Skip to contentSkip to conversation

common/sxe2: add common functions for sxe2 driver

PATCH Superseded [email protected] 2 participants 143 messages Apr 30 – May 13 Page 1 of 2

Subsystems (2)

v1 of 19 Superseded Latest is v19 →

lore
Share & tools
lore
#0 lore raw

cover common/sxe2: add common functions for sxe2 driver

From: Jie Liu <[email protected]>

This patch set implements core functionality for the SXE2 PMD, including basic driver framework, data path setup.

V1:
- Add sxe2 adapter

Jie Liu (9):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control net/sxe2: add data path for Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   3 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 684 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 368 ++++++++
 drivers/common/sxe2/sxe2_errno.h           | 113 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 584 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  65 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  25 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 974 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 249 ++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 815 +++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 40 files changed, 8831 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#1 lore raw

PATCH 1/9 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 0e0d83e1c6..a6c3319dec 100644
@@ -738,6 +738,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#2 lore raw

PATCH 2/9 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  3 +++
 4 files changed, 38 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +3 -0
index 060b26ff61..93fb0072a9 100644
@@ -55,6 +55,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
 
 Removed Items
 -------------
Signature · 1 line
2.47.3
#3 lore raw

PATCH 3/9 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#4 lore raw

PATCH 4/9 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#5 lore raw

PATCH 5/9 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#6 lore raw

PATCH 6/9 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#7 lore raw

PATCH 7/9 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#8 lore raw

PATCH 8/9 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#9 lore raw

PATCH 9/9 net/sxe2: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/net/sxe2/meson.build      |   1 +
 drivers/net/sxe2/sxe2_ethdev.c    |   6 +
 drivers/net/sxe2/sxe2_txrx.c      | 249 +++++++++
 drivers/net/sxe2/sxe2_txrx.h      |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c | 815 ++++++++++++++++++++++++++++++
 5 files changed, 1092 insertions(+)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/net/sxe2/meson.build +1 -0
index 803e47c1aa..761d624a88 100644
@@ -19,6 +19,7 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +6 -0
index c1a65f25ce..856da2c296 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -760,6 +764,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +815 -0

815 lines not on this page · raw message

Signature · 1 line
2.47.3
#10 lore raw

v2 cover net/sxe2: added Linkdata sxe2 ethernet driver

From: Jie Liu <[email protected]>

This patch set implements core functionality for the SXE PMD, which is a Linkdata sxe2 ethernet driver.

V1:
- Addressed AI comments

Jie Liu (9):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control net/sxe2: add data path for Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   3 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 684 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  26 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 974 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 249 ++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 782 +++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 40 files changed, 8688 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#11 lore raw

PATCH v2 1/9 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 0e0d83e1c6..a6c3319dec 100644
@@ -738,6 +738,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#12 lore raw

PATCH v2 2/9 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  3 +++
 4 files changed, 38 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +3 -0
index 060b26ff61..93fb0072a9 100644
@@ -55,6 +55,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
 
 Removed Items
 -------------
Signature · 1 line
2.47.3
#13 lore raw

PATCH v2 3/9 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#14 lore raw

PATCH v2 4/9 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#15 lore raw

PATCH v2 5/9 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#16 lore raw

PATCH v2 6/9 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#17 lore raw

PATCH v2 7/9 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#18 lore raw

PATCH v2 8/9 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#19 lore raw

PATCH v2 9/9 net/sxe2: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |   6 +
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 10 files changed, 1071 insertions(+), 122 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common_log.h +0 -105
index 8ade49d020..14074fcc4f 100644
@@ -260,109 +260,4 @@ sxe2_common_log_stream_init(void);
 
 #define PMD_INIT_FUNC_TRACE() PMD_LOG_DEBUG(INIT, " >>")
 
-#ifdef SXE2_DPDK_DEBUG
-
-#define LOG_DEBUG(fmt, ...) \
-		PMD_LOG_DEBUG(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO(fmt, ...) \
-		PMD_LOG_INFO(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN(fmt, ...) \
-		PMD_LOG_WARN(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR(fmt, ...) \
-		PMD_LOG_ERR(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_DEBUG_BDF(dev_name, fmt, ...) \
-		PMD_LOG_DEBUG(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO_BDF(dev_name, fmt, ...) \
-		PMD_LOG_INFO(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN_BDF(dev_name, fmt, ...) \
-		PMD_LOG_WARN(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR_BDF(dev_name, fmt, ...) \
-		PMD_LOG_ERR(HW, fmt, ##__VA_ARGS__)
-
-#else
-#define LOG_DEBUG(fmt, ...)
-#define LOG_INFO(fmt, ...)
-#define LOG_WARN(fmt, ...)
-#define LOG_ERROR(fmt, ...)
-#define LOG_DEBUG_BDF(dev_name, fmt, ...) \
-		PMD_LOG_DEBUG(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO_BDF(dev_name, fmt, ...) \
-		PMD_LOG_INFO(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN_BDF(dev_name, fmt, ...) \
-		PMD_LOG_WARN(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR_BDF(dev_name, fmt, ...) \
-		PMD_LOG_ERR(HW, fmt, ##__VA_ARGS__)
-#endif
-
-#ifdef SXE2_DPDK_DEBUG
-#define LOG_DEV_DEBUG(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_DEBUG_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_INFO(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_INFO_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_WARN(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_WARN_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_ERR(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_ERROR_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_DEBUG(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_DEBUG_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_INFO(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_INFO_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_WARN(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_WARN_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_ERR(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_ERROR_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#else
-
-#define LOG_DEV_DEBUG(fmt, ...)         RTE_SET_USED(adapter)
-#define LOG_DEV_INFO(fmt, ...)          RTE_SET_USED(adapter)
-#define LOG_DEV_WARN(fmt, ...)          RTE_SET_USED(adapter)
-#define LOG_DEV_ERR(fmt, ...)           RTE_SET_USED(adapter)
-#define LOG_MSG_DEBUG(msglvl, fmt, ...) RTE_SET_USED(adapter)
-#define LOG_MSG_INFO(msglvl, fmt, ...)  RTE_SET_USED(adapter)
-#define LOG_MSG_WARN(msglvl, fmt, ...)  RTE_SET_USED(adapter)
-#define LOG_MSG_ERR(msglvl, fmt, ...)   RTE_SET_USED(adapter)
-#endif
-
 #endif /* SXE2_COMMON_LOG_H__ */
drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +6 -0
index c1a65f25ce..856da2c296 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -760,6 +764,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#20 lore raw

v3 cover net/sxe2: added Linkdata sxe2 ethernet driver

From: Jie Liu <[email protected]>

This patch set implements core functionality for the SXE PMD, which is a Linkdata sxe2 ethernet driver.

V3: Addressed AI comments

Jie Liu (9):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control net/sxe2: add data path for Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   3 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 684 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  26 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 975 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 249 ++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 782 +++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 40 files changed, 8689 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#21 lore raw

PATCH v3 1/9 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 0e0d83e1c6..a6c3319dec 100644
@@ -738,6 +738,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#22 lore raw

PATCH v3 2/9 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  3 +++
 4 files changed, 38 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +3 -0
index 060b26ff61..93fb0072a9 100644
@@ -55,6 +55,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
 
 Removed Items
 -------------
Signature · 1 line
2.47.3
#23 lore raw

PATCH v3 3/9 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#24 lore raw

PATCH v3 4/9 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#25 lore raw

PATCH v3 5/9 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#26 lore raw

PATCH v3 6/9 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#27 lore raw

PATCH v3 7/9 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#28 lore raw

PATCH v3 8/9 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#29 lore raw

PATCH v3 9/9 net/sxe2: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 10 files changed, 1076 insertions(+), 126 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common_log.h +0 -105
index 8ade49d020..14074fcc4f 100644
@@ -260,109 +260,4 @@ sxe2_common_log_stream_init(void);
 
 #define PMD_INIT_FUNC_TRACE() PMD_LOG_DEBUG(INIT, " >>")
 
-#ifdef SXE2_DPDK_DEBUG
-
-#define LOG_DEBUG(fmt, ...) \
-		PMD_LOG_DEBUG(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO(fmt, ...) \
-		PMD_LOG_INFO(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN(fmt, ...) \
-		PMD_LOG_WARN(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR(fmt, ...) \
-		PMD_LOG_ERR(DRV, fmt, ##__VA_ARGS__)
-
-#define LOG_DEBUG_BDF(dev_name, fmt, ...) \
-		PMD_LOG_DEBUG(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO_BDF(dev_name, fmt, ...) \
-		PMD_LOG_INFO(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN_BDF(dev_name, fmt, ...) \
-		PMD_LOG_WARN(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR_BDF(dev_name, fmt, ...) \
-		PMD_LOG_ERR(HW, fmt, ##__VA_ARGS__)
-
-#else
-#define LOG_DEBUG(fmt, ...)
-#define LOG_INFO(fmt, ...)
-#define LOG_WARN(fmt, ...)
-#define LOG_ERROR(fmt, ...)
-#define LOG_DEBUG_BDF(dev_name, fmt, ...) \
-		PMD_LOG_DEBUG(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_INFO_BDF(dev_name, fmt, ...) \
-		PMD_LOG_INFO(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_WARN_BDF(dev_name, fmt, ...) \
-		PMD_LOG_WARN(HW, fmt, ##__VA_ARGS__)
-
-#define LOG_ERROR_BDF(dev_name, fmt, ...) \
-		PMD_LOG_ERR(HW, fmt, ##__VA_ARGS__)
-#endif
-
-#ifdef SXE2_DPDK_DEBUG
-#define LOG_DEV_DEBUG(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_DEBUG_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_INFO(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_INFO_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_WARN(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_WARN_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_DEV_ERR(fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_ERROR_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_DEBUG(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_DEBUG_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_INFO(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_INFO_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_WARN(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-		LOG_WARN_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#define LOG_MSG_ERR(msglvl, fmt, ...) \
-	do { \
-		RTE_SET_USED(adapter); \
-			LOG_ERROR_BDF(fmt, ##__VA_ARGS__); \
-	} while (0)
-
-#else
-
-#define LOG_DEV_DEBUG(fmt, ...)         RTE_SET_USED(adapter)
-#define LOG_DEV_INFO(fmt, ...)          RTE_SET_USED(adapter)
-#define LOG_DEV_WARN(fmt, ...)          RTE_SET_USED(adapter)
-#define LOG_DEV_ERR(fmt, ...)           RTE_SET_USED(adapter)
-#define LOG_MSG_DEBUG(msglvl, fmt, ...) RTE_SET_USED(adapter)
-#define LOG_MSG_INFO(msglvl, fmt, ...)  RTE_SET_USED(adapter)
-#define LOG_MSG_WARN(msglvl, fmt, ...)  RTE_SET_USED(adapter)
-#define LOG_MSG_ERR(msglvl, fmt, ...)   RTE_SET_USED(adapter)
-#endif
-
 #endif /* SXE2_COMMON_LOG_H__ */
drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#30 lore raw

v4 cover net/sxe2: added Linkdata sxe2 ethernet driver

From: Jie Liu <[email protected]>

This patch set implements core functionality for the SXE PMD driver.

