Skip to contentSkip to conversation

dt-bindings: i2c: intel,ixp4xx-i2c: Convert to DT schema

PATCH Applied Shi Hao 3 participants 3 messages Mar 30 – Mar 31

Subsystems (2)
lore
Share & tools
lore

Shi Hao

author
#0 lore raw

PATCH v3 1/1 dt-bindings: i2c: intel,ixp4xx-i2c: Convert to DT schema

Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This conversion also adds the interrupts property, as it is used by the driver and existing DTS files but was not documented in the original binding.

---

v3:

- Add description for adding interrupts property in commit

v2: https://lore.kernel.org/linux-devicetree/[email protected]/T/#u

- Fix checkpatch.pl warnings
- Reorder compatibles in alphabetical order

Note:
* This patch is part of the GSoC2026 application process for device tree bindings conversions
* https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-Device-Tree-Bindings

---
 .../devicetree/bindings/i2c/i2c-iop3xx.txt    | 20 ---------
 .../bindings/i2c/intel,ixp4xx-i2c.yaml        | 41 +++++++++++++++++++
 2 files changed, 41 insertions(+), 20 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/intel,ixp4xx-i2c.yaml
Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt deleted +0 -20
deleted file mode 100644
index dcc8390e0d24..000000000000
@@ -1,20 +0,0 @@
-i2c Controller on XScale platforms such as IOP3xx and IXP4xx
-
-Required properties:
-- compatible : Must be one of
-  "intel,iop3xx-i2c"
-  "intel,ixp4xx-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Example:
-
-i2c@c8011000 {
-	compatible = "intel,ixp4xx-i2c";
-	reg = <0xc8011000 0x18>;
-	interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
-};
Documentation/devicetree/bindings/i2c/intel,ixp4xx-i2c.yaml new file +41 -0

41 lines not on this page · raw message

Signature · 1 line
2.53.0
maintainer Applied
#2 lore raw
In reply to Shi Hao

Hi,

Quoted 5 lines · Shi Hao

Convert the IOP3xx and IXP4xx XScale bindings to DT schema. This conversion also adds the interrupts property, as it is used by the driver and existing DTS files but was not documented in the original binding.

merged to i2c/i2c-host.

Thanks,
Andi