Skip to contentSkip to conversation

i2c: rtl9300: support for RTL9607C I2C controller

PATCH Superseded Rustam Adilov 3 participants 13 messages Mar 26 – Apr 1

Subsystems (3)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover i2c: rtl9300: support for RTL9607C I2C controller

This patch series for the RTL9300 I2C driver adds i2c support for RTL9607C SoC. They are somewhat different to the RTL9300 and RTL9310 but not enough to warrant a new whole driver.

The patch series was split into patches that add/change something in the driver to smooth out the RTL9607C support addition in the end and for ease of review. Because of that, the patch 8 depends on all the prior patches before it.

RTL9607C primarly uses the i2c controller for communication with laser driver over on i2c interface 1 or 2.

I have successfully tested the byte read operations on my RTL9607C board which has GN25L95 laser driver in OpenWrt.

This patch series now depends on the patch [1] from Jan Kantert.

[1] -
https://lore.kernel.org/all/[email protected]/

---
Changelog in v5
- reworded the commit message in Patch 5 to make it clear that the existing devices also have i2c master controller clocks.
- Link to v4: https://lore.kernel.org/linux-i2c/[email protected]/

Changelog in v4
- moved the patch 7 that changes bindings to be before patch 5 where clk
is introduced in the driver.
- changed the "realtek,rtl9607-i2c" compatible to require the "clocks" to be specified and with it moved it out of "realtek,rtl9310-i2c" check to its own place for cleanliness (how it was originally in v1).
- Link to v3: https://lore.kernel.org/linux-i2c/[email protected]/

Changelog in v3
- Patch 7
- reworded the commit message to better describe i2c clock.
- make clocks property available for all compatibles.
- change "realtek,rtl9607-i2c" compatible to be under the same if statement

    as "realtek,rtl9310-i2c" for "realtek,scl".

- Link to v2: https://lore.kernel.org/linux-i2c/[email protected]/

Changelog in v2
- rebased on top of the patch from Jan Kantert.
- Patch 7 (to my best understanding of Krzysztof's request):
- added the "clocks: false" for compatibles that are not realtek,rtl9607-i2c.
- Link to v1: https://lore.kernel.org/linux-i2c/[email protected]/

Rustam Adilov (8):
i2c: rtl9300: split data_reg into read and write reg
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce a property for 8 bit width reg address
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C
support
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
i2c: rtl9300: intoduce new function properties to driver data
i2c: rtl9300: add RTL9607C i2c controller support

 .../bindings/i2c/realtek,rtl9301-i2c.yaml     |  15 ++
 drivers/i2c/busses/i2c-rtl9300.c              | 191 ++++++++++++++----
 2 files changed, 171 insertions(+), 35 deletions(-)
Signature · 1 line
2.53.0
#1 lore raw

PATCH v5 1/8 i2c: rtl9300: split data_reg into read and write reg

In RTL9607C i2c controller, there are 2 separate registers for reads and writes as opposed the combined 1 on rtl9300 and rtl9310.

In preparation for RTL9607C support, split it up into rd_reg and wd_reg properties and change the i2c read and write functions accordingly.

---
 drivers/i2c/busses/i2c-rtl9300.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/i2c/busses/i2c-rtl9300.c +15 -10
index 67a5c4228fc9..9bf4c6b08e05 100644
@@ -61,7 +61,8 @@ enum rtl9300_i2c_reg_fields {
 struct rtl9300_i2c_drv_data {
 	struct rtl9300_i2c_reg_field field_desc[F_NUM_FIELDS];
 	int (*select_scl)(struct rtl9300_i2c *i2c, u8 scl);
-	u32 data_reg;
+	u32 rd_reg;
+	u32 wd_reg;
 	u8 max_nchan;
 };
 
@@ -74,7 +75,8 @@ struct rtl9300_i2c {
 	struct rtl9300_i2c_chan chans[RTL9310_I2C_MUX_NCHAN];
 	struct regmap_field *fields[F_NUM_FIELDS];
 	u32 reg_base;
-	u32 data_reg;
+	u32 rd_reg;
+	u32 wd_reg;
 	u8 scl_num;
 	u8 sda_num;
 	struct mutex lock;
@@ -171,7 +173,7 @@ static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, u8 len)
 	if (len > 16)
 		return -EIO;
 
-	ret = regmap_bulk_read(i2c->regmap, i2c->data_reg, vals, ARRAY_SIZE(vals));
+	ret = regmap_bulk_read(i2c->regmap, i2c->rd_reg, vals, ARRAY_SIZE(vals));
 	if (ret)
 		return ret;
 
@@ -198,12 +200,12 @@ static int rtl9300_i2c_write(struct rtl9300_i2c *i2c, u8 *buf, u8 len)
 		vals[reg] |= buf[i] << shift;
 	}
 