V4:
- Addressed AI comments

Jie Liu (9):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control net/sxe2: add data path for Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   3 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  26 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 975 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 249 ++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 782 +++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 40 files changed, 8688 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#31 lore raw

PATCH v4 1/9 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 0e0d83e1c6..a6c3319dec 100644
@@ -738,6 +738,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#32 lore raw

PATCH v4 2/9 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  3 +++
 4 files changed, 38 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +3 -0
index 060b26ff61..93fb0072a9 100644
@@ -55,6 +55,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
 
 Removed Items
 -------------
Signature · 1 line
2.47.3
#33 lore raw

PATCH v4 3/9 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#34 lore raw

Re: [PATCH v4 3/9] drivers: add sxe2 basic structures

Quoted 7 lines · On Fri, 1 May 2026 09:59:18 +0800 [email protected] wrote:

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Quoted 7 lines

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---

NAK.

NAK.

DPDK drivers must not reinvent their own logging, and they absolutely must not hijack the log stream that is shared with the application and the rest of DPDK. This patch does both.

Concrete problems in what you posted:

1. PMD_LOG_NOTICE/WARN/ERR/CRIT/ALERT/EMERG call rte_openlog_stream(g_sxe2_common_log_fp) before logging and rte_openlog_stream(NULL) after. rte_openlog_stream() sets the *global* DPDK log stream for the entire application. A driver has no business deciding where the application's logs go. As written, this will silently redirect every other PMD's, every library's, and the application's own output any time sxe2 emits a message.

2. Those same macros emit the message twice -- once before the stream is swapped and once after -- so every NOTICE/WARN/ERR comes out duplicated.

3. Drivers must not open files. fopen("/var/log/sxe2pmd.log.<ts>", "w+") from inside a PMD is a security problem on every level:

- It runs with whatever privileges the application has, which for DPDK is typically root or CAP_*-loaded. Creating files in /var/log under those privileges is a classic symlink / TOCTOU attack surface.
- The path is attacker-influenceable in the timestamp component and is not created with O_CREAT|O_EXCL, no mode argument, no directory fd, none of the hardening you would expect.
- Log content is written without any escaping; anything an attacker can get into a log message ends up in a file the operator will later cat or grep.
- It bypasses whatever logging policy the operator, distro, systemd unit, container runtime, SELinux/AppArmor profile, or application has configured. A driver silently writing to /var/log is exactly the kind of thing those policies exist to prevent.
- It doesn't work for non-root users, in unprivileged containers, on read-only rootfs systems, or on Windows.

Drivers log through rte_log. The application decides where those logs go. Full stop.

4. RTE_LOG_REGISTER_SUFFIX(..., com, DEBUG) defaults the log type to DEBUG. The default level is the application's choice, not the driver's.

5. SXE2_DPDK_DEBUG is unconditionally defined in drivers/common/sxe2/meson.build, so the "debug" path with the file hijacking is always on. There is no off switch.

6. SXE2_PMD_LOG adds a thread id, basename, line number, and function name to every line. If those are useful, they are useful for every driver -- not just yours.

General principles, which apply to every driver:

- Drivers do not reinvent logging. Use RTE_LOG / RTE_LOG_LINE and a log type registered for the driver. That is it.
- Drivers do not open files, and do not change logging behavior that is shared with the application or with other drivers. Both have security implications well beyond this driver.
- If something is genuinely missing from the common logging infrastructure -- per-driver log files, richer prefixes, thread ids, structured fields, whatever -- propose it as a change to lib/log so every driver and every application benefits, and so it gets reviewed for security by people who do that for a living. Do not bury it inside one driver.
- "It works for our embedded use case" is not an argument. DPDK runs on Linux, FreeBSD, and Windows; on x86, Arm, POWER, and RISC-V; in bare metal, VMs, and containers; as root and as unprivileged users. A driver has to behave reasonably in all of those.
- Once we make an exception for one driver, every subsystem will expect one. That is not happening.

Please drop sxe2_common_log.c and sxe2_common_log.h entirely. Use the existing RTE_LOG_* macros directly against a log type registered for your driver, and respect the level and stream that the application has configured.

While you're at it, the same "this driver is a special snowflake" pattern shows up elsewhere in this series and gets the same answer:

- sxe2_type.h redefines u8/u16/u32/u64/s8/.../__le16/__be32 instead of using uintN_t and rte_beN_t.
- sxe2_errno.h reinvents errno values that already exist.
- sxe2_osal.h re-implements bitmap operations, allocation wrappers, and an OS abstraction layer that DPDK already provides.

This is the cost of being part of a shared community project across many platforms and architectures. Please rework on that basis before reposting.

Stephen

PS: AI revised this text, my initial version was probably not safe for public consumption.

#35 lore raw

PATCH v4 4/9 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#36 lore raw

PATCH v4 5/9 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#37 lore raw

PATCH v4 6/9 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#38 lore raw

PATCH v4 7/9 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#39 lore raw

PATCH v4 8/9 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#40 lore raw

PATCH v4 9/9 net/sxe2: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common.c     |  13 +-
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 11 files changed, 1082 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common.c +6 -7
index 537d4e9f6a..d2ed1460a3 100644
@@ -28,7 +28,7 @@ static TAILQ_HEAD(sxe2_class_drivers, sxe2_class_driver) sxe2_class_drivers_list
 static TAILQ_HEAD(sxe2_common_devices, sxe2_common_device) sxe2_common_devices_list =
 				TAILQ_HEAD_INITIALIZER(sxe2_common_devices_list);
 
-static pthread_mutex_t sxe2_common_devices_list_lock;
+static rte_spinlock_t sxe2_common_devices_list_lock;
 
 static struct rte_pci_id *sxe2_common_pci_id_table;
 
@@ -223,9 +223,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 	cdev->config.kernel_reset = false;
 	rte_ticketlock_init(&cdev->config.lock);
 
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_INSERT_TAIL(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 l_end:
 	return cdev;
@@ -233,10 +233,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 
 static void sxe2_common_device_free(struct sxe2_common_device *cdev)
 {
-
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_REMOVE(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 	rte_free(cdev);
 }
@@ -662,7 +661,7 @@ sxe2_common_init(void)
 	if (sxe2_commoin_inited)
 		goto l_end;
 
-	pthread_mutex_init(&sxe2_common_devices_list_lock, NULL);
+	rte_spinlock_init(&sxe2_common_devices_list_lock);
 #ifdef SXE2_DPDK_DEBUG
 	sxe2_common_log_stream_init();
 #endif
drivers/common/sxe2/sxe2_common_log.h +0 -105

109 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#41 lore raw

v5 cover net/sxe2: added Linkdata sxe2 ethernet driver

From: Jie Liu <[email protected]>

V5:
- Addressed AI comments

Jie Liu (9):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control net/sxe2: add data path for Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   3 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  26 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 975 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 249 ++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 782 +++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 40 files changed, 8688 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#42 lore raw

PATCH v5 1/9 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

Add Jie Liu's email to .mailmap file to ensure consistent author attribution across all commits. This helps maintain clean git history and ensures correct author information in release notes and changelogs.

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 0e0d83e1c6..a6c3319dec 100644
@@ -738,6 +738,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#43 lore raw

PATCH v5 2/9 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  3 +++
 4 files changed, 38 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +3 -0
index 060b26ff61..93fb0072a9 100644
@@ -55,6 +55,9 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
 
 Removed Items
 -------------
Signature · 1 line
2.47.3
#44 lore raw

PATCH v5 3/9 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#45 lore raw

Re: [PATCH v5 3/9] drivers: add sxe2 basic structures

Quoted 7 lines · On Fri, 1 May 2026 11:33:53 +0800 [email protected] wrote:

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Quoted 7 lines

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---

You ignored the feed back about drivers writing files and changing logging.

#46 lore raw

PATCH v5 4/9 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#47 lore raw

PATCH v5 5/9 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#48 lore raw

PATCH v5 6/9 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#49 lore raw

PATCH v5 7/9 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#50 lore raw

PATCH v5 8/9 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#51 lore raw

PATCH v5 9/9 net/sxe2: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common.c     |  13 +-
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 11 files changed, 1082 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common.c +6 -7
index 537d4e9f6a..d2ed1460a3 100644
@@ -28,7 +28,7 @@ static TAILQ_HEAD(sxe2_class_drivers, sxe2_class_driver) sxe2_class_drivers_list
 static TAILQ_HEAD(sxe2_common_devices, sxe2_common_device) sxe2_common_devices_list =
 				TAILQ_HEAD_INITIALIZER(sxe2_common_devices_list);
 
-static pthread_mutex_t sxe2_common_devices_list_lock;
+static rte_spinlock_t sxe2_common_devices_list_lock;
 
 static struct rte_pci_id *sxe2_common_pci_id_table;
 
@@ -223,9 +223,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 	cdev->config.kernel_reset = false;
 	rte_ticketlock_init(&cdev->config.lock);
 
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_INSERT_TAIL(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 l_end:
 	return cdev;
@@ -233,10 +233,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 
 static void sxe2_common_device_free(struct sxe2_common_device *cdev)
 {
-
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_REMOVE(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 	rte_free(cdev);
 }
@@ -662,7 +661,7 @@ sxe2_common_init(void)
 	if (sxe2_commoin_inited)
 		goto l_end;
 
-	pthread_mutex_init(&sxe2_common_devices_list_lock, NULL);
+	rte_spinlock_init(&sxe2_common_devices_list_lock);
 #ifdef SXE2_DPDK_DEBUG
 	sxe2_common_log_stream_init();
 #endif
drivers/common/sxe2/sxe2_common_log.h +0 -105

109 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#52 lore raw

v6 cover Add sxe2 driver

From: Jie Liu <[email protected]>

V6:
- Addressed AI comments

Jie Liu (10):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control
drivers: add data path for Rx and Tx net/sxe2: add vectorized Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   4 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  35 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 971 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 368 ++++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 966 ++++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  17 +
 drivers/net/sxe2/sxe2_txrx_vec.c           | 188 ++++
 drivers/net/sxe2/sxe2_txrx_vec.h           |  72 ++
 drivers/net/sxe2/sxe2_txrx_vec_common.h    | 235 +++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c       | 549 ++++++++++++
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 44 files changed, 10042 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#53 lore raw

PATCH v6 1/10 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 895412e568..d2c4485636 100644
@@ -739,6 +739,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#54 lore raw

PATCH v6 2/10 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  4 ++++
 4 files changed, 39 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +4 -0
index f012d47a4b..fa0f0f5cca 100644
@@ -64,6 +64,10 @@ New Features
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
+
 Removed Items
 -------------
 
