vhost-user.rst: clarify when rings are started
RFC 1/1 vhost-user.rst: clarify when rings are started
Jorge Moreira <[email protected]> pointed out that the ring state machine is underspecified. In the discussion that followed, we discovered that the spec says one thing and implementations do something else. This patch updates the spec to reflect how things are actually implemented across widely-used front-ends and back-ends including QEMU, crosvm, rust-vmm, and DPDK. Do this while taking care not to make any other existing implementations non-compliant by changing the sepc.
The spec says rings are started when a kick is received but the implementations actually start rings when VHOST_USER_SET_VRING_KICK is received.
Reconcile this as follows:
- Clarify that a ring can be stopped and then started again. The back-end must resume processing available requests when the ring is restarted.
- Update the spec to say rings are started when VHOST_USER_SET_VRING_KICK is received.
- Ensure compatibility by saying front-ends SHOULD inject a kick in case the back-end strictly implemented the old spec.
- Avoid future back-end dependencies on injected kicks by saying that back-ends SHOULD NOT expect a kick to start rings.
This way implementors have clarity on how things work while still allowing compatibility for existing implementations.
---
This is an RFC because I will update hw/virtio/vhost-user.c and libvhost-user once we've agreed on the spec wording.
docs/interop/vhost-user.rst | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
docs/interop/vhost-user.rst +18 -6
@@ -462,12 +462,24 @@ Rings have two independent states: started/stopped, and enabled/disabled. * started and enabled: The back-end must process the ring normally, i.e. process all requests and execute them. -Each ring is initialized in a stopped and disabled state. The back-end -must start a ring upon receiving a kick (that is, detecting that file -descriptor is readable) on the descriptor specified by -``VHOST_USER_SET_VRING_KICK`` or receiving the in-band message -``VHOST_USER_VRING_KICK`` if negotiated, and stop a ring upon receiving -``VHOST_USER_GET_VRING_BASE``. +Each ring is initialized in a stopped and disabled state. Rings are started +with ``VHOST_USER_SET_VRING_KICK`` and stopped with +``VHOST_USER_GET_VRING_BASE``. A stopped ring enters the started state again +with ``VHOST_USER_SET_VRING_KICK`` and the back-end resumes processing +requests. + +Note that previous versions of this specification stated that rings start when +the back-end receives a kick (that is, detecting that file descriptor is +readable) on the descriptor specified by ``VHOST_USER_SET_VRING_KICK`` or +receiving the in-band message ``VHOST_USER_VRING_KICK`` if negotiated. +Widely-used front-ends and back-ends did not implement this behavior and it +complicates poll mode back-ends that do not rely on the kick file descriptor. + +For compatibility with back-ends that implemented the start on kick behavior, +front-ends SHOULD inject a kick after ``VHOST_USER_SET_VRING_KICK``. This +ensures that the back-end processes any available requests in the ring. +Back-ends SHOULD NOT rely on receiving a kick after +``VHOST_USER_SET_VRING_KICK``. Rings can be enabled or disabled by ``VHOST_USER_SET_VRING_ENABLE``.
Signature · 1 line
2.54.0
Quoted 43 lines · Stefan Hajnoczi
Jorge Moreira <[email protected]> pointed out that the ring state machine is underspecified. In the discussion that followed, we discovered that the spec says one thing and implementations do something else. This patch updates the spec to reflect how things are actually implemented across widely-used front-ends and back-ends including QEMU, crosvm, rust-vmm, and DPDK. Do this while taking care not to make any other existing implementations non-compliant by changing the sepc.
The spec says rings are started when a kick is received but the implementations actually start rings when
VHOST_USER_SET_VRING_KICKis received.Reconcile this as follows:
- Clarify that a ring can be stopped and then started again. The back-end must resume processing available requests when the ring is restarted.
- Update the spec to say rings are started whenVHOST_USER_SET_VRING_KICKis received.
- Ensure compatibility by saying front-ends SHOULD inject a kick in case the back-end strictly implemented the old spec.
- Avoid future back-end dependencies on injected kicks by saying that back-ends SHOULD NOT expect a kick to start rings.This way implementors have clarity on how things work while still allowing compatibility for existing implementations.
Reported-by Jorge Moreira <[email protected]>Cc "Michael S . Tsirkin" <[email protected]>Cc Stefano Garzarella <[email protected]>Signed-off-by Stefan Hajnoczi <[email protected]>---
This is an RFC because I will updatehw/virtio/vhost-user.cand libvhost-user once we've agreed on the spec wording.
docs/interop/vhost-user.rst| 24 ++++++++++++++++++------1 file changed, 18 insertions(+), 6 deletions(-)docs/interop/vhost-user.rst +0
-0@@ -462,12 +462,24 @@ Rings have two independent states: started/stopped, and enabled/disabled. * started and enabled: The back-end must process the ring normally, i.e.
docs/interop/vhost-user.rst Rings have two independent states: started/stopped, and enabled/disabled. · line 466
Quoted 10 lines
docs/interop/vhost-user.rst +2
-6process all requests and execute them. -Each ring is initialized in a stopped and disabled state. The back-end -must start a ring upon receiving a kick (that is, detecting that file -descriptor is readable) on the descriptor specified by -``VHOST_USER_SET_VRING_KICK`` or receiving the in-band message -``VHOST_USER_VRING_KICK`` if negotiated, and stop a ring upon receiving -``VHOST_USER_GET_VRING_BASE``. +Each ring is initialized in a stopped and disabled state. Rings are started +with ``VHOST_USER_SET_VRING_KICK`` and stopped with
In the VHOST_USER_SET_VRING_KICK description we say:
Note that if the protocol feature
``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` has been negotiated this message isn't necessary as the ring is also started on the ``VHOST_USER_VRING_KICK`` message, it may however still be used to set an event file descriptor (which will be preferred over the message) or to enable polling.