-	return regmap_bulk_write(i2c->regmap, i2c->data_reg, vals, ARRAY_SIZE(vals));
+	return regmap_bulk_write(i2c->regmap, i2c->wd_reg, vals, ARRAY_SIZE(vals));
 }
 
 static int rtl9300_i2c_writel(struct rtl9300_i2c *i2c, u32 data)
 {
-	return regmap_write(i2c->regmap, i2c->data_reg, data);
+	return regmap_write(i2c->regmap, i2c->wd_reg, data);
 }
 
 static int rtl9300_i2c_prepare_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_xfer *xfer)
@@ -268,14 +270,14 @@ static int rtl9300_i2c_do_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_xfer
 	if (!xfer->write) {
 		switch (xfer->type) {
 		case RTL9300_I2C_XFER_BYTE:
-			ret = regmap_read(i2c->regmap, i2c->data_reg, &val);
+			ret = regmap_read(i2c->regmap, i2c->rd_reg, &val);
 			if (ret)
 				return ret;
 
 			*xfer->data = val & 0xff;
 			break;
 		case RTL9300_I2C_XFER_WORD:
-			ret = regmap_read(i2c->regmap, i2c->data_reg, &val);
+			ret = regmap_read(i2c->regmap, i2c->rd_reg, &val);
 			if (ret)
 				return ret;
 
@@ -408,7 +410,8 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 	if (device_get_child_node_count(dev) > drv_data->max_nchan)
 		return dev_err_probe(dev, -EINVAL, "Too many channels\n");
 
-	i2c->data_reg = i2c->reg_base + drv_data->data_reg;
+	i2c->rd_reg = i2c->reg_base + drv_data->rd_reg;
+	i2c->wd_reg = i2c->reg_base + drv_data->wd_reg;
 	for (i = 0; i < F_NUM_FIELDS; i++) {
 		fields[i] = drv_data->field_desc[i].field;
 		if (drv_data->field_desc[i].scope == REG_SCOPE_MASTER)
@@ -499,7 +502,8 @@ static const struct rtl9300_i2c_drv_data rtl9300_i2c_drv_data = {
 		[F_SDA_SEL]		= GLB_REG_FIELD(RTL9300_I2C_MST_GLB_CTRL, 0, 7),
 	},
 	.select_scl = rtl9300_i2c_select_scl,
-	.data_reg = RTL9300_I2C_MST_DATA_WORD0,
+	.rd_reg = RTL9300_I2C_MST_DATA_WORD0,
+	.wd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.max_nchan = RTL9300_I2C_MUX_NCHAN,
 };
 
@@ -519,7 +523,8 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 		[F_MEM_ADDR]		= MST_REG_FIELD(RTL9310_I2C_MST_MEMADDR_CTRL, 0, 23),
 	},
 	.select_scl = rtl9310_i2c_select_scl,
-	.data_reg = RTL9310_I2C_MST_DATA_CTRL,
+	.rd_reg = RTL9310_I2C_MST_DATA_CTRL,
+	.wd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.max_nchan = RTL9310_I2C_MUX_NCHAN,
 };
 
Signature · 1 line
2.53.0
#2 lore raw

PATCH v5 2/8 i2c: rtl9300: introduce max length property to driver data

In reply to Rustam Adilov

In RTL9607C i2c controller, theoretical maximum the data length can be is 4 bytes as opposed to 16 bytes on rtl9300 and rtl9310.

Introduce a new property to the driver data struct for that. Adjust if statement in prepare_xfer function to follow that new property instead of the hardcoded value.

---
 drivers/i2c/busses/i2c-rtl9300.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-rtl9300.c +8 -1
index 9bf4c6b08e05..2cada6038b44 100644
@@ -64,11 +64,14 @@ struct rtl9300_i2c_drv_data {
 	u32 rd_reg;
 	u32 wd_reg;
 	u8 max_nchan;
+	u8 max_data_len;
 };
 
 #define RTL9300_I2C_MUX_NCHAN	8
 #define RTL9310_I2C_MUX_NCHAN	12
 
+#define RTL9300_I2C_MAX_DATA_LEN	16
+
 struct rtl9300_i2c {
 	struct regmap *regmap;
 	struct device *dev;
@@ -210,9 +213,11 @@ static int rtl9300_i2c_writel(struct rtl9300_i2c *i2c, u32 data)
 
 static int rtl9300_i2c_prepare_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_xfer *xfer)
 {
+	const struct rtl9300_i2c_drv_data *drv_data;
 	int ret;
 