Signature · 1 line
2.47.3
#55 lore raw

PATCH v6 3/10 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#56 lore raw

PATCH v6 4/10 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#57 lore raw

PATCH v6 5/10 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#58 lore raw

PATCH v6 6/10 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#59 lore raw

PATCH v6 7/10 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#60 lore raw

PATCH v6 8/10 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#61 lore raw

PATCH v6 9/10 drivers: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common.c     |  13 +-
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 11 files changed, 1082 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common.c +6 -7
index 537d4e9f6a..d2ed1460a3 100644
@@ -28,7 +28,7 @@ static TAILQ_HEAD(sxe2_class_drivers, sxe2_class_driver) sxe2_class_drivers_list
 static TAILQ_HEAD(sxe2_common_devices, sxe2_common_device) sxe2_common_devices_list =
 				TAILQ_HEAD_INITIALIZER(sxe2_common_devices_list);
 
-static pthread_mutex_t sxe2_common_devices_list_lock;
+static rte_spinlock_t sxe2_common_devices_list_lock;
 
 static struct rte_pci_id *sxe2_common_pci_id_table;
 
@@ -223,9 +223,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 	cdev->config.kernel_reset = false;
 	rte_ticketlock_init(&cdev->config.lock);
 
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_INSERT_TAIL(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 l_end:
 	return cdev;
@@ -233,10 +233,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 
 static void sxe2_common_device_free(struct sxe2_common_device *cdev)
 {
-
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_REMOVE(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 	rte_free(cdev);
 }
@@ -662,7 +661,7 @@ sxe2_common_init(void)
 	if (sxe2_commoin_inited)
 		goto l_end;
 
-	pthread_mutex_init(&sxe2_common_devices_list_lock, NULL);
+	rte_spinlock_init(&sxe2_common_devices_list_lock);
 #ifdef SXE2_DPDK_DEBUG
 	sxe2_common_log_stream_init();
 #endif
drivers/common/sxe2/sxe2_common_log.h +0 -105

109 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#62 lore raw

PATCH v6 10/10 net/sxe2: add vectorized Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch implements the vectorized data path for the sxe2 PMD. It utilizes SIMD instructions (e.g., SSE) to process multiple packets simultaneously, significantly improving throughput for small packet processing.

The implementation includes:
* Vectorized Rx burst function for bulk descriptor processing.
* Vectorized Tx burst function with optimized resource cleanup.
* Capability flags update to reflect vectorized path support.

---
 drivers/net/sxe2/meson.build            |   9 +
 drivers/net/sxe2/sxe2_ethdev.c          |   8 +-
 drivers/net/sxe2/sxe2_txrx.c            | 227 +++++++---
 drivers/net/sxe2/sxe2_txrx.h            |  12 +-
 drivers/net/sxe2/sxe2_txrx_poll.c       | 184 ++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h       |   3 +-
 drivers/net/sxe2/sxe2_txrx_vec.c        | 188 ++++++++
 drivers/net/sxe2/sxe2_txrx_vec.h        |  72 ++++
 drivers/net/sxe2/sxe2_txrx_vec_common.h | 235 ++++++++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c    | 549 ++++++++++++++++++++++++
 10 files changed, 1420 insertions(+), 67 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
drivers/net/sxe2/meson.build +9 -0
index 728a88b6a1..b9618f2964 100644
@@ -12,6 +12,14 @@ cflags += ['-g']
 
 deps += ['common_sxe2', 'hash','cryptodev','security']
 
+if arch_subdir == 'x86'
+        sources += files('sxe2_txrx_vec_sse.c')
+
+        if is_windows and cc.get_id() != 'clang'
+                cflags += ['-fno-asynchronous-unwind-tables']
+        endif
+endif
+
 sources += files(
         'sxe2_ethdev.c',
         'sxe2_cmd_chnl.c',
@@ -21,6 +29,7 @@ sources += files(
         'sxe2_rx.c',
         'sxe2_txrx_poll.c',
         'sxe2_txrx.c',
+        'sxe2_txrx_vec.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +2 -6
index 68d7e36cf1..7eaa1722d0 100644
@@ -58,17 +58,11 @@ static const struct rte_pci_id pci_id_sxe2_tbl[] = {
 };
 
 static struct sxe2_pci_map_addr_info sxe2_net_map_addr_info_pf[SXE2_PCI_MAP_RES_MAX_COUNT] = {
-	/* SXE2_PCI_MAP_RES_INVALID */
 	{0, 0, 0},
-	/* SXE2_PCI_MAP_RES_DOORBELL_TX */
 	{ SXE2_TXQ_LEGACY_DBLL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_DOORBELL_RX_TAIL */
 	{ SXE2_RXQ_TAIL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_DYN */
 	{ SXE2_VF_DYN_CTL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_ITR(默认使用ITR0) */
 	{ SXE2_VF_INT_ITR(0, 0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_MSIX */
 	{ SXE2_BAR4_MSIX_CTL(0), 4, 0x10},
 };
 
@@ -312,6 +306,8 @@ static const struct eth_dev_ops sxe2_eth_dev_ops = {
 
 	.rxq_info_get               = sxe2_rx_queue_info_get,
 	.txq_info_get               = sxe2_tx_queue_info_get,
+	.rx_burst_mode_get          = sxe2_rx_burst_mode_get,
+	.tx_burst_mode_get          = sxe2_tx_burst_mode_get,
 };
 
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
drivers/net/sxe2/sxe2_txrx.c +173 -54

376 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h +6 -6
index cd9ebfa32f..7bb852789c 100644
@@ -6,16 +6,16 @@
 #define SXE2_TXRX_H
 #include <ethdev_driver.h>
 #include "sxe2_queue.h"
-
 void sxe2_set_common_function(struct rte_eth_dev *dev);
-
+s32 __rte_cold sxe2_tx_simple_batch_support_check(struct rte_eth_dev *dev,
+	u32 *batch_flags);
 u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
 		struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
 void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
-
 void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
-
 void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
-
+s32 sxe2_tx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused uint16_t queue_id, struct rte_eth_burst_mode *mode);
+s32 sxe2_rx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused u16 queue_id, struct rte_eth_burst_mode *mode);
 #endif
drivers/net/sxe2/sxe2_txrx_poll.c +184 -0

196 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h +2 -1
index 4924b0f41f..67da08e58e 100644
@@ -8,7 +8,8 @@
 #include "sxe2_queue.h"
 
 u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
+u16 sxe2_tx_pkts_simple(void *tx_queue,
+			struct rte_mbuf **tx_pkts, u16 nb_pkts);
 u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
 
 u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
drivers/net/sxe2/sxe2_txrx_vec.c new file +188 -0

188 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec.h new file +72 -0

72 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_common.h new file +235 -0

235 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_sse.c new file +549 -0

549 lines not on this page · raw message

Signature · 1 line
2.47.3
#63 lore raw

v7 cover Add Linkdata sxe2 driver

From: Jie Liu <[email protected]>

V7:
- Addressed AI comments

V6:
- Addressed AI comments

Jie Liu (10):
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control
drivers: add data path for Rx and Tx net/sxe2: add vectorized Rx and Tx
net/sxe2: add AVX2 vector data path for Rx and Tx

 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   4 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  46 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 971 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 315 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 384 ++++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 966 ++++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  17 +
 drivers/net/sxe2/sxe2_txrx_vec.c           | 188 ++++
 drivers/net/sxe2/sxe2_txrx_vec.h           |  78 ++
 drivers/net/sxe2/sxe2_txrx_vec_avx2.c      | 749 ++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_vec_common.h    | 235 +++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c       | 549 ++++++++++++
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 44 files changed, 10822 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_avx2.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#64 lore raw

PATCH v7 1/10 doc: add sxe2 guide and release notes

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  4 ++++
 4 files changed, 39 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +4 -0
index f012d47a4b..fa0f0f5cca 100644
@@ -64,6 +64,10 @@ New Features
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
+
 Removed Items
 -------------
 
Signature · 1 line
2.47.3
#65 lore raw

PATCH v7 2/10 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#66 lore raw

PATCH v7 3/10 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#67 lore raw

PATCH v7 4/10 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#68 lore raw

PATCH v7 5/10 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#69 lore raw

PATCH v7 6/10 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#70 lore raw

PATCH v7 7/10 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#71 lore raw

PATCH v7 8/10 drivers: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common.c     |  13 +-
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 11 files changed, 1082 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common.c +6 -7
index 537d4e9f6a..d2ed1460a3 100644
@@ -28,7 +28,7 @@ static TAILQ_HEAD(sxe2_class_drivers, sxe2_class_driver) sxe2_class_drivers_list
 static TAILQ_HEAD(sxe2_common_devices, sxe2_common_device) sxe2_common_devices_list =
 				TAILQ_HEAD_INITIALIZER(sxe2_common_devices_list);
 
-static pthread_mutex_t sxe2_common_devices_list_lock;
+static rte_spinlock_t sxe2_common_devices_list_lock;
 
 static struct rte_pci_id *sxe2_common_pci_id_table;
 
@@ -223,9 +223,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 	cdev->config.kernel_reset = false;
 	rte_ticketlock_init(&cdev->config.lock);
 
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_INSERT_TAIL(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 l_end:
 	return cdev;
@@ -233,10 +233,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 
 static void sxe2_common_device_free(struct sxe2_common_device *cdev)
 {
-
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_REMOVE(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 	rte_free(cdev);
 }
@@ -662,7 +661,7 @@ sxe2_common_init(void)
 	if (sxe2_commoin_inited)
 		goto l_end;
 
-	pthread_mutex_init(&sxe2_common_devices_list_lock, NULL);
+	rte_spinlock_init(&sxe2_common_devices_list_lock);
 #ifdef SXE2_DPDK_DEBUG
 	sxe2_common_log_stream_init();
 #endif
drivers/common/sxe2/sxe2_common_log.h +0 -105

109 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#72 lore raw

PATCH v7 9/10 net/sxe2: add vectorized Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch implements the vectorized data path for the sxe2 PMD. It utilizes SIMD instructions (e.g., SSE) to process multiple packets simultaneously, significantly improving throughput for small packet processing.

The implementation includes:
* Vectorized Rx burst function for bulk descriptor processing.
* Vectorized Tx burst function with optimized resource cleanup.
* Capability flags update to reflect vectorized path support.

