argc,
 	return 0;
 }
 
+#ifdef CONFIG_CMD_MEMSIZE
+static int do_mem_size(struct cmd_tbl *cmdtp, int flag, int argc,
+		       char *const argv[])
+{
+	u64 memsize = gd->ram_size / SZ_1M;
+
+	if (argc > 1)
+		env_set_ulong(argv[1], memsize);
+	else
+		printf("%lld MiB\n", memsize);
+
+	return 0;
+}
+#endif /* CONFIG_CMD_MEMSIZE */
+
 U_BOOT_CMD(
 	meminfo,	1,	1,	do_meminfo,
 	"display memory information",
 	""
 );
+
+#ifdef CONFIG_CMD_MEMSIZE
+U_BOOT_CMD(
+	memsize,	2,	1,	do_mem_size,
+	"get detected ram size in MiB, optional set env variable with value",
+	"[envvar]"
+);
+#endif /* CONFIG_CMD_MEMSIZE */
Signature · 1 line
2.43.0
#2 lore raw

PATCH v5 2/3 test: cmd: add test for memsize

In reply to Frank Wunderlich

From: Frank Wunderlich <[email protected]>

Add a test for memsize command in same way as meminfo.

---
tested via:

$ ./u-boot -T -c "ut cmd cmd_test_memsize"
...
Test: memsize: meminfo.c
Tests run: 1, 0 ms, average: 0 ms, failures: 0
---
 cmd/Kconfig        |  1 +
 test/cmd/meminfo.c | 17 +++++++++++++++++
 2 files changed, 18 insertions(+)
cmd/Kconfig +1 -0
index be79bf0747df..2bafa156ca8a 100644
@@ -927,6 +927,7 @@ config CMD_MEMINFO_MAP
 
 config CMD_MEMSIZE
 	bool "memsize"
+	default y if SANDBOX
 	depends on CMD_MEMINFO
 	help
 	  Get RAM via command for use in scripts.
test/cmd/meminfo.c +17 -0
index 53b41e3b49e0..ba772a8b7616 100644
@@ -7,6 +7,7 @@
  */
 
 #include <dm/test.h>
+#include <env.h>
 #include <test/cmd.h>
 #include <test/ut.h>
 
@@ -39,4 +40,20 @@ static int cmd_test_meminfo(struct unit_test_state *uts)
 
 	return 0;
 }
+
+/* Test 'memsize' command */
+static int cmd_test_memsize(struct unit_test_state *uts)
+{
+	ut_assertok(run_command("memsize", 0));
+	ut_assert_nextline("256 MiB");
+	ut_assert_console_end();
+
+	ut_assertok(run_command("memsize memsz", 0));
+	ut_asserteq_str("256", env_get("memsz"));
+	ut_assert_console_end();
+
+	return 0;
+}
+
 CMD_TEST(cmd_test_meminfo, UTF_CONSOLE);
+CMD_TEST(cmd_test_memsize, UTF_CONSOLE);
Signature · 1 line
2.43.0
#3 lore raw

PATCH v5 3/3 doc: cmd: add usage doc for memsize

In reply to Frank Wunderlich

From: Frank Wunderlich <[email protected]>

Add documentation for memsize command.

---
 doc/usage/cmd/memsize.rst | 43 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 doc/usage/cmd/memsize.rst
doc/usage/cmd/memsize.rst new file +43 -0
new file mode 100644
index 000000000000..4571795c7b41
@@ -0,0 +1,43 @@
+.. SPDX-License-Identifier: GPL-2.0+:
+
+.. index::
+   single: memsize (command)
+
+memsize command
+===============
+
+Synopsis
+--------
+
+::
+
+    memsize [name]
+
+Description
+-----------
+
+The memsize command shows the amount of memory in MiB.
+Optionally value can be assigned to an environment variable.
+
+Examples
+--------
+
+This first example shows printing of ram size:
+
+::
+
+  => memsize
+  8192 MiB
+
+This second example shows assign ram size to environment variable:
+
+::
+
+  => memsize memsz
+  => printenv memsz
+  memsz=8192
+
+Return value
+------------
+
+The return value is always 0 except error happens on setting environment variable.
Signature · 1 line
2.43.0