-	if (xfer->data_len < 1 || xfer->data_len > 16)
+	drv_data = device_get_match_data(i2c->dev);
+	if (xfer->data_len < 1 || xfer->data_len > drv_data->max_data_len)
 		return -EINVAL;
 
 	ret = regmap_field_write(i2c->fields[F_DEV_ADDR], xfer->dev_addr);
@@ -505,6 +510,7 @@ static const struct rtl9300_i2c_drv_data rtl9300_i2c_drv_data = {
 	.rd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.wd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.max_nchan = RTL9300_I2C_MUX_NCHAN,
+	.max_data_len = RTL9300_I2C_MAX_DATA_LEN,
 };
 
 static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
@@ -526,6 +532,7 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 	.rd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.wd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.max_nchan = RTL9310_I2C_MUX_NCHAN,
+	.max_data_len = RTL9300_I2C_MAX_DATA_LEN,
 };
 
 static const struct of_device_id i2c_rtl9300_dt_ids[] = {
Signature · 1 line
2.53.0
#3 lore raw

PATCH v5 3/8 i2c: rtl9300: introduce F_BUSY to the reg_fields struct

In reply to Rustam Adilov

In RTL9607C i2c controller the busy check operation is done on the separate bit of the command register as opposed to self clearing command trigger bit on the rtl9300 and rtl9310 i2c controllers.

Introduce a new F_BUSY field to the reg_fields struct for that and change the regmap read poll function to use F_BUSY instead of I2C_TRIG.

---
 drivers/i2c/busses/i2c-rtl9300.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-rtl9300.c +4 -1
index 2cada6038b44..e40b4692a3fa 100644
@@ -53,6 +53,7 @@ enum rtl9300_i2c_reg_fields {
 	F_SCL_SEL,
 	F_SDA_OUT_SEL,
 	F_SDA_SEL,
+	F_BUSY,
 
 	/* keep last */
 	F_NUM_FIELDS
@@ -262,7 +263,7 @@ static int rtl9300_i2c_do_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_xfer
 	if (ret)
 		return ret;
 
-	ret = regmap_field_read_poll_timeout(i2c->fields[F_I2C_TRIG], val, !val, 100, 100000);
+	ret = regmap_field_read_poll_timeout(i2c->fields[F_BUSY], val, !val, 100, 100000);
 	if (ret)
 		return ret;
 
@@ -505,6 +506,7 @@ static const struct rtl9300_i2c_drv_data rtl9300_i2c_drv_data = {
 		[F_MEM_ADDR_WIDTH]	= MST_REG_FIELD(RTL9300_I2C_MST_CTRL2, 2, 3),
 		[F_SCL_FREQ]		= MST_REG_FIELD(RTL9300_I2C_MST_CTRL2, 0, 1),
 		[F_SDA_SEL]		= GLB_REG_FIELD(RTL9300_I2C_MST_GLB_CTRL, 0, 7),
+		[F_BUSY]		= MST_REG_FIELD(RTL9300_I2C_MST_CTRL1, 0, 0),
 	},
 	.select_scl = rtl9300_i2c_select_scl,
 	.rd_reg = RTL9300_I2C_MST_DATA_WORD0,
@@ -527,6 +529,7 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 		[F_I2C_FAIL]		= MST_REG_FIELD(RTL9310_I2C_MST_CTRL, 1, 1),
 		[F_I2C_TRIG]		= MST_REG_FIELD(RTL9310_I2C_MST_CTRL, 0, 0),
 		[F_MEM_ADDR]		= MST_REG_FIELD(RTL9310_I2C_MST_MEMADDR_CTRL, 0, 23),
+		[F_BUSY]		= MST_REG_FIELD(RTL9310_I2C_MST_CTRL, 0, 0),
 	},
 	.select_scl = rtl9310_i2c_select_scl,
 	.rd_reg = RTL9310_I2C_MST_DATA_CTRL,
Signature · 1 line
2.53.0
#4 lore raw

PATCH v5 4/8 i2c: rtl9300: introduce a property for 8 bit width reg address

In reply to Rustam Adilov

In RTL9607C i2c controller, in order to indicate that the width of memory address is 8 bits, 0 is written to MEM_ADDR_WIDTH field as opposed to 1 for RTL9300 and RTL9310.

Introduce a new property to a driver data to indicate what value need to written to MEM_ADDR_WIDTH field for this case.

---
 drivers/i2c/busses/i2c-rtl9300.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-rtl9300.c +7 -1
index e40b4692a3fa..ffbc6c52861b 100644
@@ -66,6 +66,7 @@ struct rtl9300_i2c_drv_data {
 	u32 wd_reg;
 	u8 max_nchan;
 	u8 max_data_len;
+	u8 reg_addr_8bit_len;
 };
 
 #define RTL9300_I2C_MUX_NCHAN	8
@@ -111,6 +112,7 @@ struct rtl9300_i2c_xfer {
 #define RTL9300_I2C_MST_DATA_WORD2			0x10
 #define RTL9300_I2C_MST_DATA_WORD3			0x14
 #define RTL9300_I2C_MST_GLB_CTRL			0x384
+#define RTL9300_REG_ADDR_8BIT_LEN			1
 