---
 drivers/net/sxe2/meson.build            |   9 +
 drivers/net/sxe2/sxe2_ethdev.c          |   8 +-
 drivers/net/sxe2/sxe2_txrx.c            | 227 +++++++---
 drivers/net/sxe2/sxe2_txrx.h            |  12 +-
 drivers/net/sxe2/sxe2_txrx_poll.c       | 184 ++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h       |   3 +-
 drivers/net/sxe2/sxe2_txrx_vec.c        | 188 ++++++++
 drivers/net/sxe2/sxe2_txrx_vec.h        |  72 ++++
 drivers/net/sxe2/sxe2_txrx_vec_common.h | 235 ++++++++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c    | 549 ++++++++++++++++++++++++
 10 files changed, 1420 insertions(+), 67 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
drivers/net/sxe2/meson.build +9 -0
index 728a88b6a1..b9618f2964 100644
@@ -12,6 +12,14 @@ cflags += ['-g']
 
 deps += ['common_sxe2', 'hash','cryptodev','security']
 
+if arch_subdir == 'x86'
+        sources += files('sxe2_txrx_vec_sse.c')
+
+        if is_windows and cc.get_id() != 'clang'
+                cflags += ['-fno-asynchronous-unwind-tables']
+        endif
+endif
+
 sources += files(
         'sxe2_ethdev.c',
         'sxe2_cmd_chnl.c',
@@ -21,6 +29,7 @@ sources += files(
         'sxe2_rx.c',
         'sxe2_txrx_poll.c',
         'sxe2_txrx.c',
+        'sxe2_txrx_vec.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +2 -6
index 68d7e36cf1..7eaa1722d0 100644
@@ -58,17 +58,11 @@ static const struct rte_pci_id pci_id_sxe2_tbl[] = {
 };
 
 static struct sxe2_pci_map_addr_info sxe2_net_map_addr_info_pf[SXE2_PCI_MAP_RES_MAX_COUNT] = {
-	/* SXE2_PCI_MAP_RES_INVALID */
 	{0, 0, 0},
-	/* SXE2_PCI_MAP_RES_DOORBELL_TX */
 	{ SXE2_TXQ_LEGACY_DBLL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_DOORBELL_RX_TAIL */
 	{ SXE2_RXQ_TAIL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_DYN */
 	{ SXE2_VF_DYN_CTL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_ITR(默认使用ITR0) */
 	{ SXE2_VF_INT_ITR(0, 0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_MSIX */
 	{ SXE2_BAR4_MSIX_CTL(0), 4, 0x10},
 };
 
@@ -312,6 +306,8 @@ static const struct eth_dev_ops sxe2_eth_dev_ops = {
 
 	.rxq_info_get               = sxe2_rx_queue_info_get,
 	.txq_info_get               = sxe2_tx_queue_info_get,
+	.rx_burst_mode_get          = sxe2_rx_burst_mode_get,
+	.tx_burst_mode_get          = sxe2_tx_burst_mode_get,
 };
 
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
drivers/net/sxe2/sxe2_txrx.c +173 -54

376 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h +6 -6
index cd9ebfa32f..7bb852789c 100644
@@ -6,16 +6,16 @@
 #define SXE2_TXRX_H
 #include <ethdev_driver.h>
 #include "sxe2_queue.h"
-
 void sxe2_set_common_function(struct rte_eth_dev *dev);
-
+s32 __rte_cold sxe2_tx_simple_batch_support_check(struct rte_eth_dev *dev,
+	u32 *batch_flags);
 u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
 		struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
 void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
-
 void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
-
 void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
-
+s32 sxe2_tx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused uint16_t queue_id, struct rte_eth_burst_mode *mode);
+s32 sxe2_rx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused u16 queue_id, struct rte_eth_burst_mode *mode);
 #endif
drivers/net/sxe2/sxe2_txrx_poll.c +184 -0

196 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h +2 -1
index 4924b0f41f..67da08e58e 100644
@@ -8,7 +8,8 @@
 #include "sxe2_queue.h"
 
 u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
+u16 sxe2_tx_pkts_simple(void *tx_queue,
+			struct rte_mbuf **tx_pkts, u16 nb_pkts);
 u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
 
 u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
drivers/net/sxe2/sxe2_txrx_vec.c new file +188 -0

188 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec.h new file +72 -0

72 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_common.h new file +235 -0

235 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_sse.c new file +549 -0

549 lines not on this page · raw message

Signature · 1 line
2.47.3
#73 lore raw

v8 cover Add Linkdata sxe2 driver

From: Jie Liu <[email protected]>

V10:
- Addressed AI comments

Jie Liu (10):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control
drivers: add data path for Rx and Tx net/sxe2: add vectorized Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   4 +
 drivers/common/sxe2/meson.build            |  15 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  35 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 971 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 316 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 369 ++++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 966 ++++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  17 +
 drivers/net/sxe2/sxe2_txrx_vec.c           | 188 ++++
 drivers/net/sxe2/sxe2_txrx_vec.h           |  72 ++
 drivers/net/sxe2/sxe2_txrx_vec_common.h    | 235 +++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c       | 547 ++++++++++++
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 44 files changed, 10041 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#74 lore raw

PATCH v8 1/10 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 895412e568..d2c4485636 100644
@@ -739,6 +739,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#75 lore raw

PATCH v8 2/10 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  4 ++++
 4 files changed, 39 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +4 -0
index f012d47a4b..fa0f0f5cca 100644
@@ -64,6 +64,10 @@ New Features
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
+
 Removed Items
 -------------
 
Signature · 1 line
2.47.3
#76 lore raw

PATCH v8 3/10 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  13 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1959 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +13 -0
new file mode 100644
index 0000000000..7d448629d5
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#77 lore raw

PATCH v8 4/10 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 7d448629d5..3626fb1119 100644
@@ -9,5 +9,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#78 lore raw

PATCH v8 5/10 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  22 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3025 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +22 -0
new file mode 100644
index 0000000000..160a0de8ed
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

165 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#79 lore raw

PATCH v8 6/10 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#80 lore raw

PATCH v8 7/10 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#81 lore raw

PATCH v8 8/10 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 160a0de8ed..803e47c1aa 100644
@@ -17,6 +17,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3
#82 lore raw

PATCH v8 9/10 drivers: add data path for Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement receive and transmit burst functions for sxe2 PMD. Add sxe2_recv_pkts and sxe2_xmit_pkts as the primary data path interfaces.

The implementation includes:
- Efficient descriptor fetching and mbuf allocation for Rx.
- Descriptor setup and checksum offload handling for Tx.
- Buffer recycling and hardware tail pointer updates.
- Performance-oriented loop unrolling and prefetching where applicable.

---
 drivers/common/sxe2/sxe2_common.c     |  13 +-
 drivers/common/sxe2/sxe2_common_log.h | 105 ----
 drivers/common/sxe2/sxe2_errno.h      |   3 -
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  20 +-
 drivers/common/sxe2/sxe2_osal.h       |   4 +-
 drivers/common/sxe2/sxe2_type.h       |   1 -
 drivers/net/sxe2/meson.build          |   2 +
 drivers/net/sxe2/sxe2_ethdev.c        |  15 +-
 drivers/net/sxe2/sxe2_txrx.c          | 249 ++++++++
 drivers/net/sxe2/sxe2_txrx.h          |  21 +
 drivers/net/sxe2/sxe2_txrx_poll.c     | 782 ++++++++++++++++++++++++++
 11 files changed, 1082 insertions(+), 133 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
drivers/common/sxe2/sxe2_common.c +6 -7
index 537d4e9f6a..d2ed1460a3 100644
@@ -28,7 +28,7 @@ static TAILQ_HEAD(sxe2_class_drivers, sxe2_class_driver) sxe2_class_drivers_list
 static TAILQ_HEAD(sxe2_common_devices, sxe2_common_device) sxe2_common_devices_list =
 				TAILQ_HEAD_INITIALIZER(sxe2_common_devices_list);
 
-static pthread_mutex_t sxe2_common_devices_list_lock;
+static rte_spinlock_t sxe2_common_devices_list_lock;
 
 static struct rte_pci_id *sxe2_common_pci_id_table;
 
@@ -223,9 +223,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 	cdev->config.kernel_reset = false;
 	rte_ticketlock_init(&cdev->config.lock);
 
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_INSERT_TAIL(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 l_end:
 	return cdev;
@@ -233,10 +233,9 @@ static struct sxe2_common_device *sxe2_common_device_alloc(
 
 static void sxe2_common_device_free(struct sxe2_common_device *cdev)
 {
-
-	(void)pthread_mutex_lock(&sxe2_common_devices_list_lock);
+	rte_spinlock_lock(&sxe2_common_devices_list_lock);
 	TAILQ_REMOVE(&sxe2_common_devices_list, cdev, next);
-	(void)pthread_mutex_unlock(&sxe2_common_devices_list_lock);
+	rte_spinlock_unlock(&sxe2_common_devices_list_lock);
 
 	rte_free(cdev);
 }
@@ -662,7 +661,7 @@ sxe2_common_init(void)
 	if (sxe2_commoin_inited)
 		goto l_end;
 
-	pthread_mutex_init(&sxe2_common_devices_list_lock, NULL);
+	rte_spinlock_init(&sxe2_common_devices_list_lock);
 #ifdef SXE2_DPDK_DEBUG
 	sxe2_common_log_stream_init();
 #endif
drivers/common/sxe2/sxe2_common_log.h +0 -105

109 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h +0 -3
index 89a715eaef..1257319edf 100644
@@ -50,9 +50,6 @@ enum sxe2_status {
 	SXE2_ERR_NOLCK              = -ENOLCK,
 	SXE2_ERR_NOSYS              = -ENOSYS,
 	SXE2_ERR_NOTEMPTY           = -ENOTEMPTY,
-	SXE2_ERR_ILSEQ              = -EILSEQ,
-	SXE2_ERR_NODATA             = -ENODATA,
-	SXE2_ERR_CANCELED           = -ECANCELED,
 	SXE2_ERR_TIMEDOUT           = -ETIMEDOUT,
 
 	SXE2_ERROR                  = -150,
drivers/common/sxe2/sxe2_ioctl_chnl.c +10 -10
index 1a14d401e7..cb83fb837d 100644
@@ -37,7 +37,7 @@ sxe2_drv_cmd_exec(struct sxe2_common_device *cdev,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -123,7 +123,7 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -168,7 +168,7 @@ void
 	void *virt = NULL;
 
 	if (cdev->config.kernel_reset) {
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_err;
 	}
 
@@ -178,13 +178,13 @@ void
 		goto l_err;
 	}
 
-	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=%"PRIu64", src=0x%"PRIx64", offset=0x%"PRIx64"",
 		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 
 	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
 		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
 	if (virt == MAP_FAILED) {
-		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=%"PRIu64", offset=0x%"PRIx64", err:%s",
 			cmd_fd, len, offset, strerror(errno));
 		goto l_err;
 	}
@@ -206,12 +206,12 @@ sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
 		goto l_end;
 	}
 