I think we need to clarify a bit more what happens if VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is negotiated. In that case, I don't think we can necessarily require the frontend to send VHOST_USER_SET_VRING_KICK to start the rings.
What about: Rings are started with ``VHOST_USER_SET_VRING_KICK`` (or ``VHOST_USER_VRING_KICK`` if negotiated) ...
... A stopped ring enters the started state again with ``VHOST_USER_SET_VRING_KICK`` (or ``VHOST_USER_VRING_KICK`` if negotiated) and the back-end resumes processing requests.
Quoted 6 lines
docs/interop/vhost-user.rst +6
-0+``VHOST_USER_GET_VRING_BASE``. A stopped ring enters the started state again +with ``VHOST_USER_SET_VRING_KICK`` and the back-end resumes processing +requests. + +Note that previous versions of this specification stated that rings start when +the back-end receives a kick (that is, detecting that file descriptor is
docs/interop/vhost-user.rst Rings have two independent states: started/stopped, and enabled/disabled. · line 482
Quoted 10 lines
docs/interop/vhost-user.rst +10
-0+readable) on the descriptor specified by ``VHOST_USER_SET_VRING_KICK`` or +receiving the in-band message ``VHOST_USER_VRING_KICK`` if negotiated. +Widely-used front-ends and back-ends did not implement this behavior and it +complicates poll mode back-ends that do not rely on the kick file descriptor. + +For compatibility with back-ends that implemented the start on kick behavior, +front-ends SHOULD inject a kick after ``VHOST_USER_SET_VRING_KICK``. This +ensures that the back-end processes any available requests in the ring. +Back-ends SHOULD NOT rely on receiving a kick after +``VHOST_USER_SET_VRING_KICK``.
The rest LGTM.
Thanks,
Stefano
Quoted 6 lines
Rings can be enabled or disabled by ``VHOST_USER_SET_VRING_ENABLE``.
Signature · 1 line
2.54.0
Quoted 69 lines · Stefano Garzarella
Quoted 43 lines · Stefan Hajnoczi
Jorge Moreira <[email protected]> pointed out that the ring state machine is underspecified. In the discussion that followed, we discovered that the spec says one thing and implementations do something else. This patch updates the spec to reflect how things are actually implemented across widely-used front-ends and back-ends including QEMU, crosvm, rust-vmm, and DPDK. Do this while taking care not to make any other existing implementations non-compliant by changing the sepc.
The spec says rings are started when a kick is received but the implementations actually start rings when
VHOST_USER_SET_VRING_KICKis received.Reconcile this as follows:
- Clarify that a ring can be stopped and then started again. The back-end must resume processing available requests when the ring is restarted.
- Update the spec to say rings are started whenVHOST_USER_SET_VRING_KICKis received.
- Ensure compatibility by saying front-ends SHOULD inject a kick in case the back-end strictly implemented the old spec.
- Avoid future back-end dependencies on injected kicks by saying that back-ends SHOULD NOT expect a kick to start rings.This way implementors have clarity on how things work while still allowing compatibility for existing implementations.
Reported-by Jorge Moreira <[email protected]>Cc "Michael S . Tsirkin" <[email protected]>Cc Stefano Garzarella <[email protected]>Signed-off-by Stefan Hajnoczi <[email protected]>---
This is an RFC because I will updatehw/virtio/vhost-user.cand libvhost-user once we've agreed on the spec wording.
docs/interop/vhost-user.rst| 24 ++++++++++++++++++------1 file changed, 18 insertions(+), 6 deletions(-)docs/interop/vhost-user.rst +0
-0@@ -462,12 +462,24 @@ Rings have two independent states: started/stopped, and enabled/disabled. * started and enabled: The back-end must process the ring normally, i.e.docs/interop/vhost-user.rst Rings have two independent states: started/stopped, and enabled/disabled. · line 466
Quoted 10 lines
docs/interop/vhost-user.rst +2
-6process all requests and execute them. -Each ring is initialized in a stopped and disabled state. The back-end -must start a ring upon receiving a kick (that is, detecting that file -descriptor is readable) on the descriptor specified by -``VHOST_USER_SET_VRING_KICK`` or receiving the in-band message -``VHOST_USER_VRING_KICK`` if negotiated, and stop a ring upon receiving -``VHOST_USER_GET_VRING_BASE``. +Each ring is initialized in a stopped and disabled state. Rings are started +with ``VHOST_USER_SET_VRING_KICK`` and stopped withIn the
VHOST_USER_SET_VRING_KICKdescription we say:Note that if the protocol feature
``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` has been negotiated this message isn't necessary as the ring is also started on the ``VHOST_USER_VRING_KICK`` message, it may however still be used to set an event file descriptor (which will be preferred over the message) or to enable polling.I think we need to clarify a bit more what happens if
VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONSis negotiated. In that case, I don't think we can necessarily require the frontend to sendVHOST_USER_SET_VRING_KICKto start the rings.
Quoted 6 lines
What about: Rings are started with ``VHOST_USER_SET_VRING_KICK`` (or ``VHOST_USER_VRING_KICK`` if negotiated) ...
... A stopped ring enters the started state again with ``VHOST_USER_SET_VRING_KICK`` (or ``VHOST_USER_VRING_KICK`` if negotiated) and the back-end resumes processing requests.
Sounds good to me. I will send a non-RFC version including this change.
Stefan