 #define RTL9310_I2C_MST_IF_CTRL				0x1004
 #define RTL9310_I2C_MST_IF_SEL				0x1008
@@ -305,6 +307,7 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 				  union i2c_smbus_data *data)
 {
 	struct rtl9300_i2c_chan *chan = i2c_get_adapdata(adap);
+	const struct rtl9300_i2c_drv_data *drv_data;
 	struct rtl9300_i2c *i2c = chan->i2c;
 	struct rtl9300_i2c_xfer xfer = {0};
 	int ret;
@@ -314,6 +317,7 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 
 	guard(rtl9300_i2c)(i2c);
 
+	drv_data = device_get_match_data(i2c->dev);
 	ret = rtl9300_i2c_config_chan(i2c, chan);
 	if (ret)
 		return ret;
@@ -321,7 +325,7 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 	xfer.dev_addr = addr & 0x7f;
 	xfer.write = (read_write == I2C_SMBUS_WRITE);
 	xfer.reg_addr = command;
-	xfer.reg_addr_len = 1;
+	xfer.reg_addr_len = drv_data->reg_addr_8bit_len;
 
 	switch (size) {
 	case I2C_SMBUS_BYTE:
@@ -513,6 +517,7 @@ static const struct rtl9300_i2c_drv_data rtl9300_i2c_drv_data = {
 	.wd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.max_nchan = RTL9300_I2C_MUX_NCHAN,
 	.max_data_len = RTL9300_I2C_MAX_DATA_LEN,
+	.reg_addr_8bit_len = RTL9300_REG_ADDR_8BIT_LEN,
 };
 
 static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
@@ -536,6 +541,7 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 	.wd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.max_nchan = RTL9310_I2C_MUX_NCHAN,
 	.max_data_len = RTL9300_I2C_MAX_DATA_LEN,
+	.reg_addr_8bit_len = RTL9300_REG_ADDR_8BIT_LEN,
 };
 
 static const struct of_device_id i2c_rtl9300_dt_ids[] = {
Signature · 1 line
2.53.0
#5 lore raw

PATCH v5 5/8 dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support

In reply to Rustam Adilov

Add the "realtek,rtl9607-i2c" compatible for i2c controller on the RTL9607C SoC series.

Add a clocks property to the properties to describe the i2c reference clock and make it available for all the compatibles. This i2c reference clock is assumed to be coming from switchcore region via Lexra bus as the other SoC peripherals.

According to the info available about the existing devices, they also have the i2c master controller clocks.

RTL9607C requires the "realtek,scl" and "clocks" to be specified and so handle it under separate if check for "realtek,rtl9607-i2c".

---
 .../bindings/i2c/realtek,rtl9301-i2c.yaml         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +15 -0
index f9a449fee2b0..5873cfdc5b3e 100644
@@ -15,6 +15,8 @@ description:
   assigned to either I2C controller.
   RTL9310 SoCs have equal capabilities but support 12 common SDA lines which
   can be assigned to either I2C controller.
+  RTL9607C SoCs have equal capabilities but each controller only supports 1
+  SCL/SDA line.
 
 properties:
   compatible:
@@ -34,6 +36,7 @@ properties:
       - enum:
           - realtek,rtl9301-i2c
           - realtek,rtl9310-i2c
+          - realtek,rtl9607-i2c
 
   reg:
     items:
@@ -51,6 +54,9 @@ properties:
       The SCL line number of this I2C controller.
     enum: [ 0, 1 ]
 
+  clocks:
+    maxItems: 1
+
 patternProperties:
   '^i2c@[0-9ab]$':
     $ref: /schemas/i2c/i2c-controller.yaml
@@ -81,6 +87,15 @@ allOf:
     then:
       patternProperties:
         '^i2c@[89ab]$': false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9607-i2c
+    then:
+      required:
+        - realtek,scl
+        - clocks
 
 required:
   - compatible
Signature · 1 line
2.53.0
Acked-by on v5 5/8
#6 lore raw

Re: [PATCH v5 5/8] dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C support

Quoted 8 lines · Rustam Adilov

Add the "realtek,rtl9607-i2c" compatible for i2c controller on the RTL9607C SoC series.

Add a clocks property to the properties to describe the i2c reference clock and make it available for all the compatibles. This i2c reference clock is assumed to be coming from switchcore region via Lexra bus as the other SoC peripherals.

Quoted 7 lines

According to the info available about the existing devices, they also have the i2c master controller clocks.

RTL9607C requires the "realtek,scl" and "clocks" to be specified and so handle it under separate if check for "realtek,rtl9607-i2c".

pw-bot: not-applicable

#7 lore raw

PATCH v5 6/8 i2c: rtl9300: introduce clk struct for upcoming rtl9607 support

In reply to Rustam Adilov

In RTL9607C i2c controller, there is 10 bit CLK_DIV field for setting the clock of i2c interface which depends on the rate of i2c clk (which seems be fixed to 62.5MHz according to Realtek SDK).