-	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%"PRIx64"",
 		virt, len);
 
 	ret = munmap(virt, len);
 	if (ret < 0) {
-		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=%"PRIu64", err:%s",
 			virt, len, strerror(errno));
 		ret = SXE2_ERR_IO;
 		goto l_end;
@@ -233,7 +233,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
@@ -246,7 +246,7 @@ sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
 		goto l_end;
 	} else if (iova_mode == RTE_IOVA_VA) {
 		if (!cdev->config.support_iommu) {
-			PMD_LOG_ERR(COM, "no iommu not support va mode, plese use pa mode.");
+			PMD_LOG_ERR(COM, "no iommu not support va mode, please use pa mode.");
 			ret = SXE2_ERR_IO;
 			goto l_end;
 		}
@@ -289,7 +289,7 @@ sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova)
 
 	if (cdev->config.kernel_reset) {
 		ret = SXE2_ERR_PERM;
-		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		PMD_LOG_WARN(COM, "kernel reset, need restart app.");
 		goto l_end;
 	}
 
drivers/common/sxe2/sxe2_osal.h +1 -3
index fd6823fe98..23882f3f52 100644
@@ -29,8 +29,6 @@
 #define BIT_ULL(a) (1ULL << (a))
 #endif
 
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-
 #define BITS_PER_BYTE 8
 
 #define IS_UNICAST_ETHER_ADDR(addr)			\
@@ -88,7 +86,7 @@
 			(((n) + (typeof(n))(d) - (typeof(n))1) / (typeof(n))(d))
 #endif
 
-#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000))
+#define usleep_range(min) msleep(DIV_ROUND_UP(min, 1000))
 
 #define __bf_shf(x) ((uint32_t)rte_bsf64(x))
 
drivers/common/sxe2/sxe2_type.h +0 -1
index 56d0a11f48..fbf4a6674f 100644
@@ -8,7 +8,6 @@
 #include <sys/time.h>
 
 #include <stdlib.h>
-#include <stdio.h>
 #include <errno.h>
 #include <stdarg.h>
 #include <unistd.h>
drivers/net/sxe2/meson.build +2 -0
index 803e47c1aa..728a88b6a1 100644
@@ -19,6 +19,8 @@ sources += files(
         'sxe2_queue.c',
         'sxe2_tx.c',
         'sxe2_rx.c',
+        'sxe2_txrx_poll.c',
+        'sxe2_txrx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +11 -4
index c1a65f25ce..68d7e36cf1 100644
@@ -26,6 +26,7 @@
 #include "sxe2_cmd_chnl.h"
 #include "sxe2_tx.h"
 #include "sxe2_rx.h"
+#include "sxe2_txrx.h"
 #include "sxe2_common.h"
 #include "sxe2_common_log.h"
 #include "sxe2_host_regs.h"
@@ -131,6 +132,9 @@ static s32 sxe2_dev_start(struct rte_eth_dev *dev)
 		goto l_end;
 	}
 
+	sxe2_rx_mode_func_set(dev);
+	sxe2_tx_mode_func_set(dev);
+
 	ret = sxe2_queues_start(dev);
 	if (ret) {
 		PMD_LOG_ERR(INIT, "enable queues failed");
@@ -363,8 +367,8 @@ void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
 	for (i = 0; i < bar_info->map_cnt; i++) {
 		seg_info = &bar_info->seg_info[i];
 		if (res_type == seg_info->type) {
-			addr = (void __iomem *)((uintptr_t)seg_info->addr +
-					seg_info->page_inner_offset + reg_width	* idx_in_func);
+			addr = (uint8_t __iomem *)seg_info->addr +
+					seg_info->page_inner_offset + reg_width * idx_in_func;
 			goto l_end;
 		}
 	}
@@ -475,8 +479,9 @@ s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
 
 	map_addr = sxe2_drv_dev_mmap(adapter->cdev, bar_info->bar_idx, aligned_len, aligned_offset);
 	if (!map_addr) {
-		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%zu, page_size=%zu",
-					res_type, org_len, page_size);
+		PMD_LOG_ERR(INIT, "Failed to mmap BAR space, type=%d, len=%" PRIu64
+			", offset=%" PRIu64 ", page_size=%zu",
+					res_type, org_len, org_offset, page_size);
 		ret = SXE2_ERR_FAULT;
 		goto l_end;
 	}
@@ -760,6 +765,8 @@ static s32 sxe2_dev_init(struct rte_eth_dev *dev, struct sxe2_dev_kvargs_info *k
 
 	PMD_INIT_FUNC_TRACE();
 
+	sxe2_set_common_function(dev);
+
 	dev->dev_ops = &sxe2_eth_dev_ops;
 
 	ret = sxe2_hw_init(dev);
drivers/net/sxe2/sxe2_txrx.c new file +249 -0

249 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h new file +21 -0
new file mode 100644
index 0000000000..cd9ebfa32f
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_H
+#define SXE2_TXRX_H
+#include <ethdev_driver.h>
+#include "sxe2_queue.h"
+
+void sxe2_set_common_function(struct rte_eth_dev *dev);
+
+u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
+		struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
+
+void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
+
+#endif
drivers/net/sxe2/sxe2_txrx_poll.c new file +782 -0

782 lines not on this page · raw message

Signature · 1 line
2.47.3
#83 lore raw

PATCH v8 10/10 net/sxe2: add vectorized Rx and Tx

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch implements the vectorized data path for the sxe2 PMD. It utilizes SIMD instructions (e.g., SSE) to process multiple packets simultaneously, significantly improving throughput for small packet processing.

The implementation includes:
* Vectorized Rx burst function for bulk descriptor processing.
* Vectorized Tx burst function with optimized resource cleanup.
* Capability flags update to reflect vectorized path support.

---
 drivers/net/sxe2/meson.build            |   9 +
 drivers/net/sxe2/sxe2_ethdev.c          |   8 +-
 drivers/net/sxe2/sxe2_txrx.c            | 224 +++++++---
 drivers/net/sxe2/sxe2_txrx.h            |  12 +-
 drivers/net/sxe2/sxe2_txrx_poll.c       | 184 ++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h       |   3 +-
 drivers/net/sxe2/sxe2_txrx_vec.c        | 188 ++++++++
 drivers/net/sxe2/sxe2_txrx_vec.h        |  72 ++++
 drivers/net/sxe2/sxe2_txrx_vec_common.h | 235 ++++++++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c    | 547 ++++++++++++++++++++++++
 10 files changed, 1417 insertions(+), 65 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
drivers/net/sxe2/meson.build +9 -0
index 728a88b6a1..b9618f2964 100644
@@ -12,6 +12,14 @@ cflags += ['-g']
 
 deps += ['common_sxe2', 'hash','cryptodev','security']
 
+if arch_subdir == 'x86'
+        sources += files('sxe2_txrx_vec_sse.c')
+
+        if is_windows and cc.get_id() != 'clang'
+                cflags += ['-fno-asynchronous-unwind-tables']
+        endif
+endif
+
 sources += files(
         'sxe2_ethdev.c',
         'sxe2_cmd_chnl.c',
@@ -21,6 +29,7 @@ sources += files(
         'sxe2_rx.c',
         'sxe2_txrx_poll.c',
         'sxe2_txrx.c',
+        'sxe2_txrx_vec.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +2 -6
index 68d7e36cf1..7eaa1722d0 100644
@@ -58,17 +58,11 @@ static const struct rte_pci_id pci_id_sxe2_tbl[] = {
 };
 
 static struct sxe2_pci_map_addr_info sxe2_net_map_addr_info_pf[SXE2_PCI_MAP_RES_MAX_COUNT] = {
-	/* SXE2_PCI_MAP_RES_INVALID */
 	{0, 0, 0},
-	/* SXE2_PCI_MAP_RES_DOORBELL_TX */
 	{ SXE2_TXQ_LEGACY_DBLL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_DOORBELL_RX_TAIL */
 	{ SXE2_RXQ_TAIL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_DYN */
 	{ SXE2_VF_DYN_CTL(0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_ITR(默认使用ITR0) */
 	{ SXE2_VF_INT_ITR(0, 0), 0, 4},
-	/* SXE2_PCI_MAP_RES_IRQ_MSIX */
 	{ SXE2_BAR4_MSIX_CTL(0), 4, 0x10},
 };
 
@@ -312,6 +306,8 @@ static const struct eth_dev_ops sxe2_eth_dev_ops = {
 
 	.rxq_info_get               = sxe2_rx_queue_info_get,
 	.txq_info_get               = sxe2_tx_queue_info_get,
+	.rx_burst_mode_get          = sxe2_rx_burst_mode_get,
+	.tx_burst_mode_get          = sxe2_tx_burst_mode_get,
 };
 
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
drivers/net/sxe2/sxe2_txrx.c +172 -52

375 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx.h +6 -6
index cd9ebfa32f..7bb852789c 100644
@@ -6,16 +6,16 @@
 #define SXE2_TXRX_H
 #include <ethdev_driver.h>
 #include "sxe2_queue.h"
-
 void sxe2_set_common_function(struct rte_eth_dev *dev);
-
+s32 __rte_cold sxe2_tx_simple_batch_support_check(struct rte_eth_dev *dev,
+	u32 *batch_flags);
 u16 sxe2_tx_pkts_prepare(__rte_unused void *tx_queue,
 		struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
 void sxe2_tx_mode_func_set(struct rte_eth_dev *dev);
-
 void __rte_cold sxe2_rx_queue_reset(struct sxe2_rx_queue *rxq);
-
 void sxe2_rx_mode_func_set(struct rte_eth_dev *dev);
-
+s32 sxe2_tx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused uint16_t queue_id, struct rte_eth_burst_mode *mode);
+s32 sxe2_rx_burst_mode_get(struct rte_eth_dev *dev,
+			__rte_unused u16 queue_id, struct rte_eth_burst_mode *mode);
 #endif
drivers/net/sxe2/sxe2_txrx_poll.c +184 -0

196 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h +2 -1
index 4924b0f41f..67da08e58e 100644
@@ -8,7 +8,8 @@
 #include "sxe2_queue.h"
 
 u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
-
+u16 sxe2_tx_pkts_simple(void *tx_queue,
+			struct rte_mbuf **tx_pkts, u16 nb_pkts);
 u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
 
 u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
drivers/net/sxe2/sxe2_txrx_vec.c new file +188 -0

188 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec.h new file +72 -0

72 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_common.h new file +235 -0

235 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_vec_sse.c new file +547 -0

547 lines not on this page · raw message

Signature · 1 line
2.47.3
#84 lore raw

v9 cover Add Linkdata sxe2 driver

From: Jie Liu <[email protected]>

V9:
- Addressed AI comments

Jie Liu (10):
mailmap: add Jie Liu
doc: add sxe2 guide and release notes
drivers: add sxe2 basic structures common/sxe2: add base driver skeleton
drivers: add base driver probe skeleton
drivers: support PCI BAR mapping
common/sxe2: add ioctl interface for DMA map and unmap net/sxe2: support queue setup and control
drivers: add data path for Rx and Tx net/sxe2: add vectorized Rx and Tx

