Skip to contentSkip to conversation

bonding: alb: fix UAF in rlb_arp_recv during bond up/down

PATCH Applied Hangbin Liu 2 participants 2 messages Feb 18 – Feb 19

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 bonding: alb: fix UAF in rlb_arp_recv during bond up/down

The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN.

However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag.

[  214.174138] Oops: general protection fault, probably for non-canonical address 0xdffffc000000001d: 0000 [#1] SMP KASAN PTI
[  214.186478] KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
[  214.194933] CPU: 30 UID: 0 PID: 2375 Comm: ping Kdump: loaded Not tainted 6.19.0-rc8+ #2 PREEMPT(voluntary)
[  214.205907] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.14.0 01/14/2022
[  214.214357] RIP: 0010:rlb_arp_recv+0x505/0xab0 [bonding]
[  214.220320] Code: 0f 85 2b 05 00 00 48 b8 00 00 00 00 00 fc ff df 40 0f b6 ed 48 c1 e5 06 49 03 ad 78 01 00 00 48 8d 7d 28 48 89 fa 48 c1 ea 03 <0f> b6
 04 02 84 c0 74 06 0f 8e 12 05 00 00 80 7d 28 00 0f 84 8c 00
[  214.241280] RSP: 0018:ffffc900073d8870 EFLAGS: 00010206
[  214.247116] RAX: dffffc0000000000 RBX: ffff888168556822 RCX: ffff88816855681e
[  214.255082] RDX: 000000000000001d RSI: dffffc0000000000 RDI: 00000000000000e8
[  214.263048] RBP: 00000000000000c0 R08: 0000000000000002 R09: ffffed11192021c8
[  214.271013] R10: ffff8888c9010e43 R11: 0000000000000001 R12: 1ffff92000e7b119
[  214.278978] R13: ffff8888c9010e00 R14: ffff888168556822 R15: ffff888168556810
[  214.286943] FS:  00007f85d2d9cb80(0000) GS:ffff88886ccb3000(0000) knlGS:0000000000000000
[  214.295966] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  214.302380] CR2: 00007f0d047b5e34 CR3: 00000008a1c2e002 CR4: 00000000001726f0
[  214.310347] Call Trace:
[  214.313070]  <IRQ>
[  214.315318]  ? __pfx_rlb_arp_recv+0x10/0x10 [bonding]
[  214.320975]  bond_handle_frame+0x166/0xb60 [bonding]
[  214.326537]  ? __pfx_bond_handle_frame+0x10/0x10 [bonding]
[  214.332680]  __netif_receive_skb_core.constprop.0+0x576/0x2710
[  214.339199]  ? __pfx_arp_process+0x10/0x10
[  214.343775]  ? sched_balance_find_src_group+0x98/0x630
[  214.349513]  ? __pfx___netif_receive_skb_core.constprop.0+0x10/0x10
[  214.356513]  ? arp_rcv+0x307/0x690
[  214.360311]  ? __pfx_arp_rcv+0x10/0x10
[  214.364499]  ? __lock_acquire+0x58c/0xbd0
[  214.368975]  __netif_receive_skb_one_core+0xae/0x1b0
[  214.374518]  ? __pfx___netif_receive_skb_one_core+0x10/0x10
[  214.380743]  ? lock_acquire+0x10b/0x140
[  214.385026]  process_backlog+0x3f1/0x13a0
[  214.389502]  ? process_backlog+0x3aa/0x13a0
[  214.394174]  __napi_poll.constprop.0+0x9f/0x370
[  214.399233]  net_rx_action+0x8c1/0xe60
[  214.403423]  ? __pfx_net_rx_action+0x10/0x10
[  214.408193]  ? lock_acquire.part.0+0xbd/0x260
[  214.413058]  ? sched_clock_cpu+0x6c/0x540
[  214.417540]  ? mark_held_locks+0x40/0x70
[  214.421920]  handle_softirqs+0x1fd/0x860
[  214.426302]  ? __pfx_handle_softirqs+0x10/0x10
[  214.431264]  ? __neigh_event_send+0x2d6/0xf50
[  214.436131]  do_softirq+0xb1/0xf0
[  214.439830]  </IRQ>

The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where rlb_arp_recv() can race with rlb_deinitialize() and dereference a freed rx_hashtbl entry.

Fix this by setting recv_probe to NULL and then calling synchronize_net() to wait for any concurrent RX processing to finish. This ensures that no RX handler can access rx_hashtbl after it is freed in bond_alb_deinitialize().

Fixes 3aba891dde38 ("bonding: move processing of recv handlers into handle_frame()")

---

v3: Use WRITE_ONCE to set recv_probe, and update fixes tag (Jakub Kicinski)
v2: make the description more clear (Jay)

---
 drivers/net/bonding/bond_main.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +5 -1
index 78cff904cdc3..55a960da42b5 100644
@@ -4343,9 +4343,13 @@ static int bond_close(struct net_device *bond_dev)
 
 	bond_work_cancel_all(bond);
 	bond->send_peer_notif = 0;
+	WRITE_ONCE(bond->recv_probe, NULL);
+
+	/* Wait for any in-flight RX handlers */
+	synchronize_net();
+
 	if (bond_is_lb(bond))
 		bond_alb_deinitialize(bond);
-	bond->recv_probe = NULL;
 
 	if (BOND_MODE(bond) == BOND_MODE_8023AD &&
 	    bond->params.broadcast_neighbor)
Signature · 1 line
2.50.1
#1 lore raw
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 11 lines · On Wed, 18 Feb 2026 06:09:19 +0000 you wrote:

The ALB RX path may access rx_hashtbl concurrently with bond teardown. During rapid bond up/down cycles, rlb_deinitialize() frees rx_hashtbl while RX handlers are still running, leading to a null pointer dereference detected by KASAN.

However, the root cause is that rlb_arp_recv() can still be accessed after setting recv_probe to NULL, which is actually a use-after-free (UAF) issue. That is the reason for using the referenced commit in the Fixes tag.

[...]

Here is the summary with links:
- [PATCHv3,net] bonding: alb: fix UAF in rlb_arp_recv during bond up/down

    https://git.kernel.org/netdev/net/c/e6834a4c4746

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html