Introduce the clk struct and the respective F_CLK_DIV and clk_div which are going to be used in the upcoming patch for rtl9607c i2c controller support addition.

devm_clk_get_optional_enabled() function was used for cleaner code as it automatically returns NULL if the clk is not present, which is going to be the case for RTL9300 and RTL9310 i2c controllers.

---
 drivers/i2c/busses/i2c-rtl9300.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/i2c/busses/i2c-rtl9300.c +8 -0
index ffbc6c52861b..16af49ccd1dd 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 
 #include <linux/bits.h>
+#include <linux/clk.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/mod_devicetable.h>
@@ -28,6 +29,7 @@ struct rtl9300_i2c_chan {
 	struct rtl9300_i2c *i2c;
 	enum rtl9300_bus_freq bus_freq;
 	u8 sda_num;
+	u32 clk_div;
 };
 
 enum rtl9300_i2c_reg_scope {
@@ -54,6 +56,7 @@ enum rtl9300_i2c_reg_fields {
 	F_SDA_OUT_SEL,
 	F_SDA_SEL,
 	F_BUSY,
+	F_CLK_DIV,
 
 	/* keep last */
 	F_NUM_FIELDS
@@ -85,6 +88,7 @@ struct rtl9300_i2c {
 	u8 scl_num;
 	u8 sda_num;
 	struct mutex lock;
+	struct clk *clk;
 };
 
 DEFINE_GUARD(rtl9300_i2c, struct rtl9300_i2c *, mutex_lock(&_T->lock), mutex_unlock(&_T->lock))
@@ -432,6 +436,10 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return dev_err_probe(dev, PTR_ERR(i2c->clk), "Failed to enable i2c clock\n");
+
 	i = 0;
 	for_each_child_of_node_scoped(dev->of_node, child) {
 		struct rtl9300_i2c_chan *chan = &i2c->chans[i];
Signature · 1 line
2.53.0
#8 lore raw

PATCH v5 7/8 i2c: rtl9300: intoduce new function properties to driver data

In reply to Rustam Adilov

Due to the very nature of differences between RTL9607C i2c controller and RTL9300 / RTL9310 that are incompatible with each other in some areas of this driver, for example in clock configuration, channel configuration and initialization at the end of the probe, introduce new function properties to the driver data struct to handle those differences.

With these new properties, create configuration functions for RTL9300 and RTL9310 and assign them to their respective driver data structs.

---
 drivers/i2c/busses/i2c-rtl9300.c | 66 +++++++++++++++++++++-----------
 1 file changed, 44 insertions(+), 22 deletions(-)
drivers/i2c/busses/i2c-rtl9300.c +44 -22
index 16af49ccd1dd..b718b74afe0d 100644
@@ -65,6 +65,9 @@ enum rtl9300_i2c_reg_fields {
 struct rtl9300_i2c_drv_data {
 	struct rtl9300_i2c_reg_field field_desc[F_NUM_FIELDS];
 	int (*select_scl)(struct rtl9300_i2c *i2c, u8 scl);
+	int (*config_chan)(struct rtl9300_i2c *i2c, struct rtl9300_i2c_chan *chan);
+	void (*config_clock)(u32 clock_freq, struct rtl9300_i2c_chan *chan);
+	int (*misc_init)(struct rtl9300_i2c *i2c);
 	u32 rd_reg;
 	u32 wd_reg;
 	u8 max_nchan;
@@ -175,6 +178,30 @@ static int rtl9300_i2c_config_chan(struct rtl9300_i2c *i2c, struct rtl9300_i2c_c
 	return 0;
 }
 
+static void rtl9300_i2c_config_clock(u32 clock_freq, struct rtl9300_i2c_chan *chan)
+{
+	struct rtl9300_i2c *i2c = chan->i2c;
+
+	switch (clock_freq) {
+	case I2C_MAX_STANDARD_MODE_FREQ:
+		chan->bus_freq = RTL9300_I2C_STD_FREQ;
+		break;
+	case I2C_MAX_FAST_MODE_FREQ:
+		chan->bus_freq = RTL9300_I2C_FAST_FREQ;
+		break;
+	case RTL9300_I2C_MAX_SUPER_FAST_FREQ:
+		chan->bus_freq = RTL9300_I2C_SUPER_FAST_FREQ;
+		break;
+	case RTL9300_I2C_MAX_SLOW_FREQ:
+		chan->bus_freq = RTL9300_I2C_SLOW_FREQ;
+		break;
+	default:
+		dev_warn(i2c->dev, "SDA%d clock-frequency %d not supported using default\n",
+			 chan->sda_num, clock_freq);
+		break;
+	}
+}
+
 static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, u8 len)
 {
 	u32 vals[4] = {};
@@ -322,7 +349,7 @@ static int rtl9300_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, unsigned s
 	guard(rtl9300_i2c)(i2c);
 
 	drv_data = device_get_match_data(i2c->dev);
-	ret = rtl9300_i2c_config_chan(i2c, chan);
+	ret = drv_data->config_chan(i2c, chan);
 	if (ret)
 		return ret;
 