 .mailmap                                   |   1 +
 doc/guides/nics/features/sxe2.ini          |  11 +
 doc/guides/nics/index.rst                  |   1 +
 doc/guides/nics/sxe2.rst                   |  23 +
 doc/guides/rel_notes/release_26_07.rst     |   4 +
 drivers/common/sxe2/meson.build            |  21 +
 drivers/common/sxe2/sxe2_common.c          | 683 +++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 ++
 drivers/common/sxe2/sxe2_common_log.c      |  75 ++
 drivers/common/sxe2/sxe2_common_log.h      | 263 ++++++
 drivers/common/sxe2/sxe2_errno.h           | 110 +++
 drivers/common/sxe2/sxe2_host_regs.h       | 707 +++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h    |  33 +
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 326 +++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  63 ++
 drivers/common/sxe2/sxe2_osal.h            | 582 ++++++++++++
 drivers/common/sxe2/sxe2_type.h            |  64 ++
 drivers/meson.build                        |   1 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  43 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 +
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 971 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 315 +++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 +
 drivers/net/sxe2/sxe2_queue.h              | 227 +++++
 drivers/net/sxe2/sxe2_rx.c                 | 579 ++++++++++++
 drivers/net/sxe2/sxe2_rx.h                 |  34 +
 drivers/net/sxe2/sxe2_tx.c                 | 447 ++++++++++
 drivers/net/sxe2/sxe2_tx.h                 |  32 +
 drivers/net/sxe2/sxe2_txrx.c               | 367 ++++++++
 drivers/net/sxe2/sxe2_txrx.h               |  21 +
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.c          | 966 ++++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  17 +
 drivers/net/sxe2/sxe2_txrx_vec.c           | 188 ++++
 drivers/net/sxe2/sxe2_txrx_vec.h           |  72 ++
 drivers/net/sxe2/sxe2_txrx_vec_common.h    | 235 +++++
 drivers/net/sxe2/sxe2_txrx_vec_sse.c       | 547 ++++++++++++
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++
 44 files changed, 10052 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.c
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_vec_sse.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
Signature · 1 line
2.47.3
#85 lore raw

PATCH v9 1/10 mailmap: add Jie Liu

From: Jie Liu <[email protected]>

---
 .mailmap | 1 +
 1 file changed, 1 insertion(+)
.mailmap +1 -0
index 895412e568..d2c4485636 100644
@@ -739,6 +739,7 @@ Jiawen Wu <[email protected]>
 Jiayu Hu <[email protected]> <[email protected]>
 Jie Hai <[email protected]>
 Jie Liu <[email protected]>
+Jie Liu <[email protected]>
 Jie Pan <[email protected]>
 Jie Wang <[email protected]>
 Jie Zhou <[email protected]> <[email protected]>
Signature · 1 line
2.47.3
#86 lore raw

PATCH v9 2/10 doc: add sxe2 guide and release notes

In reply to [email protected]

From: Jie Liu <[email protected]>

Add a new guide for SXE2 PMD in the nics directory. The guide contains driver capabilities, prerequisites, and compilation/usage instructions.

Update the release notes to announce the addition of the sxe2 network driver.

---
 doc/guides/nics/features/sxe2.ini      | 11 +++++++++++
 doc/guides/nics/index.rst              |  1 +
 doc/guides/nics/sxe2.rst               | 23 +++++++++++++++++++++++
 doc/guides/rel_notes/release_26_07.rst |  4 ++++
 4 files changed, 39 insertions(+)
 create mode 100644 doc/guides/nics/features/sxe2.ini
 create mode 100644 doc/guides/nics/sxe2.rst
doc/guides/nics/features/sxe2.ini new file +11 -0
new file mode 100644
index 0000000000..cbf5a773fb
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'sxe2' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Queue start/stop     = Y
+Linux                = Y
\ No newline at end of file
doc/guides/nics/index.rst +1 -0
index cb818284fe..e20be478f8 100644
@@ -68,6 +68,7 @@ Network Interface Controller Drivers
     rnp
     sfc_efx
     softnic
+    sxe2
     tap
     thunderx
     txgbe
doc/guides/nics/sxe2.rst new file +23 -0
new file mode 100644
index 0000000000..2f9ba91c33
@@ -0,0 +1,23 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+
+SXE2 Poll Mode Driver
+======================
+
+The sxe2 PMD (**librte_net_sxe2**) provides poll mode driver support for
+10/25/50/100/200 Gbps Network Adapters.
+The embedded switch, Physical Functions (PF),
+and SR-IOV Virtual Functions (VF) are supported
+
+Implementation details
+----------------------
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
doc/guides/rel_notes/release_26_07.rst +4 -0
index f012d47a4b..fa0f0f5cca 100644
@@ -64,6 +64,10 @@ New Features
   * ``--auto-probing`` enables the initial bus probing, which is the current default behavior.
 
 
+* **Added Linkdata sxe2 ethernet driver.**
+
+  Added network driver for the Linkdata Network Adapters.
+
 Removed Items
 -------------
 
Signature · 1 line
2.47.3
#87 lore raw

PATCH v9 3/10 drivers: add sxe2 basic structures

In reply to [email protected]

From: Jie Liu <[email protected]>

This patch adds the base infrastructure for the sxe2 common library. It includes the mandatory OS abstraction layer (OSAL), common structure definitions, error codes, and the logging system implementation.

Specifically, this commit:
- Implements the logging stream management using RTE_LOG_LINE.
- Defines device-specific error codes and status registers.
- Adds the initial meson build configuration for the common library.

---
 drivers/common/sxe2/meson.build         |  19 +
 drivers/common/sxe2/sxe2_common_log.c   |  75 +++
 drivers/common/sxe2/sxe2_common_log.h   | 368 ++++++++++++
 drivers/common/sxe2/sxe2_errno.h        | 113 ++++
 drivers/common/sxe2/sxe2_host_regs.h    | 707 ++++++++++++++++++++++++
 drivers/common/sxe2/sxe2_internal_ver.h |  33 ++
 drivers/common/sxe2/sxe2_osal.h         | 584 +++++++++++++++++++
 drivers/common/sxe2/sxe2_type.h         |  65 +++
 drivers/meson.build                     |   1 +
 9 files changed, 1965 insertions(+)
 create mode 100644 drivers/common/sxe2/meson.build
 create mode 100644 drivers/common/sxe2/sxe2_common_log.c
 create mode 100644 drivers/common/sxe2/sxe2_common_log.h
 create mode 100644 drivers/common/sxe2/sxe2_errno.h
 create mode 100644 drivers/common/sxe2/sxe2_host_regs.h
 create mode 100644 drivers/common/sxe2/sxe2_internal_ver.h
 create mode 100644 drivers/common/sxe2/sxe2_osal.h
 create mode 100644 drivers/common/sxe2/sxe2_type.h
drivers/common/sxe2/meson.build new file +19 -0
new file mode 100644
index 0000000000..09ce556f70
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (c) 2023 Corigine, Inc.
+
+if is_windows
+        build = false
+        reason = 'only supported on Linux'
+        subdir_done()
+endif
+
+cflags += [
+        '-DSXE2_DPDK_DRIVER',
+        '-DSXE2_DPDK_DEBUG',
+]
+
+deps += ['bus_pci', 'net', 'eal', 'ethdev']
+
+sources = files(
+        'sxe2_common_log.c',
+)
drivers/common/sxe2/sxe2_common_log.c new file +75 -0

75 lines not on this page · raw message

drivers/common/sxe2/sxe2_common_log.h new file +368 -0

368 lines not on this page · raw message

drivers/common/sxe2/sxe2_errno.h new file +113 -0

113 lines not on this page · raw message

drivers/common/sxe2/sxe2_host_regs.h new file +707 -0

707 lines not on this page · raw message

drivers/common/sxe2/sxe2_internal_ver.h new file +33 -0
new file mode 100644
index 0000000000..a41913fdd8
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_INTERNAL_VER_H__
+#define __SXE2_INTERNAL_VER_H__
+
+#define SXE2_VER_MAJOR_OFFSET (16)
+#define SXE2_MK_VER(major, minor) \
+	(major << SXE2_VER_MAJOR_OFFSET | minor)
+#define SXE2_MK_VER_MAJOR(ver) ((ver >> SXE2_VER_MAJOR_OFFSET) & 0xff)
+#define SXE2_MK_VER_MINOR(ver) ((ver) & 0xff)
+
+#define SXE2_ITR_VER_MAJOR_V100    1
+#define SXE2_ITR_VER_MAJOR_V200    2
+
+#define SXE2_ITR_VER_MAJOR      1
+#define SXE2_ITR_VER_MINOR      1
+#define SXE2_ITR_VER SXE2_MK_VER(SXE2_ITR_VER_MAJOR, SXE2_ITR_VER_MINOR)
+
+#define SXE2_CTRL_VER_IS_V100(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V100)
+#define SXE2_CTRL_VER_IS_V200(ver)  (SXE2_MK_VER_MAJOR(ver) == SXE2_ITR_VER_MAJOR_V200)
+
+#define SXE2LIB_ITR_VER_MAJOR      1
+#define SXE2LIB_ITR_VER_MINOR      1
+#define SXE2LIB_ITR_VER     SXE2_MK_VER(SXE2LIB_ITR_VER_MAJOR, SXE2LIB_ITR_VER_MINOR)
+
+#define SXE2_DRV_CLI_VER_MAJOR      1
+#define SXE2_DRV_CLI_VER_MINOR      1
+#define SXE2_DRV_CLI_VER \
+	SXE2_MK_VER(SXE2_DRV_CLI_VER_MAJOR, SXE2_DRV_CLI_VER_MINOR)
+
+#endif
drivers/common/sxe2/sxe2_osal.h new file +584 -0

584 lines not on this page · raw message

drivers/common/sxe2/sxe2_type.h new file +65 -0

65 lines not on this page · raw message

drivers/meson.build +1 -0
index 6ae102e943..d4ae512bae 100644
@@ -12,6 +12,7 @@ subdirs = [
         'common/qat',     # depends on bus.
         'common/sfc_efx', # depends on bus.
         'common/zsda',    # depends on bus.
+        'common/sxe2',    # depends on bus.
         'mempool',        # depends on common and bus.
         'dma',            # depends on common and bus.
         'net',            # depends on common, bus, mempool
Signature · 1 line
2.47.3
#88 lore raw

PATCH v9 4/10 common/sxe2: add base driver skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the sxe2 PMD skeleton by implementing the PCI probe and remove functions. This includes the setup and cleanup of a character device used for control path communication between the user space and the hardware.

The character device provides an interface for ioctl-based management operations, supporting device-specific configuration.

