Skip to contentSkip to conversation

mptcp: fix stall because of data_ready

PATCH Superseded Gang Yan 1 participant 1 message Feb 9

Subsystems (2)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Gang Yan

author
#0 lore raw

PATCH v2 1/1 mptcp: fix stall because of data_ready

From: Gang Yan <[email protected]>

This patch fixes the second type of backlog_list stall issue that occurs when the data_ready callback attempts to trigger data transfer. The issue reproduces at approximately a 20% rate (once every five runs) when running multi_chunk.sh tests.

The stall occurs under the following conditions:
1. A large amount of out-of-order (OFO) data causes sk_rmem_alloc to exceed sk_rcvbuf
2. The skb matching the current ack_seq is not present in backlog_list
3. Data reception relies on data_ready callback notification

In this scenario, the data_ready callback (via mptcp_data_ready() -> sk->sk_data_ready()) attempts to trigger data movement, but __mptcp_move_skbs_from_subflow() repeatedly moves the ack_seq skb into backlog_list and returns false:

'''
msk->ack_seq:3442119990924456661, map_seq:3442119990924456661, offset:0, fin:0 [MPTCP_BACKLOG] #0 map_seq=3442119990924655746 end_seq=3442119990924660542 len=4796 [MPTCP_BACKLOG] #1 map_seq=3442119990924491850 end_seq=3442119990924500364 len=8514 [MPTCP_BACKLOG] #2 map_seq=3442119990924660542 end_seq=3442119990924726001 len=65459 [MPTCP_BACKLOG] #3 map_seq=3442119990924508114 end_seq=3442119990924514971 len=6857 [MPTCP_BACKLOG] #4 map_seq=3442119990924726001 end_seq=3442119990924731093 len=5092 [MPTCP_BACKLOG] #5 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #6 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #7 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #8 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #9 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #10 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #11 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649 [MPTCP_BACKLOG] #12 map_seq=3442119990924456661 end_seq=3442119990924464310 len=7649
...
'''

The fix allows moving in-sequence SKBs (map_seq == ack_seq) even when the receive buffer is full, preventing the stall condition.

Fixes 6228efe0cc01 ("mptcp: leverage the backlog for RX packet processing")

---

Notes:
changelog:
v2:
- As suggested by Paolo, the previous empty‑queue check on the receive queue has been replaced with a check that permits in‑sequence SKBs.

 net/mptcp/protocol.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/mptcp/protocol.c +2 -1
index c020882521b4..25ed246db7fb 100644
@@ -739,7 +739,8 @@ static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
 
 			mptcp_init_skb(ssk, skb, offset, len);
 
-			if (own_msk && sk_rmem_alloc_get(sk) < sk->sk_rcvbuf) {
+			if (own_msk && (sk_rmem_alloc_get(sk) < sk->sk_rcvbuf ||
+					MPTCP_SKB_CB(skb)->map_seq == msk->ack_seq)) {
 				mptcp_subflow_lend_fwdmem(subflow, skb);
 				ret |= __mptcp_move_skb(sk, skb);
 			} else {
Signature · 1 line
2.43.0