@@ -389,6 +416,12 @@ static struct i2c_adapter_quirks rtl9300_i2c_quirks = {
 	.max_write_len	= 16,
 };
 
+static int rtl9300_i2c_init(struct rtl9300_i2c *i2c)
+{
+	/* only use standard read format */
+	return regmap_field_write(i2c->fields[F_RD_MODE], 0);
+}
+
 static int rtl9300_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -453,27 +486,11 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 		if (ret)
 			clock_freq = I2C_MAX_STANDARD_MODE_FREQ;
 
-		switch (clock_freq) {
-		case I2C_MAX_STANDARD_MODE_FREQ:
-			chan->bus_freq = RTL9300_I2C_STD_FREQ;
-			break;
-		case I2C_MAX_FAST_MODE_FREQ:
-			chan->bus_freq = RTL9300_I2C_FAST_FREQ;
-			break;
-		case RTL9300_I2C_MAX_SUPER_FAST_FREQ:
-			chan->bus_freq = RTL9300_I2C_SUPER_FAST_FREQ;
-			break;
-		case RTL9300_I2C_MAX_SLOW_FREQ:
-			chan->bus_freq = RTL9300_I2C_SLOW_FREQ;
-			break;
-		default:
-			dev_warn(i2c->dev, "SDA%d clock-frequency %d not supported using default\n",
-				 sda_num, clock_freq);
-			break;
-		}
-
 		chan->sda_num = sda_num;
 		chan->i2c = i2c;
+
+		drv_data->config_clock(clock_freq, chan);
+
 		adap = &i2c->chans[i].adap;
 		adap->owner = THIS_MODULE;
 		adap->algo = &rtl9300_i2c_algo;
@@ -491,8 +508,7 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 	}
 	i2c->sda_num = 0xff;
 
-	/* only use standard read format */
-	ret = regmap_field_write(i2c->fields[F_RD_MODE], 0);
+	ret = drv_data->misc_init(i2c);
 	if (ret)
 		return ret;
 
@@ -521,6 +537,9 @@ static const struct rtl9300_i2c_drv_data rtl9300_i2c_drv_data = {
 		[F_BUSY]		= MST_REG_FIELD(RTL9300_I2C_MST_CTRL1, 0, 0),
 	},
 	.select_scl = rtl9300_i2c_select_scl,
+	.config_chan = rtl9300_i2c_config_chan,
+	.config_clock = rtl9300_i2c_config_clock,
+	.misc_init = rtl9300_i2c_init,
 	.rd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.wd_reg = RTL9300_I2C_MST_DATA_WORD0,
 	.max_nchan = RTL9300_I2C_MUX_NCHAN,
@@ -545,6 +564,9 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 		[F_BUSY]		= MST_REG_FIELD(RTL9310_I2C_MST_CTRL, 0, 0),
 	},
 	.select_scl = rtl9310_i2c_select_scl,
+	.config_chan = rtl9300_i2c_config_chan,
+	.config_clock = rtl9300_i2c_config_clock,
+	.misc_init = rtl9300_i2c_init,
 	.rd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.wd_reg = RTL9310_I2C_MST_DATA_CTRL,
 	.max_nchan = RTL9310_I2C_MUX_NCHAN,
Signature · 1 line
2.53.0
#9 lore raw

PATCH v5 8/8 i2c: rtl9300: add RTL9607C i2c controller support

In reply to Rustam Adilov

Add support for the internal I2C controllers of RTL9607C series based SoCs. Add register definitions, chip-specific functions and macros too.

Make use of the clk introduced from the previous patch to get the clk_div value and use it during the rtl9607c channel configuration.

Introduce a new EXT_SCK_5MS field to the reg fields struct which is going to be initialized by rtl9607c init function at the end of the probe.

This patch depends on all the previous patches in this patch series.