---
 drivers/common/sxe2/meson.build            |   2 +
 drivers/common/sxe2/sxe2_common.c          | 636 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_common.h          |  86 +++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 161 ++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.h      | 141 +++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |  45 ++
 6 files changed, 1071 insertions(+)
 create mode 100644 drivers/common/sxe2/sxe2_common.c
 create mode 100644 drivers/common/sxe2/sxe2_common.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.c
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl.h
 create mode 100644 drivers/common/sxe2/sxe2_ioctl_chnl_func.h
drivers/common/sxe2/meson.build +2 -0
index 09ce556f70..b4ad4ed58d 100644
@@ -15,5 +15,7 @@ cflags += [
 deps += ['bus_pci', 'net', 'eal', 'ethdev']
 
 sources = files(
+        'sxe2_common.c',
         'sxe2_common_log.c',
+        'sxe2_ioctl_chnl.c',
 )
drivers/common/sxe2/sxe2_common.c new file +636 -0

636 lines not on this page · raw message

drivers/common/sxe2/sxe2_common.h new file +86 -0

86 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.c new file +161 -0

161 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl.h new file +141 -0

141 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
2.47.3
#89 lore raw

PATCH v9 5/10 drivers: add base driver probe skeleton

In reply to [email protected]

From: Jie Liu <[email protected]>

Initialize the eth_dev_ops for the sxe2 PMD. This includes the implementation of mandatory ethdev operations such as dev_configure, dev_start, dev_stop, and dev_infos_get.

Set up the basic infrastructure for device initialization to allow the driver to be recognized as a valid ethernet device within the DPDK framework.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c      |  27 +
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 +
 drivers/net/meson.build                    |   1 +
 drivers/net/sxe2/meson.build               |  28 +
 drivers/net/sxe2/sxe2_cmd_chnl.c           | 319 +++++++++++
 drivers/net/sxe2/sxe2_cmd_chnl.h           |  33 ++
 drivers/net/sxe2/sxe2_drv_cmd.h            | 398 +++++++++++++
 drivers/net/sxe2/sxe2_ethdev.c             | 633 +++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h             | 295 ++++++++++
 drivers/net/sxe2/sxe2_irq.h                |  49 ++
 drivers/net/sxe2/sxe2_queue.c              |  39 ++
 drivers/net/sxe2/sxe2_queue.h              | 227 ++++++++
 drivers/net/sxe2/sxe2_txrx_common.h        | 541 ++++++++++++++++++
 drivers/net/sxe2/sxe2_txrx_poll.h          |  16 +
 drivers/net/sxe2/sxe2_vsi.c                | 211 +++++++
 drivers/net/sxe2/sxe2_vsi.h                | 205 +++++++
 16 files changed, 3031 insertions(+)
 create mode 100644 drivers/net/sxe2/meson.build
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.c
 create mode 100644 drivers/net/sxe2/sxe2_cmd_chnl.h
 create mode 100644 drivers/net/sxe2/sxe2_drv_cmd.h
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.c
 create mode 100644 drivers/net/sxe2/sxe2_ethdev.h
 create mode 100644 drivers/net/sxe2/sxe2_irq.h
 create mode 100644 drivers/net/sxe2/sxe2_queue.c
 create mode 100644 drivers/net/sxe2/sxe2_queue.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_common.h
 create mode 100644 drivers/net/sxe2/sxe2_txrx_poll.h
 create mode 100644 drivers/net/sxe2/sxe2_vsi.c
 create mode 100644 drivers/net/sxe2/sxe2_vsi.h
drivers/common/sxe2/sxe2_ioctl_chnl.c +27 -0
index db09dd3126..e22731065d 100644
@@ -159,3 +159,30 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 l_end:
 	return ret;
 }
+
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
+{
+	s32 ret = SXE2_SUCCESS;
+
+	if (cdev->config.kernel_reset) {
+		ret = SXE2_ERR_PERM;
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_end;
+	}
+
+	PMD_LOG_DEBUG(COM, "Munmap virt=%p, len=0x%zx",
+		virt, len);
+
+	ret = munmap(virt, len);
+	if (ret < 0) {
+		PMD_LOG_ERR(COM, "Failed to munmap, virt=%p, len=0x%zx, err:%s",
+			virt, len, strerror(errno));
+		ret = SXE2_ERR_IO;
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 0c3cb9caea..376c5e3ac7 100644
@@ -38,6 +38,15 @@ __rte_internal
 s32
 sxe2_drv_dev_handshark(struct sxe2_common_device *cdev);
 
+__rte_internal
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx,
+		u64 len, u64 offset);
+
+__rte_internal
+s32
+sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
+
 #ifdef __cplusplus
 }
 #endif
drivers/net/meson.build +1 -0
index c7dae4ad27..4e8ccb945f 100644
@@ -58,6 +58,7 @@ drivers = [
         'rnp',
         'sfc',
         'softnic',
+        'sxe2',
         'tap',
         'thunderx',
         'txgbe',
drivers/net/sxe2/meson.build new file +28 -0
new file mode 100644
index 0000000000..98d0b7fc6d
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+#执行子目录base,并获取目标对象
+
+if is_windows
+        build = false
+        reason = 'only supported on Linux'
+        subdir_done()
+endif
+
+cflags += ['-DSXE2_DPDK_DRIVER']
+cflags += ['-DFPGA_VER_ASIC']
+if arch_subdir != 'arm'
+        cflags += ['-Werror']
+endif
+
+cflags += ['-g']
+
+deps += ['common_sxe2', 'hash','cryptodev','security']
+
+sources += files(
+        'sxe2_ethdev.c',
+        'sxe2_cmd_chnl.c',
+        'sxe2_vsi.c',
+        'sxe2_queue.c',
+)
+
+allow_internal_get_api = true
drivers/net/sxe2/sxe2_cmd_chnl.c new file +319 -0

319 lines not on this page · raw message

drivers/net/sxe2/sxe2_cmd_chnl.h new file +33 -0
new file mode 100644
index 0000000000..200fe0be00
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_CMD_CHNL_H__
+#define __SXE2_CMD_CHNL_H__
+
+#include "sxe2_ethdev.h"
+#include "sxe2_drv_cmd.h"
+#include "sxe2_ioctl_chnl_func.h"
+
+s32 sxe2_drv_dev_caps_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_caps_resp *dev_caps);
+
+s32 sxe2_drv_dev_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_info_resp *dev_info_resp);
+
+s32 sxe2_drv_dev_fw_info_get(struct sxe2_adapter *adapter,
+		struct sxe2_drv_dev_fw_info_resp *dev_fw_info_resp);
+
+s32 sxe2_drv_vsi_add(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_vsi_del(struct sxe2_adapter *adapter, struct sxe2_vsi *vsi);
+
+s32 sxe2_drv_rxq_switch(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, bool enable);
+
+s32 sxe2_drv_txq_switch(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, bool enable);
+
+s32 sxe2_drv_rxq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_rx_queue *rxq, u16 rxq_cnt);
+
+s32 sxe2_drv_txq_ctxt_cfg(struct sxe2_adapter *adapter, struct sxe2_tx_queue *txq, u16 txq_cnt);
+
+#endif
drivers/net/sxe2/sxe2_drv_cmd.h new file +398 -0

398 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.c new file +633 -0

633 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h new file +295 -0

295 lines not on this page · raw message

drivers/net/sxe2/sxe2_irq.h new file +49 -0

49 lines not on this page · raw message

drivers/net/sxe2/sxe2_queue.c new file +39 -0
new file mode 100644
index 0000000000..98343679f6
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#include "sxe2_ethdev.h"
+#include "sxe2_queue.h"
+#include "sxe2_common_log.h"
+#include "sxe2_errno.h"
+
+void sxe2_sw_queue_ctx_hw_cap_set(struct sxe2_adapter *adapter,
+		struct sxe2_drv_queue_caps *q_caps)
+{
+	adapter->q_ctxt.qp_cnt_assign = q_caps->queues_cnt;
+	adapter->q_ctxt.base_idx_in_pf = q_caps->base_idx_in_pf;
+}
+
+s32 sxe2_queues_init(struct rte_eth_dev *dev)
+{
+	s32 ret = SXE2_SUCCESS;
+	u16 buf_size;
+	u16 frame_size;
+	struct sxe2_rx_queue *rxq;
+	u16 nb_rxq;
+
+	frame_size = dev->data->mtu + SXE2_ETH_OVERHEAD;
+	for (nb_rxq = 0; nb_rxq < dev->data->nb_rx_queues; nb_rxq++) {
+		rxq = dev->data->rx_queues[nb_rxq];
+		if (!rxq)
+			continue;
+
+		buf_size = rte_pktmbuf_data_room_size(rxq->mb_pool) - RTE_PKTMBUF_HEADROOM;
+		rxq->rx_buf_len = RTE_ALIGN_FLOOR(buf_size, (1 << SXE2_RXQ_CTX_DBUFF_SHIFT));
+		rxq->rx_buf_len = RTE_MIN(rxq->rx_buf_len, SXE2_RX_MAX_DATA_BUF_SIZE);
+		if (frame_size > rxq->rx_buf_len)
+			dev->data->scattered_rx = 1;
+	}
+
+	return ret;
+}
drivers/net/sxe2/sxe2_queue.h new file +227 -0

227 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_common.h new file +541 -0

541 lines not on this page · raw message

drivers/net/sxe2/sxe2_txrx_poll.h new file +16 -0
new file mode 100644
index 0000000000..4924b0f41f
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef SXE2_TXRX_POLL_H
+#define SXE2_TXRX_POLL_H
+
+#include "sxe2_queue.h"
+
+u16 sxe2_tx_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+u16 sxe2_rx_pkts_scattered_split(void *rx_queue, struct rte_mbuf **rx_pkts, u16 nb_pkts);
+
+#endif
drivers/net/sxe2/sxe2_vsi.c new file +211 -0

211 lines not on this page · raw message

drivers/net/sxe2/sxe2_vsi.h new file +205 -0

159 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.47.3

Part of the diff is not shown here. View the raw message.

#90 lore raw

PATCH v9 6/10 drivers: support PCI BAR mapping

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement PCI BAR (Base Address Register) mapping and unmapping logic to enable MMIO (Memory Mapped I/O) access to hardware registers.

The driver retrieves the BAR0 virtual address from the PCI resource during the probing phase. This mapping is used for subsequent register-level operations. Proper cleanup is implemented in the device close path.

