dt-bindings: i2c: intel,ixp4xx-i2c: Convert to DT schema
Subsystems (2)
PATCH v3 1/1 dt-bindings: i2c: intel,ixp4xx-i2c: Convert to DT schema
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This conversion also adds the interrupts property, as it is used by the driver and existing DTS files but was not documented in the original binding.
---
v3:
- Add description for adding interrupts property in commit
v2: https://lore.kernel.org/linux-devicetree/[email protected]/T/#u
- Fix checkpatch.pl warnings
- Reorder compatibles in alphabetical order
Note:
* This patch is part of the GSoC2026 application process for device tree bindings conversions
* https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-Device-Tree-Bindings
--- .../devicetree/bindings/i2c/i2c-iop3xx.txt | 20 --------- .../bindings/i2c/intel,ixp4xx-i2c.yaml | 41 +++++++++++++++++++ 2 files changed, 41 insertions(+), 20 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt create mode 100644 Documentation/devicetree/bindings/i2c/intel,ixp4xx-i2c.yaml
Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt deleted +0 -20
@@ -1,20 +0,0 @@ -i2c Controller on XScale platforms such as IOP3xx and IXP4xx - -Required properties: -- compatible : Must be one of - "intel,iop3xx-i2c" - "intel,ixp4xx-i2c"; -- reg -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- Child nodes conforming to i2c bus binding - -Example: - -i2c@c8011000 { - compatible = "intel,ixp4xx-i2c"; - reg = <0xc8011000 0x18>; - interrupts = <33 IRQ_TYPE_LEVEL_LOW>; -};
Documentation/devicetree/bindings/i2c/intel,ixp4xx-i2c.yaml new file +41 -0
41 lines not on this page · raw message
Signature · 1 line
2.53.0
Quoted 6 lines · Shi Hao
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This conversion also adds the interrupts property, as it is used by the driver and existing DTS files but was not documented in the original binding.
Signed-off-by Shi Hao <[email protected]>---
Best regards,
Krzysztof
Hi,
Quoted 5 lines · Shi Hao
Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This conversion also adds the interrupts property, as it is used by the driver and existing DTS files but was not documented in the original binding.
Signed-off-by Shi Hao <[email protected]>
merged to i2c/i2c-host.
Thanks,
Andi