---
 drivers/i2c/busses/i2c-rtl9300.c | 70 ++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)
drivers/i2c/busses/i2c-rtl9300.c +70 -0
index b718b74afe0d..8cedffbb2964 100644
@@ -57,6 +57,7 @@ enum rtl9300_i2c_reg_fields {
 	F_SDA_SEL,
 	F_BUSY,
 	F_CLK_DIV,
+	F_EXT_SCK_5MS,
 
 	/* keep last */
 	F_NUM_FIELDS
@@ -77,8 +78,10 @@ struct rtl9300_i2c_drv_data {
 
 #define RTL9300_I2C_MUX_NCHAN	8
 #define RTL9310_I2C_MUX_NCHAN	12
+#define RTL9607_I2C_MUX_NCHAN	1
 
 #define RTL9300_I2C_MAX_DATA_LEN	16
+#define RTL9607_I2C_MAX_DATA_LEN	4
 
 struct rtl9300_i2c {
 	struct regmap *regmap;
@@ -127,6 +130,14 @@ struct rtl9300_i2c_xfer {
 #define RTL9310_I2C_MST_MEMADDR_CTRL			0x4
 #define RTL9310_I2C_MST_DATA_CTRL			0x8
 
+#define RTL9607_I2C_CONFIG				0x22f50
+#define RTL9607_IO_MODE_EN				0x23014
+#define RTL9607_I2C_IND_WD				0x0
+#define RTL9607_I2C_IND_ADR				0x8
+#define RTL9607_I2C_IND_CMD				0x10
+#define RTL9607_I2C_IND_RD				0x18
+#define RTL9607_REG_ADDR_8BIT_LEN			0
+
 static int rtl9300_i2c_reg_addr_set(struct rtl9300_i2c *i2c, u32 reg, u16 len)
 {
 	int ret;
@@ -178,6 +189,27 @@ static int rtl9300_i2c_config_chan(struct rtl9300_i2c *i2c, struct rtl9300_i2c_c
 	return 0;
 }
 
+static int rtl9607_i2c_config_chan(struct rtl9300_i2c *i2c, struct rtl9300_i2c_chan *chan)
+{
+	const struct rtl9300_i2c_drv_data *drv_data;
+	int ret;
+
+	if (i2c->sda_num == chan->sda_num)
+		return 0;
+
+	ret = regmap_field_write(i2c->fields[F_CLK_DIV], chan->clk_div);
+	if (ret)
+		return ret;
+
+	drv_data = device_get_match_data(i2c->dev);
+	ret = drv_data->select_scl(i2c, i2c->scl_num);
+	if (ret)
+		return ret;
+
+	i2c->sda_num = chan->sda_num;
+	return 0;
+}
+
 static void rtl9300_i2c_config_clock(u32 clock_freq, struct rtl9300_i2c_chan *chan)
 {
 	struct rtl9300_i2c *i2c = chan->i2c;
@@ -202,6 +234,13 @@ static void rtl9300_i2c_config_clock(u32 clock_freq, struct rtl9300_i2c_chan *ch
 	}
 }
 
+static void rtl9607_i2c_config_clock(u32 clock_freq, struct rtl9300_i2c_chan *chan)
+{
+	struct rtl9300_i2c *i2c = chan->i2c;
+
+	chan->clk_div = clk_get_rate(i2c->clk) / clock_freq - 1;
+}
+
 static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, u8 len)
 {
 	u32 vals[4] = {};
@@ -422,6 +461,11 @@ static int rtl9300_i2c_init(struct rtl9300_i2c *i2c)
 	return regmap_field_write(i2c->fields[F_RD_MODE], 0);
 }
 
+static int rtl9607_i2c_init(struct rtl9300_i2c *i2c)
+{
+	return regmap_field_write(i2c->fields[F_EXT_SCK_5MS], 1);
+}
+
 static int rtl9300_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -574,6 +618,31 @@ static const struct rtl9300_i2c_drv_data rtl9310_i2c_drv_data = {
 	.reg_addr_8bit_len = RTL9300_REG_ADDR_8BIT_LEN,
 };
 