---
 drivers/common/sxe2/sxe2_ioctl_chnl.c |  34 +++
 drivers/net/sxe2/sxe2_ethdev.c        | 307 ++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_ethdev.h        |  18 ++
 3 files changed, 359 insertions(+)
drivers/common/sxe2/sxe2_ioctl_chnl.c +34 -0
index e22731065d..2bd7c2b2eb 100644
@@ -160,6 +160,40 @@ sxe2_drv_dev_handshark(struct sxe2_common_device *cdev)
 	return ret;
 }
 
+RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_mmap)
+void
+*sxe2_drv_dev_mmap(struct sxe2_common_device *cdev, u8 bar_idx, u64 len, u64 offset)
+{
+	s32 cmd_fd = 0;
+	void *virt = NULL;
+
+	if (cdev->config.kernel_reset) {
+		PMD_LOG_WARN(COM, "kernel reseted, need restart app.");
+		goto l_err;
+	}
+
+	cmd_fd = SXE2_CDEV_TO_CMD_FD(cdev);
+	if (cmd_fd < 0) {
+		PMD_LOG_ERR(COM, "Failed to exec cmd, fd=%d", cmd_fd);
+		goto l_err;
+	}
+
+	PMD_LOG_DEBUG(COM, "fd=%d, bar idx=%d, len=0x%zx, src=0x%"PRIx64", offset=0x%"PRIx64"",
+		bar_idx, cmd_fd, len, offset, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+
+	virt = mmap(NULL, len, PROT_READ | PROT_WRITE,
+		MAP_SHARED, cmd_fd, SXE2_COM_PCI_OFFSET_GEN(bar_idx, offset));
+	if (virt == MAP_FAILED) {
+		PMD_LOG_ERR(COM, "Failed mmap, cmd_fd=%d, len=0x%zx, offset=0x%"PRIx64", err:%s",
+			cmd_fd, len, offset, strerror(errno));
+		goto l_err;
+	}
+
+	return virt;
+l_err:
+	return NULL;
+}
+
 RTE_EXPORT_INTERNAL_SYMBOL(sxe2_drv_dev_munmap)
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len)
drivers/net/sxe2/sxe2_ethdev.c +307 -0

349 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +18 -0
index dc3a3175d1..fb7813ef80 100644
@@ -292,4 +292,22 @@ struct sxe2_adapter {
 #define SXE2_DEV_PRIVATE_TO_ADAPTER(dev) \
 	((struct sxe2_adapter *)(dev)->data->dev_private)
 
+#define SXE2_DEV_TO_PCI(eth_dev) \
+		RTE_DEV_TO_PCI((eth_dev)->device)
+
+struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type);
+
+s32 sxe2_dev_pci_seg_map(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u64 org_len, u64 org_offset);
+
+s32 sxe2_dev_pci_res_seg_map(struct sxe2_adapter *adapter, u32 res_type,
+		u32 item_cnt, u32 item_base);
+
+void sxe2_dev_pci_seg_unmap(struct sxe2_adapter *adapter, u32 res_type);
+
+s32 sxe2_dev_pci_map_init(struct rte_eth_dev *dev);
+
+void sxe2_dev_pci_map_uinit(struct rte_eth_dev *dev);
+
 #endif
Signature · 1 line
2.47.3
#91 lore raw

PATCH v9 7/10 common/sxe2: add ioctl interface for DMA map and unmap

In reply to [email protected]

From: Jie Liu <[email protected]>

Implement DMA mapping and unmapping functionality using ioctl calls. This allows the driver to configure the hardware's IOMMU/DMA tables, ensuring the device can safely access memory buffers allocated by the userspace.

The mapping is established during device initialization or queue setup and is revoked during device closure to prevent memory leaks and ensure hardware security.

---
 drivers/common/sxe2/sxe2_common.c          |  48 ++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl.c      | 104 +++++++++++++++++++++
 drivers/common/sxe2/sxe2_ioctl_chnl_func.h |   9 ++
 3 files changed, 161 insertions(+)
drivers/common/sxe2/sxe2_common.c +48 -0
index dfdefb8b78..537d4e9f6a 100644
@@ -466,12 +466,60 @@ static s32 sxe2_common_pci_remove(struct rte_pci_device *pci_dev)
 	return ret;
 }
 
+static s32 sxe2_common_pci_dma_map(struct rte_pci_device *pci_dev,
+		void *addr,	u64 iova, size_t len)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_map(cdev, (u64)(uintptr_t)addr, iova, len);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
+static s32 sxe2_common_pci_dma_unmap(struct rte_pci_device *pci_dev,
+		void *addr __rte_unused, u64 iova, size_t len __rte_unused)
+{
+	struct sxe2_common_device *cdev;
+	s32 ret = SXE2_ERROR;
+
+	cdev = sxe2_rtedev_to_cdev(&pci_dev->device);
+	if (cdev == NULL) {
+		ret = SXE2_ERR_NODEV;
+		PMD_LOG_ERR(COM, "Fail to get remove device.");
+		goto l_end;
+	}
+
+	ret = sxe2_drv_dev_dma_unmap(cdev, iova);
+	if (ret) {
+		PMD_LOG_ERR(COM, "Fail to dma map, ret=%d", ret);
+		goto l_end;
+	}
+
+l_end:
+	return ret;
+}
+
 static struct rte_pci_driver sxe2_common_pci_driver = {
 	.driver = {
 		   .name = SXE2_COMMON_PCI_DRIVER_NAME,
 	},
 	.probe = sxe2_common_pci_probe,
 	.remove = sxe2_common_pci_remove,
+	.dma_map = sxe2_common_pci_dma_map,
+	.dma_unmap = sxe2_common_pci_dma_unmap,
 };
 
 static u32 sxe2_common_pci_id_table_size_get(const struct rte_pci_id *id_table)
drivers/common/sxe2/sxe2_ioctl_chnl.c +104 -0

107 lines not on this page · raw message

drivers/common/sxe2/sxe2_ioctl_chnl_func.h +9 -0
index 376c5e3ac7..e8f983e40e 100644
@@ -47,6 +47,15 @@ __rte_internal
 s32
 sxe2_drv_dev_munmap(struct sxe2_common_device *cdev, void *virt, u64 len);
 
+__rte_internal
+s32
+sxe2_drv_dev_dma_map(struct sxe2_common_device *cdev, u64 vaddr,
+		u64 iova, u64 size);
+
+__rte_internal
+s32
+sxe2_drv_dev_dma_unmap(struct sxe2_common_device *cdev, u64 iova);
+
 #ifdef __cplusplus
 }
 #endif
Signature · 1 line
2.47.3
#92 lore raw

PATCH v9 8/10 net/sxe2: support queue setup and control

In reply to [email protected]

From: Jie Liu <[email protected]>

Add support for Rx and Tx queue setup, release, and management. Implement eth_dev_ops callbacks for rx_queue_setup, tx_queue_setup, rx_queue_release, and tx_queue_release.

This includes:
- Allocating memory for hardware ring descriptors.
- Initializing software ring structures and hardware head/tail pointers.
- Implementing proper resource cleanup logic to prevent memory leaks during queue reconfiguration or device close.

---
 drivers/net/sxe2/meson.build   |   2 +
 drivers/net/sxe2/sxe2_ethdev.c |  64 +++-
 drivers/net/sxe2/sxe2_ethdev.h |   3 +
 drivers/net/sxe2/sxe2_rx.c     | 579 +++++++++++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_rx.h     |  34 ++
 drivers/net/sxe2/sxe2_tx.c     | 447 +++++++++++++++++++++++++
 drivers/net/sxe2/sxe2_tx.h     |  32 ++
 7 files changed, 1143 insertions(+), 18 deletions(-)
 create mode 100644 drivers/net/sxe2/sxe2_rx.c
 create mode 100644 drivers/net/sxe2/sxe2_rx.h
 create mode 100644 drivers/net/sxe2/sxe2_tx.c
 create mode 100644 drivers/net/sxe2/sxe2_tx.h
drivers/net/sxe2/meson.build +2 -0
index 98d0b7fc6d..61467a4e31 100644
@@ -23,6 +23,8 @@ sources += files(
         'sxe2_cmd_chnl.c',
         'sxe2_vsi.c',
         'sxe2_queue.c',
+        'sxe2_tx.c',
+        'sxe2_rx.c',
 )
 
 allow_internal_get_api = true
drivers/net/sxe2/sxe2_ethdev.c +46 -18

94 lines not on this page · raw message

drivers/net/sxe2/sxe2_ethdev.h +3 -0
index fb7813ef80..7999e4f331 100644
@@ -295,6 +295,9 @@ struct sxe2_adapter {
 #define SXE2_DEV_TO_PCI(eth_dev) \
 		RTE_DEV_TO_PCI((eth_dev)->device)
 
+void __iomem *sxe2_pci_map_addr_get(struct sxe2_adapter *adapter,
+		enum sxe2_pci_map_resource res_type, u16 idx_in_func);
+
 struct sxe2_pci_map_bar_info *sxe2_dev_get_bar_info(struct sxe2_adapter *adapter,
 		enum sxe2_pci_map_resource res_type);
 
drivers/net/sxe2/sxe2_rx.c new file +579 -0

579 lines not on this page · raw message

drivers/net/sxe2/sxe2_rx.h new file +34 -0
new file mode 100644
index 0000000000..7c6239b387
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_RX_H__
+#define __SXE2_RX_H__
+
+#include "sxe2_queue.h"
+
+s32 __rte_cold sxe2_rx_queue_setup(struct rte_eth_dev *dev,
+				u16 queue_idx, u16 nb_desc, u32 socket_id,
+				const struct rte_eth_rxconf *rx_conf,
+				struct rte_mempool *mp);
+
+s32 __rte_cold sxe2_rx_queue_stop(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+void __rte_cold sxe2_rx_queue_mbufs_release(struct sxe2_rx_queue *rxq);
+
+void __rte_cold sxe2_rx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_rxqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_rxq_info *qinfo);
+
+s32 __rte_cold sxe2_rx_queue_start(struct rte_eth_dev *dev, u16 rx_queue_id);
+
+s32 __rte_cold sxe2_rxqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_rxqs_all_stop(struct rte_eth_dev *dev);
+
+struct rte_mbuf *sxe2_mbuf_raw_alloc(struct rte_mempool *mp);
+
+#endif
drivers/net/sxe2/sxe2_tx.c new file +447 -0

447 lines not on this page · raw message

drivers/net/sxe2/sxe2_tx.h new file +32 -0
new file mode 100644
index 0000000000..58b668e337
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C), 2025, Wuxi Stars Micro System Technologies Co., Ltd.
+ */
+
+#ifndef __SXE2_TX_H__
+#define __SXE2_TX_H__
+#include "sxe2_queue.h"
+
+void __rte_cold sxe2_tx_queue_reset(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_start(struct rte_eth_dev *dev, u16 queue_id);
+
+void sxe2_tx_queue_mbufs_release(struct sxe2_tx_queue *txq);
+
+s32 __rte_cold sxe2_tx_queue_stop(struct rte_eth_dev *dev, u16 queue_id);
+
+s32 __rte_cold sxe2_tx_queue_setup(struct rte_eth_dev *dev,
+		u16 queue_idx, u16 nb_desc, u32 socket_id,
+		const struct rte_eth_txconf *tx_conf);
+
+void __rte_cold sxe2_tx_queue_release(struct rte_eth_dev *dev, u16 queue_idx);
+
+void __rte_cold sxe2_all_txqs_release(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_tx_queue_info_get(struct rte_eth_dev *dev, u16 queue_id,
+		struct rte_eth_txq_info *qinfo);
+
+s32 __rte_cold sxe2_txqs_all_start(struct rte_eth_dev *dev);
+
+void __rte_cold sxe2_txqs_all_stop(struct rte_eth_dev *dev);
+
+#endif
Signature · 1 line
2.47.3