+static const struct rtl9300_i2c_drv_data rtl9607_i2c_drv_data = {
+	.field_desc = {
+		[F_SCL_SEL]		= GLB_REG_FIELD(RTL9607_IO_MODE_EN, 13, 14),
+		[F_EXT_SCK_5MS]		= MST_REG_FIELD(RTL9607_I2C_CONFIG, 26, 26),
+		[F_DEV_ADDR]		= MST_REG_FIELD(RTL9607_I2C_CONFIG, 14, 20),
+		[F_MEM_ADDR_WIDTH]	= MST_REG_FIELD(RTL9607_I2C_CONFIG, 12, 13),
+		[F_DATA_WIDTH]		= MST_REG_FIELD(RTL9607_I2C_CONFIG, 10, 11),
+		[F_CLK_DIV]		= MST_REG_FIELD(RTL9607_I2C_CONFIG, 0, 9),
+		[F_I2C_FAIL]		= MST_REG_FIELD(RTL9607_I2C_IND_CMD, 3, 3),
+		[F_BUSY]		= MST_REG_FIELD(RTL9607_I2C_IND_CMD, 2, 2),
+		[F_RWOP]		= MST_REG_FIELD(RTL9607_I2C_IND_CMD, 1, 1),
+		[F_I2C_TRIG]		= MST_REG_FIELD(RTL9607_I2C_IND_CMD, 0, 0),
+		[F_MEM_ADDR]		= MST_REG_FIELD(RTL9607_I2C_IND_ADR, 0, 31),
+	},
+	.select_scl = rtl9310_i2c_select_scl,
+	.config_chan = rtl9607_i2c_config_chan,
+	.config_clock = rtl9607_i2c_config_clock,
+	.misc_init = rtl9607_i2c_init,
+	.rd_reg = RTL9607_I2C_IND_RD,
+	.wd_reg = RTL9607_I2C_IND_WD,
+	.max_nchan = RTL9607_I2C_MUX_NCHAN,
+	.max_data_len = RTL9607_I2C_MAX_DATA_LEN,
+	.reg_addr_8bit_len = RTL9607_REG_ADDR_8BIT_LEN,
+};
+
 static const struct of_device_id i2c_rtl9300_dt_ids[] = {
 	{ .compatible = "realtek,rtl9301-i2c", .data = (void *) &rtl9300_i2c_drv_data },
 	{ .compatible = "realtek,rtl9302b-i2c", .data = (void *) &rtl9300_i2c_drv_data },
@@ -583,6 +652,7 @@ static const struct of_device_id i2c_rtl9300_dt_ids[] = {
 	{ .compatible = "realtek,rtl9311-i2c", .data = (void *) &rtl9310_i2c_drv_data },
 	{ .compatible = "realtek,rtl9312-i2c", .data = (void *) &rtl9310_i2c_drv_data },
 	{ .compatible = "realtek,rtl9313-i2c", .data = (void *) &rtl9310_i2c_drv_data },
+	{ .compatible = "realtek,rtl9607-i2c", .data = (void *) &rtl9607_i2c_drv_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, i2c_rtl9300_dt_ids);
Signature · 1 line
2.53.0
maintainer
#10 lore raw
In reply to Rustam Adilov

Hi Rustam,

Quoted 9 lines

Rustam Adilov (8):
i2c: rtl9300: split data_reg into read and write reg
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce a property for 8 bit width reg address
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and RTL9607C
support
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
i2c: rtl9300: intoduce new function properties to driver data

Patch 7 does not apply (not even in i2c-host-next, next, mainline). Which branch are you on? Can you please rebase on top of i2c/i2c-host, please?

Thanks,
Andi

Quoted 1 line

i2c: rtl9300: add RTL9607C i2c controller support

#11 lore raw

Hello Andi,

Quoted 13 lines · Andi Shyti

Hi Rustam,

Quoted 10 lines

Rustam Adilov (8):
i2c: rtl9300: split data_reg into read and write reg
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce a property for 8 bit width reg address
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and
RTL9607C
support
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
i2c: rtl9300: intoduce new function properties to driver data

Quoted 8 lines

Patch 7 does not apply (not even in i2c-host-next, next, mainline). Which branch are you on? Can you please rebase on top of i2c/i2c-host, please?

Thanks,
Andi

Quoted 1 line

i2c: rtl9300: add RTL9607C i2c controller support

As per the request of Chris Packham [1] this whole patch sets depends on [2] to be applied first before my patches.
I don't know if you have seen it yet cause Jan Kantert didn't include you in the emails to the send the patch to.

Although, i just now have noticed patch 7 has a typo in its commit subject which i have to fix.

[1] - https://lore.kernel.org/linux-i2c/[email protected]/
[2] - https://lore.kernel.org/all/[email protected]/

Best,
Rustam

maintainer
#12 lore raw

Hi Rustam,

Quoted 28 lines · Rustam Adilov
Quoted 11 lines · Andi Shyti
Quoted 10 lines

Rustam Adilov (8):
i2c: rtl9300: split data_reg into read and write reg
i2c: rtl9300: introduce max length property to driver data
i2c: rtl9300: introduce F_BUSY to the reg_fields struct
i2c: rtl9300: introduce a property for 8 bit width reg address
dt-bindings: i2c: realtek,rtl9301-i2c: extend for clocks and
RTL9607C
support
i2c: rtl9300: introduce clk struct for upcoming rtl9607 support
i2c: rtl9300: intoduce new function properties to driver data

Quoted 8 lines

Patch 7 does not apply (not even in i2c-host-next, next, mainline). Which branch are you on? Can you please rebase on top of i2c/i2c-host, please?

Thanks,
Andi

Quoted 1 line

i2c: rtl9300: add RTL9607C i2c controller support

As per the request of Chris Packham [1] this whole patch sets depends on [2] to be applied
first before my patches.
I don't know if you have seen it yet cause Jan Kantert didn't include you in the emails to
the send the patch to.

Quoted 6 lines

Although, i just now have noticed patch 7 has a typo in its commit subject which i have to fix.

[1] - https://lore.kernel.org/linux-i2c/[email protected]/
[2] -
https://lore.kernel.org/all/[email protected]/

Thanks, I overlooked that. I will follow the dependencies.

Andi